Add a script to generate the bmake.1 man page for the bootstrap script,

and keep a copy of the bmake.1 man page in devel/bmake/files.

2 files changed, 1628 insertions, 0 deletions

diff --git a/devel/bmake/bmake2pkgsrc b/devel/bmake/bmake2pkgsrc
new file mode 100755
index 00000000000..e9fd9e31c07
--- /dev/null
+++ b/devel/bmake/bmake2pkgsrc
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# $NetBSD: bmake2pkgsrc,v 1.1 2006/07/14 15:58:08 jlam Exp $
+#
+# This script should be run after the import-bmake-sh script is run to
+# generate the bmake.1 manpage for the bootstrap script.
+#
+# Run this from the devel/bmake package directory:
+#
+#	cd devel/bmake && ./bmake2pkgsrc
+#
+
+cd files
+( sed -e '/^.Nm/s/make/bmake/' -e '/^.Sh HISTORY/,$d' make.1
+  echo ".Sh HISTORY"
+  echo ".Nm"
+  echo "is derived from NetBSD's"
+  echo ".Xr make 1 ."
+  echo "It uses autoconf to facilitate portability to other platforms."
+) > bmake.1
diff --git a/devel/bmake/files/bmake.1 b/devel/bmake/files/bmake.1
new file mode 100644
index 00000000000..e7126991236
--- /dev/null
+++ b/devel/bmake/files/bmake.1
@@ -0,0 +1,1608 @@
+.\"	$NetBSD: bmake.1,v 1.1 2006/07/14 15:58:08 jlam Exp $
+.\"
+.\" Copyright (c) 1990, 1993
+.\"	The Regents of the University of California.  All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. Neither the name of the University nor the names of its contributors
+.\"    may be used to endorse or promote products derived from this software
+.\"    without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\"	from: @(#)make.1	8.4 (Berkeley) 3/19/94
+.\"
+.Dd June 27, 2005
+.Dt MAKE 1
+.Os
+.Sh NAME
+.Nm bmake
+.Nd maintain program dependencies
+.Sh SYNOPSIS
+.Nm
+.Op Fl BeikNnqrstWX
+.Bk -words
+.Op Fl D Ar variable
+.Ek
+.Bk -words
+.Op Fl d Ar flags
+.Ek
+.Bk -words
+.Op Fl f Ar makefile
+.Ek
+.Bk -words
+.Op Fl I Ar directory
+.Ek
+.Bk -words
+.Op Fl J Ar private
+.Ek
+.Bk -words
+.Op Fl j Ar max_jobs
+.Ek
+.Bk -words
+.Op Fl m Ar directory
+.Ek
+.Bk -words
+.Op Fl T Ar file
+.Ek
+.Bk -words
+.Op Fl V Ar variable
+.Ek
+.Op Ar variable=value
+.Bk -words
+.Op Ar target ...
+.Ek
+.Sh DESCRIPTION
+.Nm
+is a program designed to simplify the maintenance of other programs.
+Its input is a list of specifications as to the files upon which programs
+and other files depend.
+If the file
+.Ql Pa makefile
+exists, it is read for this list of specifications.
+If it does not exist, the file
+.Ql Pa Makefile
+is read.
+If the file
+.Ql Pa .depend
+exists, it is read (see
+.Xr mkdep 1 ) .
+.Pp
+This manual page is intended as a reference document only.
+For a more thorough description of
+.Nm
+and makefiles, please refer to
+.%T "Make \- A Tutorial" .
+.Pp
+The options are as follows:
+.Bl -tag -width Ds
+.It Fl B
+Try to be backwards compatible by executing a single shell per command and
+by executing the commands to make the sources of a dependency line in sequence.
+.It Fl D Ar variable
+Define
+.Ar variable
+to be 1, in the global context.
+.It Fl d Ar flags
+Turn on debugging, and specify which portions of
+.Nm
+are to print debugging information.
+.Ar Flags
+is one or more of the following:
+.Bl -tag -width Ds
+.It Ar A
+Print all possible debugging information;
+equivalent to specifying all of the debugging flags.
+.It Ar a
+Print debugging information about archive searching and caching.
+.It Ar c
+Print debugging information about conditional evaluation.
+.It Ar d
+Print debugging information about directory searching and caching.
+.It Ar e
+Print debugging information about failed commands and targets.
+.It Ar f
+Print debugging information about loop evaluation.
+.It Ar "g1"
+Print the input graph before making anything.
+.It Ar "g2"
+Print the input graph after making everything, or before exiting
+on error.
+.It Ar "g3"
+Print the input graph before exiting on error.
+.It Ar j
+Print debugging information about running multiple shells.
+.It Ar m
+Print debugging information about making targets, including modification
+dates.
+.It Ar n
+Don't delete the temporary command scripts created in
+.Pa /tmp
+when running commands.
+These are created via
+.Xr mkstemp 3
+and have names of the form
+.Pa /tmp/makeXXXXX .
+.Em NOTE:
+This can create many file in /tmp so use with care.
+.It Ar s
+Print debugging information about suffix-transformation rules.
+.It Ar t
+Print debugging information about target list maintenance.
+.It Ar v
+Print debugging information about variable assignment.
+.It Ar x
+Run shell commands with
+.Fl x
+so the actual commands are printed as they are executed.
+.El
+.It Fl e
+Specify that environment variables override macro assignments within
+makefiles.
+.It Fl f Ar makefile
+Specify a makefile to read instead of the default
+.Ql Pa makefile .
+If
+.Ar makefile
+is
+.Ql Fl ,
+standard input is read.
+Multiple makefiles may be specified, and are read in the order specified.
+.It Fl I Ar directory
+Specify a directory in which to search for makefiles and included makefiles.
+The system makefile directory (or directories, see the
+.Fl m
+option) is automatically included as part of this list.
+.It Fl i
+Ignore non-zero exit of shell commands in the makefile.
+Equivalent to specifying
+.Ql Fl
+before each command line in the makefile.
