Goodbye, buildlink1.

1 files changed, 0 insertions, 396 deletions

diff --git a/mk/bsd.buildlink.mk b/mk/bsd.buildlink.mk
deleted file mode 100644
index 0095538014e..00000000000
--- a/mk/bsd.buildlink.mk
+++ /dev/null
@@ -1,396 +0,0 @@
-# $NetBSD: bsd.buildlink.mk,v 1.64 2002/12/02 17:07:27 jschauma Exp $
-#
-# This Makefile fragment is included by package buildlink.mk files.  This
-# file does the following things:
-#
-# (1) Defines a macro target, _BUILDLINK_USE, that symlinks package files
-#     into a new hierarchy under ${BUILDLINK_DIR};
-# (2) Defines private variables _BUILDLINK_CPPFLAGS and _BUILDLINK_LDFLAGS
-#     containing the magic flags needed to find the buildlink'ed headers
-#     files and the buildlink'ed libraries, respectively.
-# (3) Prepends ${_BUILDLINK_CPPFLAGS} to CPPFLAGS, CFLAGS, and CXXFLAGS;
-# (4) Prepends ${_BUILDLINK_LDFLAGS} to LDFLAGS.
-# (5) Defines a macro target, _BUILDLINK_CONFIG_WRAPPER_USE, that generates
-#     a wrapper script around GTK+-style config scripts that replaces
-#     -I${LOCALBASE}/... and -L${LOCALBASE}/... with references into
-#     ${BUILDLINK_DIR}.
-#
-# The variables required to be defined prior to including this file are
-# listed below.  <pkgname> refers to the name of the package and should be
-# used consistently throughout the buildlink.mk file.
-#
-# BUILDLINK_PREFIX.<pkgname>	installation prefix of the package
-#
-# BUILDLINK_FILES.<pkgname>	files relative to ${BUILDLINK_PREFIX.<pkgname>}
-#				to be symlinked into ${BUILDLINK_DIR};
-#				libtool archive files are automatically
-#				filtered out and not linked
-#
-# BUILDLINK_TARGETS		targets to be invoked during pre-configure;
-#				the targets should be appended to this variable
-#				using +=
-#
-# The variables that may optionally be defined are:
-#
-# BUILDLINK_TRANSFORM.<pkgname>	sed arguments used to transform the name of
-#				the source filename into a destination
-#				filename
-#
-# BUILDLINK_CONFIG.<pkgname>	absolute path to GTK+-style config script
-#
-# BUILDLINK_CONFIG_WRAPPER.<pkgname>
-#				absolute path for generated wrapper script;
-#				this should be under ${BUILDLINK_DIR}/bin
-#
-# Additional variables used by bsd.buildlink.mk that may be defined in
-# either the package Makefile or in buildlink.mk files:
-#
-# REPLACE_BUILDLINK		space-separated list of files on which we
-#				run ${SED} ${REPLACE_BUILDLINK_SED}
-#
-# REPLACE_BUILDLINK_PATTERNS	space-separated list of shell glob patterns
-#				representing files on which we run ${SED}
-#				${REPLACE_BUILDLINK_SED}
-#
-# REPLACE_BUILDLINK_SED		sed expression used primarily to replace
-#				references to directories in ${BUILDLINK_DIR}
-#				into directories in ${LOCALBASE} and
-#				${X11PREFIX}
-#
-# REPLACE_LIBNAMES		space-separated list of files on which we
-#				run ${SED} ${REPLACE_LIBNAMES_SED}
-#
-# REPLACE_LIBNAMES_PATTERNS	space-separated list of shell glob patterns
-#				representing files on which we run ${SED}
-#				${REPLACE_LIBNAMES_SED}
-#
-# REPLACE_LIBNAMES_SED		sed expression used primarily to replace
-#				references to library names within
-#				${BUILDLINK_DIR} into the true library names
-#				from the base system.
