path: root/usr/src/uts/common/io/skd/skd_s1120.h

/*
 * This file and its contents are supplied under the terms of the
 * Common Development and Distribution License ("CDDL"), version 1.0.
 * You may only use this file in accordance with the terms of version
 * 1.0 of the CDDL.
 *
 * A full copy of the text of the CDDL should have accompanied this
 * source.  A copy of the CDDL is also available via the Internet at
 * http://www.illumos.org/license/CDDL.
 */

/*
 * Copyright 2013 STEC, Inc.  All rights reserved.
 */

#ifndef _SKD_S1120_H
#define	_SKD_S1120_H

/*
 * Q-channel, 64-bit r/w
 */
#define	FIT_Q_COMMAND			0x400u
#define	FIT_QCMD_QID_MASK		(0x3 << 1)
#define	FIT_QCMD_QID0			(0x0 << 1)
#define	FIT_QCMD_QID_NORMAL		FIT_QCMD_QID0
#ifndef SKD_OMIT_FROM_SRC_DIST
#define	FIT_QCMD_QID1			(0x1 << 1)
#define	FIT_QCMD_QID2			(0x2 << 1)
#define	FIT_QCMD_QID3			(0x3 << 1)
#endif /* SKD_OMIT_FROM_SRC_DIST */
#define	FIT_QCMD_FLUSH_QUEUE		(0ull)	   /* add QID */
#define	FIT_QCMD_MSGSIZE_MASK		(0x3 << 4)
#define	FIT_QCMD_MSGSIZE_64		(0x0 << 4)
#define	FIT_QCMD_MSGSIZE_128		(0x1 << 4)
#define	FIT_QCMD_MSGSIZE_256		(0x2 << 4)
#define	FIT_QCMD_MSGSIZE_512		(0x3 << 4)
#define	FIT_QCMD_BASE_ADDRESS_MASK	(0xFFFFFFFFFFFFFFC0ull)


/*
 * Control, 32-bit r/w
 */
#define	FIT_CONTROL		    0x500u
#ifndef SKD_OMIT_FROM_SRC_DIST
#define	FIT_CR_HARD_RESET		(1u << 0u)
#endif /* SKD_OMIT_FROM_SRC_DIST */
#define	FIT_CR_SOFT_RESET		(1u << 1u)
#ifndef SKD_OMIT_FROM_SRC_DIST
#define	 FIT_CR_DIS_TIMESTAMPS		(1u << 6u)
#endif /* SKD_OMIT_FROM_SRC_DIST */
#define	FIT_CR_ENABLE_INTERRUPTS	(1u << 7u)

/*
 * Status, 32-bit, r/o
 */
#define	FIT_STATUS			0x510u
#define	FIT_SR_DRIVE_STATE_MASK		0x000000FFu
#ifndef SKD_OMIT_FROM_SRC_DIST
#define	FIT_SR_SIGNATURE		(0xFF << 8)
#define	FIT_SR_PIO_DMA			(1 << 16)
#endif /* SKD_OMIT_FROM_SRC_DIST */
#define	FIT_SR_DRIVE_OFFLINE		0x00
#define	FIT_SR_DRIVE_INIT		0x01
/* #define	FIT_SR_DRIVE_READY		0x02 */
#define	FIT_SR_DRIVE_ONLINE		0x03
#define	FIT_SR_DRIVE_BUSY		0x04
#define	FIT_SR_DRIVE_FAULT		0x05
#define	FIT_SR_DRIVE_DEGRADED		0x06
#define	FIT_SR_PCIE_LINK_DOWN		0x07
#define	FIT_SR_DRIVE_SOFT_RESET		0x08
#define	FIT_SR_DRIVE_INIT_FAULT		0x09
#define	FIT_SR_DRIVE_BUSY_SANITIZE	0x0A
#define	FIT_SR_DRIVE_BUSY_ERASE		0x0B
#define	FIT_SR_DRIVE_FW_BOOTING		0x0C
#define	FIT_SR_DRIVE_NEED_FW_DOWNLOAD	0xFE
#define	FIT_SR_DEVICE_MISSING		0xFF
#define	FIT_SR__RESERVED		0xFFFFFF00u