+.It Fl J Ar private
+This option should
+.Em not
+be specified by the user.
+.Pp
+When the
+.Ar j
+option is in use in a recursive build, this option is passed by a make
+to child makes to allow all the make processes in the build to
+cooperate to avoid overloading the system.
+.It Fl j Ar max_jobs
+Specify the maximum number of jobs that
+.Nm
+may have running at any one time.
+Turns compatibility mode off, unless the
+.Ar B
+flag is also specified.
+.It Fl k
+Continue processing after errors are encountered, but only on those targets
+that do not depend on the target whose creation caused the error.
+.It Fl m Ar directory
+Specify a directory in which to search for sys.mk and makefiles included
+via the
+.Ao Ar file Ac Ns -style
+include statement.
+The
+.Fl m
+option can be used multiple times to form a search path.
+This path will override the default system include path: /usr/share/mk.
+Furthermore the system include path will be appended to the search path used
+for
+.Qo Ar file Qc Ns -style
+include statements (see the
+.Fl I
+option).
+.Pp
+If a file or directory name in the
+.Fl m
+argument (or the
+.Ev MAKESYSPATH
+environment variable) starts with the string
+.Qq \&.../
+then
+.Nm
+will search for the specified file or directory named in the remaining part
+of the argument string.
+The search starts with the current directory of
+the Makefile and then works upward towards the root of the filesystem.
+If the search is successful, then the resulting directory replaces the
+.Qq \&.../
+specification in the
+.Fl m
+argument.
+If used, this feature allows
+.Nm
+to easily search in the current source tree for customized sys.mk files
+(e.g., by using
+.Qq \&.../mk/sys.mk
+as an argument).
+.It Fl n
+Display the commands that would have been executed, but do not
+actually execute them unless the target depends on the .MAKE special
+source (see below).
+.It Fl N
+Display the commands which would have been executed, but do not
+actually execute any of them; useful for debugging top-level makefiles
+without descending into subdirectories.
+.It Fl q
+Do not execute any commands, but exit 0 if the specified targets are
+up-to-date and 1, otherwise.
+.It Fl r
+Do not use the built-in rules specified in the system makefile.
+.It Fl s
+Do not echo any commands as they are executed.
+Equivalent to specifying
+.Ql Ic @
+before each command line in the makefile.
+.It Fl T Ar tracefile
+When used with the
+.Fl j
+flag,
+append a trace record to
+.Ar tracefile
+for each job started and completed.
+.It Fl t
+Rather than re-building a target as specified in the makefile, create it
+or update its modification time to make it appear up-to-date.
+.It Fl V Ar variable
+Print
+.Nm Ns 's
+idea of the value of
+.Ar variable ,
+in the global context.
+Do not build any targets.
+Multiple instances of this option may be specified;
+the variables will be printed one per line,
+with a blank line for each null or undefined variable.
+If
+.Ar variable
+contains a
+.Ql \&$
+then the value will be expanded before printing.
+.It Fl W
+Treat any warnings during makefile parsing as errors.
+.It Fl X
+Don't export variables passed on the command line to the environment
+individually.
+Variables passed on the command line are still exported
+via the
+.Va MAKEFLAGS
+environment variable.
+This option may be useful on systems which have a small limit on the
+size of command arguments.
+.It Ar variable=value
+Set the value of the variable
+.Ar variable
+to
+.Ar value .
+Normally, all values passed on the command line are also exported to
+sub-makes in the environment.
+The
+.Fl X
+flag disables this behavior.
+Variable assignments should follow options for POSIX compatibility
+but no ordering is enforced.
+.El
+.Pp
+There are seven different types of lines in a makefile: file dependency
+specifications, shell commands, variable assignments, include statements,
+conditional directives, for loops, and comments.
+.Pp
+In general, lines may be continued from one line to the next by ending
+them with a backslash
+.Pq Ql \e .
+The trailing newline character and initial whitespace on the following
+line are compressed into a single space.
+.Sh FILE DEPENDENCY SPECIFICATIONS
+Dependency lines consist of one or more targets, an operator, and zero
+or more sources.
+This creates a relationship where the targets ``depend'' on the sources
+and are usually created from them.
+The exact relationship between the target and the source is determined
+by the operator that separates them.
+The three operators are as follows:
+.Bl -tag -width flag
+.It Ic \&:
+A target is considered out-of-date if its modification time is less than
+those of any of its sources.
+Sources for a target accumulate over dependency lines when this operator
+is used.
+The target is removed if
+.Nm
+is interrupted.
+.It Ic \&!
+Targets are always re-created, but not until all sources have been
+examined and re-created as necessary.
+Sources for a target accumulate over dependency lines when this operator
+is used.
+The target is removed if
+.Nm
+is interrupted.
+.It Ic \&::
+If no sources are specified, the target is always re-created.
+Otherwise, a target is considered out-of-date if any of its sources has
+been modified more recently than the target.
+Sources for a target do not accumulate over dependency lines when this
+operator is used.
+The target will not be removed if
+.Nm
+is interrupted.
+.El
+.Pp
+Targets and sources may contain the shell wildcard values
+.Ql \&? ,
+.Ql * ,
+.Ql [] ,
+and
+.Ql {} .
+The values
+.Ql \&? ,
+.Ql * ,
+and
+.Ql []
+may only be used as part of the final
+component of the target or source, and must be used to describe existing
+files.
+The value
+.Ql {}
+need not necessarily be used to describe existing files.
+Expansion is in directory order, not alphabetically as done in the shell.
+.Sh SHELL COMMANDS
+Each target may have associated with it a series of shell commands, normally
+used to create the target.
+Each of the commands in this script
+.Em must
+be preceded by a tab.
+While any target may appear on a dependency line, only one of these
+dependencies may be followed by a creation script, unless the
+.Ql Ic \&::
+operator is used.
+.Pp
+If the first characters of the command line are any combination of
+.Ql Ic @ ,
+.Ql Ic + ,
+or
+.Ql Ic \- ,
+the command is treated specially.
