diff options
Diffstat (limited to 'mk/defaults')
| -rw-r--r-- | mk/defaults/mk.conf | 2445 | ||||
| -rw-r--r-- | mk/defaults/obsolete.mk | 51 | ||||
| -rw-r--r-- | mk/defaults/options.description | 242 |
3 files changed, 0 insertions, 2738 deletions
diff --git a/mk/defaults/mk.conf b/mk/defaults/mk.conf deleted file mode 100644 index 6163d502a8e..00000000000 --- a/mk/defaults/mk.conf +++ /dev/null @@ -1,2445 +0,0 @@ -# $NetBSD: mk.conf,v 1.14.2.10 2005/05/17 18:29:45 tv Exp $ -# - -# A file providing defaults for pkgsrc and the packages collection. -# See the NetBSD mk.conf(5) and packages(7) manual page for a full -# description of all available options. -# - -# ************************************************************************ -# NOTE TO PEOPLE EDITING THIS FILE - USE LEADING SPACES, NOT LEADING TABS. -# ************************************************************************ - -#ALLOW_VULNERABLE_PACKAGES= -# allow the user to build packages which are known to be vulnerable to -# security exploits -# Possible: defined, not defined -# Default: not defined - -MANINSTALL?= maninstall catinstall -# Specify manpage installation types. -# Possible: maninstall, catinstall, both types or empty -# Default: maninstall catinstall - -#MANZ= -# gzip manual pages at installation time -# Possible: defined, not defined -# Default: not defined - -GZIP?= -9 -# default compression level when compressing files with gzip -# Possible: -[0-9], --fast, --best (see gzip(1)) -# Default: -9 - -#MKCRYPTO= no -# If not YES or yes, don't fetch, build or install crypto packages. -# Possible: not defined, no -# Default: yes - -#OBJHOSTNAME= -# use hostname-specific object directories, e.g. work.amnesiac, work.localhost -# OBJHOSTNAME takes precedence over OBJMACHINE (see below). -# Possible: defined, not defined -# Default: not defined - -#OBJMACHINE= -# use machine-specific object directories, e.g. work.i386, work.sparc -# Possible: defined, not defined -# Default: not defined - -#PKG_SUFX= .tbz -# Create binary packages with bzip2(1) or gzip(1). -# Possible: .tbz, .tgz -# Default: .tgz - -PKGSRC_LOCKTYPE?= none -# The type of locking which will be done if competing processes attempt to -# do work on one package directory simultaneously. -# + Locking requires that OBJHOSTNAME is set. -# + Locking may require the pkgsrc/pkgtools/shlock package to be installed -# on certain OS types. -# + Sleep locking means that the process will sleep for ${PKGSRC_SLEEPSECS} -# seconds, then try to acquire the lock, and sleeping again if it's not -# available. -# + Once locking will try once to acquire the lock, and then fail. -# Possible: none, sleep, once -# Default: none - -PKGSRC_SLEEPSECS?= 5 -# The number of seconds to wait when PKGSRC_LOCKTYPE is sleep -# Possible: a positive integer -# Default: 5 - -#USETBL= -# Run raw manual pages through tbl(1) before piping through troff(1) -# when formatting manual pages. -# Possible: defined, not defined -# Default: not defined - - -# -# The following values are used to manage the packages collection as a whole. -# - -#ABI= -# The ABI to be used, if supported by the Operating System and/or compiler. -# Currently only used under IRIX and explicitly set during bootstrapping -# Only change this if you really know what you're doing -- libraries of -# one ABI can not be linked with libraries of another! -# Possible: 64 (64 bit ABI), 32 (SGI's N32 ABI), undefined (SGI's old o32 ABI) -# Default: determined during bootstrapping - -#PKG_DEVELOPER= yes -# Run a sanity check that package developers want: -# * run check-shlibs to see that all binaries will find their libs -# Possible: defined, not defined -# Default: not defined - -IGNORE_RECOMMENDED?= no -# Ignore package prerequisite recommendations. If this is set to -# "no", all entries in RECOMMENDED will be added to DEPENDS. -# If set to "yes", a warning will be printed if recommendations -# are possibly ignored. -# -# WARNING: This should only be set if you know what you're doing. -# Please read pkgsrc/doc/pkgsrc.txt for details. -# -# Possible: yes, no -# Default: no - -#PKG_REGISTER_SHELLS= YES -# Automatically register shells in /etc/shells -# Possible: YES, NO -# Default: YES - -PKGSRC_COMPILER?= gcc -# Compiler type(s) to use for building packages -# Possible: (see comments in mk/compiler.mk) -# Default: "gcc" - -PKGSRC_MESSAGE_RECIPIENTS?= -# login names of recipients of any MESSAGE files which will be mailed -# Possible: any login names -# Default: none - -PKGSRC_SHOW_BUILD_DEFS?=yes -# Show BUILD_DEFS definitions for a package when it is being built -# (BUILD_DEFS are extra definitions which govern how some packages are -# built and behave) -# Possible: "yes", not "yes" -# Default: "yes" - -.if defined(PKG_DEVELOPER) -PKGSRC_SHOW_PATCH_ERRORMSG?=no -.else -PKGSRC_SHOW_PATCH_ERRORMSG?=yes -.endif -# Print a potentially helpful error message when the "patch" stage fails -# Possible: "yes", not "yes" -# Default: "no" if PKG_DEVELOPER is defined, "yes" otherwise - -PKGSRC_RUN_TEST?= no -# Run test target before install -# Possible: yes, no -# Default: no - -PREFER_PKGSRC?= MesaLib Xft2 Xrandr Xrender expat fontconfig \ - freetype2 glu randrext render xcursor -PREFER_NATIVE?= yes -# -# When building packages, whether to prefer the pkgsrc or native -# versions of software that's also part of the base system. Its value -# can be either yes/no, or a list of packages as named in the -# BUILDLINK_PACKAGES line in a package's buildlink[23].mk file. -# Preferences are determined by the most specific instance of the -# package in either PREFER_PKGSRC or PREFER_NATIVE. If a package is -# specified in neither or in both variables, then PREFER_PKGSRC has -# precedence over PREFER_NATIVE. -# -# Possible: yes, no, or a list of packages - -PREFER_NATIVE_PTHREADS?= yes -# This toggles whether we prefer using the native pthreads implementation -# or the pkgsrc OPR (see pthread.buildlink3.mk). This setting is -# independent of the PREFER_* variables named above. - -#WRKOBJDIR= /usr/tmp -# build here instead of in pkgsrc -# Possible: any path -# Default: not defined - -LOCALBASE?= /usr/pkg -# Where non-X-based packages will be installed -# Possible: any path -# Default: /usr/pkg - -CROSSBASE?= ${LOCALBASE}/cross -# Where "cross" category packages install -# Possible: any path -# Default: ${LOCALBASE}/cross - -VARBASE?= /var -# Where files containing local state information are installed -# Possible: any path -# Default: /var - -#X11_TYPE?= native -# Used to set the X11 implementation used to build X11 packages. -# Possible: xorg (uses x11/xorg-libs), XFree86 (uses x11/XFree86-libs), or -# native (uses pkgtools/x11-links to use the native, non-pkgsrc-managed X11). -# Default: native - -# Default installation prefix for meta-pkgs/XFree86 and -# meta-pkgs/xorg. -.if defined(X11_TYPE) && !empty(X11_TYPE:MXFree86) -X11ROOT_PREFIX?= XFree86 -.elif defined(X11_TYPE) && !empty(X11_TYPE:Mxorg) -X11ROOT_PREFIX?= xorg -USE_BUILTIN.Xfixes= yes -USE_BUILTIN.Xcomposite= yes -.else -X11ROOT_PREFIX?= # empty -.endif - -.if ((defined(X11_TYPE) && !empty(X11_TYPE:MXFree86) || \ - defined(X11_TYPE) && !empty(X11_TYPE:Mxorg)) && \ - defined(X11_TYPE) && empty(X11_TYPE:Mnative)) -X11BASE?= ${LOCALBASE}/${X11ROOT_PREFIX} -.endif -#X11BASE?= /usr/X11R6 -# Where X11 is installed on the system. -# (and the default install path of X11 pkgs) -# Possible: any path -# Default: /usr/X11R6, /usr/openwin for Solaris - -MLDONKEY_GROUP?= mldonkey -# System group to run mldonkey's core as. -# Possible: any group name -# Default: mldonkey - -#MOTIFBASE?= /usr/X11R6 -# Where Motif-2.0-compatible headers and libraries are installed -# on the system. -# Possible: any path -# Default: ${X11PREFIX} or where openmotif or lesstif is installed - -USE_XPKGWEDGE?= yes -# Whether we should use xpkgwedge or not to install all packages into -# ${LOCALBASE}. -# Possible: yes, no -# Default: yes - -BSDSRCDIR?= /usr/src -# Where the NetBSD src module source tree is located -# used in the emulators/plex86, emulators/vmware-module{,3}, net/arla, -# sysutils/aperture, and sysutils/fdgw packages -# Possible: any path -# Default: /usr/src - -BSDXSRCDIR?= /usr/xsrc -# Where the NetBSD xsrc module source tree is located -# used in the x11/xservers package -# Possible: any path -# Default: /usr/xsrc - -DISTDIR?= ${PKGSRCDIR}/distfiles -# Directory where original distribution -# files are stored. -# Possible: any path you like -# Default: /usr/pkgsrc/distfiles - -#DIST_PATH= /cdrom/0/distfiles:${HOME}/distfiles -# colon-delimited list of directories in which to search for -# ${DISTFILES} and ${PATCHFILES}. If the requested file is not in any -# of the directories in ${DIST_PATH}, it will be downloaded into -# ${DISTDIR}. If the requested file is in one of the directories in -# ${DIST_PATH}, a symbolic link will be made to it from ${DISTDIR}. -# ${DIST_PATH} directories will will be searched before ${DISTDIR}, -# letting a CD hold the main distfiles archive, and local ${DISTDIR} -# hold any updated distfiles, for example. -# Possible: any directories -# Default: none - -DEFAULT_VIEW?= "" -# This is the default view to which packages are added after installation. -# Default: "" (the empty view) - -.if exists(${LOCALBASE}/bin/ftp) -FETCH_CMD?= ${LOCALBASE}/bin/ftp -.else -FETCH_CMD?= /usr/bin/ftp -.endif -# Default program to fetch the files with pkgsrc. -# Default: NetBSD's ftp(1). -# Possible: any. - -.if ${FETCH_CMD:T} == "ftp" -FETCH_RESUME_ARGS?= -R -.else -FETCH_RESUME_ARGS?= # empty -.endif -# Used when PKG_RESUME_TRANSFERS is enabled, to specify default argument -# to resume transfers. -# Default: -R -# Possible: depends on your FETCH_CMD value. - -.if ${FETCH_CMD:T} == "ftp" -FETCH_OUTPUT_ARGS?= -o -.else -FETCH_OUTPUT_ARGS?= # empty -.endif -# Used when PKG_RESUME_TRANSFERS is enabled, to specify default argument -# in FETCH_CMD to fetch the file to a temporary name. -# Default: -o -# Possible: depends on your FETCH_CMD value. - -LIBTOOLIZE_PLIST?= yes -# This determines whether to expand libtool archives (.la files) in PLISTs -# into the represented library names. -# Possible: yes, no -# Default: yes - -PKG_INSTALLATION_PREFS?= overwrite pkgviews -# This is a whitespace-separated list of installation types to try when -# building a package, in order of preference. -# Possible: any of: overwrite, pkgviews -# Default: overwrite pkgviews - -PKG_RESUME_TRANSFERS?= NO -# Used in pkgsrc to resume transfers, if enabled the whole file won't be -# downloaded from scratch again. -# Possible: yes or no. -# Default: no. - -PKG_SYSCONFBASE?= ${PREFIX}/etc -# This is the main config directory under which all package configuration -# files should be found. -# Possible: any path you like -# Default: ${PREFIX}/etc - -RCD_SCRIPTS_DIR?= /etc/rc.d -# This is the system rc.d script directory in which all rc.d scripts -# expected to be executed at boot-time should be found. Package views -# users may want to set this to "${PKG_SYSCONFBASEDIR}/rc.d". -# Possible: any path you like -# Default: /etc/rc.d - -PACKAGES?