6245620 su driver install as sun4u specific should really go in /kernel/drv

--HG--
rename : usr/src/uts/sun4u/io/su_driver.c => usr/src/uts/sun4/io/su_driver.c
rename : usr/src/uts/sun4u/sys/sudev.h => usr/src/uts/sun4/sys/sudev.h

1 files changed, 400 insertions, 0 deletions

diff --git a/usr/src/uts/sun4/sys/sudev.h b/usr/src/uts/sun4/sys/sudev.h
new file mode 100644
index 0000000000..2effc7528e
--- /dev/null
+++ b/usr/src/uts/sun4/sys/sudev.h
@@ -0,0 +1,400 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License, Version 1.0 only
+ * (the "License").  You may not use this file except in compliance
+ * with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*	Copyright (c) 1990, 1991 UNIX System Laboratories, Inc.	*/
+/*	Copyright (c) 1984, 1986, 1987, 1988, 1989, 1990 AT&T	*/
+/*	  All Rights Reserved 	*/
+
+/*
+ * Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
+ * Use is subject to license terms.
+ */
+
+#ifndef	_SYS_SUDEV_H
+#define	_SYS_SUDEV_H
+
+#pragma ident	"%Z%%M%	%I%	%E% SMI"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <sys/tty.h>
+#include <sys/ksynch.h>
+#include <sys/dditypes.h>
+#include <sys/types.h>
+#include <sys/kstat.h>
+
+/*
+ * Definitions for INS8250 / 16550  chips
+ */
+
+/* defined as offsets from the data register */
+#define	DAT		0 	/* receive/transmit data */
+#define	ICR		1  	/* interrupt control register */
+#define	ISR		2   	/* interrupt status register */
+#define	LCR		3   	/* line control register */
+#define	MCR		4   	/* modem control register */
+#define	LSR		5   	/* line status register */
+#define	MSR		6   	/* modem status register */
+#define	DLL		0   	/* divisor latch (lsb) */
+#define	DLH		1   	/* divisor latch (msb) */
+#define	FIFOR		ISR	/* FIFO register for 16550 */
+#define	OUTB(offset, value)	ddi_put8(asy->asy_handle, \
+				    asy->asy_ioaddr+offset, value)
+#define	INB(offset)	ddi_get8(asy->asy_handle, asy->asy_ioaddr+offset)
+
+/*
+ * INTEL 8210-A/B & 16450/16550 Registers Structure.
+ */
+
+/* Line Control Register */
+#define	WLS0		0x01	/* word length select bit 0 */
+#define	WLS1		0x02	/* word length select bit 2 */
+#define	STB		0x04	/* number of stop bits */
+#define	PEN		0x08	/* parity enable */
+#define	EPS		0x10	/* even parity select */
+#define	SETBREAK 	0x40	/* break key */
+#define	DLAB		0x80	/* divisor latch access bit */
+#define	RXLEN   	0x03   	/* # of data bits per received/xmitted char */
+#define	STOP1   	0x00
+#define	STOP2   	0x04
+#define	PAREN   	0x08
+#define	PAREVN  	0x10
+#define	PARMARK 	0x20
+#define	SNDBRK  	0x40
+
+
+#define	BITS5		0x00	/* 5 bits per char */
+#define	BITS6		0x01	/* 6 bits per char */
+#define	BITS7		0x02	/* 7 bits per char */
+#define	BITS8		0x03	/* 8 bits per char */
+
+/* baud rate definitions */
+#define	ASY110		1047	/* 110 baud rate for serial console */
+#define	ASY150		768	/* 150 baud rate for serial console */
+#define	ASY300		384	/* 300 baud rate for serial console */
+#define	ASY600		192	/* 600 baud rate for serial console */
+#define	ASY1200		96	/* 1200 baud rate for serial console */
+#define	ASY2400		48	/* 2400 baud rate for serial console */
+#define	ASY4800		24	/* 4800 baud rate for serial console */
+#define	ASY9600		12	/* 9600 baud rate for serial console */
+
+/* Line Status Register */
+#define	RCA		0x01	/* data ready */
