import wcalc-0.9

Wcalc is a transmission line analysis and synthesis tool.  Several
structures including air core solenoid inductors, coaxial cable,
single and coupled microstrip, stripline, and metal-insulator-
semiconductor microstrip are included.

Wcalc can analyze the electrical parameters for a given physical
description of the structure or synthesize the required dimensions
to meet certain desired electrical characteristics.

Wcalc provides several different frontends for accessing the numeric
engine.  Currently, there is a GTK based standalone graphical
user interface, a common gateway interface (CGI) for web access,
Scilab, Octave, and Matlab interfaces for maximum flexibility within
a scientific programming environment, and a standard input/output
(stdio) interface which allows a simple interface to other 3rd
party tools which can communicate via a pipe.

The different frontends are installed as different packages for
flexibility in deployment.

5 files changed, 120 insertions, 0 deletions

diff --git a/cad/wcalc/DESCR b/cad/wcalc/DESCR
new file mode 100644
index 00000000000..557f30ac861
--- /dev/null
+++ b/cad/wcalc/DESCR
@@ -0,0 +1,19 @@
+Wcalc is a transmission line analysis and synthesis tool.  Several
+structures including air core solenoid inductors, coaxial cable,
+single and coupled microstrip, stripline, and metal-insulator-
+semiconductor microstrip are included.
+
+Wcalc can analyze the electrical parameters for a given physical
+description of the structure or synthesize the required dimensions
+to meet certain desired electrical characteristics.
+
+Wcalc provides several different frontends for accessing the numeric
+engine.  Currently, there is a GTK based standalone graphical
+user interface, a common gateway interface (CGI) for web access,
+Scilab, Octave, and Matlab interfaces for maximum flexibility within
+a scientific programming environment, and a standard input/output
+(stdio) interface which allows a simple interface to other 3rd
+party tools which can communicate via a pipe.
+
+The different frontends are installed as different packages for
+flexibility in deployment.
diff --git a/cad/wcalc/Makefile b/cad/wcalc/Makefile
new file mode 100644
index 00000000000..e37db4cbbae
--- /dev/null
+++ b/cad/wcalc/Makefile
@@ -0,0 +1,44 @@
+# $NetBSD: Makefile,v 1.1.1.1 2005/11/01 03:54:45 dmcmahill Exp $
+#
+
+.include "../../cad/wcalc/Makefile.common"
+
+COMMENT=	Meta-pkg for the Wcalc Transmission Line Analysis/Synthesis Calculator
+
+VER=	${DISTNAME:S/wcalc-//}
+
+DEPENDS+=	libwcalc-${VER}*:../../cad/libwcalc
+DEPENDS+=	cgi-wcalc-${VER}*:../../cad/cgi-wcalc
+DEPENDS+=	sci-wcalc-${VER}*:../../cad/sci-wcalc
+DEPENDS+=	stdio-wcalc-${VER}*:../../cad/stdio-wcalc
+DEPENDS+=	wcalc-docs-${VER}*:../../cad/wcalc-docs
+
+PKG_OPTIONS_VAR=		PKG_OPTIONS.wcalc
+PKG_SUPPORTED_OPTIONS=		mex wcalc-gtk1
+
+.include "../../mk/bsd.prefs.mk"
+.include "../../mk/bsd.options.mk"
+