+A
+.Ql Ic @
+causes the command not to be echoed before it is executed.
+A
+.Ql Ic +
+causes the command to be executed even when
+.Fl n
+is given.
+This is similar to the effect of the .MAKE special source,
+except that the effect can be limited to a single line of a script.
+A
+.Ql Ic \-
+causes any non-zero exit status of the command line to be ignored.
+.Sh VARIABLE ASSIGNMENTS
+Variables in make are much like variables in the shell, and, by tradition,
+consist of all upper-case letters.
+.Ss Variable assignment modifiers
+The five operators that can be used to assign values to variables are as
+follows:
+.Bl -tag -width Ds
+.It Ic \&=
+Assign the value to the variable.
+Any previous value is overridden.
+.It Ic \&+=
+Append the value to the current value of the variable.
+.It Ic \&?=
+Assign the value to the variable if it is not already defined.
+.It Ic \&:=
+Assign with expansion, i.e. expand the value before assigning it
+to the variable.
+Normally, expansion is not done until the variable is referenced.
+.It Ic \&!=
+Expand the value and pass it to the shell for execution and assign
+the result to the variable.
+Any newlines in the result are replaced with spaces.
+.El
+.Pp
+Any white-space before the assigned
+.Ar value
+is removed; if the value is being appended, a single space is inserted
+between the previous contents of the variable and the appended value.
+.Pp
+Variables are expanded by surrounding the variable name with either
+curly braces
+.Pq Ql {}
+or parentheses
+.Pq Ql ()
+and preceding it with
+a dollar sign
+.Pq Ql \&$ .
+If the variable name contains only a single letter, the surrounding
+braces or parentheses are not required.
+This shorter form is not recommended.
+.Pp
+Variable substitution occurs at two distinct times, depending on where
+the variable is being used.
+Variables in dependency lines are expanded as the line is read.
+Variables in shell commands are expanded when the shell command is
+executed.
+.Ss Variable classes
+The four different classes of variables (in order of increasing precedence)
+are:
+.Bl -tag -width Ds
+.It Environment variables
+Variables defined as part of
+.Nm Ns 's
+environment.
+.It Global variables
+Variables defined in the makefile or in included makefiles.
+.It Command line variables
+Variables defined as part of the command line.
+.It Local variables
+Variables that are defined specific to a certain target.
+The seven local variables are as follows:
+.Bl -tag -width ".ARCHIVE"
+.It Va .ALLSRC
+The list of all sources for this target; also known as
+.Ql Va \&\*[Gt] .
+.It Va .ARCHIVE
+The name of the archive file.
+.It Va .IMPSRC
+The name/path of the source from which the target is to be transformed
+(the ``implied'' source); also known as
+.Ql Va \&\*[Lt] .
+.It Va .MEMBER
+The name of the archive member.
+.It Va .OODATE
+The list of sources for this target that were deemed out-of-date; also
+known as
+.Ql Va \&? .
+.It Va .PREFIX
+The file prefix of the file, containing only the file portion, no suffix
+or preceding directory components; also known as
+.Ql Va * .
+.It Va .TARGET
+The name of the target; also known as
+.Ql Va @ .
+.El
+.Pp
+The shorter forms
+.Ql Va @ ,
+.Ql Va \&? ,
+.Ql Va \&\*[Lt] ,
+.Ql Va \&\*[Gt] ,
+and
+.Ql Va *
+are permitted for backward
+compatibility with historical makefiles and are not recommended.
+The six variables
+.Ql Va "@F" ,
+.Ql Va "@D" ,
+.Ql Va "\*[Lt]F" ,
+.Ql Va "\*[Lt]D" ,
+.Ql Va "*F" ,
+and
+.Ql Va "*D"
+are permitted for compatibility with
+.At V
+makefiles and are not recommended.
+.Pp
+Four of the local variables may be used in sources on dependency lines
+because they expand to the proper value for each target on the line.
+These variables are
+.Ql Va .TARGET ,
+.Ql Va .PREFIX ,
+.Ql Va .ARCHIVE ,
+and
+.Ql Va .MEMBER .
+.El
+.Ss Additional inbuilt variables
+In addition,
+.Nm
+sets or knows about the following variables:
+.Bl -tag -width .MAKEOVERRIDES
+.It Va \&$
+A single dollar sign
+.Ql \&$ ,
+i.e.
+.Ql \&$$
+expands to a single dollar
+sign.
+.It Va .ALLTARGETS
+The list of all targets encountered in the Makefile.
+If evaluated during
+Makefile parsing, lists only those targets encountered thus far.
+.It Va .CURDIR
+A path to the directory where
+.Nm
+was executed.
+Refer to the description of
+.Ql Ev PWD
+for more details.
+.It Ev MAKE
+The name that
+.Nm
+was executed with
+.Pq Va argv[0] .
+For compatibily
+.Nm
+also sets
+.Va .MAKE
+with the same value.
+The preferred variable to use is the environment variable
+.Ev MAKE
+because it is more compatible with other versions of
+.Nm
+and cannot be confused with the special target with the same name.
+.It Ev MAKEFLAGS
+The environment variable
+.Ql Ev MAKEFLAGS
+may contain anything that
+may be specified on
+.Nm Ns 's
+command line.
+Anything specified on
+.Nm Ns 's
+command line is appended to the
+.Ql Ev MAKEFLAGS
+variable which is then
+entered into the environment for all programs which
+.Nm
+executes.
+.It Va .MAKEOVERRIDES
+This variable is used to record the names of variables assigned to
+on the command line, so that they may be exported as part of
+.Ql Ev MAKEFLAGS .
+This behaviour can be disabled by assigning an empty value to
+.Ql Va .MAKEOVERRIDES
+within a makefile.
+Extra variables can be exported from a makefile
+by appending their names to
+.Ql Va .MAKEOVERRIDES .
+.Ql Ev MAKEFLAGS
+is re-exported whenever
+.Ql Va .MAKEOVERRIDES
+is modified.