-#
-# BUILDLINK_CONFIG_WRAPPER_SED	sed expression used primarily to replace
-#				references to directories in ${LOCALBASE}
-#				and ${X11PREFIX} into directories in
-#				${BUILDLINK_DIR} or ${BUILDLINK_X11_DIR} in
-#				the buildlink config wrapper scripts
-#
-# The targets required to be defined prior to including this file are
-# listed below.
-#
-# pre-configure			this target should have as dependencies any
-#				targets to be invoked; this is just usually
-#				<pkgname>-buildlink and possibly
-#				<pkgname>-buildlink-config-wrapper
-#
-# <pkgname>-buildlink		this target should just invoke the
-#				_BUILDLINK_USE macro target defined in this
-#				file
-#
-# The targets that may optionally be defined are:
-#
-# <pkgname>-buildlink-config-wrapper
-#				this target should just invoke the
-#				_BUILDLINK_CONFIG_WRAPPER_USE macro target
-#				defined in this file
-#
-# Example package buildlink.mk file:
-#
-# .include "../../mk/bsd.buildlink.mk"
-#
-# BUILDLINK_DEPENDS.foo?=	foo>=1.0
-# DEPENDS+=			${BUILDLINK_DEPENDS.foo}:../../category/foo
-#
-# EVAL_PREFIX+=			BUILDLINK_PREFIX.foo=foo
-# BUILDLINK_FILES.foo=		include/foo.h
-# BUILDLINK_FILES.foo+=		include/bar.h
-# BUILDLINK_FILES.foo+=		lib/libfoo.*
-#
-# # We need the libraries to be called "libbar.*".
-# BUILDLINK_TRANSFORM.foo=	-e "s|libfoo|libbar|g"
-#
-# BUILDLINK_TARGETS+=		foo-buildlink
-#
-# pre-configure: foo-buildlink
-# foo-buildlink: _BUILDLINK_USE
-
-.if !defined(_BSD_BUILDLINK_MK)
-_BSD_BUILDLINK_MK=	# defined
-
-BUILDLINK_DIR=		${WRKDIR}/.buildlink
-
-.include "../../mk/bsd.prefs.mk"
-
-.if !defined(_BUILDLINK_CPPFLAGS) || !defined(_BUILDLINK_LDFLAGS)
-_BUILDLINK_CPPFLAGS=	-I${BUILDLINK_DIR}/include
-_BUILDLINK_LDFLAGS=	-L${BUILDLINK_DIR}/lib
-
-CFLAGS:=		${_BUILDLINK_CPPFLAGS} ${CFLAGS}
-CXXFLAGS:=		${_BUILDLINK_CPPFLAGS} ${CXXFLAGS}
-CPPFLAGS:=		${_BUILDLINK_CPPFLAGS} ${CPPFLAGS}
-LDFLAGS:=		${_BUILDLINK_LDFLAGS} ${LDFLAGS}
-
-CONFIGURE_ENV+=		BUILDLINK_DIR="${BUILDLINK_DIR}"
-CONFIGURE_ENV+=		BUILDLINK_CPPFLAGS="${_BUILDLINK_CPPFLAGS}"
-CONFIGURE_ENV+=		BUILDLINK_LDFLAGS="${_BUILDLINK_LDFLAGS}"
-
-MAKE_ENV+=		BUILDLINK_DIR="${BUILDLINK_DIR}"
-MAKE_ENV+=		BUILDLINK_CPPFLAGS="${_BUILDLINK_CPPFLAGS}"
-MAKE_ENV+=		BUILDLINK_LDFLAGS="${_BUILDLINK_LDFLAGS}"
-.endif
-
-ECHO_BUILDLINK_MSG?=	${ECHO_MSG} "=>"
-
-.if defined(_BUILDLINK_LIBTOOL_ARCHIVES) &&	\
-    (${_BUILDLINK_LIBTOOL_ARCHIVES} == "YES")
-# _LIBTOOL_ARCHIVE_TRANSFORM creates $${dest} from $${file}, where
-# $${file} is a libtool archive (*.la).  It allows libtool to properly
-# interact with buildlink at link time by linking against the libraries
-# pointed to by symlinks in ${BUILDLINK_DIR}.
