diff options
Diffstat (limited to 'usr/src/lib/storage/common/stgcom.h')
| -rw-r--r-- | usr/src/lib/storage/common/stgcom.h | 512 |
1 files changed, 512 insertions, 0 deletions
diff --git a/usr/src/lib/storage/common/stgcom.h b/usr/src/lib/storage/common/stgcom.h new file mode 100644 index 0000000000..9bef52b1c5 --- /dev/null +++ b/usr/src/lib/storage/common/stgcom.h @@ -0,0 +1,512 @@ +/* + * CDDL HEADER START + * + * The contents of this file are subject to the terms of the + * Common Development and Distribution License (the "License"). + * You may not use this file except in compliance with the License. + * + * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE + * or http://www.opensolaris.org/os/licensing. + * See the License for the specific language governing permissions + * and limitations under the License. + * + * When distributing Covered Code, include this CDDL HEADER in each + * file and include the License file at usr/src/OPENSOLARIS.LICENSE. + * If applicable, add the following below this CDDL HEADER, with the + * fields enclosed by brackets "[]" replaced with your own identifying + * information: Portions Copyright [yyyy] [name of copyright owner] + * + * CDDL HEADER END + */ +/* + * Copyright 2008 Sun Microsystems, Inc. All rights reserved. + * Use is subject to license terms. + */ + +/* + * Common definitions for Storage Utilities libraries + */ + +#ifndef _STGCOM_H +#define _STGCOM_H + + + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * This header file contains the error definitions + * to handle the SCSI, path format, Device, Fibre Channel + * ioctl, Enclosure, and IB specific Errors. It also + * contains physical names for device paths. + */ + +/* + * Define for physical name of children of fcp + */ +#define FC_CTLR ":devctl" +#define DRV_NAME_SD "sd@" +#define DRV_NAME_SSD "ssd@" +#define DRV_NAME_ST "st@" +#define SLSH_DRV_NAME_SD "/sd@" +#define SLSH_DRV_NAME_SSD "/ssd@" +#define SLSH_DRV_NAME_ST "/st@" +#define DRV_PART_NAME ",0:c,raw" +#define SES_NAME "ses@" +#define SLSH_SES_NAME "/ses@" +#define SLASH_SES "/ses" +#define SES_DIR "/dev/es" +#define DEV_DSK_DIR "/dev/dsk" +#define DEV_RDIR "/dev/rdsk" +#define DEV_TAPE_DIR "/dev/rmt" +#define L_ARCH_4M "sun4m" +#define VHCI_NODE "/devices/scsi_vhci:devctl" +#define SCSI_VHCI "/devices/scsi_vhci/" +#define SLSH_VHCI_DISK "/ssd@g" + +/* + * controller/nexus node postfix strings + */ +#define CTLR_POSTFIX ":ctlr" +#define DEVCTL_POSTFIX ":devctl" + +/* + * I18N message number ranges + * This file: 15500 - 15999 + * Shared common messages: 1 - 1999 + */ + +/* + * All error numbers below this base value + * are assumed to be UNIX error codes. + */ + +#define L_BASE L_SCSI_ERROR + +/* + * SCSI Errors + * + */ +/* SCSI error */ +#define L_SCSI_ERROR 0x10000 + +/* Receive Diagnostics: Transfer length is not word aligned */ +#define L_RD_INVLD_TRNSFR_LEN 0x11002 + +/* No disk element found in Receive diag. page */ +#define L_RD_NO_DISK_ELEM 0x11003 + +/* Illegal mode sense page length */ +#define L_ILLEGAL_MODE_SENSE_PAGE 0x11004 + +/* Invalid number of ENV. SENSE pages */ +#define L_INVALID_NO_OF_ENVSEN_PAGES 0x11005 + +/* Buffer is *too* small to hold more than 8 pages */ +#define L_INVALID_BUF_LEN 0x11006 + +/* Scsi_vhci errors */ +#define L_SCSI_VHCI_ERROR 0x11007 +#define