+.It Va MAKE_PRINT_VAR_ON_ERROR
+When
+.Nm
+stops due to an error, it prints its name and the value of
+.Ql Va .CURDIR
+as well as the value of any variables named in
+.Ql Va MAKE_PRINT_VAR_ON_ERROR .
+.It Va .newline
+This variable is simply assigned a newline character as its value.
+This allows expansions using the
+.Cm \&:@
+modifier to put a newline between
+iterations of the loop rather than a space.
+For example, the printing of
+.Ql Va MAKE_PRINT_VAR_ON_ERROR
+could be done as ${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'${.newline}@}.
+.It Va .OBJDIR
+A path to the directory where the targets are built.
+Its value is determined by trying to
+.Xr chdir 2
+to the following directories in order and using the first match:
+.Bl -enum
+.It
+.Ev ${MAKEOBJDIRPREFIX}${.CURDIR}
+.Pp
+(Only if
+.Ql Ev MAKEOBJDIRPREFIX
+is set in the environment or on the command line.)
+.It
+.Ev ${MAKEOBJDIR}
+.Pp
+(Only if
+.Ql Ev MAKEOBJDIR
+is set in the environment or on the command line.)
+.It
+.Ev ${.CURDIR} Ns Pa /obj. Ns Ev ${MACHINE}
+.It
+.Ev ${.CURDIR} Ns Pa /obj
+.It
+.Pa /usr/obj/ Ns Ev ${.CURDIR}
+.It
+.Ev ${.CURDIR}
+.El
+.Pp
+Variable expansion is performed on the value before it's used,
+so expressions such as
+.Dl ${.CURDIR:C,^/usr/src,/var/obj,}
+may be used.
+.Pp
+.Ql Va .OBJDIR
+may be modified in the makefile as a global variable.
+In all cases, 
+.Nm
+will
+.Xr chdir 2
+to
+.Ql Va .OBJDIR
+and set
+.Ql Ev PWD
+to that directory before executing any targets.
+.
+.It Va .PARSEDIR
+A path to the directory of the current
+.Ql Pa Makefile
+being parsed.
+.It Va .PARSEFILE
+The basename of the current
+.Ql Pa Makefile
+being parsed.
+This variable and
+.Ql Va .PARSEDIR
+are both set only while the
+.Ql Pa Makefiles
+are being parsed.
+.It Va .PATH
+A variable that represents the list of directories that
+.Nm
+will search for files.
+The search list should be updated using the target
+.Ql Va .PATH
+rather than the variable.
+.It Ev PWD
+Alternate path to the current directory.
+.Nm
+normally sets
+.Ql Va .CURDIR
+to the canonical path given by
+.Xr getcwd 3 .
+However, if the environment variable
+.Ql Ev PWD
+is set and gives a path to the current directory, then
+.Nm
+sets
+.Ql Va .CURDIR
+to the value of
+.Ql Ev PWD
+instead.
+This behaviour is disabled if
+.Ql Ev MAKEOBJDIRPREFIX
+is set or
+.Ql Ev MAKEOBJDIR
+contains a variable transform.
+.Ql Ev PWD
+is set to the value of
+.Ql Va .OBJDIR
+for all programs which
+.Nm
+executes.
+.El
+.Ss Variable modifiers
+Variable expansion may be modified to select or modify each word of the
+variable (where a ``word'' is white-space delimited sequence of characters).
+The general format of a variable expansion is as follows:
+.Pp
+.Dl {variable[:modifier[:...]]}
+.Pp
+Each modifier begins with a colon,
+which may be escaped with a backslash
+.Pq Ql \e .
+The supported modifiers are:
+.Bl -tag -width EEE
+.It Cm \&:E
+Replaces each word in the variable with its suffix.
+.It Cm \&:H
+Replaces each word in the variable with everything but the last component.
+.It Cm \&:M Ns Ar pattern
+Select only those words that match
+.Ar pattern .
+The standard shell wildcard characters
+.Pf ( Ql * ,
+.Ql \&? ,
+and
+.Ql Op )
+may
+be used.
+The wildcard characters may be escaped with a backslash
+.Pq Ql \e .
+.It Cm \&:N Ns Ar pattern
+This is identical to
+.Ql Cm \&:M ,
+but selects all words which do not match
+.Ar pattern .
+.It Cm \&:O
+Order every word in variable alphabetically.
+To sort words in
+reverse order use the
+.Ql Cm \&:O:[-1..1]
+combination of modifiers.
+.It Cm \&:Ox
+Randomize words in variable.
+The results will be different each time you are referring to the
+modified variable; use the assignment with expansion
+.Pq Ql Cm \&:=
+to prevent such behaviour.
+For example,
+.Bd -literal -offset indent
+LIST=			uno due tre quattro
+RANDOM_LIST=		${LIST:Ox}
+STATIC_RANDOM_LIST:=	${LIST:Ox}
+
+all:
+	@echo "${RANDOM_LIST}"
+	@echo "${RANDOM_LIST}"
+	@echo "${STATIC_RANDOM_LIST}"
+	@echo "${STATIC_RANDOM_LIST}"
+.Ed
+may produce output similar to:
+.Bd -literal -offset indent
+quattro due tre uno
+tre due quattro uno
+due uno quattro tre
+due uno quattro tre
+.Ed
+.It Cm \&:Q
+Quotes every shell meta-character in the variable, so that it can be passed
+safely through recursive invocations of
+.Nm .
+.It Cm \&:R
+Replaces each word in the variable with everything but its suffix.
+.It Cm \&:tl
+Converts variable to lower-case letters.
+.It Cm \&:ts Ns Ar c
+Words in the variable are normally separated by a space on expansion.
+This modifier sets the separator to the character
+.Ar c .
+If
+.Ar c
+is omitted, then no separator is used.
+.It Cm \&:tu
+Converts variable to upper-case letters.
+.It Cm \&:tW
+Causes the value to be treated as a single word
+(possibly containing embedded white space).
+See also
+.Ql Cm \&:[*] .
+.It Cm \&:tw
+Causes the value to be treated as a sequence of
+words delimited by white space.