-#
-_LIBTOOL_ARCHIVE_TRANSFORM_SED=						\
-	-e "s|${LOCALBASE}\(/lib/[^ 	]*\.la\)|${BUILDLINK_DIR}\1|g"	\
-	-e "s|${X11BASE}\(/lib/[^ 	]*\.la\)|${BUILDLINK_DIR}\1|g"
-
-.if defined(USE_BUILDLINK_ONLY)
-_LIBTOOL_ARCHIVE_TRANSFORM_SED+=	${_BUILDLINK_CONFIG_WRAPPER_SED}
-.endif
-
-_LIBTOOL_ARCHIVE_TRANSFORM=						\
-	${SED} ${_LIBTOOL_ARCHIVE_TRANSFORM_SED} $${file} > $${dest}
-.else
-_LIBTOOL_ARCHIVE_TRANSFORM=		${TRUE}
-.endif
-
-_BUILDLINK_USE: .USE
-	${_PKG_SILENT}${_PKG_DEBUG}					\
-	cookie=${BUILDLINK_DIR}/.${.TARGET:S/-buildlink//}_buildlink_done; \
-	if [ ! -f $${cookie} ]; then					\
-		${ECHO_BUILDLINK_MSG} "Linking ${.TARGET:S/-buildlink//} files into ${BUILDLINK_DIR}."; \
-		${MKDIR} ${BUILDLINK_DIR};				\
-		files="${BUILDLINK_FILES.${.TARGET:S/-buildlink//}:S/^/${BUILDLINK_PREFIX.${.TARGET:S/-buildlink//}}\//g}"; \
-		for file in $${files}; do				\
-			rel_file=`${ECHO} $${file} | ${SED} -e "s|${BUILDLINK_PREFIX.${.TARGET:S/-buildlink//}}/||"` ; \
-			if [ -z "${BUILDLINK_TRANSFORM.${.TARGET:S/-buildlink//}:Q}" ]; then \
-				dest=${BUILDLINK_DIR}/$${rel_file};	\
-			else						\
-				dest=`${ECHO} ${BUILDLINK_DIR}/$${rel_file} | ${SED} ${BUILDLINK_TRANSFORM.${.TARGET:S/-buildlink//}}`; \
-			fi;						\
-			if [ -f $${file} ]; then			\
-				dir=`${DIRNAME} $${dest}`;		\
-				if [ ! -d $${dir} ]; then		\
-					${MKDIR} $${dir};		\
-				fi;					\
-				${RM} -f $${dest};			\
-				case $${file} in			\
-				*.la)					\
-					${_LIBTOOL_ARCHIVE_TRANSFORM};	\
-					;;				\
-				*)					\
-					${LN} -sf $${file} $${dest};	\
-					;;				\
-				esac;					\
-				if [ -z "${BUILDLINK_TRANSFORM.${.TARGET:S/-buildlink//}:Q}" ]; then \
-					${ECHO} $${file} >> $${cookie};	\
-				else					\
-					${ECHO} "$${file} -> $${dest}" >> $${cookie}; \
-				fi;					\
-			else						\
-				${ECHO} "$${file}: not found" >> $${cookie}; \
-			fi;						\
-		done;							\
-		${TOUCH} ${TOUCH_FLAGS} $${cookie};			\
-	fi
-
-# If a package uses only buildlink.mk files, then automatically set
-# USE_CONFIG_WRAPPER to use config script wrappers for packages that
-# have them.
-#
-.if defined(USE_BUILDLINK_ONLY)
-USE_CONFIG_WRAPPER=	# defined
-.endif
-
-# If we are using the config script wrappers, we prepend their location
-# to the PATH so we don't have to fix so many broken configure scripts
-# and Makefiles that expect to find the *-config scripts in the PATH.