= ${PKGSRCDIR}/packages -# Store generated packages on a per-architecture base -# Possible: any path you like -# Default: /usr/pkgsrc/packages - -PKGVULNDIR?= ${DISTDIR} -# Specifies where the `vulnerabilities' file is located. This variable -# is used by the audit-packages program and by pkgsrc itself to do security -# checks before building/installing programs. -# Possible: any path you like -# Default: /usr/pkgsrc/distfiles - -#PASSIVE_FETCH= -# Use ftp(1) in passive mode, for use behind filtering firewalls. -# (Set by default in ftp(1) in NetBSD-current) -# Possible: defined, not defined -# Default: not defined - -PATCH_FUZZ_FACTOR?= -F0 -# Fuzz factor to use when applying patches. Will only be applied when -# using a patch(1) that understands -F. This should be a "?=" -# setting, since package Makefiles may set this value, before -# /etc/mk.conf is read. -# Possible: "-Fn" where n is a number, none -# Default: "-F0" - -#ACCEPTABLE_LICENSES= fee-based-commercial-use no-commercial-use \ -# no-profit limited-redistribution shareware -# Whitespace-delimited list of the types of license which are -# acceptable for installation. (apart from standard "free" licenses -# such as Berkeley/CMU and GPL). Possible values are presented below. -# -# Default: none - -#ACCEPTABLE_LICENSES+= IDEA-licence -# Enable it if you accept the license terms for libidea -# and would like to build libidea. see pkgsrc/security/libidea. -#ACCEPTABLE_LICENSES+= adobe-acrobat-license -# Enable it if you accept the usage policy for Adobe Acrobat -# and would like to build it. see pkgsrc/print/acroread. -#ACCEPTABLE_LICENSES+= amiwm-license -# Enable it if you accept the license terms for amiwm -# and would like to build amiwm. see pkgsrc/wm/amiwm. -#ACCEPTABLE_LICENSES+= astrolog-license -# Enable it if you accept the license terms for astrolog -# and would like to build astrolog. see pkgsrc/misc/astrolog. -#ACCEPTABLE_LICENSES+= citrix_ica-license -# Enable it if you accept the license proposed at -# http://www.citrix.com/download/unix-downloads.htm -# when you try to download the corresponding client to download and build -# the package. -#ACCEPTABLE_LICENSES+= csound-license -# Enable it if you accept the redistribution/use license for csound and would -# like to build csound. see pkgsrc/licenses/csound-license -#ACCEPTABLE_LICENSES+= cyrus-imapd-license -# Enable it if you accept the license terms for cyrus-imapd -# and would like to build cyrus-imapd. see pkgsrc/mail/cyrus-imapd. -#ACCEPTABLE_LICENSES+= emiclock-license -# Enable it if you accept the license terms for emiclock -# and would like to build it. see pkgsrc/time/emiclock. -#ACCEPTABLE_LICENSES+= fee-based-commercial-use -# Enable it if you are okay to build/use third-party software, which require -# fees for commercial use (i.e. you are willing to pay, or you are -# non-commercial). -#ACCEPTABLE_LICENSES+= fprot-workstation-license -# Enable it if you accept the license for fprot-workstation-bin and would -# like to build the package. see pkgsrc/licenses/fprot-workstation-license -#ACCEPTABLE_LICENSES+= graphviz-license -# Enable it if you accept the license terms for graphviz -# and would like to build it. see pkgsrc/graphics/graphviz. -#ACCEPTABLE_LICENSES+= jdk-license -# Enable it if you accept the license terms for jdk -# and would like to build jdk. see pkgsrc/lang/jdk. -#ACCEPTABLE_LICENSES+= jdk13-license -# Enable it if you accept the download license for Sun JDK1.3 and would -# like to build Sun JDK13. see pkgsrc/langun-jre13. -#ACCEPTABLE_LICENSES+= kermit-license -# Enable it if you accept the redistribution license for ckermit and would -# like to build ckermit. see pkgsrc/licenses/kermit-license -#ACCEPTABLE_LICENSES+= limited-redistribution -# Enable it if you are okay to build/use third-party software, which has -# restriction on redistribution (i.e. you will obey the restriction on -# redistribution it imposes). -#ACCEPTABLE_LICENSES+= majordomo-license -# Enable it if you accept the license terms for majordomo -# and would like to build majordomo. see pkgsrc/mail/majordomo. -#ACCEPTABLE_LICENSES+= maude-license -# Enable it if you filled out and returned the license found at -# http://maude.csl.sri.com/license/license.html -# and want to build maude. -#ACCEPTABLE_LICENSES+= mosaic-license -# Enable it if you accept the license terms for mosaic -# and would like to build mosaic. see pkgsrc/www/Mosaic. -#ACCEPTABLE_LICENSES+= ms-ttf-license -# Enable it if you accept the license terms for Microsoft TrueType fonts -# and would like to install them. see pkgsrc/fonts/ms-ttf. -#ACCEPTABLE_LICENSES+= mush-license -# Enable it if you accept the license terms for mush -# and would like to build mush. see pkgsrc/mail/mush. -#ACCEPTABLE_LICENSES+= nntpclnt-license -# Enable it if you accept the license terms for nntpclnt -# and would like to build nntpclnt. see pkgsrc/news/nntpclnt. -#ACCEPTABLE_LICENSES+= no-commercial-use -# Enable it if you are okay to build/use third-party software, which is not -# for commercial use (i.e. you are non-commerical) -#ACCEPTABLE_LICENSES+= no-profit -# Enable it if you are okay to build/use third-party software, which is not -# for for-profit use (i.e. you will use the software for non-profit purpose) -#ACCEPTABLE_LICENSES+= opera-license -# Enable it if you accept the redistribution license for opera and would -# like to build opera. see pkgsrc/licenses/opera-license -#ACCEPTABLE_LICENSES+= palmos-sdk-license -# Enable if you agree with the license for using the PalmOS SDK. -# Used by pkgsrc/devel/palmos-includes. For the license, see -# pkgsrc/licenses/palmos-sdk-license. -#ACCEPTABLE_LICENSES+= pine-license -# Enable it if you accept the license terms for pine -# and would like to build pine. see pkgsrc/mail/pine. -#ACCEPTABLE_LICENSES+= portsentry-license -# Enable it if you accept the license terms for portsentry -# and would like to build portsentry. see pkgsrc/security/portsentry. -#ACCEPTABLE_LICENSES+= shareware -# Enable it if you are okay to build/use shareware. -#ACCEPTABLE_LICENSES+= srp_client-license -# Enable it if you accept the license terms for srp_client -# and would like to build srp_client. see pkgsrc/security/srp_client. -#ACCEPTABLE_LICENSES+= sun-jsdk20-license -# Enable it if you accept the download license for Sun JSDK and would -# like to build Sun JSDK. see pkgsrc/lang/jdk. -#ACCEPTABLE_LICENSES+= sun-swing-license -# Enable it if you accept the download license for Sun's Swing (JFC) toolkit -# and would like to build JFC. see pkgsrc/x11/swing. -#ACCEPTABLE_LICENSES+= trn-license -# Enable it if you accept the license terms for trn -# and would like to build trn. see pkgsrc/news/trn. -#ACCEPTABLE_LICENSES+= trplayer-license -# Enable it if you accept the license terms for trplayer -# and would like to build trplayer. See pkgsrc/audio/trplayer. -#ACCEPTABLE_LICENSES+= unarj-license -# Enable it if you accept the license terms for the unarj archiver -# and would like to build unarj. see pkgsrc/archivers/unarj. -#ACCEPTABLE_LICENSES+= unrar-license -# Enable it if you accept the license terms for the unrar archiver -# and would like to build unrar. see pkgsrc/archivers/unrar. -#ACCEPTABLE_LICENSES+= webwasher-license -# Enable it if you accept the license terms for webwasher and would -# like to build webwasher. see pkgsrc/licenses/webwasher-license -#ACCEPTABLE_LICENSES+= zoo-license -# Enable it if you accept the license terms for the zoo archiver -# and would like to build zoo. see pkgsrc/archivers/zoo. - -#SPECIFIC_PKGS= -# Don't use the default of all packages (from the top-level of the -# pkgsrc tree), and use the values of the definitions -# SITE_SPECIFIC_PKGS, HOST_SPECIFIC_PKGS, GROUP_SPECIFIC_PKGS, and -# USER_SPECIFIC_PKGS. -# Possible: defined, not defined -# Default: not defined - -#SITE_SPECIFIC_PKGS= -# List of packages that are wanted for each host on the site. Each -# package in the list is of the form <category>/<package>. -# Possible: any combination of packages -# Default: not set - -#HOST_SPECIFIC_PKGS= -# List of packages that are wanted for this particular host/machine. -# Each package in the list is of the form <category>/<package>. -# Possible: any combination of packages -# Default: not set - -#GROUP_SPECIFIC_PKGS= -# List of packages that are wanted for this group of users. Each -# package in the list is of the form <category>/<package>. -# Possible: any combination of packages -# Default: not set - -#USER_SPECIFIC_PKGS= -# List of packages that are wanted for this particular user. Each -# package in the list is of the form <category>/<package>. -# Possible: any combination of packages -# Default: not set - -EXTRACT_USING?= nbtar -# Use the specified tool to extract tar/ustar archives. -# Possible: gtar, nbtar, pax -# Default: nbtar - -#FAILOVER_FETCH= -# Perform a checksum at "make fetch" time. If the checksum doesn't -# match the stored value, try to retrieve the file from the next site -# in the list -# Possible: defined, not defined -# Default: not defined - -#MASTER_SORT= .ac.at .at .de .ch .se .fi .no -# Whitespace delimited list of preferred download locations. -# MASTER_SITES and PATCH_SITES will be reordered according to the hosts' -# address last components. -# Possible: list of domain name suffixes -# Default: none - -#MASTER_SORT_REGEX= ftp://.*/ -# Same as MASTER_SORT, but takes a regular expression for more -# flexibility in matching. Regexps defined here have higher priority -# than MASTER_SORT. This example would prefer ftp transfers over -# anything else. -# Possible: Regexps as in awk(1) -# Default: none - -#PATCH_DEBUG= -# Used to debug patches as they are applied -# Possible: defined, not defined -# Default: not defined - -#PKG_FC= -# The Fortran compiler used to compile Fortran code contained in -# packages. -# Possible: any Fortran compiler -# Default: none - -#IMAKE?= ${X11BASE}/bin/imake ${IMAKEOPTS} -# The imake binary to invoke. -# Possible: any path followed by any valid flags -# Default: ${X11BASE}/bin/imake ${IMAKEOPTS} - -#IMAKEOPTS= -# Options passed to imake(1). The defaults ensure that imake finds the -# correct commands. -# Possible: any valid flags -# Default: -# for Solaris with gcc: -# -DHasGcc2=YES -DHasGcc2ForCplusplus=YES -# for IRIX: -# -DMakeCmd=${PREFIX}/bin/bmake -DProjectRoot=${X11BASE} \ -# -DManUsr=${PREFIX} -.if ${OPSYS} == "IRIX" -#IMAKEOPTS?= -DMakeCmd=${PREFIX}/bin/bmake -DProjectRoot=${X11BASE} \ -# -DManUsr=${PREFIX} -# ABI specific flags may be added during bootstrapping process or by hand: -. if defined(ABI) -. if ${ABI} == "32" -#IMAKEOPTS+= -DBuildN32 -. else -#IMAKEOPTS+= -DBuild64bit -. endif -. endif -# you may also wish to add ISA specific flags, such as "-DSgiISA32=4" if -# you are compiling for mips4. -.elif ${OPSYS} == "SunOS" -# The flags required by imake with gcc on Solaris are automatically -# added if gcc is being used. Though it should not be needed, you can -# override this using: -#IMAKEOPTS+= -DHasGcc2=YES -DHasGcc2ForCplusplus=YES -.endif - -PRE_ROOT_CMD?