+#define	OVRRUN		0x02	/* overrun error */
+#define	PARERR		0x04	/* parity error */
+#define	FRMERR		0x08	/* framing error */
+#define	BRKDET  	0x10	/* a break has arrived */
+#define	XHRE		0x20	/* tx hold reg is now empty */
+#define	XSRE		0x40	/* tx shift reg is now empty */
+#define	RFBE		0x80	/* rx FIFO Buffer error */
+
+/* Interrupt Id Regisger */
+#define	MSTATUS		0x00	/* modem status changed */
+#define	NOINTERRUPT	0x01	/* no interrupt pending */
+#define	TxRDY		0x02	/* Transmitter Holding Register Empty */
+#define	RxRDY		0x04	/* Receiver Data Available */
+#define	FFTMOUT 	0x0c	/* FIFO timeout - 16550AF */
+#define	RSTATUS 	0x06	/* Receiver Line Status */
+
+/* Interrupt Enable Register */
+#define	RIEN		0x01	/* Received Data Ready */
+#define	TIEN		0x02	/* Tx Hold Register Empty */
+#define	SIEN		0x04	/* Receiver Line Status */
+#define	MIEN		0x08	/* Modem Status */
+
+/* Modem Control Register */
+#define	DTR		0x01	/* Data Terminal Ready */
+#define	RTS		0x02	/* Request To Send */
+#define	OUT1		0x04	/* Aux output - not used */
+#define	OUT2		0x08	/* dis/enable int per INO on ALI1535D+ */
+#define	ASY_LOOP	0x10	/* loopback for diagnostics */
+
+/* Modem Status Register */
+#define	DCTS		0x01	/* Delta Clear To Send */
+#define	DDSR		0x02	/* Delta Data Set Ready */
+#define	DRI		0x04	/* Trail Edge Ring Indicator */
+#define	DDCD		0x08	/* Delta Data Carrier Detect */
+#define	CTS		0x10	/* Clear To Send */
+#define	DSR		0x20	/* Data Set Ready */
+#define	RI		0x40	/* Ring Indicator */
+#define	DCD		0x80	/* Data Carrier Detect */
+
+#define	DELTAS(x)	((x)&(DCTS|DDSR|DRI|DDCD))
+#define	STATES(x)	((x)(CTS|DSR|RI|DCD))
+
+/* flags for FCR (FIFO Control register) */
+#define	FIFO_OFF	0x00	/* fifo disabled */
+#define	FIFO_ON		0x01	/* fifo enabled */
+#define	FIFOEN		0x8f	/* fifo enabled, w/ 8 byte trigger */
+#define	FIFORCLR	0x8b	/* Clear receiver FIFO only */
+
+#define	FIFORXFLSH	0x02	/* flush receiver FIFO */
+#define	FIFOTXFLSH	0x04	/* flush transmitter FIFO */
+#define	FIFODMA		0x08	/* DMA mode 1 */
+#define	FIFO_TRIG_1	0x00	/* 1 byte trigger level */
+#define	FIFO_TRIG_4	0x40	/* 4 byte trigger level */
+#define	FIFO_TRIG_8	0x80	/* 8 byte trigger level */
+#define	FIFO_TRIG_14	0xC0	/* 14 byte trigger level */
+
+/*
+ * Defines for ioctl calls (VP/ix)
+ */
+
+#define	AIOC		('A'<<8)
+#define	AIOCINTTYPE	(AIOC|60)	/* set interrupt type */
+#define	AIOCDOSMODE	(AIOC|61)	/* set DOS mode */
+#define	AIOCNONDOSMODE	(AIOC|62)	/* reset DOS mode */
+#define	AIOCSERIALOUT	(AIOC|63)	/* serial device data write */
+#define	AIOCSERIALIN	(AIOC|64)	/* serial device data read */
+#define	AIOCSETSS	(AIOC|65)	/* set start/stop chars */
+#define	AIOCINFO	(AIOC|66)	/* tell usr what device we are */
+
+/* Ioctl alternate names used by VP/ix */
+#define	VPC_SERIAL_DOS		AIOCDOSMODE
+#define	VPC_SERIAL_NONDOS	AIOCNONDOSMODE
+#define	VPC_SERIAL_INFO		AIOCINFO
+#define	VPC_SERIAL_OUT		AIOCSERIALOUT
+#define	VPC_SERIAL_IN		AIOCSERIALIN
+
+/* Serial in/out requests */
+#define	SO_DIVLLSB	1
+#define	SO_DIVLMSB	2
+#define	SO_LCR		3
+#define	SO_MCR		4
+#define	SI_MSR		1
+#define	SIO_MASK(elem)		(1<<((elem)-1))
+
+#define	OVERRUN		040000
+#define	FRERROR		020000
+#define	PERROR		010000
+#define	S_ERRORS	(PERROR|OVERRUN|FRERROR)
+
+/*
+ * Ring buffer and async line management definitions.