#ifndef SKD_OMIT_FROM_SRC_DIST
/*
 * FIT_STATUS - Status register data definition
 */
#define	FIT_SR_STATE_MASK		(0xFF << 0)
#define	FIT_SR_SIGNATURE		(0xFF << 8)
#define	FIT_SR_PIO_DMA			(1 << 16)
#endif /* SKD_OMIT_FROM_SRC_DIST */


/*
 * Interrupt status, 32-bit r/w1c (w1c ==> write 1 to clear)
 */
#define	FIT_INT_STATUS_HOST	    0x520u
#define	FIT_ISH_FW_STATE_CHANGE		(1u << 0u)
#define	FIT_ISH_COMPLETION_POSTED	(1u << 1u)
#define	FIT_ISH_MSG_FROM_DEV		(1u << 2u)
#define	FIT_ISH_UNDEFINED_3		(1u << 3u)
#define	FIT_ISH_UNDEFINED_4		(1u << 4u)
#define	FIT_ISH_Q0_FULL			(1u << 5u)
#define	FIT_ISH_Q1_FULL			(1u << 6u)
#define	FIT_ISH_Q2_FULL			(1u << 7u)
#define	FIT_ISH_Q3_FULL			(1u << 8u)
#define	FIT_ISH_QCMD_FIFO_OVERRUN	(1u << 9u)
#define	FIT_ISH_BAD_EXP_ROM_READ	(1u << 10u)


#define	FIT_INT_DEF_MASK			\
	(FIT_ISH_FW_STATE_CHANGE |		\
	    FIT_ISH_COMPLETION_POSTED |		\
	    FIT_ISH_MSG_FROM_DEV |		\
	    FIT_ISH_Q0_FULL |			\
	    FIT_ISH_Q1_FULL |			\
	    FIT_ISH_Q2_FULL |			\
	    FIT_ISH_Q3_FULL |			\
	    FIT_ISH_QCMD_FIFO_OVERRUN |		\
	    FIT_ISH_BAD_EXP_ROM_READ)

#define	FIT_INT_QUEUE_FULL			\
	(FIT_ISH_Q0_FULL |			\
	    FIT_ISH_Q1_FULL |			\
	    FIT_ISH_Q2_FULL |			\
	    FIT_ISH_Q3_FULL)


#define	MSI_MSG_NWL_ERROR_0		0x00000000
#define	MSI_MSG_NWL_ERROR_1		0x00000001
#define	MSI_MSG_NWL_ERROR_2		0x00000002
#define	MSI_MSG_NWL_ERROR_3		0x00000003
#define	MSI_MSG_STATE_CHANGE		0x00000004
#define	MSI_MSG_COMPLETION_POSTED	0x00000005
#define	MSI_MSG_MSG_FROM_DEV		0x00000006
#define	MSI_MSG_RESERVED_0		0x00000007
#define	MSI_MSG_RESERVED_1		0x00000008
#define	MSI_MSG_QUEUE_0_FULL		0x00000009
#define	MSI_MSG_QUEUE_1_FULL		0x0000000A
#define	MSI_MSG_QUEUE_2_FULL		0x0000000B
#define	MSI_MSG_QUEUE_3_FULL		0x0000000C



#define	FIT_INT_RESERVED_MASK			\
	(FIT_ISH_UNDEFINED_3 |			\
	    FIT_ISH_UNDEFINED_4)
/*
 * Interrupt mask, 32-bit r/w
 * Bit definitions are the same as FIT_INT_STATUS_HOST
 */
#define	FIT_INT_MASK_HOST	    0x528u


/*
 * Message to device, 32-bit r/w
 */
#define	FIT_MSG_TO_DEVICE	    0x540u

/*
 * Message from device, 32-bit, r/o
 */
#define	FIT_MSG_FROM_DEVICE	    0x548u