= ${TRUE} -# Command to be run by normal user, just before becoming root (see -# SU_CMD) to install the package. For example, "chmod -R o+w ${WRKDIR}" -# would allow others to write and modify files below ${WRKDIR}. -# Possible: any shell commands -# Default: none - -SETGIDGAME?= no -# This flags specifies whether or not certain games are installed setgid, -# which would allow them to write to a group-owned score file. -# See also: GAMEGRP, GAMEMODE, GAMEOWN -# Possible: yes, no -# Default: no - -SU_CMD?= ${ROOT_CMD} -# Command to perform before "make install", if the user does not have -# an effective uid of 0. A possible substitute is "sudo sh -c" -# Possible: su, sudo, or priv, with appropriate arguments -# Default: dependent on operating system. For NetBSD: ${SU} - root -c - -SU_CMD_PATH_APPEND?=/sbin:/usr/sbin -# Additional directories (in a colon separated list) to be added to the -# PATH environment variable when running ${SU_CMD}. -# Default: /sbin:/usr/sbin - -FATAL_OBJECT_FMT_SKEW?=yes -# If there is a pre-requisite package, which has a different object format -# from that currently being used, halt execution. One (rare) situation where -# it is possible for the difference to be harmless is where the pre-requisite -# package provides an executable, not a library. -# Possible: yes, no -# Default: yes - -WARN_NO_OBJECT_FMT?=yes -# Packages installed on a machine before OBJECT_FMT was added to the -# BUILD_DEFS definitions (on 29th September 1999) cannot say which -# object format they are in. This will cause a warning to be displayed. -# Set this to "no" to stop the warning message being shown. -# Possible: yes, no -# Default: yes - -#SMART_MESSAGES=yes -# Display the make(1) target, and the current stack of packages being built, -# when displaying messages during package builds. -# Possible: defined, not defined -# Default: not defined - -#BINPKG_SITES=... -# Whitespace separated list of URLs for binary packages. Directories -# "All" etc. are expected in the named place, variables "rel" and -# "arch" are replaced with OS release ("1.5", ...) and architecture -# ("mipsel", ...) -# Possible: any ftp url, see above. -# Default: ftp://ftp.NetBSD.org/pub/NetBSD/packages/$${rel}/$${arch} - -#BIN_INSTALL_FLAGS= -# List of flags passed to pkg_add(8) in the bin_install package. -# Possible: -v, -u, etc. See pkg_add(8) -# Default: (no option) - -#LOCALPATCHES=... -# Directory where local patches are stored. See pkgsrc/doc/pkgsrc.txt. -# Possible: Any local directory -# Default: none - -# -# Definitions used only in the packages collection -# - -#ACROREAD_FONTPATH?= ${PREFIX}/lib/X11/fonts/TTF -# Colon separated list of additional directories for acroread7 to -# look in for TTF/Type1 fonts. -# Default: ${PREFIX}/lib/X11/fonts/TTF - -#AMANDA_SMB= -# Used in amanda-client and amanda-dev-client to enable backup with -# smbclient. -# Possible: defined, not defined -# Default: not defined - -AMANDA_USER?= backup -# Used in the amanda packages to specify the login user and group -# responsible for backups. -# Possible: any user name -# Default: backup - -AMANDA_TMP?= /tmp/amanda -# Specifies the directory in which amanda puts its debug and temporary -# files. -# Default: /tmp/amanda - -AMANDA_VAR?= ${VARBASE}/amanda -# Specifies the directory in which amanda puts its logs and status -# files. -# Default: ${VARBASE}/amanda - -#APACHE_CUSTOM_CFLAGS= -# Used in apache to pass extra CFLAGS to the compiler during -# the build. -# Possible: any legal compiler flags, e.g. -O6 -DHARD_SERVER_LIMIT=512 -# Default: not defined - -#APACHE_PERF_TUNING= YES -# Used in apache to optimize for maximum performance. -# Possible: not defined, YES -# Default: not defined - -APACHE_USER?= www -# Used in apache, apache2, isap, and smb2www to specify the user -# allowed to execute the `suexec' wrapper. Expected to be the user the -# httpd server normally runs as. -# Possible: any user name -# Default: www - -APACHE_GROUP?= www -# Used in apache, apache2, squirrelmail, and iasp to specify -# the default group of the user allowed to execute the `suexec' wrapper. -# Expected to be the group the httpd server normally runs as. -# Possible: any group name -# Default: www - -#APACHE_SUEXEC_CONFIGURE_ARGS= --suexec-uidmin=1000 -# Used in apache and apache2 to specify additional suexec options -# to be passed to the configure script. -# Possible: any --suexec-* options recognized by the Apache configure script. -# Default: not defined - -APACHE_SUEXEC_DOCROOT?= ${LOCALBASE}/share/httpd/htdocs -# Used in apache and apache2 to specify the document space in -# which suexec will be allowed to work. -# Possible: Any valid directory -# Default: ${LOCALBASE}/share/httpd/htdocs - -ARLA_CACHE?= ${LOCALBASE}/cache -# Used in arla to specify the location of the cache used by arla. Should -# be on a local disk. -# Default: ${LOCALBASE}/cache - -ATERM_USE_KANJI?= NO -# Used in aterm to enable kanji support. -# Possible: YES or undefined or anything else -# Default: NO - -ATERM_USE_BIG5?= NO -# Used in aterm to enable chinese support. (?) -# Possible: YES or undefined or anything else -# Default: NO - -ATERM_USE_XTERM_SCROLL?= NO -# Used in aterm to use a xterm-like scrollbar instead of a NeXT-like. -# Possible: YES or undefined or anything else -# Default: NO - -ATERM_USE_GREEK?= NO -# Used in aterm to enable greek keyboard support. -# Possible: YES or undefined or anything else -# Default: NO - -#AVIFILE_USE_QT= YES -# Used in avifile-devel to enable support for qt2. These utilities will be -# built in addition to non-qt version: avi{bench,cat,make,recompress,type}. -# aviplay (qt-based player that uses avifile libraries) will be built too, -# but it has problems with threads and does not work yet. -# Default: not defined - -#BATTLEBALL_USE_MESA= -# Used in battleball to build in support for OpenGL/Mesa. Will use -# Mesa-glx (rather than Mesa) if Mesa-glx is already installed. -# Possible: not defined, YES -# Default: not defined - -BIND_DIR?= ${VARBASE}/chroot/named -# The directory for BIND system user. -# Possible: any valid location -# Default: ${VARBASE}/named - -BIND_GROUP?= named -# System group to run the BIND name server as. Used by the "bind9" package. -# Possible: any group name -# Default: named - -BIND_USER?= named -# System user to run the BIND name server as. Used by the "bind9" package. -# Possible: any user name -# Default: named - -#BITCHX_WITH_GTK= -# Used in bitchx to determine whether to include support for GTK, -# for a GUI client. -# Possible: not defined, YES -# Default: not defined - -#BLENDER_INSTALL_DOC= YES -# Used in blender to determine if the extensive html documentation should be -# installed or not. -# Possible: YES, not defined -# Default: not defined - -#BLENDER_USE_OGG= YES -# Used in blender to determine if support for the ogg audio format should be -# compiled in or not. -# Possible: YES, not defined -# Default: not defined - -#BLENDER_USE_VORBIS= YES -# Used in blender to determine if support for the vorbis audio format should -# be compiled in or not. -# Possible: YES, not defined -# Default: not defined - -#BLENDER_USE_OPENAL= YES -# Used in blender to determine if support for the openal audio format should -# be compiled in or not. -# Possible: YES, not defined -# Default: not defined - -#BLENDER_USE_EXPPYTHON= YES -# Used in blender to determine if experimental python support should be -# compiled in or not. -# Possible: YES, not defined -# Default: not defined - -#BULK_PREREQ= -# Used during bulk package builds. Packages listed in this variable are -# assumed to be required to build all packages. Only a very limited number -# of packages belong in this variable. An example of an appropriate package -# is pkgtools/xpkgwedge. Currently pkgtools/digest is always added to this -# list. -# Possible: category/pkg -# Default: not defined - -CANNA_GROUP?= daemon -# Used in the canna-server-bin package to specify the server group. -# Possible: any group name -# Default: daemon - -CANNA_USER?= daemon -# Used in the canna-server-bin package to specify the server user. -# Possible: any user name -# Default: daemon - -#CDRECORD_CONF= ${PKG_SYSCONFDIR}/cdrecord.conf -# The location of the cdrtools/cdrecord configuration file. The -# sysutils/cdrecord pkg issues a warning if the cdrtools default of -# /etc/default/cdrecord is changed, and the man pages are updated -# accordingly. This is required by the cdrtools license. -# Possible: any file name -# Default: ${PKG_SYSCONFDIR}/cdrecord.conf - -CLAMAV_GROUP?= clamav -# Used in clamav to specify the group to run clamav -# Possible: any group name -# Default: clamav - -CLAMAV_USER?= clamav -# Used in clamav to specify the user to run clamav -# Possible: any user name -# Default: clamav - -CONSERVER_DEFAULTHOST?= localhost -# Used by conserver package to specify the master server hostname. -# Possible: any hostname -# Default: localhost - -CONSERVER_DEFAULTPORT?= 782 -# Used by conserver package to specify the default listen port. -# Possible: 1-65535 -# Default: 782 - -CUE_USE_CANNA?= NO -# Used by cue package to determine whether to enable Canna support. -# Possible: YES, NO -# Default: NO - -CUPS_GROUP?= sys -# Used in cups to specify the group to run CUPS commands as. -# Possible: any group name -# Default: sys - -CUPS_USER?= lp -# Used in cups to specify the user to run CUPS commands as and to create -# temporary files in the /var/spool/cups/tmp directory. -# Possible: any user name -# Default: lp - -# CYRUS_IDLE -# use METHOD for IMAP IDLE -# METHOD is poll, idled or no -# Default: not defined - -CYRUS_GROUP?= mail -# Used in cyrus-imapd, cyrus-imapd21, cyrus-sasl, and cyrus-sasl2 to -# specify the group used for installing setuid programs. -# Possible: any group name -# Default: mail - -CYRUS_USER?= cyrus -# Used in cyrus-imapd, cyrus-imapd21, cyrus-sasl, and cyrus-sasl2 to -# specify the userid used for installing setuid programs. -# Possible: any user name -# Default: cyrus - -DEFANG_GROUP?= defang -# Used in the mimedefang package to specify the group to run commands as -# Possible: any group name -# Default: defang - -DEFANG_USER?= defang -# Used in the mimedefang package to specify the user to run commands as -# Possible: any user name -# Default: defang - -DEFANG_SPOOLDIR?= ${VARBASE}/spool/MIMEDefang -# Location of spool and quarantined files for the mimedefang package -# Default: ${VARBASE}/spool/MIMEDefang - -#DEFAULT_IRC_SERVER= -# Used in ircII to set the default irc server. -# Possible: see the list at -# http://www.irchelp.org/irchelp/networks/servers/efnet.html -# Default: not defined - -#DEFAULT_SERIAL_DEVICE= -# Used to provide a default setting for the serial device for -# various packages which communicate over the serial port. -# Possible: /dev/your_favorite_serial_device -# Default: defaults for various machine_archs are set in mk/platform/${OPSYS}.mk - -DELIVER_SUID?