+ */
+#define	RINGBITS	16		/* # of bits in ring ptrs */
+#define	RINGSIZE	(1<<RINGBITS)   /* size of ring */
+#define	RINGMASK	(RINGSIZE-1)
+#define	RINGFRAC	12		/* fraction of ring to force flush */
+
+#define	RING_INIT(ap)  ((ap)->async_rput = (ap)->async_rget = 0)
+#define	RING_CNT(ap)   (((ap)->async_rput - (ap)->async_rget) & RINGMASK)
+#define	RING_FRAC(ap)  ((int)RING_CNT(ap) >= (int)(RINGSIZE/RINGFRAC))
+#define	RING_POK(ap, n) ((int)RING_CNT(ap) < (int)(RINGSIZE-(n)))
+#define	RING_PUT(ap, c) \
+	((ap)->async_ring[(ap)->async_rput++ & RINGMASK] =  (uchar_t)(c))
+#define	RING_UNPUT(ap) ((ap)->async_rput--)
+#define	RING_GOK(ap, n) ((int)RING_CNT(ap) >= (int)(n))
+#define	RING_GET(ap)   ((ap)->async_ring[(ap)->async_rget++ & RINGMASK])
+#define	RING_EAT(ap, n) ((ap)->async_rget += (n))
+#define	RING_MARK(ap, c, s) \
+	((ap)->async_ring[(ap)->async_rput++ & RINGMASK] = ((uchar_t)(c)|(s)))
+#define	RING_UNMARK(ap) \
+	((ap)->async_ring[((ap)->async_rget) & RINGMASK] &= ~S_ERRORS)
+#define	RING_ERR(ap, c) \
+	((ap)->async_ring[((ap)->async_rget) & RINGMASK] & (c))
+
+/*
+ * Serial kstats structure and macro to increment an individual kstat
+ */
+struct serial_kstats {
+		kstat_named_t	ringover;	/* ring buffer overflow */
+		kstat_named_t	siloover;	/* silo overflow */
+};
+
+#define	INC64_KSTAT(asy, stat) (asy)->kstats.stat.value.ui64++;
+
+/*
+ * Hardware channel common data. One structure per port.
+ * Each of the fields in this structure is required to be protected by a
+ * mutex lock at the highest priority at which it can be altered.
+ * The asy_flags, and asy_next fields can be altered by interrupt
+ * handling code that must be protected by the mutex whose handle is
+ * stored in asy_excl_hi.  All others can be protected by the asy_excl
+ * mutex, which is lower priority and adaptive.
