Initial import of ljpeg-1.0 (from pkgsrc-wip):

In 1992, a joint ISO/CCITT committee known as JPEG (Joint Photographic
Experts Group) established and published the first draft international
standard (DIS) for compressing continuous-tone still images, both
grayscale and color. JPEG has defined four mode of operations,
summarized them as follows.

(1) Sequential encoding: each image component is encoded in a single
    left-to-right, top-to-bottom scan;
(2) Progressive encoding: the image is encoded in multiple scans for
    applications in which transmission time is long, and the viewer
    prefers to watch the image build up in multiple coarse-to-clear
    passes;
(3) Lossless encoding: the images is encoded to guarantee exact recovery
    of every source image sample value (even though the result is low
    compression compared to the lossy modes);
(4) Hierarchical encoding: the image is encoded at multiple resolutions
    so that lower-resolution versions may be accessed without first having
    to decompress the image at its full resolution.

Our lossless JPEG encoding program has an automatic prediction
selection value (PSV) selector which selects the best PSV among a
user provided or default set of PSVs. This selector guarantees the
best compression ratio for lossless JPEG.

The encoding program "pnmtoljpg" compresses a Portable Pixmap or
Portable Graymap image to a lossles JPEG (ljpg) image using the
JPEG standard (DIS) lossless mode of operation. The decoding program
"ljpgtopnm" decodes a ljpg image to either a Portable Pixmap or
Portable Graymap image depending on the number of color components
stored in the ljpg image file.