L_SCSI_VHCI_ALREADY_ACTIVE 0x11008 +#define L_SCSI_VHCI_NO_STANDBY 0x11009 +#define L_SCSI_VHCI_FAILOVER_NOTSUP 0x1100a +#define L_SCSI_VHCI_FAILOVER_BUSY 0x1100b + + +/* + * Error definitions + * for Format Errors. + */ +#define L_INVALID_PATH 0x20200 + +/* Failed to open a given path */ +#define L_OPEN_PATH_FAIL 0x20001 + +/* Invalid password length. */ +#define L_INVALID_PASSWORD_LEN 0x20002 + +/* Given disk physical path is not valid. */ +#define L_INVLD_PHYS_PATH_TO_DISK 0x20004 + +/* Invalid name id found in the physical path */ +#define L_INVLD_ID_FOUND 0x20005 + +/* Invalid WWN format found */ +#define L_INVLD_WWN_FORMAT 0x20006 + +/* No WWN found in the disk's physical path */ +#define L_NO_WWN_FOUND_IN_PATH 0x20007 + +/* No Loop address found in the phys path */ +#define L_NO_LOOP_ADDRS_FOUND 0x20008 + +/* Invalid port number found in the phys path */ +#define L_INVLD_PORT_IN_PATH 0x20009 + +/* Invalid LED request */ +#define L_INVALID_LED_RQST 0x20010 + +/* Invalid path format */ +#define L_INVALID_PATH_FORMAT 0x20011 + +/* failed to get the physical path */ +#define L_NO_PHYS_PATH 0x20012 + +/* failed to get the ses path */ +#define L_NO_SES_PATH 0x20015 + +/* No "/" found in the physical path */ +#define L_INVLD_PATH_NO_SLASH_FND 0x20100 + +/* No "@" found in the physical path */ +#define L_INVLD_PATH_NO_ATSIGN_FND 0x20101 + +/* Invalid slot (slot < 0 or slot > 10). */ +#define L_INVALID_SLOT 0x20102 + +/* No valid path to a device */ +#define L_NO_VALID_PATH 0x20103 + +/* No disk devices found in /dev/rdsk directory */ +#define L_NO_DISK_DEV_FOUND 0x20104 + +/* No tape devices found in /dev/rmt directory */ +#define L_NO_TAPE_DEV_FOUND 0x20105 + +/* Device's Node WWN not found in the WWN list. */ +#define L_NO_NODE_WWN_IN_WWNLIST 0x20106 + +/* Device's Node WWN not found in the Box list. */ +#define L_NO_NODE_WWN_IN_BOXLIST 0x20107 + +/* Null WWN list found. */ +#define L_NULL_WWN_LIST 0x20108 + +/* No devices found. */ +#define L_NO_DEVICES_FOUND 0x20109 + +/* function arg error in wwn_list process */ +#define L_PROC_WWN_ARG_ERROR 0x20110 + +/* WWN property not found */ +#define L_NO_WWN_PROP_FOUND 0x20111 + +/* No driver nodes found for requested driver */ +#define L_NO_DRIVER_NODES_FOUND 0x20112 + +/* ULP error on device(s) */ +#define L_GET_DEV_LIST_ULP_FAILURE 0x20150 + +/* + * Error definitions + * for FC Loop (FC4 devices). + */ +/* Invalid loop map found */ +#define L_INVALID_LOOP_MAP 0x20202 + +/* SFIOCGMAP ioctl failed */ +#define L_SFIOCGMAP_IOCTL_FAIL 0x20203 + +/* FCIO_GETMAP ioctl failed */ +#define L_FCIO_GETMAP_IOCTL_FAIL 0x20204 + +/* FCIO_LINKSTATUS ioctl failed */ +#define L_FCIO_LINKSTATUS_FAILED 0x20205 + +/* FCIO_GETMAP: Invalid # of entries */ +#define L_FCIOGETMAP_INVLD_LEN 0x20206 + +/* FCIO_FORCE_LIP ioctl failed. */ +#define L_FCIO_FORCE_LIP_FAIL 0x20207 + +/* Error definitions for FC devices */ +/* FCIO_RESET_LINK ioctl failed */ +#define L_FCIO_RESET_LINK_FAIL 0x20208 + +/* FCIO_GET_FCODE_REV_FAIL ioctl failed */ +#define L_FCIO_GET_FCODE_REV_FAIL 0x20209 + +/* FCIO_GET_FW_REV_FAIL ioctl failed */ +#define L_FCIO_GET_FW_REV_FAIL 0x20210 + +/* FCIO_GET_DEV_LIST returns invalid dev. counts */ +#define L_INVALID_DEVICE_COUNT 0x20211 + +/* L_FCIO_GET_NUM_DEVS_FAIL ioctl failed */ +#define L_FCIO_GET_NUM_DEVS_FAIL 0x20212 + +/* L_FCIO_GET_DEV_LIST_FAIL ioctl failed */ +#define L_FCIO_GET_DEV_LIST_FAIL 0x20213 + +/* L_FCIO_GET_LINK_STATUS ioctl failed */ +#define L_FCIO_GET_LINK_STATUS_FAIL 0x20214 + +/* L_FCIO_LOOPBACK_INTERNAL or FCIO_CMD/FCIO_LASER_OFF ioctl failed */ +#define L_PORT_OFFLINE_FAIL 0x20215 + +/* Internal Loopback or laser off ioctls not supported */ +#define L_PORT_OFFLINE_UNSUPPORTED 0x20216 + +/* L_FCIO_NO_LOOPBACK or FCIO_CMD/FCIO_LASER_ON ioctl failed */ +#define L_PORT_ONLINE_FAIL 0x20217 + +/* No-Loopback or laser on ioctls not supported */ +#define L_PORT_ONLINE_UNSUPPORTED 0x20218 + +/* L_FCIO_GET_HOST_PARAMS ioctl failed */ +#define L_FCIO_GET_HOST_PARAMS_FAIL 0x20219 + +/* Loopback mode failure */ +#define L_LOOPBACK_FAILED 0x20220 + +/* Loopback unsupported */ +#define L_LOOPBACK_UNSUPPORTED 0x20221 + +/* FCIO_FORCE_LIP ioctl failed on one of the paths, say, of an MPXIO device */ +#define L_FCIO_FORCE_LIP_PARTIAL_FAIL 0x20222 + +/* + * Error definitions + * for Fabric FC driver ioctls + */ +/* FCP_TGT_INQUIRY ioctl failed */ +#define L_FCP_TGT_INQUIRY_FAIL 0x20250 + +/* + * Error definitions + * for 24-bit address handling + */ +/* Private loop address > 0xFF found */ +#define L_INVALID_PRIVATE_LOOP_ADDRESS 0x20401 + +/* Encountered an unexpected fibre channel topology value */ +#define L_UNEXPECTED_FC_TOPOLOGY 0x20402 + +/* Fabric address was not found */ +#define L_NO_FABRIC_ADDR_FOUND 0x20403 + +/* The FCIO_GET_TOPOLOGY ioctl failed */ +#define L_FCIO_GET_TOPOLOGY_FAIL 0x20404 + +/* Invalid fabric or public loop address */ +#define L_INVALID_FABRIC_ADDRESS 0x20405 + +/* Point to Point fibre channel topology not supported */ +#define L_PT_PT_FC_TOP_NOT_SUPPORTED 0x20406 + +/* + * Error definitions for Tapestry SAN support. + */ +/* The FCIO_DEV_LOGIN ioctl failed */ +#define L_FCIO_DEV_LOGIN_FAIL 0x20407 + +/* The FCIO_DEV_LOGOUT ioctl failed */ +#define L_FCIO_DEV_LOGOUT_FAIL 0x20408 + +/* Operation not supported on connected topology */ +#define L_OPNOSUPP_ON_TOPOLOGY 0x20409 + +/* Operation not supported on the path */ +#define L_INVALID_PATH_TYPE 0x20410 + +/* FCIO_GET_STATE ioctl failed */ +#define L_FCIO_GET_STATE_FAIL 0x20411 + +/* input WWN not found in dev list */ +#define L_WWN_NOT_FOUND_IN_DEV_LIST 0x20412 + +/* + * Error definitions for + * g_dev_map_init related routines. + */ +/* input addr invalid */ +#define L_INVALID_MAP_DEV_ADDR 0x20430 + +/* input property invalid */ +#define L_INVALID_MAP_DEV_PROP_NAME 0x20431 + +/* input property invalid */ +#define L_INVALID_MAP_DEV_PROP_TYPE 0x20432 + +/* input property name invalid */ +#define L_INVALID_MAP_DEV_PROP 0x20433 + +/* device not found */ +#define L_NO_SUCH_DEV_FOUND 0x20434 + +/* prop not found */ +#define L_NO_SUCH_PROP_FOUND 0x20435 + +/* invalid arg found */ +#define L_INVALID_ARG 0x20436 + +/* + * Error definitions + * for Downloading IB FW. + */ +/* Invalid download file checksum */ +#define L_DWNLD_CHKSUM_FAILED 0x20301 + +/* Unable to read download exec header */ +#define L_DWNLD_READ_HEADER_FAIL 0x20302 + +/* Number of bytes read from download file is not correct */ +#define L_DWNLD_READ_INCORRECT_BYTES 0x20303 + +/* Wrong text segment size */ +#define L_DWNLD_INVALID_TEXT_SIZE 0x20304 + +/* Error reading the download file */ +#define L_DWNLD_READ_ERROR 0x20305 + +/* Bad firmware magic