+ */
+struct asycom {
+	int		asy_flags;	/* random flags  */
+					/* protected by asy_excl_hi lock */
+	uint_t		asy_hwtype;	/* HW type: ASY82510, etc. */
+	uint_t		asy_use_fifo;	/* HW FIFO use it or not ?? */
+	uint_t		asy_fifo_buf;	/* With FIFO = 16, otherwise = 1 */
+	uchar_t		*asy_ioaddr;	/* i/o address of ASY port */
+	uint_t		asy_vect;	/* IRQ number */
+	boolean_t	suspended;	/* TRUE if driver suspended */
+	caddr_t		asy_priv;	/* protocol private data */
+	dev_info_t	*asy_dip;	/* dev_info */
+	long		asy_unit;	/* which port */
+	ddi_iblock_cookie_t asy_iblock;
+	kmutex_t	*asy_excl;	/* asy adaptive mutex */
+	kmutex_t	*asy_excl_hi;	/* asy spinlock mutex */
+	ddi_acc_handle_t asy_handle;    /* ddi_get/put handle */
+	ushort_t	asy_rsc_console;	/* RSC console port */
+	ushort_t	asy_rsc_control;	/* RSC control port */
+	ushort_t	asy_lom_console;	/* LOM console port */
+	uint_t		asy_xmit_count;	/* Count the no of xmits in one intr */
+	uint_t		asy_out_of_band_xmit; /* Out of band xmission */
+	uint_t		asy_rx_count;	/* No. of bytes rx'eved in one intr */
+	uchar_t		asy_device_type; /* Currently used for this device */
+	uchar_t		asy_trig_level;	/* Receive FIFO trig level */
+	kmutex_t	*asy_soft_lock;	/* soft lock for gaurding softpend. */
+	int		asysoftpend;	/* Flag indicating soft int pending. */
+	ddi_softintr_t asy_softintr_id;
+	ddi_iblock_cookie_t asy_soft_iblock;
+	int		asy_baud_divisor_factor; /* for different chips */
+	int		asy_ocflags; /* old cflags used in asy_program() */
+	uint_t		asy_cached_msr; /* a cache for the MSR register */
+	int		asy_speed_cap; /* maximum baud rate */
+	kstat_t		*sukstat;	/* ptr to serial kstats */
+	struct serial_kstats kstats;	/* serial kstats structure */
+	boolean_t	inperim;	/* in streams q perimeter */
+};
+
+/*
+ * Asychronous protocol private data structure for ASY.
+ * Each of the fields in the structure is required to be protected by
+ * the lower priority lock except the fields that are set only at
+ * base level but cleared (with out lock) at interrupt level.
+ */
+struct asyncline {
+	int		async_flags;	/* random flags */
+	kcondvar_t	async_flags_cv; /* condition variable for flags */
+	dev_t		async_dev;	/* device major/minor numbers */
+	mblk_t		*async_xmitblk;	/* transmit: active msg block */
+	struct asycom	*async_common;	/* device common data */
+	tty_common_t 	async_ttycommon; /* tty driver common data */
+	bufcall_id_t	async_wbufcid;	/* id for pending write-side bufcall */
+	timeout_id_t	async_polltid;	/* softint poll timeout id */
+
+	/*
+	 * The following fields are protected by the asy_excl_hi lock.
+	 * Some, such as async_flowc, are set only at the base level and
+	 * cleared (without the lock) only by the interrupt level.
+	 */
+	uchar_t		*async_optr;	/* output pointer */
+	int		async_ocnt;	/* output count */
+	uint_t		async_rput;	/* producing pointer for input */
+	uint_t		async_rget;	/* consuming pointer for input */
+	uchar_t		async_flowc;	/* flow control char to send */
+
+	/*
+	 * Each character stuffed into the ring has two bytes associated
+	 * with it.  The first byte is used to indicate special conditions
+	 * and the second byte is the actual data.  The ring buffer
+	 * needs to be defined as ushort_t to accomodate this.