+.if !empty(PKG_OPTIONS:Mmex-gtk1)
+DEPENDS+=	gtk1-wcalc-${VER}*:../../cad/gtk1-wcalc
+.else
+DEPENDS+=	gtk2-wcalc-${VER}*:../../cad/gtk2-wcalc
+.endif
+
+.if !empty(PKG_OPTIONS:Mmex)
+# mex-wcalc needs a matlab installation.  In addition, mex-wcalc
+# will not currently build correctly if you are using a
+# non-native matlab (i.e. linux or solaris matlab on NetBSD)
+ONLY_FOR_PLATFORM=	Linux-*-i386 SunOS-*-sparc*
+DEPENDS+=	mex-wcalc-${VER}*:../../cad/mex-wcalc
+.endif
+
+EXTRACT_ONLY=	# defined
+NO_CHECKSUM=	# defined
+NO_CONFIGURE=	# defined
+NO_BUILD=	# defined
+NO_MTREE=	# defined
+
+do-install:	# empty
+
+.include "../../mk/bsd.pkg.mk"
diff --git a/cad/wcalc/Makefile.common b/cad/wcalc/Makefile.common
new file mode 100644
index 00000000000..42ce8ebe84c
--- /dev/null
+++ b/cad/wcalc/Makefile.common
@@ -0,0 +1,51 @@
+# $NetBSD: Makefile.common,v 1.1.1.1 2005/11/01 03:54:44 dmcmahill Exp $
+#
+
+DISTNAME=       wcalc-0.9
+CATEGORIES=     cad
+MASTER_SITES=   ${MASTER_SITE_SOURCEFORGE:=wcalc/}
+
+MAINTAINER=     dmcmahill@NetBSD.org
+HOMEPAGE=       http://wcalc.sourceforge.net/
+
+DISTINFO_FILE=	${.CURDIR}/../../cad/wcalc/distinfo
+
+GNU_CONFIGURE=  YES
+USE_LIBTOOL=	YES
+
+# uses vpath and a GNU make pattern rule
+USE_TOOLS+=	gmake pkg-config
+
+# subdirectory used by wcalc for headers, libexec stuff, etc.
+WCALC_DIR=	${DISTNAME}
+
+# where the HTML pages reside:
+WCALC_HTMLDIR?=		share/${WCALC_DIR}/htdocs
+
+# URI for the static HTML content
+WCALC_HTMLPATH?=	/wcalc/
+
+# where the CGI programs reside
+WCALC_CGIDIR?=		libexec/cgi-bin
+
+# URI for the CGI programs
+WCALC_CGIPATH?=		/cgi-wcalc/
+
+# setup the directories and URI path
+CONFIGURE_ARGS+=	--with-htmldir=${PREFIX}/${WCALC_HTMLDIR}
+CONFIGURE_ARGS+=	--with-htmlpath=${WCALC_HTMLPATH}
+CONFIGURE_ARGS+=	--with-cgibin=${PREFIX}/${WCALC_CGIDIR}
+CONFIGURE_ARGS+=	--with-cgipath=${WCALC_CGIPATH}
+
+# make sure we can refer to these paths in the MESSAGE
+MESSAGE_SUBST+=	WCALC_CGIDIR=${WCALC_CGIDIR}
+MESSAGE_SUBST+=	WCALC_CGIPATH=${WCALC_CGIPATH}
+MESSAGE_SUBST+=	WCALC_HTMLDIR=${WCALC_HTMLDIR}
+MESSAGE_SUBST+=	WCALC_HTMLPATH=${WCALC_HTMLPATH}
+MESSAGE_SUBST+=	WCALC_DIR=${WCALC_DIR}
+
+# and the PLIST too
+PLIST_SUBST+=	WCALC_CGIDIR=${WCALC_CGIDIR}
+PLIST_SUBST+=	WCALC_HTMLDIR=${WCALC_HTMLDIR}
+PLIST_SUBST+=	WCALC_DIR=${WCALC_DIR}
+
diff --git a/cad/wcalc/PLIST b/cad/wcalc/PLIST
new file mode 100644
index 00000000000..eee1b55adee
--- /dev/null
+++ b/cad/wcalc/PLIST
@@ -0,0 +1 @@
+@comment $NetBSD: PLIST,v 1.1.1.1 2005/11/01 03:54:45 dmcmahill Exp $
diff --git a/cad/wcalc/distinfo b/cad/wcalc/distinfo
new file mode 100644
index 00000000000..96e7cdd73da
--- /dev/null
+++ b/cad/wcalc/distinfo
@@ -0,0 +1,5 @@
+$NetBSD: distinfo,v 1.1.1.1 2005/11/01 03:54:45 dmcmahill Exp $
+
+SHA1 (wcalc-0.9.tar.gz) = d59d03a8b1e1eceaae032ab755f0ee9ca30d0b95
+RMD160 (wcalc-0.9.tar.gz) = cccbbac6f4eca55a2a695d73da62cc4535e47edf
+Size (wcalc-0.9.tar.gz) = 1341805 bytes