= NO -# Used to decide if deliver should be installed suid root. -# Possible: YES, NO -# Default: NO - -DT_LAYOUT?= US -# Used by dt package to specify the keyboard layout. -# Possible: US, FI, FR, GER, DV -# Default: FI - -ELK_GUI?= none -# Used by elk to determine which GUI API modules are enabled. -# Possible: none, or some combination of xaw and/or motif -# Default: none - -EMACS_TYPE?= emacs21 -# Used by emacs.mk to determine which emacs version should be installed and -# emacs lisp packages should be built for. -# Possible: emacs21, emacs21nox, emacs20, xemacs214, xemacs215 -# Default: emacs21 - -EMACS_USE_POP?= yes -# Used by emacs package to determine whether pop support is enabled or not. -# Possible: yes, no -# Default: yes - -#EMACS_USE_X= -# Used by emacs package to determine whether X support is enabled or not. -# If defined, the value is directly passed as argument of --with-x. -# If not defined, the configure script will configure automatically. -# Possible: yes, no, not defined -# Default: not defined - -#EMACS_USE_X_TOOLKIT= -# Used by emacs package to determine what kind of toolkit support is enabled. -# If defined, the value is directly passed as argument of --with-x-toolkit. -# If not defined or defined to yes, the configure script will pick up an -# appropriate one. E.g, if X11R5 or later is found, lucid will be used. -# Possible: yes, no, not defined, athena, lucid, motif -# Default: not defined - -EMACS_USE_XAW3D?= NO -# Used by emacs package to determine if should use Xaw3D for the scrollbar. -# Possible: YES, NO -# Default: NO - -EXIM_GROUP?= mail -# Used in the exim package to specify the server group. -# Possible: any group name -# Default: mail - -EXIM_USER?= mail -# Used in the exim package to specify the server user. -# Possible: any user name -# Default: mail - -#FLUXBOX_USE_XINERAMA?= NO -# Compile flukebox with xinerama extensions -# Possible: YES, NO -# Default: NO - -#FLUXBOX_USE_KDE?= NO -# Compile flukebox with KDE support -# Possible: YES, NO -# Default: NO - -#FLUXBOX_USE_GNOME?= NO -# Compile flukebox with GNOME support -# Possible: YES, NO -# Default: NO - -#FLUXBOX_USE_XFT?= YES -# Compile flukebox with Xft support -# Possible: YES, NO -# Default: YES - -FOX_USE_XUNICODE?= YES -# Used in fox to build in support for Unicode by XUnicode. See -# http://www.ab.wakwak.com/~tino/jatk/fox/ (in japanese) for more information. -# Possible: YES, NO -# Default: YES - -FREEWNN_USER?= wnn -# Used in the ja-freewnn-server-bin package to specify the Free wnn user. -# Possible: any user name -# Default: wnn - -FREEWNN_GROUP?= jserver -# Used in the ja-freewnn-server-bin package to specify the Free wnn group. -# Possible: any group name -# Default: jserver - -.if !empty(SETGIDGAME:M[yY][eE][sS]) -GAMEDATAMODE?= 664 -.else -GAMEDATAMODE?= ${SHAREMODE} -.endif -# Used for various games to allow writing to a group-owned score file. -# See also: GAMEMODE, GAMEOWN, SETGIDGAME -# Possible: any file ownership -# Default: ${SHAREMODE} if SETGIDGAME is not set to 'yes', 644 otherwise - -GAMEGRP?= ${BINGRP} -# Used for various games to allow writing to a group-owned score file. -# If SETGIDGAME is 'yes', setting this to a dedicated group, such as 'games' -# would make sense. -# See also: GAMEMODE, GAMEOWN, SETGIDGAME -# Possible: any group name -# Default: ${BINGRP} - -GAMEMODE?= ${BINMODE} -# Used for various games to allow writing to a group-owned score file. -# If SETGIDGAME is 'yes', setting this to 2555 would make sense. -# See also: GAMEGRP, GAMEOWN, SETGIDGAME -# Possible: any mode -# Default: ${BINMODE} - -GAMEOWN?= ${BINOWN} -# Used for various games to allow writing to a group-owned score file. -# If SETGIDGAME is 'yes', setting this to a dedicated user, such as 'games' -# would make sense. -# See also: GAMEGRP, GAMEMODE, SETGIDGAME -# Possible: any user name -# Default: ${BINOWN} - -GAWK_ENABLE_PORTALS?= NO -# Used by gawk package to enable/disable handling file names that start with -# `/p/' as a 4.4 BSD type portal file, i.e., a two-way pipe for `|&'. -# Possible: YES, NO -# Default: NO - -GIMP_WITH_HELPBROWSER?= no -# Set to "yes" to compile gimp against GNOME libs and get a working -# help browser. Adds quite some bloat in the form of dependencies. -# Possible: yes, no -# Default: no - -GNU_PROGRAM_PREFIX?= g -# This is the prefix to add for GNU programs, like gls or gnutouch. -# Possible: g, gnu, empty, ... -# Default: g - -GOLEM_WITH_SOUND?= NO -# Used by golem package to determine whether to enable sound support. -# Possible: YES, NO -# Default: NO - -#GQMPEG_NO_JAPANESE?= yes -# Can be enabled to handle keep gqmpeg from interpreting ID3 tags -# different, to make it possible to read japanese language tags, which -# may be a problem with tags in other encodings (e.g. windows-1251 as -# commonly used for russian-language tags). -# Possible: yes, no, not defined -# Default: not defined (-> Japanese support enabled) - -#GQMPEG_NO_RUSSIAN?= yes -# Can be enabled to disable russian ID3 tag support -# Possible: yes, no, not defined -# Default: not defined (-> Russian support enabled) - -#GRUB_NETWORK_CARDS= -# Compile netboot support for the listed network interface cards into GRUB. -# Use e.g. "rtl8139" for RealTek 8139 support or "eepro100 epic100" for -# Intel Etherexpress Pro/100 and SMC EtherPower II support. -# Default: not defined (-> no netboot support) - -#GRUB_PRESET_COMMAND= -# Specifies a single command that will be embedded into GRUB's stage2 and -# executed at boot time as a default configuration file. This is usually -# useful to create stage2 files with automated diskless support; you should -# set this variable to "bootp", "dhcp" or "rarp", and use it together -# GRUB_NETWORK_CARDS. -# Default: not defined - -#GRUB_SCAN_ARGS= -# Can be used to supply additional configure arguments for netboot support in -# GRUB. Set e.g. "GRUB_NETWORK_CARDS" to "ne" and "GRUB_SCAN_ARGS" to -# "--enable-ne-scan=0x300" to let the boot loader search for an NE 2000 ISA -# card at I/O offset 0x300. -# Default: not defined - -ICECAST_CHROOTDIR?= ${VARBASE}/chroot/icecast -# Used in icecast2 to specify the chroot directory in which icecast -# will be allowed to work. -# Possible: Any valid directory -# Default: ${VARBASE}/chroot/icecast - -#ICECAST_CHUNKLEN=512 -# If you want a larger backlog for each client, which will allow for -# worse network congestion or other network errors before kicking the -# client, increase the ICECAST_CHUNKLEN value. -# Default: 64 - -#ICECAST_SOURCE_BUFFSIZE=8192 -# SOURCE_BUFFSIZE sets how many bytes will be read from the source -# before trying to send this chunk to the clients. If your server will -# take on a lot of listeners, or stream very high bitrate mpeg data, -# like video mpeg streams, and if you system supports it, you should -# increase this value to 65535 or something similar. -# Default: 8192 - -IMAP_UW_CCLIENT_MBOX_FMT?= unix -# Used in imap-uw to set the default format used by c-client programs for -# new mailbox creation. Check the UW IMAP documentation for more details -# regarding the pros and cons of the various mailbox formats. -# -# Possible: mbox, mbx, mh, mmdf, mtx, mx, news, phile, tenex, unix -# Default: unix - -#IMAP_UW_MAILSPOOLHOME=.MailBox -# To default user mailboxes to their home directory, -# specify the name of the mailbox file. -# Possible: Any valid filename, not defined -# Default: not defined - -#IMAP_UW_NO_CLEARTEXT?= YES -# Used in imap-uw to disallow plaintext passwords except when SSL or TLS -# is used. This effectively disallows cleartext passwords. -# -# Possible: not defined, YES -# Default: not defined - -#IMAP_UW_NO_SSL?= YES -# Used in imap-uw to build without any SSL or TLS support at all. Note that -# it doesn't make any sense to enable this together with IMAP_UW_NO_CLEARTEXT, -# nor is is it fully supported in pkgsrc for all clients. -# -# Possible: not defined, YES -# Default: not defined - -IMDICTDIR?= ${VARBASE}/dict -# Specify the directory for input method's dictionary installation. -# Possible: any valid location -# Default: ${VARBASE}/dict - -INN_DATA_DIR?= ${VARBASE}/news -# Used by inn to specify the data directory. -# Possible: any path you like -# Default: ${VARBASE}/news - -INN_USER?= news -# Used by inn to specify the username -# Possible: any valid username -# Default: news - -INN_GROUP?= news -# Used by inn to specify the groupname -# Possible: any valid groupname -# Default: news - -IRCD_HYBRID_SMALL_NET?= YES -# Used by ircd-hybrid to tune various ircd paramaters when running -# small IRC networks so the daemon does not use much resources. -# A set of variables - see below - can then be defined to fine tune the daemon -# behaviour. -# Possible: YES, NO -# Default: YES - -#IRCD_HYBRID_LINK_PREALLOCATE= -# Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify -# the number of server linkd to preallocate. -# Possible: nearly any integer value -# Default: 1024 from source, 64 if IRCD_HYBRID_SMALL_NET is "YES" - -#IRCD_HYBRID_CLIENTS_PREALLOCATE= -# Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify -# the number of client structures to preallocate. -# Possible: nearly any integer value -# Default: 1024 from source, 64 if IRCD_HYBRID_SMALL_NET is "YES" - -#IRCD_HYBRID_USERS_PREALLOCATE= -# Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify -# the number of user structures to preallocate. -# Possible: nearly any integer value -# Default: 1024 from source, 64 if IRCD_HYBRID_SMALL_NET is "YES" - -#IRCD_HYBRID_NICKNAMEHISTORYLENGTH= -# Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify -# the number of entries in the nickname history. -# Possible: nearly any integer value -# Default: 15000 from source, 1000 if IRCD_HYBRID_SMALL_NET is "YES" - -#IRCD_HYBRID_MAXSENDQLENGTH= -# Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify -# the maximum -in bytes- of internal send buffering for sockets. -# Possible: nearly any integer value -# Default: 9000000 from source, 500000 if IRCD_HYBRID_SMALL_NET is "YES" - -#IRCD_HYBRID_INITIAL_DBUFS= -# Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify -# the initial number of dbufs (dynamic buffering of a byte stream, -# similar to mbufs) to preallocate. -# Possible: nearly any integer value -# Default: 4000 from source, 300 if IRCD_HYBRID_SMALL_NET is "YES" - -#IRCD_HYBRID_HARD_FDLIMIT_= -# Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify -# the maximum number of file descriptor the daemon will use. -# Possible: 1 <> maximum file descriptor the system would give you -# Default: 256 from source, 90 if IRCD_HYBRID_SMALL_NET is "YES" - -#IRCD_HYBRID_INIT_MAXCLIENTS= -# Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify -# the maximum number of clients allowed to connect to the daemon. -# Possible: 1<> ~IRCD_HYBRID_HARD_FDLIMIT_ -# Default: 200 from source, 40 if IRCD_HYBRID_SMALL_NET is "YES" - -IRCD_HYBRID_USE_LOGFILE?