diff options
Diffstat (limited to 'lang/perl5/Makefile')
-rw-r--r-- | lang/perl5/Makefile | 231 |
1 files changed, 143 insertions, 88 deletions
diff --git a/lang/perl5/Makefile b/lang/perl5/Makefile index 78cab3a83cc..58f1d9e33ff 100644 --- a/lang/perl5/Makefile +++ b/lang/perl5/Makefile @@ -1,4 +1,4 @@ -# $NetBSD: Makefile,v 1.96 2005/07/13 15:20:29 jschauma Exp $ +# $NetBSD: Makefile,v 1.97 2005/08/06 06:18:45 jlam Exp $ # The following two variables should have empty values unless we're # building a perl snapshot or release candidate. @@ -6,14 +6,15 @@ PERL5_SNAPSHOT= # empty PERL5_RC_VERS= # empty -PERL5_VERS= 5.8.6 +PERL5_VERS= 5.8.7 CATEGORIES= lang devel perl5 EXTRACT_SUFX= .tar.bz2 +WRKSRC= ${WRKDIR}/${DISTNAME} .if empty(PERL5_SNAPSHOT) && empty(PERL5_RC_VERS) DISTNAME= perl-${PERL5_VERS} PKGNAME= perl-${PERL5_VERS} -PKGREVISION= 6 +PKGREVISION= # empty MASTER_SITES= ${MASTER_SITE_PERL_CPAN:S,/modules/by-module/$,/src/,} .else . if !empty(PERL5_SNAPSHOT) @@ -35,25 +36,51 @@ MAINTAINER= jlam@NetBSD.org HOMEPAGE= http://www.perl.com/ COMMENT= Practical Extraction and Report Language -CONFLICTS= perl-5.00* perl-base-[0-9]* \ - p5-CGI-2.66 p5-CGI-2.75 p5-CGI-2.75.[0-2] \ - p5-Data-Dumper-2.1[0-9][0-9] p5-Data-Dumper-[0-9][0-9] \ - p5-Devel-DProf-[0-9]* p5-Devel-Peek-[0-9]* \ - perl-mk-[0-9]* perl-thread-[0-9]* +CONFLICTS= perl-base-[0-9]* perl-thread-[0-9]* \ + p5-CGI-2.66 p5-CGI-2.75 p5-CGI-2.75.[0-2] -PKG_INSTALLATION_TYPES= overwrite pkgviews +.include "../../mk/bsd.prefs.mk" + +# Determine the Perl API version from the patchlevel.h file from the +# source distribution. +# +PERL5_API_VERS?= unknown +.if exists(${WRKSRC}/patchlevel.h) +PERL5_API_VERS_cmd= \ + ${AWK} '/\#define[ ]*PERL_API_REVISION/ { R = $$3 } \ + /\#define[ ]*PERL_API_VERSION/ { r = "."$$3 } \ + /\#define[ ]*PERL_API_SUBVERSION/ { s = "."$$3 } \ + END { printf "%s%s%s\n", R, r, s }' \ + ${WRKSRC}/patchlevel.h +PERL5_API_VERS= ${PERL5_API_VERS_cmd:sh} +.endif + +PERL5_PREFIX= ${PREFIX} +PERL5_VENDORPREFIX= ${PERL5_PERLBASE}/vendor_perl +PERL5_SITEPREFIX?= ${PERL5_PERLBASE}/site_perl +BUILD_DEFS+= PERL5_SITEPREFIX + +PERL5= ${PERL5_PREFIX}/bin/perl +PERL5_PERLBASE= ${PERL5_PREFIX}/lib/perl5 +PERL5_VENDORBASE= ${PERL5_VENDORPREFIX} +PERL5_SITEBASE= ${PERL5_SITEPREFIX} + +PERL5_PRIVLIB= ${PERL5_PERLBASE}/${PERL5_API_VERS} +PERL5_VENDORLIB= ${PERL5_VENDORBASE}/${PERL5_API_VERS} +.if !empty(PERL5_SITEBASE:M*lib/perl5/site_perl) +PERL5_SITELIB= ${PERL5_SITEBASE}/${PERL5_API_VERS} +.else +PERL5_SITELIB= ${PERL5_SITEBASE}/lib/perl5/site_perl/${PERL5_API_VERS} +.endif .include "../../mk/compiler.mk" HAS_CONFIGURE= yes CONFIGURE_SCRIPT= ./Configure CONFIGURE_ARGS+= -sde -CONFIGURE_ARGS+= -Dprefix="${PREFIX}" -CONFIGURE_ARGS+= -Dscriptdir="${PREFIX}/bin" CONFIGURE_ARGS+= -Darchname="${MACHINE_ARCH}-${LOWER_OPSYS}" -CONFIGURE_ARGS+= -Dcc="${CC}" -CONFIGURE_ARGS+= -Doptimize="${CFLAGS}" -CONFIGURE_ARGS+= -Dinstallstyle="lib/perl5" +CONFIGURE_ARGS+= -Dcc=${CC:Q} +CONFIGURE_ARGS+= -Doptimize=${CFLAGS:Q} CONFIGURE_ARGS+= -Duseshrplib CONFIGURE_ARGS+= -Ui_malloc CONFIGURE_ARGS+= -Uusemymalloc @@ -62,31 +89,43 @@ MAKE_ENV+= LC_ALL="C" TEST_TARGET= test -# Install Perl man3 pages into a private directory under the normal -# Perl installation. Also install site-specific Perl man3 pages into a -# private directory within site_perl. This avoids manpage conflicts -# between 3rd-party modules, the standard Perl library, and other -# packages. -# -CONFIGURE_ARGS+= -Dman3ext="3" -CONFIGURE_ARGS+= -Dman3dir="${PERL5_PRIVLIB}/man/man3" -CONFIGURE_ARGS+= -Dsiteman3dir="${PERL5_SITEPERL}/man/man3" +### +### Installation directories for "perl", "vendor" and "site" bits. +### +CONFIGURE_ARGS+= -Dinstallstyle="lib/perl5" +CONFIGURE_ARGS+= -Dprefix=${PERL5_PREFIX:Q} +CONFIGURE_ARGS+= -Dsiteprefix=${PERL5_SITEPREFIX:Q} +CONFIGURE_ARGS+= -Dvendorprefix=${PERL5_VENDORPREFIX:Q} -# Ensure that the Perl man1 pages go into ${PREFIX}/man/man1 and not -# into some other platform-specific location kindly "guessed" by the -# Configure script. +# The Perl Configure script will install scripts into "*/script" +# directories if they exist, so override with explicit settings. # -CONFIGURE_ARGS+= -Dman1dir="${PREFIX}/man/man1" +CONFIGURE_ARGS+= -Dscriptdir=${PERL5_PERLBASE:Q}/bin +CONFIGURE_ARGS+= -Dsitescript=${PERL5_SITEBASE:Q}/bin +CONFIGURE_ARGS+= -Dvendorscript=${PERL5_VENDORBASE:Q}/bin -# The site directories are all relative to the perl view. -CONFIGURE_ARGS+= -Dsiteprefix="${VIEWBASE}" -CONFIGURE_ARGS+= -Dsiteman1dir="${VIEWBASE}/man/man1" +# Put the API-specific files into API-specific directories instead +# of the default version-specific directories. +# +CONFIGURE_ARGS+= -Dprivlib=${PERL5_PRIVLIB:Q} +CONFIGURE_ARGS+= -Dsitelib=${PERL5_SITELIB:Q} +CONFIGURE_ARGS+= -Dvendorlib=${PERL5_VENDORLIB:Q} -.include "../../mk/bsd.prefs.mk" +# Avoid manpage conflicts between the standard Perl library, 3rd-party +# modules, and other packages. +# +CONFIGURE_ARGS+= -Dman1ext="1" +CONFIGURE_ARGS+= -Dman1dir=${PERL5_PERLBASE:Q}/man/man1 +CONFIGURE_ARGS+= -Dsiteman1dir=${PERL5_SITEBASE:Q}/man/man1 +CONFIGURE_ARGS+= -Dvendorman1dir=${PERL5_VENDORBASE:Q}/man/man1 +CONFIGURE_ARGS+= -Dman3ext="3" +CONFIGURE_ARGS+= -Dman3dir=${PERL5_PERLBASE:Q}/man/man3 +CONFIGURE_ARGS+= -Dsiteman3dir=${PERL5_SITEBASE:Q}/man/man3 +CONFIGURE_ARGS+= -Dvendorman3dir=${PERL5_VENDORBASE:Q}/man/man3 .if ${OPSYS} == "Darwin" # -# The perl build attempts to work around case-insensitivity problems on +# The Perl build attempts to work around case-insensitivity problems on # HFS filesystems by using GNUmakefiles, so we need to use GNU make. # USE_TOOLS+= gmake @@ -157,9 +196,9 @@ CHECK_BUILTIN.pthread:= no # By default, build with threads only if the threads are native. .if !empty(USE_BUILTIN.pthread:M[yY][eE][sS]) -PERL5_USE_THREADS?= yes +PERL5_BUILD_THREADS_SUPPORT= yes .else -PERL5_USE_THREADS?= ${DLOPEN_REQUIRE_PTHREADS} +PERL5_BUILD_THREADS_SUPPORT= ${DLOPEN_REQUIRE_PTHREADS} .endif ### [Sat Dec 18 17:29:44 EST 2004 : jlam] @@ -167,56 +206,61 @@ PERL5_USE_THREADS?= ${DLOPEN_REQUIRE_PTHREADS} ### Build Perl without threads-support until VAX native threads are ### known to work. ### -.if !empty(MACHINE_PLATFORM:MNetBSD-*-vax) -PKG_HACKS+= broken-vax-pthreads -PERL5_USE_THREADS= no +.if !empty(MACHINE_PLATFORM:MNetBSD-*-vax) && \ + !empty(USE_BUILTIN.pthread:M[yY][eE][sS]) +PKG_HACKS+= broken-vax-pthreads +PERL5_BUILD_THREADS_SUPPORT= no .endif -.if !empty(PERL5_USE_THREADS:M[nN][oO]) -CONFIGURE_ARGS+= -Uuseithreads -.else +PKG_OPTIONS_VAR= PKG_OPTIONS.perl +PKG_SUPPORTED_OPTIONS= threads +.if !empty(PERL5_BUILD_THREADS_SUPPORT:M[yY][eE][sS]) +PKG_SUGGESTED_OPTIONS= threads +.endif +PKG_OPTIONS_LEGACY_VARS+= PERL5_USE_THREADS:threads + +.include "../../mk/bsd.options.mk" + +.if !empty(PKG_OPTIONS:Mthreads) . include "../../mk/pthread.buildlink3.mk" CONFIGURE_ARGS+= -Duseithreads CFLAGS+= ${PTHREAD_CFLAGS} PERL5_HINTS_LDFLAGS+= ${PTHREAD_LDFLAGS} PERL5_HINTS_LDDLFLAGS+= ${PTHREAD_LDFLAGS} LIBSWANTED+= ${PTHREAD_LIBS:M-l*:S/^-l//} +.else +CONFIGURE_ARGS+= -Uuseithreads .endif .if !empty(LIBSWANTED) -CONFIGURE_ARGS+= -Dlibswanted="${LIBSWANTED}" +CONFIGURE_ARGS+= -Dlibswanted=${LIBSWANTED:Q} .endif .include "../../mk/compiler.mk" .if ${OPSYS} == "IRIX" . if ${ABI} == "64" -CONFIGURE_ARGS+= -Dcc='${CC} -64' -Duse64bitint +CONFIGURE_ARGS+= -Dcc=${CC:Q}" -64" -Duse64bitint . else -CONFIGURE_ARGS+= -Dcc='${CC} -n32' +CONFIGURE_ARGS+= -Dcc=${CC:Q}" -n32" . endif .endif -PERL5= ${PREFIX}/bin/perl${PERL5_VERS} -PERL5_PRIVLIB= ${PREFIX}/lib/perl5/${PERL5_VERS} -PERL5_SITEPERL= ${VIEWBASE}/lib/perl5/site_perl -PERL5_SITELIB= ${VIEWBASE}/lib/perl5/site_perl/${PERL5_VERS} -PLIST_SUBST+= PERL5_SITEPERL=${PERL5_SITEPERL:S/^${PREFIX}\///} -PLIST_SUBST+= PERL5_SITELIB=${PERL5_SITELIB:S/^${PREFIX}\///} -MESSAGE_SUBST+= PERL5_SITELIB=${PERL5_SITELIB} - -# Some platforms may want the directory mode not to be 0755. This is, -# unfortunately, hardcoded in quite a few places in Perl. So let's substitute -# what pkgsrc said instead. -post-patch: -.if ${PKGDIRMODE} != "755" -. for f in installhtml installman installperl lib/ExtUtils/Install.pm - cd ${WRKSRC} && \ - ${MV} -f ${f} ${f}.dirmode && \ - ${SED} -e 's/755/${PKGDIRMODE}/g;/umask(/d' \ - ${f}.dirmode >${f} -. endfor -.endif +# Some platforms may want the directory mode not to be 0755. This +# is, unfortunately, hardcoded in quite a few places in Perl, so +# let's substitute what pkgsrc says instead. +# +SUBST_CLASSES+= dirmode +SUBST_STAGE.dirmode= post-patch +SUBST_FILES.dirmode= installhtml installman installperl \ + lib/ExtUtils/Install.pm +SUBST_SED.dirmode= -e "s/755/${PKGDIRMODE}/g;/umask(/d" + +USE_PKGINSTALL= yes +INSTALL_EXTRA_TMPL+= ${FILESDIR}/install_link.tmpl +DEINSTALL_EXTRA_TMPL+= ${FILESDIR}/deinstall_link.tmpl +FILES_SUBST+= PERL5_PACKLIST= +FILES_SUBST+= PERL5_COMMENT=\# # It's tough to guess which hints file will be used, so add our modifications # to all of them: @@ -228,63 +272,74 @@ pre-configure: hintdir="${WRKSRC}/hints"; \ for hints in $${hintdir}/*.sh; do \ ${CHMOD} +w $${hints}; \ - ( ${ECHO} ""; \ + { ${ECHO} ""; \ ${ECHO} "cat > UU/pkgsrc.cbu <<'EOCBU'"; \ ${ECHO} "# This script UU/pkgsrc.cbu will get 'called-back' by Configure to set"; \ ${ECHO} '# linker options after all other call-back scripts have been invoked.'; \ ${ECHO} 'ldflags="${PERL5_HINTS_LDFLAGS} $$ldflags"'; \ ${ECHO} 'lddlflags="${PERL5_HINTS_LDFLAGS} $$lddlflags"'; \ ${ECHO} "EOCBU"; \ - ) >> $${hints}; \ + } >> $${hints}; \ done hintdir="${WRKSRC}/hints"; \ for hints in $${hintdir}/*.sh; do \ - ( ${ECHO} ""; \ + { ${ECHO} ""; \ ${ECHO} "# Set pkgsrc defaults for library and header search paths."; \ ${ECHO} 'locincpth="${LOCINCPATH}"'; \ ${ECHO} 'loclibpth="${LOCLIBPATH}"'; \ - ) >> $${hints}; \ + } >> $${hints}; \ done .if !empty(SYSLIBPATH) hintdir="${WRKSRC}/hints"; \ for hints in $${hintdir}/*.sh; do \ - ( ${ECHO} "glibpth='${SYSLIBPATH}'"; \ - ) >> $${hints}; \ + { ${ECHO} "glibpth='${SYSLIBPATH}'"; } >> $${hints}; \ done .endif -WRKSRC_PERL5= ${WRKSRC}/perl PLIST_SRC= ${WRKDIR}/.PLIST_SRC PLIST_FILE_SED= -e "s,[ ].