diff options
Diffstat (limited to 'usr/src/uts/common/sys/iphada.h')
| -rw-r--r-- | usr/src/uts/common/sys/iphada.h | 144 |
1 files changed, 0 insertions, 144 deletions
diff --git a/usr/src/uts/common/sys/iphada.h b/usr/src/uts/common/sys/iphada.h deleted file mode 100644 index 9d1a6e28e8..0000000000 --- a/usr/src/uts/common/sys/iphada.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License, Version 1.0 only - * (the "License"). You may not use this file except in compliance - * with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ -/* - * Copyright 2002-2003 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#ifndef _SYS_IPHADA_H -#define _SYS_IPHADA_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#ifdef __cplusplus -extern "C" { -#endif - -#define DA_ICV_MAX_LEN 128 /* max ICV length [bytes] */ - -/* - * iphada.h header for IP Hardware Acceleration Data Attributes - * - * This is a contract private interface for use by the Sun - * Hardware Accelerated Ethernet driver ONLY. - */ -typedef struct da_ipsec { - int da_type; /* M_CTL message ident */ - int da_flag; - uint32_t da_icv_len; /* da_icv length in bytes */ - uchar_t da_icv[DA_ICV_MAX_LEN]; /* ICV for AH or ESP+auth */ -} da_ipsec_t; - -#define IPHADA_M_CTL 0xA1D53DE5u - -/* - * IPSec algorithms capabilities (cip_data in dl_capab_ipsec_t) - */ -typedef struct { - t_uscalar_t alg_type; - t_uscalar_t alg_prim; /* algorithm primitive */ - t_uscalar_t alg_thruput; /* approx throughput metric in Mb/s */ - t_uscalar_t alg_flag; /* flags */ - t_uscalar_t alg_minbits; /* minimum key len in bits */ - t_uscalar_t alg_maxbits; /* maximum key len in bits */ - t_uscalar_t alg_incrbits; /* key len increment in bits */ -} dl_capab_ipsec_alg_t; - -/* - * IPSec sub-capability (follows dl_capability_sub_t) - */ -typedef struct { - t_uscalar_t cip_version; /* interface version */ - t_uscalar_t cip_nciphers; /* number ciphers supported */ - dl_capab_ipsec_alg_t cip_data[1]; /* data */ -} dl_capab_ipsec_t; - -/* - * Algorithm types (alg_type field of dl_capab_ipsec_alg_t) - */ -#define DL_CAPAB_IPSEC_ALG_AUTH 0x01 /* authentication alg. */ -#define DL_CAPAB_IPSEC_ALG_ENCR 0x02 /* encryption alg. */ - -/* alg_prim ciphers */ -#define DL_CAPAB_IPSEC_ENCR_DES 0x02 -#define DL_CAPAB_IPSEC_ENCR_3DES 0x03 -#define DL_CAPAB_IPSEC_ENCR_BLOWFISH 0x07 -#define DL_CAPAB_IPSEC_ENCR_NULL 0x0b /* no encryption */ -#define DL_CAPAB_IPSEC_ENCR_AES 0x0c - -/* alg_prim authentications */ -#define DL_CAPAB_IPSEC_AUTH_NONE 0x00 /* no authentication */ -#define DL_CAPAB_IPSEC_AUTH_MD5HMAC 0x02 -#define DL_CAPAB_IPSEC_AUTH_SHA1HMAC 0x03 - -/* alg_flag values */ -#define DL_CAPAB_ALG_ENABLE 0x01 /* enable this algorithm */ - -/* - * For DL_CT_IPSEC_AH and DL_CT_IPSEC_ESP, the optional dl_key data - * that follows the dl_control_req_t or dl_control_ack_t will be the IPsec - * SPI (Security Parameters Index) value and the destination address. - * This is defined as being unique per protocol. - */ - -#define DL_CTL_IPSEC_ADDR_LEN 16 /* IP addr length in bytes */ - -typedef struct dl_ct_ipsec_key { - uint32_t dl_key_spi; /* Security Parameters Index value */ - uchar_t dl_key_dest_addr[DL_CTL_IPSEC_ADDR_LEN]; /* dest IP address */ - uint32_t dl_key_addr_family; /* family of dest IP address */ - /* (AF_INET or AF_INET6) */ -} dl_ct_ipsec_key_t; - -#define DL_CT_IPSEC_MAX_KEY_LEN 512 /* max key length in bytes */ - -/* - * Possible flags for sadb_sa_flags. - */ -#define DL_CT_IPSEC_INBOUND 0x01 /* SA can be used for inbound pkts */ -#define DL_CT_IPSEC_OUTBOUND 0x02 /* SA can be used for outbound pkts */ - -/* - * minimal SADB entry content - * fields are defined as per RFC 2367 and <net/pfkeyv2.h> - * This defines the content and format of the dl_data portion of - * the dl_control_req_t or dl_control_ack_t. - */ -typedef struct dl_ct_ipsec { - uint8_t sadb_sa_auth; /* Authentication algorithm */ - uint8_t sadb_sa_encrypt; /* Encryption algorithm */ - uint32_t sadb_sa_flags; /* SA flags. */ - uint16_t sadb_key_len_a; /* auth key length in bytes */ - uint16_t sadb_key_bits_a; /* auth key length in bits */ - uint16_t sadb_key_data_a[DL_CT_IPSEC_MAX_KEY_LEN]; /* key data */ - uint16_t sadb_key_len_e; /* encr key length in bytes */ - uint16_t sadb_key_bits_e; /* encr key length in bits */ - uint16_t sadb_key_data_e[DL_CT_IPSEC_MAX_KEY_LEN]; /* key data */ -} dl_ct_ipsec_t; - - - -#ifdef __cplusplus -} -#endif - -#endif /* _SYS_IPHADA_H */ |