= YES -# Used by ircd-hybrid. Specify if the daemon should use a logfile. -# Note: can be used even when IRCD_HYBRID_USE_SYSLOG is "YES". -# Possible: YES, NO -# Default: YES - -IRCD_HYBRID_USE_SYSLOG?= NO -# Used by ircd-hybrid. Specify if the daemon should use syslog. -# Note: can be used even when IRCD_HYBRID_USE_LOGFILE is "YES". -# Possible: YES, NO -# Default: NO - -IRCD_HYBRID_LPATH?= ${VARBASE}/log/ircd-hybrid.log -# Used by ircd-hybrid. Specify the pathname of the daemon logfile. -# Note: only used if IRCD_HYBRID_USE_LOGFILE is "YES". -# Possible: any path -# Default: ${VARBASE}/log/ircd-hybrid.log - -IRCD_HYBRID_FNAME_USERLOG?= ${VARBASE}/log/ircd-hybrid.users.log -# Used by ircd-hybrid. Specify the pathname of the user connections logfile. -# IRCD_HYBRID_USE_SYSLOG should be set to "YES" for this logfile be used. -# Possible: any path -# Default: ${VARBASE}/log/ircd-hybrid.users.log - -IRCD_HYBRID_FNAME_OPERLOG?= ${VARBASE}/log/ircd-hybrid.opers.log -# Used by ircd-hybrid. Specify the pathname of the operator connections -# logfile. -# Possible: any path -# Default: ${VARBASE}/log/ircd-hybrid.opers.log - -IRCD_HYBRID_PPATH?= ${VARBASE}/run/ircd-hybrid.pid -# Used by ircd-hybrid. Specify the pathname of the daemon pid file. -# Possible: any path -# Default: ${VARBASE}/run/ircd-hybrid.pid - -IRCD_HYBRID_SYSLOG_FACILITY?= LOG_LOCAL4 -# Used by ircd-hybrid. Specify which syslog facility the daemon should use -# when IRCD_HYBRID_USE_SYSLOG is "YES". -# Possible: any syslog facility (LOG_*) -# Default: LOG_LOCAL4 - -IRCD_HYBRID_INIT_LOG_LEVEL?= L_NOTICE -# Used by ircd-hybrid. Specify initial minimum level from which the daemon logs -# events. This is unrelated from syslog() level. -# Possible: L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO, L_DEBUG -# Default: L_NOTICE - -IRCD_HYBRID_IRC_USER?= irc -# Used by ircd-hybrid. Specify the user name under which the daemon runs. -# Possible: any user name -# Default: irc - -IRCD_HYBRID_IRC_GROUP?= irc -# Used by ircd-hybrid. Specify the group name under which the daemon runs. -# Possible: any group name -# Default: irc - -IRCD_HYBRID_NETWORK_NAME?= PKGSRCNet -# Used by ircd-hybrid. Specify the IRC network name advertised by the daemon. -# Possible: anything -# Default: PKGSRCNet - -IRCD_HYBRID_NETWORK_DESC?= Package Source Network -# Used by ircd-hybrid. Specify the IRC network description advertised by the -# daemon. -# Possible: anything -# Default: Package Source Network - -#IRRD_USE_PGP= -# Used by irrd package to specify the version of PGP to use, if any. -# Possible: 5, 2, not defined -# Default: not defined -# [XXX: configure will locate pgpv or pgp] - -#IRSSI_USE_PERL= YES -# Build irssi with perl so you can load scripts written in perl. -# Possible: YES, not defined -# Default: not defined - -IRSSI_USE_SSL?= YES -# Enable SSL in irssi (for IRC server connections) -# Possible: YES, NO -# Default: YES - -#XLOCK_DEFAULT_MODE= -#JB_FQHOSTNAME= -# Used by jitterbug package to include the fully-qualified domain name -# of the host. -# Possible: defined, not defined -# default: not defined - -JB_GROUP?=jitter -# Used by jitterbug package for groupname -# Possible: any valid groupname -# Default: jitter - -JB_GROUPID?=509 -# Used by jitterbug package for gid of JB_USER. -# Possible: any valid gid -# Default: 509 - -#JB_LOCALMAIL= -# Used by jitterbug package as the mail alias to receive mail from -# jitterbug -# Possible: any valid mail alias -# Default: none - -JB_PACKAGE?= test -# Used by jitterbug to determine the type of package to be installed. -# Possible: test, production -# Default: test - -JB_USER?=jitter -# Used by jitterbug package for username -# Possible: any valid username -# Default: jitter - -JB_USERID?=509 -# Used by jitterbug package for uid of JB_USER. -# Possible: any valid uid -# Default: 509 - -JABBERD_USER?= jabberd -# Used in jabberd to specify the user used to run the daemon. -# Possible: any valid username -# Default: jabberd - -JABBERD_GROUP?= jabberd -# Used in jabberd to specify the group userd to run the daemon. -# Possible: any valid group -# Default: jabberd - -JABBERD_LOGDIR?= ${VARBASE}/log/jabberd -# Used in jabberd to specify the default directory under which log -# files are placed. -# Possible: any directory -# Default: ${VARBASE}/log/jabberd - -JABBERD_SPOOLDIR?= ${VARBASE}/spool/jabberd -# Used in jabberd to specify the default directory under which server -# information is stored. -# Possible: any directory -# Default: ${VARBASE}/spool/jabberd - -JABBERD_PIDDIR?= ${VARBASE}/run/jabberd -# Used in jabberd to specify the default directory under which pid -# files are placed. -# Possible: any directory -# Default: ${VARBASE}/run/jabberd - -JAKARTA_HOME?= ${JAVA_HOME}/jakarta -# Used by the www/jakarta-tomcat package to choose an install location -# Possible: any directory -# Default: ${JAVA_HOME}/jakarta - -#JAVA_HOME= -# Location of jvm to be used by pkgsrc. Java-based packages will be installed -# in ${LOCALBASE}/lib/java, so that they are available to all jvms. -# -# Possible: any directory -# Default: home of JVM chosen by ${PKG_JVM} - -JDK_HOME?= ${LOCALBASE}/java -# Used by the lang/JDK package to choose an install location -# Possible: any directory, e.g. /usr/jdk -# Default: ${LOCALBASE}/java - -JSDK_HOME?= ${JAVA_HOME}/jsdk -# Location for Java Servlet Development Kit installed by www/jsdk20 -# Possible: any directory -# Default: ${JAVA_HOME}/jsdk - -#JWHOIS_ENABLE_CACHE= -# Enable cache option in net/jwhois package. -# Possible: defined or not defined. -# Default: not defined. - -#KERBEROS= -# Used in many packages to specify use of a Kerberos (or compatible) -# subsystem. Requires Kerberos libraries in /usr/lib. -# Possible: defined, not defined -# Default: not defined - -#KERMIT_SUID_UUCP -# If set to YES or yes, install kermit binary set-uid uucp. Permits an -# unprivileged user to access the serial ports, with default permissions -# on the /dev/tty0* special files. -# Possible: YES, yes, not defined -# Default: not defined - -#KJS_USE_PCRE= -# Used in kdelibs2 to determine if kjs (javascript) should use Perl -# Compatible Regular Expressions (pcre) -# Possible: yes, not defined -# Default: not defined - -#KNEWS_DOMAIN_FILE= -# Used in the knews package to set the domain name from the contents -# of this file. -# Possible: any valid path -# Default: none - -#KNEWS_DOMAIN_NAME= -# Used in the knews package to set the domain name. -# Possible: almost anything really, usually a FQDN. -# Default: none - -#KTERM_USE_WALLPAPER= -# Used in kterm package to support wallpaper -# Possible: not defined, YES -# Default: not defined - -#LAME_USE_GTK= -# Used in lame package to compile in the graphical analyzer (which uses -# GTK). -# Possible: not defined, defined -# Default: not defined - -#LIBDVDCSS_HOMEPAGE= -# Used in libdvdcss package as the homepage - we are unable to point this -# to one of the real sites for legal reasons -# Possible: any libdvdcss site -# Default: not defined - -#LIBDVDCSS_MASTER_SITES= -# Used in libdvdcss package as the master site - we are unable to point this -# to one of the real sites for legal reasons -# Possible: any libdvdcss site -# Default: not defined - -#LATEX2HTML_ICONPATH= -# Used in the latex2html package to set URL prefix for where to -# find latex2html's icons. -# Possible: a URL prefix -# Default: none - -LEAFNODE_DATA_DIR?= ${VARBASE}/news -# Used by leafnode to specify the data directory. -# Possible: any path you like -# Default: ${VARBASE}/news -# Note: default is the same as INN_DATA_DIR - -LEAFNODE_USER?= news -# Used by leafnode to specify the username -# Possible: any valid username -# Default: news -# Note: default is the same as INN_USER - -LEAFNODE_GROUP?= news -# Used by leafnode to specify the groupname -# Possible: any valid groupname -# Default: news -# Note: default is the same as INN_GROUP - -LINUX_LOCALES?= \ - af ar bg br ca cs cy da de el en eo es et eu fi fo fr ga gl \ - he hr hu hy id is it ja ka kl ko lo lt lv nl no oc pl pt ro \ - ru sk sl sr sv th tr uk vi wa zh -# Used in linux-locale package to install specify language(s) -# Possible: af ar bg br ca cs cy da de el en eo es et eu fi fo fr ga gl \ -# he hr hu hy id is it ja ka kl ko lo lt lv nl no oc pl pt ro \ -# ru sk sl sr sv th tr uk vi wa zh -# Default: all languages - -LPRNG_PRIV_PORTS?= NO -# Used by LPRng to require connections to be from privileged ports. -# Possible: YES, or NO. -# Default: NO - -LPRNG_SUID?= YES -# Used by LPRng to enable setuid installation of LPRng binaries. -# Possible: YES, or NO. -# Default: YES - -LSOF_MORE_SECURE?= 0 -# Used in lsof to specify that non-root users can only view their own files -# Possible: 0 (allow non-root users to view all open files), or -# 1 (only allow root to view all open files) -# Default: 0 - -LSOF_LESS_SECURE_SOCKETS?= 0 -# Used in lsof to specify that non-root users should still be able to view -# all open sockets even if LSOF_MORE_SECURE is set. If LSOF_MORE_SECURE is -# not set (ie, is zero), this option has no effect. -# Possible: 0 (don't allow non-root users to see sockets they don't own) -# 1 (allow all sockets to be viewed at all times) -# Default: 0 - -#M68060= -# Used mostly by packages (e.g.: gnupg, pgp2, ssh) which have fast -# 68020/030/040 assembler routines for multiprecision arithmetic -# which use the 32/64bit mul/div instruction. These instructions are -# software emulated on the 68060, thus very slow. Set to YES when -# compiling for the 68060 cpu. -# Possible: not defined, YES. -# Default: not defined. - -MAJORDOMO_GROUP?= majordom -# Used by the majordomo package as the groupid majordomo runs at. -# Possible: any -# Default: majordom - -MAJORDOMO_TMPDIR?= ${VARBASE}/tmp -# Used by the majordomo package as the directory to store temp files. -# Possible: any directory. -# Default: ${VARBASE}/tmp - -MAJORDOMO_USER?= majordom -# Used by majordomo package as the userid majordomo runs at. -# Possible: any -# Default: majordom - -#MAKEINFO_ARGS?= -# flags to be passed to makeinfo(1), if any. Warning: only use if you -# know what you're doing, may break PLISTs. -# Possible: any valid flag for makeinfo(1) -# Default: may set info files size for consistency across platforms and -# makeinfo version, also various machine_archs arguments may be set in -# mk/platform/${OPSYS}.mk with the _OPSYS_MAKEINFO_ARGS variable. - -MLDONKEY_HOME?= ${VARBASE}/mldonkey -# Directory where mldonkey will keep all configuration files and downloads -# when started with the rc.d script provided in the mldonkey package. -# Possible: any path -# Default: ${VARBASE}/mldonkey - -MLDONKEY_USER?= mldonkey -# System user to run mldonkey's core as. -# Possible: any user name -# Default: mldonkey - -MONOTONE_GROUP?= monotone -# System group to run the dedicated Monotone server as. Used by the -# monotone-server package. -# Possible: any group name -# Default: monotone - -MONOTONE_USER?