+See also
+.Ql Cm \&:[@] .
+.Sm off
+.It Cm \&:S No \&/ Ar old_string Xo
+.No \&/ Ar new_string
+.No \&/ Op Cm 1gW
+.Xc
+.Sm on
+Modify the first occurrence of
+.Ar old_string
+in the variable's value, replacing it with
+.Ar new_string .
+If a
+.Ql g
+is appended to the last slash of the pattern, all occurrences
+in each word are replaced.
+If a
+.Ql 1
+is appended to the last slash of the pattern, only the first word
+is affected.
+If a
+.Ql W
+is appended to the last slash of the pattern,
+then the value is treated as a single word
+(possibly containing embedded white space).
+If
+.Ar old_string
+begins with a caret
+.Pq Ql ^ ,
+.Ar old_string
+is anchored at the beginning of each word.
+If
+.Ar old_string
+ends with a dollar sign
+.Pq Ql \&$ ,
+it is anchored at the end of each word.
+Inside
+.Ar new_string ,
+an ampersand
+.Pq Ql \*[Am]
+is replaced by
+.Ar old_string
+(without any
+.Ql ^
+or
+.Ql \&$ ) .
+Any character may be used as a delimiter for the parts of the modifier
+string.
+The anchoring, ampersand and delimiter characters may be escaped with a
+backslash
+.Pq Ql \e .
+.Pp
+Variable expansion occurs in the normal fashion inside both
+.Ar old_string
+and
+.Ar new_string
+with the single exception that a backslash is used to prevent the expansion
+of a dollar sign
+.Pq Ql \&$ ,
+not a preceding dollar sign as is usual.
+.Sm off
+.It Cm \&:C No \&/ Ar pattern Xo
+.No \&/ Ar replacement
+.No \&/ Op Cm 1gW
+.Xc
+.Sm on
+The
+.Cm \&:C
+modifier is just like the
+.Cm \&:S
+modifier except that the old and new strings, instead of being
+simple strings, are a regular expression (see
+.Xr regex 3 )
+string
+.Ar pattern
+and an
+.Xr ed 1 Ns \-style
+string
+.Ar replacement .
+Normally, the first occurrence of the pattern
+.Ar pattern
+in each word of the value is substituted with
+.Ar replacement .
+The
+.Ql 1
+modifier causes the substitution to apply to at most one word; the
+.Ql g
+modifier causes the substitution to apply to as many instances of the
+search pattern
+.Ar pattern
+as occur in the word or words it is found in; the
+.Ql W
+modifier causes the value to be treated as a single word
+(possibly containing embedded white space).
+Note that
+.Ql 1
+and
+.Ql g
+are orthogonal; the former specifies whether multiple words are
+potentially affected, the latter whether multiple substitutions can
+potentially occur within each affected word.
+.It Cm \&:T
+Replaces each word in the variable with its last component.
+.It Cm \&:u
+Remove adjacent duplicate words (like
+.Xr uniq 1 ) .
+.Sm off
+.It Cm \&:\&? Ar true_string Cm \&: Ar false_string
+.Sm on
+If the variable (actually an expression; see below)
+evaluates to true, return as its value the
+.Ar true_string ,
+otherwise return the
+.Ar false_string .
+.It Ar :old_string=new_string
+This is the
+.At V
+style variable substitution.
+It must be the last modifier specified.
+If
+.Ar old_string
+or
+.Ar new_string
+do not contain the pattern matching character
+.Ar %
+then it is assumed that they are
+anchored at the end of each word, so only suffixes or entire
+words may be replaced.
+Otherwise
+.Ar %
+is the substring of
+.Ar old_string
+to be replaced in
+.Ar new_string .
+.Pp
+Variable expansion occurs in the normal fashion inside both
+.Ar old_string
+and
+.Ar new_string
+with the single exception that a backslash is used to prevent the
+expansion of a dollar sign
+.Pq Ql \&$ ,
+not a preceding dollar sign as is usual.
+.Sm off
+.It Cm \&:@ Ar temp Cm @ Xo
+.Ar string Cm @
+.Sm on
+.Xc
+This is the loop expansion mechanism from the OSF Development
+Environment (ODE) make.
+Unlike
+.Cm \&.for
+loops expansion occurs at the time of
+reference.
+Assign
+.Ar temp
+to each word in the variable and evaluate
+.Ar string .
+The ODE convention is that
+.Ar temp
+should start and end with a period.
+For example.
+.Dl ${LINKS:@.LINK.@${LN} ${TARGET} ${.LINK.}@}
+.It Cm \&:U Ns Ar newval
+If the variable is undefined
+.Ar newval
+is the value.
+If the variable is defined, the existing value is returned.
+This is another ODE make feature.
+It is handy for setting per-target CFLAGS for instance:
+.Dl ${_${.TARGET:T}_CFLAGS:U${DEF_CFLAGS}}
+If a value is only required if the variable is undefined, use:
+.Dl ${VAR:D:Unewval}
+.It Cm \&:D Ns Ar newval
+If the variable is defined
+.Ar newval
+is the value.
+.It Cm \&:L
+The name of the variable is the value.
+.It Cm \&:P
+The path of the node which has the same name as the variable
+is the value.
+If no such node exists or its path is null, then the
+name of the variable is used.
+.Sm off
+.It Cm \&:\&! Ar cmd Cm \&!
+.Sm on
+The output of running
+.Ar cmd
+is the value.
+.It Cm \&:sh
+If the variable is non-empty it is run as a command and the output
+becomes the new value.
+.It Cm \&::= Ns Ar str
+The variable is assigned the value
+.Ar str
+after substitution.
+This modifier and its variations are useful in
+obscure situations such as wanting to apply modifiers to
+.Cm \&.for
+loop iteration variables which won't work due to the way
+.Cm \&.for
+loops are implemented.
+These assignment modifiers always expand to
+nothing, so if appearing in a rule line by themselves should be
+preceded with something to keep
+.Nm
+happy.