*,," -e "s,/\./,/,g" -e "s,${PREFIX}/,," PLIST_DIR_SED= ${PLIST_FILE_SED} \ -e "s,^,@unexec \${RMDIR} -p %D/," \ -e "s,/[^/]*$$, 2>/dev/null || ${TRUE}," \ +INSTALLATION_DIRS= bin man/man1 + +post-build: + @${SED} ${FILES_SUBST_SED} ${FILESDIR}/perllink.in \ + > ${WRKDIR}/perllink + post-install: - ${RM} -f ${PREFIX}/bin/perl ${PREFIX}/bin/perl${PERL5_VERS} - ${INSTALL_PROGRAM_DIR} ${PREFIX}/bin - ${INSTALL_PROGRAM} ${WRKSRC_PERL5} ${PREFIX}/bin/perl${PERL5_VERS} - ${LN} -f ${PREFIX}/bin/perl${PERL5_VERS} ${PREFIX}/bin/perl -.if defined(_STRIPFLAG_INSTALL) && !empty(_STRIPFLAG_INSTALL) - if [ -x ${PREFIX}/bin/a2p ]; then \ + if ${TEST} -x ${PREFIX}/bin/a2p; then \ strip ${PREFIX}/bin/a2p; \ fi -.endif - # Generate the PLIST template eval `${PERL5} -V:installarchlib 2>/dev/null`; \ eval `${PERL5} -V:installsitearch 2>/dev/null`; \ - sitearch=`${ECHO} $$installsitearch | ${SED} ${PLIST_FILE_SED}`; \ - ${RMDIR} -p $$installsitearch 2>/dev/null || ${TRUE}; \ + eval `${PERL5} -V:installvendorarch 2>/dev/null`; \ + case $$installsitearch in \ + ${PREFIX}/*) \ + ${RMDIR} -p $$installsitearch 2>/dev/null || ${TRUE}; \ + ;; \ + esac; \ + ${RMDIR} -p $$installvendorarch 2>/dev/null || ${TRUE}; \ + eval `${PERL5} -V:scriptdir 2>/dev/null`; \ + eval `${PERL5} -V:man1dir 2>/dev/null`; \ + ${INSTALL_SCRIPT} ${WRKDIR}/perllink $$scriptdir/perllink; \ + ${INSTALL_MAN} ${FILESDIR}/perllink.1 $$man1dir/perllink.1; \ + ${RM} -f ${PREFIX}/bin/perllink ${PREFIX}/man/man1/perllink.1; \ + ${LN} -s $$scriptdir/perllink ${PREFIX}/bin/perllink; \ + ${LN} -s $$man1dir/perllink.1 ${PREFIX}/man/man1/perllink.1; \ packlist="$$installarchlib/.packlist"; \ - ( ${ECHO} "@unexec ${RM} -f %D/$$sitearch/perllocal.pod"; \ - ${ECHO} "@unexec ${RMDIR} -p %D/$$sitearch 2>/dev/null || ${TRUE}"; \ - ${CAT} ${PKGDIR}/PLIST; \ + { ${CAT} ${PKGDIR}/PLIST; \ ${ECHO} "@comment The following lines are automatically generated"; \ ${ECHO} "@comment from the installed .packlist files."; \ - ) > ${PLIST_SRC}; \ - ( ${ECHO} "$$packlist" && ${CAT} $$packlist ) \ - | ${SED} ${PLIST_FILE_SED} | ${SORT} -u >> ${PLIST_SRC}; \ - ( ${ECHO} "$$packlist" && ${CAT} $$packlist ) \ - | ${SED} ${PLIST_DIR_SED} | ${SORT} -ur >> ${PLIST_SRC} + { ${ECHO} "$$packlist"; ${CAT} $$packlist; \ + ${ECHO} "$$scriptdir/perllink"; \ + ${ECHO} "$$man1dir/perllink.1"; \ + } | ${SED} ${PLIST_FILE_SED} | ${SORT} -u; \ + { ${ECHO} "$$packlist"; ${CAT} $$packlist; \ + ${ECHO} "$$scriptdir/perllink"; \ + ${ECHO} "$$man1dir/perllink.1"; \ + } | ${SED} ${PLIST_DIR_SED} | ${SORT} -ur; \ + } > ${PLIST_SRC} .include "../../mk/bsd.pkg.mk" |