= monotone -# System user to run the dedicated Monotone server as. Used by the -# monotone-server package. -# Possible: any user name -# Default: monotone - -#MOZILLA_USE_LINUX= -# Used by mozilla binary packages to prefer the use of Linux -# compatibility instead of native builds. -# Possible: set, unset -# Default: unset - -MOZILLA_USE_XFT?= NO -# Used by mozilla packages to enable Xft support where available. -# The mozilla-gtk2 package sets this value to YES unconditionally. -# Possible: YES, NO -# Default: NO - -MPLAYER_DISABLE_DRIVERS?= -# Whitespace separated list of output drivers that are not wanted in -# mplayer/gmplayer's binary. -# Possible: arts esd nas sdl -# Default: empty - -MPLAYER_ENABLE_RUNTIME_CPU_DETECTION?= YES -# Used by mplayer to enable runtime CPU detection -- this makes -# binary packages work on different machines than the one compiled one, -# but may be slower. -# Note that this only takes effect on i386 and that binary packages made with -# this option set to NO will only run reliably on a machine of the same -# CPU type. -# Possible: YES, NO -# Default: YES - -MPLAYER_USE_MEDIALIB?= NO -# Used by mplayer to enable optional support for Sun mediaLib library. -# Note that this only takes effect on Solaris. -# Possible: YES, NO -# Default: NO - -#MOTIF_TYPE?= openmotif -# Used by motif.buildlink3.mk to choose which Motif-2.0-compatible -# installation to use. This value is also automatically set by -# motif.buildlink3.mk to whichever Motif-2.0 installation represented by -# the possible values below is already installed, but defaults to -# ${MOTIF_TYPE_DEFAULT}. This value is ignored if MOTIFBASE is -# explicitly set. -# Possible: openmotif, lesstif, dt (Irix and Solaris only) -# Default: ${MOTIF_TYPE_DEFAULT} - -#MOTIF_TYPE_DEFAULT?= openmotif -# Used by motif.buildlink3.mk as the final default value for MOTIF_TYPE. -# Possible: openmotif, lesstif, dt (Irix and Solaris only) -# Default: openmotif, or dt (Irix and Solaris only) - -#MPG123_ARM_FIXED64=YES -# Used by mpg123 and mpg123-esound to enable ARM to use 64bit fixedpoint -# Possible: not defined, YES -# Default: not defined - -MTOOLS_ENABLE_FLOPPYD?= NO -# Used by the mtools package to determine whether or not the floppyd -# program is installed. X11 libraries and header files are needed to -# build floppyd and run floppyd. -# Possible: YES, NO -# Default: NO - -#MYSQL_USER?= mysql -# The username of the mysql administrator. -# Possible: any user name -# Default: mysql - -#MYSQL_GROUP?= mysql -# The group of the mysql administrator. -# Possible: any group name -# Default: mysql - -#MYSQL_DATADIR?= ${VARBASE}/mysql -# Home directory of the mysql administrator and location of the -# database files. -# Possible: any directory -# Default: ${VARBASE}/mysql - -#MYSQL_CHARSET= latin1 -# default character set of mysql. -# Possible: big5, cp1251, cp1257, croat, czech, danish, dec8, dos, estonia, -# euc_kr, gb2312, gbk, german1, greek, hebrew, hp8, hungarian, -# koi8_ru, koi8_ukr, latin1, latin2, latin5, swe7, usa7, win1250, -# win1251ukr, ujis, sjis and tis620 -# Default: latin1 - -#MYSQL_EXTRA_CHARSET= all -# additional charsets to be compiled in mysql. -# Possible: none, compolex, all or list selected from MYSQL_CHARSET's -# possible values. - -NMH_EDITOR?= vi -# default editor for use in nmh. -# Possible: any editor. -# Default: vi - -NMH_MTA?= smtp -# default MTA for use in nmh. -# Possible: smtp or sendmail. -# Default: smtp - -NMH_PAGER?= more -# default pager for use in nmh. -# Possible: any pager. -# Default: more - -#NS_PREFERRED= -# Used by netscape to determine preferred browser to open -# Possible: not defined, communicator, navigator, mozilla -# Default: not defined, which implies communicator - -#NS_NO_FLASH= -# Used by navigator/communicator package to decide if flash should be -# installed or not. By default, flash is installed. -# Possible: not defined, defined -# Default: not defined - -#NS_USE_BSDI= YES -# Used to decide if i386 BSDi Netscape binary should be used in preference -# to linux version. -# Possible: not defined, YES -# Default: not defined - -#NS_USE_SUNOS= YES -# Used to decide if sparc SunOS-4.1 Netscape binary should be used in preference -# to the Solaris-2.5.1 version. -# Possible: not defined, YES -# Default: not defined - -OPENSSH_CHROOT?= ${VARBASE}/chroot/sshd -# The chroot directory for OpenSSH with privilege separation. This directory -# will be created and MUST be only readable by root. -# Possible: any directory -# Default: ${VARBASE}/chroot/sshd - -OPENSSH_USER?= sshd -# The unprivileged user for OpenSSH with privilege separation. -# Possible: any user name -# Default: sshd - -OPENSSH_UID?= 16 -# The unprivileged UID for OpenSSH with privilege separation. -# Possible: any uid -# Default: 16 - -OPENSSH_GROUP?= sshd -# The group of the OPENSSH_USER for OpenSSH with privilege separation. -# Possible: any group name -# Default: sshd - -OPENSSH_GID?= 16 -# The GID of the OPENSSH_USER for OpenSSH with privilege separation. -# Possible: any gid -# Default: sshd - -P4USER?= perforce -# The unprivileged user for the Perforce server. -# Possible: any user name -# Default: perforce - -P4GROUP?= p4admin -# The group of the P4USER for the Perforce server. -# Possible: any group name -# Default: p4admin - -P4ROOT?= ${VARBASE}/perforce -# The directory where the Perforce server will store its depot. -# Possible: any directory -# Default: ${VARBASE}/perforce - -P4PORT?= 1666 -# The TCP port on which the Perforce server will listen. -# Possible: any port -# Default: 1666 - -PALMOS_DEFAULT_SDK?= 3.5 -# Version of PalmOS SDK to use as default. -# Possible: 1, 2, 3.1, 3.5 -# Default: 3.5 - -PAPERSIZE?= A4 -# Default paper size for packages. -# Possible: A4, Letter. -# Default: A4 - -PGGROUP?= pgsql -# Used in postgresql package as the groupname of the database -# administrator -# Possible: any group name -# Default: pgsql - -PGUSER?= pgsql -# Used in postgresql package as the username of the database admin -# Possible: any user name -# Default: pgsql - -PGHOME?= ${PREFIX}/${PGUSER} -# Used in postgresql package as the home directory for the database -# administrator -# Possible: any valid location -# Default: ${PREFIX}/${PGUSER} - -PGSQL_USE_HIER?= no -# Add support for hierarchical queries with Oracle like CONNECT BY syntax -# to the PostgreSQL 7.4 package. -# See http://gppl.moonbone.ru/README.html for details. -# Possible: yes, no -# Default: no - -#PG_MB_ENCODING= SQL_ASCII -# Used to postgresql package to define the language encoding of the -# backend server process. -# Possible: SQL_ASCII, EUC_JP, EUC_CN, EUC_KR, EUC_TW, UNICODE, MULE_INTERNAL, -# LATIN1, LATIN2, LATIN3, LATIN4, LATIN5, KOI8, WIN, ALT -# Default: undefined - -PILRC_USE_GTK?= YES -# Use gtk+ in pilrc, needed for the UI previewer. -# Possible: YES, NO -# Default: YES - -#PINFO_USE_NATIVE_CURSES= -# Used in pinfo to use NetBSD native curses, rather than ncurses. -# Only works on NetBSD-1.5 and newer. -# Possible: YES, not defined -# Default: not defined - -PKG_INSTALLATION_TYPES?= overwrite -# This is a whitespace-separated list of installation types supported -# by the package. -# -# *NOTE*: This variable *must* be set in the package Makefile *before* -# the inclusion of bsd.prefs.mk. -# -# Possible: any of: overwrite, pkgviews -# Default: overwrite - -#PKG_JVM= -# Used to choose a java virtual machine for packages which use Java. -# ${JAVA_HOME} will be set based on this choice, if unset -# Possible: jdk, sun-jdk, blackdown-jdk13, kaffe (kaffe currently has some problems) -# Default: jdk on NetBSD/i386, blackdown-jdk13 on powerpc, kaffe elsewhere - -PKG_LANG?=english -# Used to specify preferred language settings -# Currently only used by www/netscape7 and misc/openoffice -# Possible: depends on packages supporting this variable, basically any -# language. Should be '<lang>_<lc>' or '<lang>', for example 'english_uk', -# 'german' or 'portuguese_br'. -# Default: english - -#POPTOP_USE_MPPE= -# Used in poptop package to specify the use of the mppe-ppp package -# in preference to the standard ppp -# Possible: defined, not defined -# Default: not defined - -#CYRUS_USE_INET6=YES -# Add support for IPv6. -# Possible: YES, not defined -# Default: not defined - -PURE_FTPD_USE_MYSQL?= NO -# Compile in MySQL support. -# Possible: YES, NO -# Default: NO - -PURE_FTPD_USE_PGSQL?= NO -# Compile in PostgreSQL support. -# Possible: YES, NO -# Default: NO - -PURE_FTPD_USE_TLS?= NO -# Compile in SSL/TLS support. -# Possible: YES, NO -# Default: NO - -PURE_FTPD_USE_VIRTUAL_CHROOT?= NO -# Compile in virtual chroot support (enables the ability -# to follow symlinks outside a chroot jail). -# Possible: YES, NO -# Default: NO - -#PROCMAIL_MAILSPOOLHOME=.MailBox -# To default user mailboxes to their home directory, -# specify the name of the mailbox file. -# Possible: Any valid filename, not defined -# Default: not defined - -PROCMAIL_TRUSTED_IDS?=0 -# To allow all users to use the "-f" switch set this to 0. -# Possible: A list of users, terminated by a zero. -# Default: see Makefile - -.if exists(/usr/bin/ssh) -PVM_SSH?= /usr/bin/ssh -.else -PVM_SSH?= ${LOCALBASE}/bin/ssh -.endif -# Specify the rsh/ssh program used by pvm to communicate between -# systems. -# Possible: Any rsh/ssh program. -# Default: /usr/bin/ssh if it exists, otherwise ${LOCALBASE}/bin/ssh - -QMAILDIR?= /var/qmail -# The directory for qmail installation. You probably don't need to -# change this. -# Possible: any valid location -# Default: /var/qmail (intentionally not ${VARBASE}/qmail) - -QMAIL_QFILTER_TMPDIR?= ${VARBASE}/tmp/qmail-qfilter -# The temporary directory for qmail-qfilter. -# Possible: a directory writable only by qmail-qfilter's UID -# Default: ${VARBASE}/tmp/qmail-qfilter - -QMAIL_QUEUE_DIR?= ${VARBASE}/spool/qmail -# The directory for qmail's queue. -# Possible: any location on an appropriate filesystem, except that it -# must be outside ${QMAILDIR}. -# Default: ${VARBASE}/spool/qmail - -QMAIL_QUEUE_EXTRA?= -# An additional recipient that will be added to every qmail delivery. -# This is used primarily for logging. -# Possible: empty, any valid local address -# Default: empty - -QPOPPER_FAC?= LOCAL1 -# Used by qpopper package as the default syslog facility. -# Possible: syslog(3)'s facility string without preceding "LOG_". -# Default: LOCAL1 - -QPOPPER_USER?= pop -# Used by qpopper package as the owner of apop database and qpopauth -# command runs at. -# Possible: any -# Default: pop - -#QPOPPER_SERVERMODE= -# Used in qpopper package to enable server mode. -# Possible: defined, not defined -# Default: not defined - -#QPOPPER_SPOOL_DIR= -# Used by qpopper package to define the mail spool directory, -# overriding the hardcoded directories searched for by the configure -# script. -# Possible: any location on an appropriate filesystem. -# Default: not defined - -#QPOPPER_USE_DRAC= -# Used in qpopper package to enable drac support. -# Possible: yes or no, not defined. -# Default: not defined - -RASMOL_DEPTH?