Use more man page entities, now that we have them.

6 files changed, 21 insertions, 21 deletions

diff --git a/doc/guide/files/build.xml b/doc/guide/files/build.xml
index 3e055b6e805..1e9e3fdce7e 100644
--- a/doc/guide/files/build.xml
+++ b/doc/guide/files/build.xml
@@ -1,4 +1,4 @@
-<!-- $NetBSD: build.xml,v 1.3 2004/12/03 12:48:15 wiz Exp $ -->
+<!-- $NetBSD: build.xml,v 1.4 2005/05/08 13:53:06 wiz Exp $ -->
 
 <chapter id="build">
   <title>The build process</title>
@@ -93,7 +93,7 @@
 	  in <varname>X11BASE</varname> and some in <varname>LOCALBASE</varname>.
 	  To determine the prefix of an installed package, the
 	  <varname>EVAL_PREFIX</varname> definition can be used. It takes pairs in the
-	  format <quote>DIRNAME=&lt;package&gt;</quote>, and the make(1) variable
+	  format <quote>DIRNAME=&lt;package&gt;</quote>, and the &man.make.1; variable
 	  <varname>DIRNAME</varname> will be set to the prefix of the installed
 	  package &lt;package&gt;, or <quote>${X11PREFIX}</quote> if the package is
 	  not installed.</para>
@@ -120,7 +120,7 @@ CONFIGURE_ARGS+=	--with-guile-prefix=${LOCALBASE}	\
       
       <listitem>
         <para>Within <filename>${PREFIX}</filename>, packages should
-          install files according to hier(7), with the exception that
+          install files according to &man.hier.7;, with the exception that
           manual pages go into <filename>${PREFIX}/man</filename>, not
           <filename>${PREFIX}/share/man</filename>.</para> 
       </listitem>
@@ -225,11 +225,11 @@ CONFIGURE_ARGS+=	--with-guile-prefix=${LOCALBASE}	\
 	    Patchfiles ending in <filename>.Z</filename> or
 	    <filename>.gz</filename> are uncompressed before they are applied,
 	    files ending in <filename>.orig</filename> or
-	    <filename>.rej</filename> are ignored. Any special options to patch(1)
+	    <filename>.rej</filename> are ignored. Any special options to &man.patch.1;
 	    can be handed in <varname>PATCH_DIST_ARGS</varname>.
 	    See <xref linkend="components.patches"/> for more details.</para>
 
-	  <para>By default patch(1) is given special args to make it fail if the
+	  <para>By default &man.patch.1; is given special args to make it fail if the
 	    patches apply with some lines of fuzz. Please fix (regen) the patches
 	    so that they apply cleanly. The rationale behind this is that
 	    patches that don't apply cleanly may end up being applied in the wrong
@@ -363,7 +363,7 @@ make build</programlisting>
 	<term>deinstall</term>
 
 	<listitem>
-	  <para>This target does a pkg_delete(1) in the current directory,
+	  <para>This target does a &man.pkg.delete.1; in the current directory,
 	    effectively de-installing the package. The following variables can
 	    be used to tune the behaviour:</para>
 
@@ -648,7 +648,7 @@ make build</programlisting>
 	    diff the output of this command against an already
 	    existing <filename>PLIST</filename> file.</para>
 
-	  <para>If the package installs files via tar(1) or other
+	  <para>If the package installs files via &man.tar.1; or other
 	    methods that don't update file access times, be sure to
 	    add these files manually to your
 	    <filename>PLIST</filename>, as the <quote>find
diff --git a/doc/guide/files/faq.xml b/doc/guide/files/faq.xml
index 31f75b36a18..c7538793236 100644
--- a/doc/guide/files/faq.xml
+++ b/doc/guide/files/faq.xml
@@ -1,4 +1,4 @@
-<!-- $NetBSD: faq.xml,v 1.6 2005/05/07 15:28:40 rillig Exp $ -->
+<!-- $NetBSD: faq.xml,v 1.7 2005/05/08 13:53:06 wiz Exp $ -->
 
 <chapter id="faq"> <?dbhtml filename="faq.html"?>
   <title>Frequently Asked Questions</title>
@@ -249,7 +249,7 @@
 	<varname>PKG_RESUME_TRANSFERS=YES</varname> into 
 	<filename>/etc/mk.conf</filename>. If, during a fetch step, an
 	incomplete distfile is found, pkgsrc will try to resume it.</para>
-    <para>You can also use a different program than the default ftp(1) by
+    <para>You can also use a different program than the default &man.ftp.1; by
 	changing the <varname>FETCH_CMD</varname> variable.
 	Don't forget to set <varname>FETCH_RESUME_ARGS</varname> and
 	<varname>FETCH_OUTPUT_ARGS</varname> if you are not using default
@@ -349,7 +349,7 @@ http_proxy=http://orpheus.amdahl.com:80/</programlisting>
       fetch-list</command> in <filename>/usr/pkgsrc</filename> or one
       of it's subdirectories, carry the resulting list to your machine
       at work/school and use it there. If you don't have a
-      NetBSD-compatible ftp(1) (like lukemftp) at work, don't forget
+      NetBSD-compatible &man.ftp.1; (like lukemftp) at work, don't forget
       to set <varname>FETCH_CMD</varname> to something that fetches a
       URL: </para>
 