-#
-.if defined(USE_CONFIG_WRAPPER)
-PATH:=			${BUILDLINK_DIR}/bin:${PATH}
-.endif
-
-BUILDLINK_CONFIG_WRAPPER_SED?=		# empty
-_BUILDLINK_CONFIG_WRAPPER_POST_SED+=					\
-	-e "s|-I${LOCALBASE}/|-I${BUILDLINK_DIR}/|g"			\
-	-e "s|-L${LOCALBASE}/|-L${BUILDLINK_DIR}/|g"
-_BUILDLINK_CONFIG_WRAPPER_SED=						\
-	${_BUILDLINK_CONFIG_WRAPPER_PRE_SED}				\
-	${BUILDLINK_CONFIG_WRAPPER_SED}					\
-	${_BUILDLINK_CONFIG_WRAPPER_POST_SED}
-
-_BUILDLINK_CONFIG_WRAPPER_USE: .USE
-	${_PKG_SILENT}${_PKG_DEBUG}					\
-	cookie=${BUILDLINK_DIR}/.${.TARGET:S/-buildlink-config-wrapper//}_buildlink_config_wrapper_done; \
-	if [ ! -f $${cookie} ]; then					\
-		${ECHO_BUILDLINK_MSG} "Creating wrapper script ${BUILDLINK_CONFIG_WRAPPER.${.TARGET:S/-buildlink-config-wrapper//}}."; \
-		${MKDIR} ${BUILDLINK_CONFIG_WRAPPER.${.TARGET:S/-buildlink-config-wrapper//}:H}; \
-		(${ECHO} '#!/bin/sh';					\
-		${ECHO} '';						\
-		${ECHO} 'output=`${BUILDLINK_CONFIG.${.TARGET:S/-buildlink-config-wrapper//}} $$*`'; \
-		${ECHO} 'exitcode=$$?';					\
-		${ECHO} '${ECHO} "$${output}" | ${SED} \';		\
-		${ECHO} '	${_BUILDLINK_CONFIG_WRAPPER_SED}';	\
-		${ECHO} 'exit $${exitcode}';				\
-		) > ${BUILDLINK_CONFIG_WRAPPER.${.TARGET:S/-buildlink-config-wrapper//}}; \
-		${CHMOD} +x ${BUILDLINK_CONFIG_WRAPPER.${.TARGET:S/-buildlink-config-wrapper//}}; \
-		${ECHO} ${BUILDLINK_CONFIG.${.TARGET:S/-buildlink-config-wrapper//}} >> $${cookie}; \
-	fi
-
-_CHECK_IS_TEXT_FILE=	${FILE_CMD} $${file} | ${EGREP} "(shell script|text)" >/dev/null 2>&1
-
-# _BUILDLINK_SUBST_USE is a make macro that executes code to do general text
-# replacement in files.  The following variables are used:
-#
-# BUILDLINK_SUBST_MESSAGE.<package>	message to display, noting what is
-#					being substituted
-#					
-# BUILDLINK_SUBST_FILES.<package>	files on which to run the substitution
-#
-# BUILDLINK_SUBST_SED.<package>		sed(1) substitution expression to run
-#					on the specified files.
-#
-# The _BUILDLINK_SUBST_USE macro code will try to verify that a file is a text
-# file before attempting any substitutions.