= 8 -# Used in rasmol package to choose display depth to compile the package -# for, since it only supports one at a time. -# Possible: 8, 16, 32 -# Default: 8 - -RPM_DB_PREFIX?= ${VARBASE}/pkg -# Used in the rpm package to note the prefix of the path to the RPM -# databases. The RPM databases are stored in ${RPM_DB_PREFIX}/lib/rpm. -# Possible: any valid location, e.g. ${LOCALBASE} -# Default: ${VARBASE}/pkg - -#RSSH_SCP_PATH= -# Used in the rssh package to specify pathname to scp(1) -# Possible: any valid pathname for scp command -# Default: not defined - -#RSSH_SFTP_SERVER_PATH= -# Used in the rssh package to specify pathname to sftp-server(8) -# Possible: any valid pathname for sftp-server command -# Default: not defined - -#RSSH_CVS_PATH= -# Used in the rssh package to specify pathname to cvs(1) -# Possible: any valid pathname for cvs command -# Default: not defined - -#RSSH_RDIST_PATH= -# Used in the rssh package to specify pathname to rdist(1) -# Possible: any valid pathname for rdist command -# Default: not defined - -#RSSH_RSYNC_PATH= -# Used in the rssh package to specify pathname to rsync(1) -# Possible: any valid pathname for rsync command -# Default: not defined - -#SAWFISH_THEMES= -# Specifies the DISTFILES for wm/sawfish-themes, to allow the user to choose -# which themes to install -# Possible: empty, any number of theme-name-[0-9]*.*.tar.gz -# Default: Set to include about 180 themes available on themes.freshmeat.net - -SCREWS_GROUP?= www -# Used in the screws package to specify the user under which the server -# should be run. -# Possible: any user name -# Default: screws - -SCREWS_USER?= screws -# Used in the screws package to specify the user under which the server -# should be run. -# Possible: any user name -# Default: screws - -SDIST_PAWD?= pwd -# If you are using amd you'll want to use pawd instead of pwd to derive -# the current working directory. -# Possible: pawd, pwd -# Default: pwd - -#SERIAL_DEVICES= -# Used to provide a default setting for all the serial devices for -# various packages which communicate over the serial port. -# Possible: /dev/your_favorite_serial_device0 /dev/your_favorite_serial_device1 ... -# Default: defaults for various machine_archs are set in mk/bsd.prefs.mk - -SILC_CLIENT_WITH_PERL?= YES -# Used to decide whether perl scripting support will be compiled. -# Possible: YES, NO -# Default: YES - -#SPARC_TARGET_ARCH= sparcv7 -# Select SPARC target architecture under Solaris. -# Possible: sparcv7, sparcv8 or sparcv9. -# Default: sparcv7 - -#SPOP3D_ENABLE_APOP= yes -# Enable APOP support in the mail/solid-pop3d package. -# Possible: undefined, defined -# Default: undefined - -#SPOP3D_ENABLE_STANDALONE= yes -# Build mail/solid-pop3d to run standalone instead of via inetd. -# Possible: undefined, defined -# Default: undefined - -#SPOP3D_ENABLE_ALIASES= yes -# Build mail/solid-pop3d with support for user names mapping and non-IP -# based virtuals. -# Possible: undefined, defined -# Default: undefined - -#SQUID_CONFIGURE_ARGS= -# Used in squid package to set build configuration options. -# Possible: see "configure --help" -# Default: --enable-cachemgr-hostname=localhost -# --enable-icmp -# --enable-ipf-transparent -# --enable-snmp - -SSH_RSHPATH?= ${RSH} -# Used in ssh to specify standard rsh path -# Possible: path to rsh binary -# Default: platform dependent; ${RSH} set in mk/platform/${OPSYS}.mk - -SSH_SUID?= NO -# Used in ssh to enable setuid installation of "ssh" binary. -# Possible: YES, or NO. -# Default: NO - -SSYNC_PAWD?= pwd -# If you are using amd you'll want to use pawd instead of pwd to derive -# the current working directory. -# Possible: pawd, pwd -# Default: pwd - -SUN_JRE14_USE_JCE?= NO -# Whether to include the Java Cryptography Extension (JCE) Unlimited Strength -# Jurisdiction Policy Files in the sun-jre14 package -# Possible: YES or NO. -# Default: NO - -SUN_JRE15_USE_JCE?= NO -# Whether to include the Java Cryptography Extension (JCE) Unlimited Strength -# Jurisdiction Policy Files in the sun-jre15 package -# Possible: YES or NO. -# Default: NO - -.if empty(MACHINE_PLATFORM:MNetBSD-1*-*) -SUSE_PREFER?= 9.1 -.else -SUSE_PREFER?= 7.3 -.endif -# Which version of the suse packages to prefer. -# Decides if you want to use 9.1 (default) or 7.3 (pre NetBSD-2) by default. -# Possible: 7.3, 9.1 -# Default: 9.1 in 2.0 and later, 7.3 otherwise - -TIN_USE_INN_SPOOL?= NO -# Used to enable reading directly in an inn spool. -# Possible: YES, or NO. -# Default: NO - -#TEXMFSITE= -# Used in TeXfamily package which depends on teTeX package to specify -# site-local texmf configuration. -# Since teTeX package uses ${PREFIX}/share/texmf directory, TeXfamily -# package uses ${PREFIX}/share/texmf.local. Therefore, though you can -# use /usr/local/share/texmf as TEXMFSITE, it causes a conflict if you -# set ${PREFIX} to /usr/local. Use another path in such a case. -# Possible: any valid path -# Default: none - -#THTTPD_LOG_FACILITY?= LOG_DAEMON -# Used by the thttpd package to choose the log facility used -# by thttpd for its syslogd(8) messages. -# Possible: see "facility codes" in /usr/include/syslog.h -# Default: LOG_DAEMON - -TKPASMAN_USE_SSL?= YES -# Enable SSL in tkpasman (to encode stored passwords) -# Possible: YES, NO -# Default: YES - -USE_CANNA?= YES -# Used in kinput2 and nvi-m17n to enable Canna kana-kanji converter -# support. -# Possible: YES, or NO. -# Default: YES - -USE_CRYPTO?= YES -# Used in speakfreely to choose support for encrypted connections. -# Possible: YES, or NO. -# Default: YES - -#USE_CUPS= YES -# Used by packages to compile in support for the UNIX IPP implementation, CUPS. -# Possible: YES, not defined -# Default: not defined - -USE_DB2?= NO -# Used in sendmail to build with database library 2.x from the db package. -# Possible: YES, or NO. -# Default: NO - -USE_ESOUND?= YES -# Whether to compile support for the Enlightened Sound Daemon into packages -# needing audio support. -# Possible: YES, or NO. -# Default: YES - -USE_GIF?= yes -# Enable GIF support in qt1. (disabled per default due to licensing -# problems; future revisions might have no support at all) -# Also used by tiff-library to enable LZW compression support. -# Possible: defined, not defined -# Default: not defined - -USE_I586?= NO -# Use assembler routines optimized for i586 in gnupg. -# Possible: YES, or NO. -# Default: NO - -USE_IDEA?= NO -# Used in gnupg, speakfreely, and ssh to choose whether to compile using -# the patented IDEA encryption algorithm. -# Possible: YES, or NO. -# Default: package-dependent - -#USE_INET6= -# Enable IPv6 support on certain packages. It is safer to leave it undefined -# in mk.conf and obey the default. Reasons: -# - it is just fine to use IPv6-ready packages on top of non-IPv6 kernel -# (assuming that you have IPv6-ready headers and libraries) -# - it may cause some trouble to use a package compiled with USE_INET6=NO, -# on top of IPv6-ready kernel -# Possible: not defined, NO, YES -# Default: YES on IPv6-ready userland, not defined otherwise - -#USE_INN= -# Used in nn and trn to specify use of "inn" instead of "nntpclnt" -# package to provide "inews" binary. -# Possible: not defined, YES -# Default: not defined - -USE_MMX?= NO -# Used in eterm, imlib2, libast, and snes9x to specify if the i386 MMX -# extensions should be used. -# Possible: YES, NO -# Default: NO - -USE_OPENLDAP?= NO -# Enable openldap support. Used in xemacs, gnupg, dovecot, postfix, samba, -# sendmail, sylpheed, pine and others. -# Possible: YES, or NO. -# Default: NO - -#USE_OSS= -# -# Used to enable OSS audio support in preference to or in place of Sun audio -# support in various packages. -# Possible: defined, not defined -# Default: not defined - -#USE_PAM= -# Used to specify optional support for PAM authentication -# Possible: defined, not defined -# Default: not defined - -#USE_SASL=YES -# Used to specify optional support for SASL authentication -# Possible: YES, not defined -# Default: not defined - -#USE_SASL2=YES -# Used to specify optional support for SASL authentication version 2.* -# Possible: YES, not defined -# Default: not defined - -USE_SJ3?= YES -# Used in kinput2 to enable SJ3 kana-kanji converter support. -# Possible: YES, or NO. -# Default: YES - -#USE_SOCKS= -# Used to specify SOCKS firewall support -# Set this to the version of socks necessary. -# Possible: 4, 5, not defined -# Default: not defined - -USE_WNN4?= YES -# Used in kinput2 to enable FreeWnn (a.k.a. Wnn4) kana-kanji -# converter support. -# Possible: YES, or NO. -# Default: YES - -#USE_XFACE= -# Used in xemacs package to build in support for xface -# (pkgsrc/mail/face) -# Possible: not defined, YES -# Default: not defined - -USERPPP_GROUP?= network -# Used in the userppp package to specify the default group. -# Possible: any group name -# Default: network - -VICE_USE_FFMPEG?= no -# Used in vice package to enable ffmpeg support. -# Possible: yes, no. -# Default: no - -#VIM_EXTRA_OPTS= -# Used in vim package to build with non-gui extra options -# Possible: not defined, see "configure --help" -# Default: not defined - -W3M_USE_LYNX_KEY?= NO -# Enable lynx like keybinding for w3m. -# Possible: YES, NO -# Default: NO - -W3M_USE_M17N?= YES -# For multilingual support for w3m. -# Possible: YES, NO -# Default: YES - -W3M_USE_UNICODE?= NO -# Used in w3m to use Unicode characters. -# Possible: YES, NO -# Default: NO - -#WDM_MANAGERS?= -# Is a space-separated list of window managers for x11/wdm to support. -# Possible: any space-separated list of window managers -# Default: not defined - -WINDOWMAKER_OPTIONS?= gnome kde openlook -# Options for building windowmaker package. Used to add support for -# GNOME, KDE or OPEN LOOK(tm) and to avoid redundancies with KDE. -# Possible: gnome, kde, openlook, lite -# Default: gnome kde openlook - -WINDOWMAKER_THEMES?= freebsdtheme-0.52 netbsddrinkingteam-0.60.0 netbsd_-0.52 -# Used in the wmthemes package to specify the themes which will be -# installed. -# Possible: see http://wm.themes.org/ -# Default: freebsdtheme-0.52 netbsddrinkingteam-0.60.0 netbsd_-0.52 - -#X10_PORT= -# The serial device for misc/bottlerocket to use to communicate -# to the X10 adaptor. -# Possible: /dev/your_favorite_serial_device -# Default: defaults to ${DEFAULT_SERIAL_DEVICE} - -WXGTK_USE_GTK1?= NO -# Used in the wxGTK package to request support for GTK+ v1.x instead of v2.x. -# Possible: YES, NO -# Default: NO - -XAW_TYPE?=standard -# Used in various packages to specify that libXaw is used. -# Possible: standard, 3d, xpm -# Default: standard - -XCHAT_USE_SSL?= YES -# Enable SSL in xchat (for IRC server connections) -# Possible: YES, NO -# Default: YES - -XEN12_USE_COM2?