found in the download file */ +#define L_DWNLD_BAD_FRMWARE 0x20306 + +/* Timeout message for the IB to be available */ +#define L_DWNLD_TIMED_OUT 0x20307 + +/* Error with Rec Diag page 1 */ +#define L_REC_DIAG_PG1 0x20600 + +/* Invalid transfer Length */ +#define L_TRANSFER_LEN 0x20601 + +/* A firmware file must be specified on the command line */ +#define L_REQUIRE_FILE 0x20602 + + +/* + * Error definitions + * for System Errors + */ +#define L_MALLOC_FAILED 0x30000 + +#define L_MEMCPY_FAILED 0x30001 + +/* Cannot get status for the given path */ +#define L_LSTAT_ERROR 0x30020 + +/* Error reading the symbolic link */ +#define L_SYMLINK_ERROR 0x30021 + +/* Could not convert std. time to hrs/min/sec */ +#define L_LOCALTIME_ERROR 0x30022 + +/* select() system call failed to wait for specified time */ +#define L_SELECT_ERROR 0x30023 + +/* uname() system call failed to get the system info. */ +#define L_UNAME_FAILED 0x30024 + +/* Cannot get status for the given path */ +#define L_FSTAT_ERROR 0x30025 + +/* Cannot get status for the given path */ +#define L_STAT_ERROR 0x30026 + +/* di_init() failed to return snapshot of device tree */ +#define L_DEV_SNAPSHOT_FAILED 0x30027 + +/* di_drv_first_node() failed to find a valid driver */ +#define L_PORT_DRIVER_NOT_FOUND 0x30029 + +/* failed to find any device paths */ +#define L_PHYS_PATH_NOT_FOUND 0x30030 + +/* No device identifier found */ +#define L_NO_DEVID 0x30031 + +/* Driver not supported */ +#define L_DRIVER_NOTSUPP 0x30032 + +/* di_prom_init failure */ +#define L_PROM_INIT_FAILED 0x30033 + +/* + * Error definitions + * for individual + * devices. + */ +/* Device busy */ +#define L_DEV_BUSY 0x40000 + +/* Disk reserved */ +#define L_DEVICE_RESERVED 0x40001 + +/* One or more disks in enclosure are reserved */ +#define L_DISKS_RESERVED 0x40002 + +/* Exclusive open to a device failed. May be busy */ +#define L_EXCL_OPEN_FAILED 0x40003 + +/* Empty slot: Device not installed */ +#define L_SLOT_EMPTY 0x40100 + + +/* + * Error definitions + * for Devctl functions. + */ +/* Devctl acquire fails */ +#define L_ACQUIRE_FAIL 0x40200 + + +/* Power off fails. Device may be busy */ +#define L_POWER_OFF_FAIL_BUSY 0x40300 + + +/* + * Error definitions + * specific to Enclosure. + */ +/* Failed to change the enclosure name */ +#define L_ENCL_NAME_CHANGE_FAIL 0x40400 + +/* Duplicate enclosure names found */ +#define L_DUPLICATE_ENCLOSURES 0x40401 + +/* Invalid no. of dsks in SENA enclosure */ +#define L_INVALID_NUM_DISKS_ENCL 0x40402 + +/* Path is not to a SENA ecnlosure. */ +#define L_ENCL_INVALID_PATH 0x40403 + +/* Cannot get the box list */ +#define L_NO_ENCL_LIST_FOUND 0x40404 + + +/* + * Error definitions + * specific to IB. + */ +/* No element returned from the enclosure */ +#define L_IB_NO_ELEM_FOUND 0x40500 + +/* Invalid page code found in Receive Diag. page. */ +#define L_RD_PG_INVLD_CODE 0x40501 + +/* Reading Receive Diag. page failed: small buffer. */ +#define L_RD_PG_MIN_BUFF 0x40502 + +/* Get status failed */ +#define L_GET_STATUS_FAILED 0x40600 + +/* Warning define. */ +#define L_WARNING 0x90000 + +/* + * For i18n + */ +#include <nl_types.h> +extern nl_catd l_catd; +#define L_SET1 1 /* catalog set number */ +#define MSGSTR(Num, Str) catgets(l_catd, L_SET1, Num, Str) + + +#ifdef __cplusplus +} +#endif + +#endif /* _STGCOM_H */ |