-#
-_BUILDLINK_SUBST_USE: .USE
-	${_PKG_SILENT}${_PKG_DEBUG}					\
-	cookie=${BUILDLINK_DIR}/.${.TARGET:S/-buildlink-subst//:S/-/_/g}_buildlink_subst_done; \
-	if [ ! -f $${cookie} ]; then					\
-		${MKDIR} ${BUILDLINK_DIR};				\
-		files="${BUILDLINK_SUBST_FILES.${.TARGET:S/-buildlink-subst//}}"; \
-		if [ -n "$${files}" -a -n "${BUILDLINK_SUBST_SED.${.TARGET:S/-buildlink-subst//}:Q}" ]; then \
-			${ECHO_BUILDLINK_MSG} ${BUILDLINK_SUBST_MESSAGE.${.TARGET:S/-buildlink-subst//}}; \
-			cd ${WRKSRC};					\
-			for file in $${files}; do			\
-				if ${_CHECK_IS_TEXT_FILE}; then		\
-					${SED}	${BUILDLINK_SUBST_SED.${.TARGET:S/-buildlink-subst//}} \
-						$${file} > $${file}.fixed; \
-					if [ -x $${file} ]; then	\
-						${CHMOD} +x $${file}.fixed; \
-					fi;				\
-					${MV} -f $${file}.fixed $${file}; \
-					${ECHO} $${file} >> $${cookie};	\
-				fi;					\
-			done;						\
-		fi;							\
-	fi
-
-MAKEFILE_PATTERNS+=	${MAKEFILE:T}
-MAKEFILE_PATTERNS+=	Makefile
-MAKEFILE_PATTERNS+=	Makeconf
-MAKEFILE_PATTERNS+=	*.mk
-
-CONFIGURE_PATTERNS+=	${CONFIGURE_SCRIPT:T}
-CONFIGURE_PATTERNS+=	configure
-CONFIGURE_PATTERNS+=	configure.gnu
-CONFIGURE_PATTERNS+=	Configure
-
-.if (${OBJECT_FMT} == "a.out") || defined(BUILDLINK_AOUT_DEBUG)
-REPLACE_LIBNAME_PATTERNS+=	${MAKEFILE_PATTERNS}
-_REPLACE_LIBNAME_PATTERNS_FIND=	\
-	\( ${REPLACE_LIBNAME_PATTERNS:S/$/!/:S/^/-o -name !/:S/!/"/g:S/-o//1} \)
-_REPLACE_LIBNAME_CONFIGURE_PATTERNS_FIND=	\
-	\( ${CONFIGURE_PATTERNS:S/$/!/:S/^/-o -name !/:S/!/"/g:S/-o//1} \)
-
-REPLACE_LIBNAMES_CONFIGURE+=	\
-	`cd ${WRKSRC}; ${FIND} . ${_REPLACE_LIBNAME_CONFIGURE_PATTERNS_FIND} -print | ${SED} -e 's|^\./||' | ${SORT}`
-
-REPLACE_LIBNAMES+=	\
-	`cd ${WRKSRC}; ${FIND} . ${_REPLACE_LIBNAME_PATTERNS_FIND} -print | ${SED} -e 's|^\./||' | ${SORT}`
-
-.if defined(HAS_CONFIGURE) || defined(GNU_CONFIGURE)
-_CONFIGURE_PREREQ+=	libnames-configure-buildlink-subst
-
-# Fix linking on a.out platforms in configure scripts and in Makefiles by
-# changing library references to the true library names.
-#
-BUILDLINK_SUBST_MESSAGE.libnames-configure=	\
-	"Fixing library name references in configure scripts."
-BUILDLINK_SUBST_FILES.libnames-configure=	${REPLACE_LIBNAMES_CONFIGURE}
-BUILDLINK_SUBST_SED.libnames-configure=		${REPLACE_LIBNAMES_SED}
-
-libnames-configure-buildlink-subst: _BUILDLINK_SUBST_USE
-.endif
-
-_CONFIGURE_POSTREQ+=	libnames-makefiles-buildlink-subst
-
-# Fix linking on a.out platforms by changing library references in Makefiles
-# to the true library names.
-#
-BUILDLINK_SUBST_MESSAGE.libnames-makefiles=	\
-	"Fixing library name references in Makefiles."