/*
 * 32-bit messages to/from device, composition/extraction macros
 */
#define	FIT_MXD_CONS(TYPE, PARAM, DATA) \
	((((TYPE)	& 0xFFu) << 24u) | \
	    (((PARAM) & 0xFFu) << 16u) | \
	    (((DATA)	& 0xFFFFu) << 0u))
#define	FIT_MXD_TYPE(MXD)		(((MXD) >> 24u) & 0xFFu)
#define	FIT_MXD_PARAM(MXD)		(((MXD) >> 16u) & 0xFFu)
#define	FIT_MXD_DATA(MXD)		(((MXD) >> 0u) & 0xFFFFu)


/*
 * Types of messages to/from device
 */
#define	FIT_MTD_FITFW_INIT		0x01u
#define	FIT_MTD_GET_CMDQ_DEPTH		0x02u
#define	FIT_MTD_SET_COMPQ_DEPTH		0x03u
#define	FIT_MTD_SET_COMPQ_ADDR		0x04u
#define	FIT_MTD_ARM_QUEUE		0x05u
#define	FIT_MTD_CMD_LOG_HOST_ID		0x07u
#define	FIT_MTD_CMD_LOG_TIME_STAMP_LO	0x08u
#define	FIT_MTD_CMD_LOG_TIME_STAMP_HI	0x09u
#define	FIT_MFD_SMART_EXCEEDED		0x10u
#define	FIT_MFD_POWER_DOWN		0x11u
#define	FIT_MFD_OFFLINE			0x12u
#define	FIT_MFD_ONLINE			0x13u
#define	FIT_MFD_FW_RESTARTING		0x14u
#define	FIT_MFD_PM_ACTIVE		0x15u
#define	FIT_MFD_PM_STANDBY		0x16u
#define	FIT_MFD_PM_SLEEP		0x17u
#define	FIT_MFD_CMD_PROGRESS		0x18u

#ifndef SKD_OMIT_FROM_SRC_DIST
#define	FIT_MTD_DEBUG			0xFEu
#define	FIT_MFD_DEBUG			0xFFu
#endif /* SKD_OMIT_FROM_SRC_DIST */

#define	FIT_MFD_MASK			(0xFFu)
#define	FIT_MFD_DATA_MASK		(0xFFu)
#define	FIT_MFD_MSG(x)			(((x) >> 24) & FIT_MFD_MASK)
#define	FIT_MFD_DATA(x)			((x) & FIT_MFD_MASK)


/*
 * Extra arg to FIT_MSG_TO_DEVICE, 64-bit r/w
 * Used to set completion queue address (FIT_MTD_SET_COMPQ_ADDR)
 * (was Response buffer in docs)
 */
#define	FIT_MSG_TO_DEVICE_ARG	    0x580u

/*
 * Hardware (ASIC) version, 32-bit r/o
 */
#define	FIT_HW_VERSION		    0x588u

/*
 * Scatter/gather list descriptor.
 * 32-bytes and must be aligned on a 32-byte boundary.
 * All fields are in little endian order.
 */
struct fit_sg_descriptor {
	uint32_t control;
	uint32_t byte_count;
	uint64_t host_side_addr;
	uint64_t dev_side_addr;
	uint64_t next_desc_ptr;
};

#define	FIT_SGD_CONTROL_NOT_LAST    0x000u
#define	FIT_SGD_CONTROL_LAST	    0x40Eu

/*
 * Header at the beginning of a FIT message. The header
 * is followed by SSDI requests each 64 bytes.
 * A FIT message can be up to 512 bytes long and must start
 * on a 64-byte boundary.
 */
struct fit_msg_hdr {
	uint8_t protocol_id;
	uint8_t num_protocol_cmds_coalesced;
	uint8_t _reserved1[6];
	uint64_t _reserved2[7];	/* Forces alignment. */
};

#define	FIT_PROTOCOL_ID_FIT	1
#define	FIT_PROTOCOL_ID_SSDI	2
#define	FIT_PROTOCOL_ID_SOFIT	3


#define	FIT_PROTOCOL_MINOR_VER(mtd_val) ((mtd_val >> 16) & 0xF)
#define	FIT_PROTOCOL_MAJOR_VER(mtd_val) ((mtd_val >> 20) & 0xF)