5 files changed, 116 insertions, 0 deletions

diff --git a/graphics/ljpeg/DESCR b/graphics/ljpeg/DESCR
new file mode 100644
index 00000000000..b1a152d2e8d
--- /dev/null
+++ b/graphics/ljpeg/DESCR
@@ -0,0 +1,30 @@
+In 1992, a joint ISO/CCITT committee known as JPEG (Joint Photographic
+Experts Group) established and published the first draft international
+standard (DIS) for compressing continuous-tone still images, both
+grayscale and color. JPEG has defined four mode of operations,
+summarized them as follows.
+
+(1) Sequential encoding: each image component is encoded in a single
+    left-to-right, top-to-bottom scan;
+(2) Progressive encoding: the image is encoded in multiple scans for
+    applications in which transmission time is long, and the viewer
+    prefers to watch the image build up in multiple coarse-to-clear
+    passes;
+(3) Lossless encoding: the images is encoded to guarantee exact recovery
+    of every source image sample value (even though the result is low
+    compression compared to the lossy modes);
+(4) Hierarchical encoding: the image is encoded at multiple resolutions
+    so that lower-resolution versions may be accessed without first having
+    to decompress the image at its full resolution.
+
+Our lossless JPEG encoding program has an automatic prediction
+selection value (PSV) selector which selects the best PSV among a
+user provided or default set of PSVs. This selector guarantees the
+best compression ratio for lossless JPEG.
+
+The encoding program "pnmtoljpg" compresses a Portable Pixmap or
+Portable Graymap image to a lossles JPEG (ljpg) image using the
+JPEG standard (DIS) lossless mode of operation. The decoding program
+"ljpgtopnm" decodes a ljpg image to either a Portable Pixmap or
+Portable Graymap image depending on the number of color components
+stored in the ljpg image file.
diff --git a/graphics/ljpeg/Makefile b/graphics/ljpeg/Makefile
new file mode 100644
index 00000000000..5261288dadf
--- /dev/null
+++ b/graphics/ljpeg/Makefile
@@ -0,0 +1,27 @@
+# $NetBSD: Makefile,v 1.1.1.1 2003/12/21 21:30:14 wiz Exp $
+#
+
+DISTNAME=		ljpg
+PKGNAME=		ljpg-1.0
+WRKSRC=			${WRKDIR}
+CATEGORIES=		graphics
+MASTER_SITES=		ftp://ftp.cs.cornell.edu/pub/multimed/
+EXTRACT_SUFX=		.tar.Z
+
+MAINTAINER=		wiz@NetBSD.org
+HOMEPAGE=		ftp://ftp.cs.cornell.edu/pub/multimed/
+COMMENT=		Lossless JPEG codec
+
+DIST_SUBDIR=		${PKGNAME_NOREV}
+
+USE_BUILDLINK2=		yes
+ALL_TARGET=		default
+
+post-install:
+	${INSTALL_DATA_DIR} ${PREFIX}/share/doc/ljpeg
+	${INSTALL_DATA} ${WRKSRC}/Copyright ${PREFIX}/share/doc/ljpeg
+	${INSTALL_DATA} ${WRKSRC}/README ${PREFIX}/share/doc/ljpeg
+	${INSTALL_DATA_DIR} ${PREFIX}/share/examples/ljpeg
+	${INSTALL_DATA} ${WRKSRC}/F-18* ${PREFIX}/share/examples/ljpeg
+
+.include "../../mk/bsd.pkg.mk"
diff --git a/graphics/ljpeg/PLIST b/graphics/ljpeg/PLIST
new file mode 100644
index 00000000000..563c177d642
--- /dev/null
+++ b/graphics/ljpeg/PLIST
@@ -0,0 +1,11 @@
+@comment $NetBSD: PLIST,v 1.1.1.1 2003/12/21 21:30:14 wiz Exp $
+bin/ljpgtopnm
+bin/pnmtoljpg
+man/man1/ljpgtopnm.1
+man/man1/pnmtoljpg.1
+share/doc/ljpeg/Copyright
+share/doc/ljpeg/README
+share/examples/ljpeg/F-18.ljpg
+share/examples/ljpeg/F-18.ppm
+@dirrm share/examples/ljpeg
+@dirrm share/doc/ljpeg
diff --git a/graphics/ljpeg/distinfo b/graphics/ljpeg/distinfo
new file mode 100644
index 00000000000..5b428cdc486
--- /dev/null
+++ b/graphics/ljpeg/distinfo
@@ -0,0 +1,5 @@
+$NetBSD: distinfo,v 1.1.1.1 2003/12/21 21:30:14 wiz Exp $
+
+SHA1 (ljpg-1.0/ljpg.tar.Z) = 47071fad1f11a3b9241a34b188ab07d54dcd13bc
+Size (ljpg-1.0/ljpg.tar.Z) = 334459 bytes
+SHA1 (patch-aa) = 562ce4a8f82c6ed59b4b730f59822d4749e925a3
diff --git a/graphics/ljpeg/patches/patch-aa b/graphics/ljpeg/patches/patch-aa
new file mode 100644
index 00000000000..5f24f757e56
--- /dev/null
+++ b/graphics/ljpeg/patches/patch-aa
@@ -0,0 +1,43 @@
+$NetBSD: patch-aa,v 1.1.1.1 2003/12/21 21:30:14 wiz Exp $
+
+--- Makefile.orig	Wed Jun 22 18:48:40 1994
++++ Makefile
+@@ -1,19 +1,19 @@
+ #
+ # Set BINDIR to where you want the binaries to go.
+ #
+-BINDIR= /usr/public/sun4/bin
++BINDIR= ${PREFIX}/bin
+ 
+ #
+ # Set MANDIR to where you want the man pages to go.
+ #
+-MANDIR= /usr/public/share/man/man1
++MANDIR= ${PREFIX}/man/man1
+ 
+ #
+ # Select your favorite compiler and compilation flags here.
+ #
+ #CC = cc
+-CC = gcc
+-CFLAGS= -I. -O2
++#CC = gcc
++CFLAGS+= -I.
+ #CFLAGS= +O3  -I.
+ #CFLAGS= -O2 -DDEBUG
+ 
+@@ -36,12 +36,8 @@ ljpgtopnm: $(DECODE_OBJ)
+ 	$(CC) ${CFLAGS} -o $@ $(DECODE_OBJ)
+ 
+ install: pnmtoljpg ljpgtopnm
+-	cp pnmtoljpg ljpgtopnm $(BINDIR)
+-	chmod 555 $(BINDIR)/pnmtoljpg
+-	chmod 555 $(BINDIR)/ljpgtopnm
+-	cp pnmtoljpg.1 ljpgtopnm.1 $(MANDIR)
+-	chmod 444 $(MANDIR)/pnmtoljpg.1
+-	chmod 444 $(MANDIR)/ljpgtopnm.1
++	${BSD_INSTALL_PROGRAM} pnmtoljpg ljpgtopnm $(BINDIR)
++	${BSD_INSTALL_MAN} pnmtoljpg.1 ljpgtopnm.1 $(MANDIR)
+ 
+ clean:
+ 	rm -f core *.o pnmtoljpg ljpgtopnm