-BUILDLINK_SUBST_FILES.libnames-makefiles=	${REPLACE_LIBNAMES}
-BUILDLINK_SUBST_SED.libnames-makefiles=		${REPLACE_LIBNAMES_SED}
-
-libnames-makefiles-buildlink-subst: _BUILDLINK_SUBST_USE
-
-.endif	# a.out || BUILDLINK_AOUT_DEBUG
-
-REPLACE_RPATH_PATTERNS+=	${MAKEFILE_PATTERNS}
-_REPLACE_RPATH_PATTERNS_FIND=	\
-	\( ${REPLACE_RPATH_PATTERNS:S/$/!/:S/^/-o -name !/:S/!/"/g:S/-o//1} \)
-
-REPLACE_RPATH+=	\
-	`cd ${WRKSRC}; ${FIND} . ${_REPLACE_RPATH_PATTERNS_FIND} -print | ${SED} -e 's|^\./||' | ${SORT}`
-
-.if ${OPSYS} == "IRIX"
-REPLACE_RPATH_SED+=	\
-	-e "s|-R[ 	]*${BUILDLINK_DIR}/|-rpath -Wl,${LOCALBASE}/|g"
-.else
-REPLACE_RPATH_SED+=	\
-	-e "s|-R[ 	]*${BUILDLINK_DIR}/|-R${LOCALBASE}/|g"
-.endif
-
-.if defined(_USE_RPATH) && (${_USE_RPATH} == "yes")
-_CONFIGURE_POSTREQ+=	rpath-buildlink-subst
-.endif
-
-BUILDLINK_SUBST_MESSAGE.rpath=  \
-	"Removing rpath references to buildlink directories."
-BUILDLINK_SUBST_FILES.rpath=    ${REPLACE_RPATH}
-BUILDLINK_SUBST_SED.rpath=      ${REPLACE_RPATH_SED}
-
-rpath-buildlink-subst: _BUILDLINK_SUBST_USE
-
-# Fix files by removing buildlink directory references and library names.
-#
-REPLACE_BUILDLINK_PATTERNS+=	*.lai
-REPLACE_BUILDLINK_PATTERNS+=	*-config
-REPLACE_BUILDLINK_PATTERNS+=	*Conf.sh
-REPLACE_BUILDLINK_PATTERNS+=	*.pc
-_REPLACE_BUILDLINK_PATTERNS_FIND=	\
-	\( ${REPLACE_BUILDLINK_PATTERNS:S/$/!/:S/^/-o -name !/:S/!/"/g:S/-o//1} \)
-
-REPLACE_BUILDLINK+=	\
-	`cd ${WRKSRC}; ${FIND} . ${_REPLACE_BUILDLINK_PATTERNS_FIND} -print | ${SED} -e 's|^\./||' | ${SORT}`
-
-post-build: unbuildlink-buildlink-subst
-
-REPLACE_BUILDLINK_SED?=		# empty
-_REPLACE_BUILDLINK_POST_SED+=						\
-	-e "s|-I${BUILDLINK_DIR}/|-I${LOCALBASE}/|g"			\
-	-e "s|-L${BUILDLINK_DIR}/|-L${LOCALBASE}/|g"
-_REPLACE_BUILDLINK_SED=							\
-	${_REPLACE_BUILDLINK_PRE_SED}					\
-	${REPLACE_BUILDLINK_SED}					\
-	${_REPLACE_BUILDLINK_POST_SED}
-
-BUILDLINK_SUBST_MESSAGE.unbuildlink=	\
-	"Fixing directory and library names in files-to-be-installed."
-BUILDLINK_SUBST_FILES.unbuildlink=	${REPLACE_BUILDLINK}
-BUILDLINK_SUBST_SED.unbuildlink=	${_REPLACE_BUILDLINK_SED}	\
-					${REPLACE_LIBNAMES_SED}		\
-					${REPLACE_RPATH_SED}
-
-unbuildlink-buildlink-subst: _BUILDLINK_SUBST_USE
-
-.endif	# _BSD_BUILDLINK_MK