+	 */
+	ushort_t	async_ring[RINGSIZE];
+
+	short		async_break;	/* break count */
+
+	union {
+		struct {
+			uchar_t _hw;	/* overrun (hw) */
+			uchar_t _sw;	/* overrun (sw) */
+		} _a;
+		ushort_t uover_overrun;
+	} async_uover;
+#define	async_overrun		async_uover._a.uover_overrun
+#define	async_hw_overrun	async_uover._a._hw
+#define	async_sw_overrun	async_uover._a._sw
+	short		async_ext;	/* modem status change count */
+	short		async_work;	/* work to do flag */
+	uchar_t		async_queue_full; /* Streams Queue Full */
+	uchar_t		async_ringbuf_overflow; /* when ring buffer overflows */
+	timeout_id_t	async_timer;	/* close drain progress timer */
+};
+
+/* definitions for async_flags field */
+#define	ASYNC_EXCL_OPEN	 0x10000000	/* exclusive open */
+#define	ASYNC_WOPEN	 0x00000001	/* waiting for open to complete */
+#define	ASYNC_ISOPEN	 0x00000002	/* open is complete */
+#define	ASYNC_OUT	 0x00000004	/* line being used for dialout */
+#define	ASYNC_CARR_ON	 0x00000008	/* carrier on last time we looked */
+#define	ASYNC_STOPPED	 0x00000010	/* output is stopped */
+#define	ASYNC_DELAY	 0x00000020	/* waiting for delay to finish */
+#define	ASYNC_BREAK	 0x00000040	/* waiting for break to finish */
+#define	ASYNC_BUSY	 0x00000080	/* waiting for transmission to finish */
+#define	ASYNC_DRAINING	 0x00000100	/* waiting for output to drain */
+#define	ASYNC_SERVICEIMM 0x00000200	/* queue soft interrupt as soon as */
+#define	ASYNC_HW_IN_FLOW 0x00000400	/* input flow control in effect */
+#define	ASYNC_HW_OUT_FLW 0x00000800	/* output flow control in effect */
+#define	ASYNC_PROGRESS	 0x00001000	/* made progress on output effort */
+#define	ASYNC_CLOSING	 0x00002000	/* closing the stream */
+
+/* asy_hwtype definitions */
+#define	ASY82510	0x1
+#define	ASY16550AF	0x2
+#define	ASY8250		0x3		/* 8250 or 16450 or 16550 */
+
+/* definitions for asy_flags field */
+#define	ASY_NEEDSOFT	0x00000001
+#define	ASY_DOINGSOFT	0x00000002
+#define	ASY_PPS		0x00000004
+#define	ASY_PPS_EDGE	0x00000008
+#define	ASY_IGNORE_CD	0x00000040
+
+/*
+ * Different devices this driver supports and what it is used to drive
+ * currently
+ */
+#define	ASY_KEYBOARD 	0x01
+#define	ASY_MOUSE	0x02
+#define	ASY_SERIAL	0x03
+
+/*
+ * RSC_DEVICE defines the bit in the minor device number that specifies
+ * the tty line is to be used for console/controlling a RSC device.
+ */
+#define	RSC_DEVICE	(1 << (NBITSMINOR32 - 4))
+
+/*
+ * OUTLINE defines the high-order flag bit in the minor device number that
+ * controls use of a tty line for dialin and dialout simultaneously.
+ */
+#define	OUTLINE		(1 << (NBITSMINOR32 - 1))
+#define	UNIT(x)		(getminor(x) & ~(OUTLINE | RSC_DEVICE))
+
+/* suggested number of soft state instances */
+#define	SU_INITIAL_SOFT_ITEMS	0x02
+
+/*
+ * ASYSETSOFT macro to pend a soft interrupt if one isn't already pending.
+ */
+
+#define	ASYSETSOFT(asy)	{		\
+	if (mutex_tryenter(asy->asy_soft_lock)) {	\
+		asy->asy_flags |= ASY_NEEDSOFT;	\
+		if (!asy->asysoftpend) {		\
+			asy->asysoftpend = 1;	\
+			mutex_exit(asy->asy_soft_lock);\
+			ddi_trigger_softintr(asy->asy_softintr_id);\
+		} else					\
+			mutex_exit(asy->asy_soft_lock);\
+	}						\
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif	/* _SYS_SUDEV_H */