@@ -422,7 +422,7 @@ http_proxy=http://orpheus.amdahl.com:80/</programlisting>
 
     <para>
       When installing packages as non-root user and using the
-      just-in-time su(1) feature of pkgsrc, it can become annoying to
+      just-in-time &man.su.1; feature of pkgsrc, it can become annoying to
       type in the root password for each required package
       installed. To avoid this, the sudo package can be used, which
       does password caching over a limited time.  To use it, install
diff --git a/doc/guide/files/fixes.xml b/doc/guide/files/fixes.xml
index 609f6ce6e36..395748bd777 100644
--- a/doc/guide/files/fixes.xml
+++ b/doc/guide/files/fixes.xml
@@ -1,4 +1,4 @@
-<!-- $NetBSD: fixes.xml,v 1.12 2005/04/17 09:38:26 wiz Exp $ -->
+<!-- $NetBSD: fixes.xml,v 1.13 2005/05/08 13:53:06 wiz Exp $ -->
 
 <chapter id="fixes"> <?dbhtml filename="fixes.html"?>
   <title>Notes on fixes for packages</title>
@@ -261,7 +261,7 @@
       <para> Please also note the <varname>BUILD_USES_MSGFMT</varname>
         and <varname>BUILD_USES_GETTEXT_M4</varname> definitions, which
         are provided as convenience definitions.  The former works out
-        whether msgfmt(1) is part of the base system, and, if it isn't,
+        whether &man.msgfmt.1; is part of the base system, and, if it isn't,
         installs the <pkg>devel/gettext</pkg> package.  The latter adds
         a build dependency on either an installed version of an older
         gettext package, or if it isn't, installs the
@@ -574,7 +574,7 @@ dynamic linker chooses the library with the greater REVISION number. </programli
 
         <listitem>
           <para>When linking shared object (<filename>.so</filename>)
-            files, i.e. files that are loaded via dlopen(3), NOT
+            files, i.e. files that are loaded via &man.dlopen.3;, NOT
             shared libraries, use <quote>-module
             -avoid-version</quote> to prevent them getting version
             tacked on.</para>
diff --git a/doc/guide/files/platforms.xml b/doc/guide/files/platforms.xml
index 30b038b2657..b39510f3351 100644
--- a/doc/guide/files/platforms.xml
+++ b/doc/guide/files/platforms.xml
@@ -1,4 +1,4 @@
-<!-- $NetBSD: platforms.xml,v 1.7 2005/04/10 22:45:25 jschauma Exp $ -->
+<!-- $NetBSD: platforms.xml,v 1.8 2005/05/08 13:53:06 wiz Exp $ -->
 
 <chapter id="platforms">
   <title>Using pkgsrc on systems other than &os;</title>
@@ -305,7 +305,7 @@
 	  url="http://freeware.sgi.com/">http://freeware.sgi.com/</ulink>.</para>
 
       <para>Please note that you will need IRIX 6.5.17 or higher, as this is the earliest
-	version of IRIX providing support for if_indextoname(3), if_nametoindex(3),
+	version of IRIX providing support for &man.if.indextoname.3;, &man.if.nametoindex.3;,
 	etc.</para>
 
       <para>At this point in time, pkgsrc only supports one ABI.  That is, you can not
@@ -387,7 +387,7 @@
         provided by icc, so binaries can be run on other systems which do not
         have the shared libraries installed.</para>
 
-     <para>Libtool, however, extracts a list of libraries from the ld(1)
+     <para>Libtool, however, extracts a list of libraries from the &man.ld.1;
         command run when linking a C++ shared library and records it, throwing
         away the -Bstatic and -Bdynamic options interspersed between the libraries.
         This means that libtool-linked C++ shared libraries will have a
diff --git a/doc/guide/files/plist.xml b/doc/guide/files/plist.xml
index 6455baf61b4..74ab556097a 100644
--- a/doc/guide/files/plist.xml
+++ b/doc/guide/files/plist.xml
@@ -1,4 +1,4 @@
-<!-- $NetBSD: plist.xml,v 1.3 2005/03/24 05:05:34 ben Exp $ -->
+<!-- $NetBSD: plist.xml,v 1.4 2005/05/08 13:53:06 wiz Exp $ -->
 
 <chapter id="plist">
   <title>PLIST issues</title>
@@ -183,7 +183,7 @@
     <para>To use one or more files as source for the <filename>PLIST</filename> used
       in generating the binary package, set the variable
       <varname>PLIST_SRC</varname> to the names of that file(s).
-      The files are later concatenated using cat(1), and order of things is
+      The files are later concatenated using &man.cat.1;, and order of things is
       important.</para>
   </sect1>
 
diff --git a/doc/guide/files/submit.xml b/doc/guide/files/submit.xml
index 8ff91159a57..6faea4fb626 100644
--- a/doc/guide/files/submit.xml
+++ b/doc/guide/files/submit.xml
@@ -1,4 +1,4 @@
-<!-- $NetBSD: submit.xml,v 1.4 2005/02/10 13:39:15 grant Exp $ -->
+<!-- $NetBSD: submit.xml,v 1.5 2005/05/08 13:53:06 wiz Exp $ -->
 
 <chapter id="submit"> <?dbhtml filename="submit.html"?>
 <title>Submitting and Committing</title>
@@ -28,7 +28,7 @@ packages here:
 <para>
   First, check that your package is complete, compiles and runs well;
   see <xref linkend="debug"/> and the rest of this document. Next,
-  generate an uuencoded gzipped tar(1) archive, preferably with all files
+  generate an uuencoded gzipped &man.tar.1; archive, preferably with all files
   in a single directory.
   Finally, <command>send-pr</command> with category <quote>pkg</quote>, a
   synopsis which includes the package name and version number, a short