#ifndef SKD_OMIT_FROM_SRC_DIST
/*
 * Format of a completion entry. The completion queue is circular
 * and must have at least as many entries as the maximum number
 * of commands that may be issued to the device.
 *
 * There are no head/tail pointers. The cycle value is used to
 * infer the presence of new completion records.
 * Initially the cycle in all entries is 0, the index is 0, and
 * the cycle value to expect is 1. When completions are added
 * their cycle values are set to 1. When the index wraps the
 * cycle value to expect is incremented.
 *
 * Command_context is opaque and taken verbatim from the SSDI command.
 * All other fields are big endian.
 */
#endif /* SKD_OMIT_FROM_SRC_DIST */
#define	FIT_PROTOCOL_VERSION_0	0

/*
 *  Protocol major version 1 completion entry.
 *  The major protocol version is found in bits
 *  20-23 of the FIT_MTD_FITFW_INIT response.
 */
struct fit_completion_entry_v1
{
	uint32_t		    num_returned_bytes;
	uint16_t		    tag;
	uint8_t			    status;  /* SCSI status */
	uint8_t			    cycle;
};

#define	FIT_PROTOCOL_VERSION_1		1
#define	FIT_PROTOCOL_VERSION_CURRENT	FIT_PROTOCOL_VERSION_1

struct fit_comp_error_info {
	uint8_t type : 7; /* 00: Bits0-6 indicates the type of sense data. */
	uint8_t valid : 1; /* 00: Bit 7 := 1 ==> info field is valid. */
	uint8_t reserved0; /* 01: Obsolete field */
	uint8_t key : 4; /* 02: Bits0-3 indicate the sense key. */
	uint8_t reserved2 : 1; /* 02: Reserved bit. */
	uint8_t bad_length : 1; /* 02: Incorrect Length Indicator */
	uint8_t end_medium : 1; /* 02: End of Medium */
	uint8_t file_mark : 1; /* 02: Filemark */
	uint8_t info[4]; /* 03: */
	uint8_t reserved1; /* 07: Additional Sense Length */
	uint8_t cmd_spec[4]; /* 08: Command Specific Information */
	uint8_t code; /* 0C: Additional Sense Code */
	uint8_t qual; /* 0D: Additional Sense Code Qualifier */
	uint8_t fruc; /* 0E: Field Replaceable Unit Code */
	uint8_t sks_high : 7; /* 0F: Sense Key Specific (MSB) */
	uint8_t sks_valid : 1; /* 0F: Sense Key Specific Valid */
	uint16_t sks_low; /* 10: Sense Key Specific (LSW) */
	uint16_t reserved3; /* 12: Part of additional sense bytes (unused) */
	uint16_t uec; /* 14: Additional Sense Bytes */
	uint64_t per; /* 16: Additional Sense Bytes */
	uint8_t reserved4[2]; /* 1E: Additional Sense Bytes (unused) */
};


/* Task management constants */
#define	SOFT_TASK_SIMPLE	    0x00
#define	SOFT_TASK_HEAD_OF_QUEUE	    0x01
#define	SOFT_TASK_ORDERED	    0x02


/*
 * Version zero has the last 32 bits reserved,
 * Version one has the last 32 bits sg_list_len_bytes;
 */
struct skd_command_header
{
	uint64_t	sg_list_dma_address;
	uint16_t	tag;
	uint8_t		attribute;
	uint8_t		add_cdb_len;	/* In 32 bit words */
	uint32_t	sg_list_len_bytes;
};

struct skd_scsi_request
{
	struct skd_command_header hdr;
	unsigned char cdb[16];
};

struct driver_inquiry_data {
	uint8_t peripheralDeviceType : 5;
	uint8_t qualifier : 3;
	uint8_t pageCode;
	uint16_t pageLength;
	uint16_t pcieBusNumber;
	uint8_t pcieDeviceNumber;
	uint8_t pcieFunctionNumber;
	uint8_t pcieLinkSpeed;
	uint8_t pcieLinkLanes;
	uint16_t pcieVendorId;
	uint16_t pcieDeviceId;
	uint16_t pcieSubsystemVendorId;
	uint16_t pcieSubsystemDeviceId;
	uint8_t reserved1[2];
	uint8_t reserved2[3];
	uint8_t driverVersionLength;
	uint8_t driverVersion[0x14];
};

#endif /* _SKD_S1120_H */