+As in:
+.Bd -literal
+use_foo: \&.USE
+\&.for i in ${\&.TARGET} ${\&.TARGET:R}\&.gz
+	@: ${t::=$i}
+	@echo t:R:T=${t:R:T}
+\&.endfor
+
+.Ed
+The
+.Ql Cm \&::
+helps avoid false matches with the
+.At V
+style
+.Cm \&:=
+modifier and since substitution always occurs the
+.Cm \&::=
+form is vaguely appropriate.
+.It Cm \&::?= Ns Ar str
+As for
+.Cm \&::=
+but only if the variable does not already have a value.
+.It Cm \&::+= Ns Ar str
+Append
+.Ar str
+to the variable.
+.It Cm \&::!= Ns Ar cmd
+Assign the output of
+.Ar cmd
+to the variable.
+.It Cm \&:\&[ Ns Ar range Ns Cm \&]
+Selects one or more words from the value,
+or performs other operations related to the way in which the
+value is divided into words.
+.Pp
+Ordinarily, a value is treated as a sequence of words
+delimited by white space.
+Some modifiers suppress this behaviour,
+causing a value to be treated as a single word
+(possibly containing embedded white space).
+An empty value, or a value that consists entirely of white-space,
+is treated as a single word.
+For the purposes of the
+.Ql Cm \&:[]
+modifier, the words are indexed both forwards using positive integers
+(where index 1 represents the first word),
+and backwards using negative integers
+(where index -1 represents the last word).
+.Pp
+The
+.Ar range
+is subjected to variable expansion, and the expanded result is
+then interpreted as follows:
+.Bl -tag -width index
+.\" :[n]
+.It Ar index
+Selects a single word from the value.
+.\" :[start..end]
+.It Ar start Ns Cm \&.. Ns Ar end
+Selects all words from
+.Ar start
+to
+.Ar end ,
+inclusive.
+For example,
+.Ql Cm \&:[2..-1]
+selects all words from the second word to the last word.
+If
+.Ar start
+is greater than
+.Ar end ,
+then the words are output in reverse order.
+For example,
+.Ql Cm \&:[-1..1]
+selects all the words from last to first.
+.\" :[*]
+.It Cm \&*
+Causes subsequent modifiers to treat the value as a single word
+(possibly containing embedded white space).
+Analogous to the effect of
+\&"$*\&"
+in Bourne shell.
+.\" :[0]
+.It 0
+Means the same as
+.Ql Cm \&:[*] .
+.\" :[*]
+.It Cm \&@
+Causes subsequent modifiers to treat the value as a sequence of words
+delimited by white space.
+Analogous to the effect of
+\&"$@\&"
+in Bourne shell.
+.\" :[#]
+.It Cm \&#
+Returns the number of words in the value.
+.El \" :[range]
+.El
+.Sh INCLUDE STATEMENTS, CONDITIONALS AND FOR LOOPS
+Makefile inclusion, conditional structures and for loops  reminiscent
+of the C programming language are provided in
+.Nm .
+All such structures are identified by a line beginning with a single
+dot
+.Pq Ql \&.
+character.
+Files are included with either
+.Cm \&.include Aq Ar file
+or
+.Cm \&.include Pf \*q Ar file Ns \*q .
+Variables between the angle brackets or double quotes are expanded
+to form the file name.
+If angle brackets are used, the included makefile is expected to be in
+the system makefile directory.
+If double quotes are used, the including makefile's directory and any
+directories specified using the
+.Fl I
+option are searched before the system
+makefile directory.
+For compatibility with other versions of
+.Nm
+.Ql include file ...
+is also accepted.
+If the include statement is written as
+.Cm .-include
+or as
+.Cm .sinclude
+then errors locating and/or opening include files are ignored.
+.Pp
+Conditional expressions are also preceded by a single dot as the first
+character of a line.
+The possible conditionals are as follows:
+.Bl -tag -width Ds
+.It Ic .undef Ar variable
+Un-define the specified global variable.
+Only global variables may be un-defined.
+.It Xo
+.Ic \&.if
+.Oo \&! Oc Ns Ar expression
+.Op Ar operator expression ...
+.Xc
+Test the value of an expression.
+.It Xo
+.Ic .ifdef
+.Oo \&! Oc Ns Ar variable
+.Op Ar operator variable ...
+.Xc
+Test the value of a variable.
+.It Xo
+.Ic .ifndef
+.Oo \&! Oc Ns Ar variable
+.Op Ar operator variable ...
+.Xc
+Test the value of a variable.
+.It Xo
+.Ic .ifmake
+.Oo \&! Oc Ns Ar target
+.Op Ar operator target ...
+.Xc
+Test the target being built.
+.It Xo
+.Ic .ifnmake
+.Oo \&! Ns Oc Ar target
+.Op Ar operator target ...
+.Xc
+Test the target being built.
+.It Ic .else
+Reverse the sense of the last conditional.
+.It Xo
+.Ic .elif
+.Oo \&! Ns Oc Ar expression
+.Op Ar operator expression ...
+.Xc
+A combination of
+.Ql Ic .else
+followed by
+.Ql Ic .if .
+.It Xo
+.Ic .elifdef
+.Oo \&! Oc Ns Ar variable
+.Op Ar operator variable ...
+.Xc
+A combination of
+.Ql Ic .else
+followed by
+.Ql Ic .ifdef .
+.It Xo
+.Ic .elifndef
+.Oo \&! Oc Ns Ar variable
+.Op Ar operator variable ...
+.Xc
+A combination of
+.Ql Ic .else
+followed by
+.Ql Ic .ifndef .
+.It Xo
+.Ic .elifmake
+.Oo \&! Oc Ns Ar target
+.Op Ar operator target ...
+.Xc
+A combination of
+.Ql Ic .else
+followed by
+.Ql Ic .ifmake .
+.It Xo
+.Ic .elifnmake
+.Oo \&! Oc Ns Ar target
+.Op Ar operator target ...
+.Xc
+A combination of
+.Ql Ic .else
+followed by
+.Ql Ic .ifnmake .
+.It Ic .endif
+End the body of the conditional.
+.El
+.Pp
+The
+.Ar operator
+may be any one of the following:
+.Bl -tag -width "Cm XX"
+.It Cm \&|\&|
+Logical OR.
+.It Cm \&\*[Am]\*[Am]
+Logical
+.Tn AND ;
+of higher precedence than
+.Dq \&|\&| .
+.El
+.Pp
+As in C,
+.Nm
+will only evaluate a conditional as far as is necessary to determine
+its value.
+Parentheses may be used to change the order of evaluation.
+The boolean operator
+.Ql Ic \&!
+may be used to logically negate an entire
+conditional.
+It is of higher precedence than
+.Ql Ic \&\*[Am]\*[Am] .
+.Pp
+The value of
+.Ar expression
+may be any of the following:
+.Bl -tag -width defined
+.It Ic defined
+Takes a variable name as an argument and evaluates to true if the variable
+has been defined.
+.It Ic make
+Takes a target name as an argument and evaluates to true if the target
+was specified as part of
+.Nm Ns 's
+command line or was declared the default target (either implicitly or
+explicitly, see
+.Va .MAIN )
+before the line containing the conditional.
+.It Ic empty
+Takes a variable, with possible modifiers, and evaluates to true if
+the expansion of the variable would result in an empty string.
+.It Ic exists
+Takes a file name as an argument and evaluates to true if the file exists.
+The file is searched for on the system search path (see
+.Va .PATH ) .
+.It Ic target
+Takes a target name as an argument and evaluates to true if the target
+has been defined.
+.It Ic commands
+Takes a target name as an argument and evaluates to true if the target
+has been defined and has commands associated with it.
+.El
+.Pp
+.Ar Expression
+may also be an arithmetic or string comparison.
+Variable expansion is
+performed on both sides of the comparison, after which the integral
+values are compared.
+A value is interpreted as hexadecimal if it is
+preceded by 0x, otherwise it is decimal; octal numbers are not supported.
+The standard C relational operators are all supported.
+If after
+variable expansion, either the left or right hand side of a
+.Ql Ic ==
+or
+.Ql Ic "!="
+operator is not an integral value, then
+string comparison is performed between the expanded
+variables.
+If no relational operator is given, it is assumed that the expanded
+variable is being compared against 0 or an empty string in the case
+of a string comparison.
+.Pp
+When
+.Nm
+is evaluating one of these conditional expression, and it encounters
+a word it doesn't recognize, either the ``make'' or ``defined''
+expression is applied to it, depending on the form of the conditional.
+If the form is
+.Ql Ic .ifdef
+or
+.Ql Ic .ifndef ,
+the ``defined'' expression
+is applied.
+Similarly, if the form is
+.Ql Ic .ifmake
+or
+.Ql Ic .ifnmake , the ``make''
+expression is applied.
+.Pp
+If the conditional evaluates to true the parsing of the makefile continues
+as before.
+If it evaluates to false, the following lines are skipped.
+In both cases this continues until a
+.Ql Ic .else
+or
+.Ql Ic .endif
+is found.
+.Pp
+For loops are typically used to apply a set of rules to a list of files.
+The syntax of a for loop is:
+.Pp
+.Bl -tag -compact -width Ds
+.It Xo
+.Ic \&.for
+.Ar variable
+.Op Ar variable ...
+.Ic in
+.Ar expression
+.Xc
+.It Aq make-rules
+.It Ic \&.endfor
+.El
+.Pp
+After the for
+.Ic expression
+is evaluated, it is split into words.
+On each iteration of the loop, one word is taken and assigned to each
+.Ic variable ,
+in order, and these
+.Ic variables
+are substituted into the
+.Ic make-rules
+inside the body of the for loop.
+The number of words must come out even; that is, if there are three
+iteration variables, the number of words provided must be a multiple
+of three.
+.Sh COMMENTS
+Comments begin with a hash
+.Pq Ql \&#
+character, anywhere but in a shell
+command line, and continue to the end of an unescaped new line.
+.Sh SPECIAL SOURCES (ATTRIBUTES)
+.Bl -tag -width .IGNOREx
+.It Ic .EXEC
+Target is never out of date, but always execute commands anyway.
+.It Ic .IGNORE
+Ignore any errors from the commands associated with this target, exactly
+as if they all were preceded by a dash
+.Pq Ql \- .
+.\" .It Ic .INVISIBLE
+.\" XXX
+.\" .It Ic .JOIN
+.\" XXX
+.It Ic .MADE
+Mark all sources of this target as being up-to-date.
+.It Ic .MAKE
+Execute the commands associated with this target even if the
+.Fl n
+or
+.Fl t
+options were specified.
+Normally used to mark recursive
+.Nm Ns 's .
+.It Ic .NOPATH
+Do not search for the target in the directories specified by
+.Ic .PATH .
+.It Ic .NOTMAIN
+Normally
+.Nm
+selects the first target it encounters as the default target to be built
+if no target was specified.
+This source prevents this target from being selected.
+.It Ic .OPTIONAL
+If a target is marked with this attribute and
+.Nm
+can't figure out how to create it, it will ignore this fact and assume
+the file isn't needed or already exists.
+.It Ic .PHONY
+The target does not
+correspond to an actual file; it is always considered to be out of date,
+and will not be created with the
+.Fl t
+option.
+.It Ic .PRECIOUS
+When
+.Nm
+is interrupted, it removes any partially made targets.
+This source prevents the target from being removed.
+.It Ic .RECURSIVE
+Synonym for
+.Ic .MAKE .
+.It Ic .SILENT
+Do not echo any of the commands associated with this target, exactly
+as if they all were preceded by an at sign
+.Pq Ql @ .
+.It Ic .USE
+Turn the target into
+.Nm Ns 's
+version of a macro.
+When the target is used as a source for another target, the other target
+acquires the commands, sources, and attributes (except for
+.Ic .USE )
+of the
+source.
+If the target already has commands, the
+.Ic .USE
+target's commands are appended
+to them.
+.It Ic .USEBEFORE
+Exactly like
+.Ic .USE ,
+but prepend the
+.Ic .USEBEFORE
+target commands to the target.
+.It Ic .WAIT
+If
+.Ic .WAIT
+appears in a dependency line, the sources that precede it are
+made before the sources that succeed it in the line.
+Loops are not
+detected and targets that form loops will be silently ignored.
+.El
+.Sh SPECIAL TARGETS
+Special targets may not be included with other targets, i.e. they must be
+the only target specified.
+.Bl -tag -width .BEGINx
+.It Ic .BEGIN
+Any command lines attached to this target are executed before anything
+else is done.
+.It Ic .DEFAULT
+This is sort of a
+.Ic .USE
+rule for any target (that was used only as a
+source) that
+.Nm
+can't figure out any other way to create.
+Only the shell script is used.
+The
+.Ic .IMPSRC
+variable of a target that inherits
+.Ic .DEFAULT Ns 's
+commands is set
+to the target's own name.
+.It Ic .END
+Any command lines attached to this target are executed after everything
+else is done.
+.It Ic .IGNORE
+Mark each of the sources with the
+.Ic .IGNORE
+attribute.
+If no sources are specified, this is the equivalent of specifying the
+.Fl i
+option.
+.It Ic .INTERRUPT
+If
+.Nm
+is interrupted, the commands for this target will be executed.
+.It Ic .MAIN
+If no target is specified when
+.Nm
+is invoked, this target will be built.
+.It Ic .MAKEFLAGS
+This target provides a way to specify flags for
+.Nm
+when the makefile is used.
+The flags are as if typed to the shell, though the
+.Fl f
+option will have
+no effect.
+.\" XXX: NOT YET!!!!
+.\" .It Ic .NOTPARALLEL
+.\" The named targets are executed in non parallel mode.
+.\" If no targets are
+.\" specified, then all targets are executed in non parallel mode.
+.It Ic .NOPATH
+Apply the
+.Ic .NOPATH
+attribute to any specified sources.
+.It Ic .NOTPARALLEL
+Disable parallel mode.
+.It Ic .NO_PARALLEL
+Synonym for
+.Ic .NOTPARALLEL ,
+for compatibility with other pmake variants.
+.It Ic .ORDER
+The named targets are made in sequence.
+.\" XXX: NOT YET!!!!
+.\" .It Ic .PARALLEL
+.\" The named targets are executed in parallel mode.
+.\" If no targets are
+.\" specified, then all targets are executed in parallel mode.
+.It Ic .PATH
+The sources are directories which are to be searched for files not
+found in the current directory.
+If no sources are specified, any previously specified directories are
+deleted.
+If the source is the special
+.Ic .DOTLAST
+target, then the current working
+directory is searched last.
+.It Ic .PHONY
+Apply the
+.Ic .PHONY
+attribute to any specified sources.
+.It Ic .PRECIOUS
+Apply the
+.Ic .PRECIOUS
+attribute to any specified sources.
+If no sources are specified, the
+.Ic .PRECIOUS
+attribute is applied to every
+target in the file.
+.It Ic .SHELL
+Sets the shell that
+.Nm
+will use to execute commands.
+The sources are a set of
+.Ar field=value
+pairs.
+.Bl -tag -width hasErrCtls
+.It Ar name
+This is the minimal specification, used to select one of the builtin
+shell specs;
+.Ar sh ,
+.Ar ksh ,
+and
+.Ar csh .
+.It Ar path
+Specifies the path to the shell.
+.It Ar hasErrCtl
+Indicates whether the shell supports exit on error.
+.It Ar check
+The command to turn on error checking.
+.It Ar ignore
+The command to disable error checking.
+.It Ar echo
+The command to turn on echoing of commands executed.
+.It Ar quiet
+The command to turn off echoing of commands executed.
+.It Ar filter
+The output to filter after issuing the
+.Ar quiet
+command.
+It is typically identical to
+.Ar quiet .
+.It Ar errFlag
+The flag to pass the shell to enable error checking.
+.It Ar echoFlag
+The flag to pass the shell to enable command echoing.
+.El
+Example:
+.Bd -literal
+\&.SHELL: name=ksh path=/bin/ksh hasErrCtl=true \\
+	check="set -e" ignore="set +e" \\
+	echo="set -v" quiet="set +v" filter="set +v" \\
+	echoFlag=v errFlag=e
+.Ed
+.It Ic .SILENT
+Apply the
+.Ic .SILENT
+attribute to any specified sources.
+If no sources are specified, the
+.Ic .SILENT
+attribute is applied to every
+command in the file.
+.It Ic .SUFFIXES
+Each source specifies a suffix to
+.Nm .
+If no sources are specified, any previously specified suffixes are deleted.
+.El
+.Sh ENVIRONMENT
+.Nm
+uses the following environment variables, if they exist:
+.Ev MACHINE ,
+.Ev MACHINE_ARCH ,
+.Ev MAKE ,
+.Ev MAKEFLAGS ,
+.Ev MAKEOBJDIR ,
+.Ev MAKEOBJDIRPREFIX ,
+.Ev MAKESYSPATH ,
+and
+.Ev PWD .
+.Pp
+.Ev MAKEOBJDIRPREFIX
+and
+.Ev MAKEOBJDIR
+may only be set in the environment or on the command line to
+.Nm
+and not as makefile variables;
+see the description of
+.Ql Va .OBJDIR
+for more details.
+.Sh FILES
+.Bl -tag -width /usr/share/mk -compact
+.It .depend
+list of dependencies
+.It Makefile
+list of dependencies
+.It makefile
+list of dependencies
+.It sys.mk
+system makefile
+.It /usr/share/mk
+system makefile directory
+.El
+.Sh SEE ALSO
+.Xr mkdep 1
+.Sh HISTORY
+.Nm
+is derived from NetBSD's
+.Xr make 1 .
+It uses autoconf to facilitate portability to other platforms.