= NO -# This option changes Xen's serial console port to com2. -# Possible: YES, NO -# Default: NO - -#XLOCK_DEFAULT_MODE= -# Set the default display (screen saver) mode for xlockmore. -# Possible: ant, apollonian, ball, bat, blank, blot, bomb, bouboule, bounce, -# braid, bubble, bug, clock, coral, crystal, daisy, dclock, decay, -# deco, demon, dilemma, discrete, dragon, drift, euler2d, eyes, -# fadeplot, flag, flame, flow, forest, galaxy, goop, grav, helix, -# hop, hyper, ico, ifs, image, juggle, julia, kaleid, kumppa, laser, -# life, life1d, life3d, lightning, lisa, lissie, loop, lyapunov, -# mandelbrot, marquee, matrix, maze, mountain, munch, nose, pacman, -# penrose, petal, petri, polyominoes, puzzle, pyro, qix, random, -# roll, rotor, scooter, shape, sierpinski, slip, solitare, space, -# sphere, spiral, spline, star, starfish, strange, swarm, swirl, -# t3d, tetris, thornbird, tik_tak, triangle, tube, turtle, vines, -# voters, wator, wire, world, worm, xcl, xjack, not defined -# Default: not defined - -#ZIP_ENCRYPTION= -# Add encryption code to zip1 -# Possible: defined, not defined -# Default: not defined - -#ZSH_STATIC= -# Build statically linked zsh binary - recommended if used as a login shell -# Possible: defined, not defined -# Default: not defined - - -# -# Overrides for faster or cheaper sites. -# -# Refer to http://www.NetBSD.org/mirrors/ or /usr/doc/MIRRORS -# for information on determining the location of NetBSD mirror sites. -# - -# Australia. -# -#MASTER_SITE_CYGWIN= http://planetmirror.com/pub/sourceware/cygwin/ -#MASTER_SITE_GNOME= http://public.planetmirror.com.au/pub/gnome/ -#MASTER_SITE_GNU= http://public.planetmirror.com.au/pub/gnu/ -#MASTER_SITE_MOZILLA= http://public.planetmirror.com.au/pub/mozilla/releases/ -#MASTER_SITE_PERL_CPAN= ftp://mirror.aarnet.edu.au/pub/cpan/modules/by-module/ \ -# http://public.planetmirror.com.au/pub/perl/cpan/modules/by-module/ -#MASTER_SITE_OPENOFFICE=http://openoffice.mirrors.ilisys.com.au/ \ -# http://mirror.pacific.net.au/openoffice/ \ -# http://planetmirror.com/pub/openoffice/ -#MASTER_SITE_SUNSITE= http://public.planetmirror.com.au/pub/sunsite/ -#MASTER_SITE_SUSE= http://public.planetmirror.com.au/pub/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ -#MASTER_SITE_TEX_CTAN= http://public.planetmirror.com.au/pub/tex-archive/ -#MASTER_SITE_SOURCEFORGE=http://optusnet.dl.sourceforge.net/sourceforge/ \ -# http://public.planetmirror.com.au/pub/sourceforge/ -#MASTER_SITE_XCONTRIB= http://public.planetmirror.com.au/pub/X11/contrib/ -#MASTER_SITE_XEMACS= ftp://ftp.au.xemacs.org/pub/xemacs/ -#MASTER_SITE_BACKUP= ftp://ftp.au.NetBSD.org/pub/NetBSD/packages/distfiles/ \ -# ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/ -#MASTER_SITE_LOCAL= ftp://ftp.au.NetBSD.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \ -# ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ -# - -# Austria -# -#MASTER_SITE_CYGWIN= ftp://gd.tuwien.ac.at/gnu/cygwin/ -#MASTER_SITE_XCONTRIB= ftp://ftp.at.NetBSD.org/hci/X11/x.org/contrib/ -#MASTER_SITE_GNU= ftp://ftp.at.NetBSD.org/gnu/gnusrc/ -#MASTER_SITE_PERL_CPAN= ftp://ftp.at.NetBSD.org/languages/perl/CPAN/modules/by-module/ -#MASTER_SITE_OPENOFFICE=http://gd.tuwien.ac.at/office/openoffice/ -#MASTER_SITE_TEX_CTAN= ftp://ftp.at.NetBSD.org/publishing/tex/CTAN/ -#MASTER_SITE_SUNSITE= ftp://ftp.univie.ac.at/systems/linux/sunsite/ -#MASTER_SITE_XEMACS= ftp://ftp.at.xemacs.org/editors/xemacs/ -#MASTER_SITE_BACKUP= ftp://ftp.at.NetBSD.org/opsys/NetBSD/packages/distfiles/ - -# Denmark -# -#MASTER_SITE_CYGWIN= http://mirrors.sunsite.dk/cygwin/ -#MASTER_SITE_GNU= ftp://ftp.sunsite.auc.dk/pub/gnu/ -#MASTER_SITE_PERL_CPAN= ftp://ftp.sunsite.auc.dk/pub/languages/perl/CPAN/modules/by-module/ -#MASTER_SITE_OPENOFFICE=http://mirrors.sunsite.dk/openoffice/ -#MASTER_SITE_TEX_CTAN= ftp://ftp.sunsite.auc.dk/pub/tex/ctan/ -#MASTER_SITE_SUNSITE= ftp://ftp.suaunsite.auc.dk/mirrors/sunsite.unc.edu/pub/Linux/ -#MASTER_SITE_XEMACS= ftp://ftp.dk.xemacs.org/pub/emacs/xemacs/ -#MASTER_SITE_BACKUP= ftp://ftp.dk.NetBSD.org/pub/NetBSD/packages/distfiles/ - -# Finland -# -#MASTER_SITE_CYGWIN= ftp://ftp.funet.fi/pub/mirrors/cygwin.com/pub/cygwin/ -#MASTER_SITE_XCONTRIB= ftp://ftp.funet.fi/pub/X11/contrib/ -#MASTER_SITE_GNU= ftp://ftp.funet.fi/pub/gnu/gnu/ -#MASTER_SITE_PERL_CPAN= \ -# ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/ -#MASTER_SITE_OPENOFFICE=ftp://ftp.funet.fi/pub/mirrors/openoffice.org/ -#MASTER_SITE_TEX_CTAN= ftp://ftp.funet.fi/pub/TeX/CTAN/ -#MASTER_SITE_SUNSITE= \ -# ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/ -#MASTER_SITE_XEMACS= ftp://ftp.fi.xemacs.org/pub/mirrors/ftp.xemacs.org/pub/tux/xemacs/ -#MASTER_SITE_BACKUP= \ -# ftp://ftp.fi.NetBSD.org/pub/NetBSD/packages/distfiles/ - -# France -# -#MASTER_SITE_CYGWIN= http://mir.zyrianes.net/cygwin/ -#MASTER_SITE_OPENOFFICE=ftp://openoffice.cict.fr/openoffice/ \ -# http://ftp.club-internet.fr/pub/OpenOffice/ -#MASTER_SITE_SUSE= \ -# ftp://fr.rpmfind.net/linux/SuSE-Linux/${MACHINE_ARCH}/update/${SUSE_VERSION}/ \ -# ftp://fr2.rpmfind.net/linux/SuSE-Linux/${MACHINE_ARCH}/update/${SUSE_VERSION}/ - -# Greece -# -#MASTER_SITE_CYGWIN= http://ftp.ntua.gr/pub/pc/cygwin/ -#MASTER_SITE_OPENOFFICE=http://www.ellak.gr/pub/openoffice/ \ -# http://ftp.ntua.gr/pub/OpenOffice/ -#MASTER_SITE_SUSE= \ -# ftp://ftp.duth.gr/pub/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ - -# Japan -# -#MASTER_SITE_CYGWIN= ftp://ftp.t.ring.gr.jp/archives/pc/gnu-win32/ -#MASTER_SITE_GNOME= ftp://ftp.t.ring.gr.jp/pub/X/gnome/ -#MASTER_SITE_GNU= ftp://ftp.t.ring.gr.jp/pub/GNU/ -#MASTER_SITE_MOZILLA= ftp://ftp.t.ring.gr.jp/pub/net/www/mozilla/mozilla/releases/ -#MASTER_SITE_PERL_CPAN= ftp://ftp.t.ring.gr.jp/pub/lang/perl/CPAN/modules/by-module/ -#MASTER_SITE_OPENOFFICE=ftp://ftp.kddlabs.co.jp/office/openoffice/ \ -# ftp://ftp.t.ring.gr.jp/pub/misc/openoffice/ -#MASTER_SITE_TEX_CTAN= ftp://ftp.t.ring.gr.jp/pub/text/CTAN/ -#MASTER_SITE_SUSE= \ -# ftp://ftp.kddlabs.co.jp/Linux/packages/SuSE/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ -#MASTER_SITE_SUNSITE= ftp://sunsite.sut.ac.jp/pub/archives/linux/sunsite-unc/ -#MASTER_SITE_XCONTRIB= ftp://ftp.t.ring.gr.jp/pub/X/opengroup/contrib/ -#MASTER_SITE_XEMACS= ftp://ftp.jp.xemacs.org/pub/GNU/xemacs/ -#MASTER_SITE_BACKUP= \ -# ftp://ftp.t.ring.gr.jp/pub/NetBSD/packages/distfiles/ \ -# ftp://ftp.jp.NetBSD.org/pub/NetBSD/packages/distfiles/ - -# Switzerland -# -#MASTER_SITE_CYGWIN= ftp://mirror.switch.ch/mirror/cygwin/ -#MASTER_SITE_OPENOFFICE=ftp://mirror.switch.ch/mirror/OpenOffice/ -#MASTER_SITE_SUSE= \ -# ftp://sunsite.cnlab-switch.ch/mirror/SuSE/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ - -# United Kingdom -# -#MASTER_SITE_CYGWIN= ftp://ftp.mirror.ac.uk/sites/sources.redhat.com/ftp/cygwin/ -#MASTER_SITE_GNU= ftp://sunsite.org.uk/packages/gnu/ -#MASTER_SITE_PERL_CPAN= ftp://sunsite.org.uk/packages/perl/CPAN/modules/by-module/ -#MASTER_SITE_OPENOFFICE=ftp://ftp.mirror.ac.uk/sites/ny1.mirror.openoffice.org/ -#MASTER_SITE_TEX_CTAN= ftp://sunsite.org.uk/packages/tex/uk-tex/ -#MASTER_SITE_SUSE= \ -# ftp://ftp.mirror.ac.uk/sites/ftp.suse.com/pub/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ -#MASTER_SITE_SUNSITE= ftp://sunsite.org.uk/Mirrors/sunsite.unc.edu/pub/Linux/ -#MASTER_SITE_XCONTRIB= ftp://sunsite.org.uk/Mirrors/ftp.x.org/contrib/ -#MASTER_SITE_XEMACS= ftp://ftp.uk.xemacs.org/sites/ftp.xemacs.org/pub/xemacs/ -#MASTER_SITE_BACKUP= \ -# ftp://sunsite.org.uk/packages/NetBSD/packages/distfiles/ \ -# ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/ - -# USA -# -#MASTER_SITE_OPENOFFICE=http://openoffice.behrsolutions.com/ \ -# http://www.ibiblio.org/pub/mirrors/openoffice/ \ -# ftp://ftp.ussg.iu.edu/pub/openoffice/ \ -# http://mirrors.isc.org/pub/openoffice/ \ -# ftp://mirror.telentente.com/pub/OpenOffice/ \ -# http://openoffice.mirrors.pair.com/ -#MASTER_SITE_SUSE= \ -# ftp://mirror.mcs.anl.gov/pub/ftp.suse.com/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ - -# France. This will try to fetch distfile from the distfile mirror -# before trying ${MASTER_SITE} or the distfiles at ftp.NetBSD.org -# -#MASTER_SITE_OVERRIDE= \ -# ftp://ftp2.fr.NetBSD.org/pub/NetBSD/packages/distfiles/ -#MASTER_SITE_BACKUP= \ -# ftp://ftp2.fr.NetBSD.org/pub/NetBSD/packages/distfiles/ -#MASTER_SITE_LOCAL= \ -# ftp://ftp.fr.NetBSD.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ diff --git a/mk/defaults/obsolete.mk b/mk/defaults/obsolete.mk deleted file mode 100644 index 2814db09482..00000000000 --- a/mk/defaults/obsolete.mk +++ /dev/null @@ -1,51 +0,0 @@ -# $NetBSD: obsolete.mk,v 1.2.2.3 2005/05/17 18:29:45 tv Exp $ -# -# This file holds make(1) logic to allow obsolete or deprecated variables -# still to be used. These may eventually disappear over time as the contents -# are, by definition, obsolete and deprecated. - -.if defined(PRIV_CONF_DIR) -PKG_SYSCONFDIR.priv?= ${PRIV_CONF_DIR} -.endif - -### -### Set _PKG_LEGACY_OPTIONS based on to-be-deprecated global variables. -### - -.if defined(KERBEROS) -. if ${KERBEROS} == "4" && !empty(PKG_SUPPORTED_OPTIONS:Mkerberos4) -_PKG_LEGACY_OPTIONS+= kerberos4 -_DEPRECATED_WARNING+="Deprecated variable KERBEROS used, use PKG_DEFAULT_OPTIONS+=kerberos4 instead." -. elif !empty(PKG_SUPPORTED_OPTIONS:Mkerberos) -_PKG_LEGACY_OPTIONS+= kerberos -_DEPRECATED_WARNING+="Deprecated variable KERBEROS used, use PKG_DEFAULT_OPTIONS+=kerberos instead." -. endif -.endif -.if defined(USE_SOCKS) -. if ${USE_SOCKS} == "4" && !empty(PKG_SUPPORTED_OPTIONS:Msocks4) -_PKG_LEGACY_OPTIONS+= socks4 -_DEPRECATED_WARNING+="Deprecated variable SOCKS used, use PKG_DEFAULT_OPTIONS+=socks4 instead." -. elif ${USE_SOCKS} == "5 && !empty(PKG_SUPPORTED_OPTIONS:Msocks5)" -_PKG_LEGACY_OPTIONS+= socks5 -_DEPRECATED_WARNING+="Deprecated variable SOCKS used, use PKG_DEFAULT_OPTIONS+=socks5 instead." -. endif -.endif - -PKG_OPTIONS_LEGACY_VARS+= USE_CANNA:canna -PKG_OPTIONS_LEGACY_VARS+= USE_CUPS:cups -PKG_OPTIONS_LEGACY_VARS+= USE_DB4:db4 -PKG_OPTIONS_LEGACY_VARS+= USE_ESOUND:esound -PKG_OPTIONS_LEGACY_VARS+= USE_GIF:gif -PKG_OPTIONS_LEGACY_VARS+= USE_I586:i586 -PKG_OPTIONS_LEGACY_VARS+= USE_IDEA:idea -PKG_OPTIONS_LEGACY_VARS+= USE_INN:inn -PKG_OPTIONS_LEGACY_VARS+= USE_LIBCRACK:libcrack -PKG_OPTIONS_LEGACY_VARS+= USE_MMX:mmx -PKG_OPTIONS_LEGACY_VARS+= USE_OPENLDAP:ldap -PKG_OPTIONS_LEGACY_VARS+= USE_OSS:oss -PKG_OPTIONS_LEGACY_VARS+= USE_RSAREF2:rsaref -PKG_OPTIONS_LEGACY_VARS+= USE_SASL:sasl -PKG_OPTIONS_LEGACY_VARS+= USE_SASL2:sasl -PKG_OPTIONS_LEGACY_VARS+= USE_SJ3:sj3 -PKG_OPTIONS_LEGACY_VARS+= USE_WNN4:wnn4 -PKG_OPTIONS_LEGACY_VARS+= USE_XFACE:xface diff --git a/mk/defaults/options.description b/mk/defaults/options.description deleted file mode 100644 index f2bbd1b8a4c..00000000000 --- a/mk/defaults/options.description +++ /dev/null @@ -1,242 +0,0 @@ -2ch_dict -a52 -aac -ac3_passthrough -ads -alsa -althash -anthy -antialias -apm -apop -ark -arping1 -arping2 -arts -aspell -ati -audiofile -authlib -avifile -awl-sql-tests -backend-mysql -backend-pgsql -badrcptto -bayes-sql-tests -bdb -bigdns -bktr -bpf -buffy-size -canna -catalog-pgsql -catalog-sqlite -charset -charts -chips -chroot -cirrus -cups -curl -curses -cyrix -darwin -db -db2 -db4 -debug -domainscale -drac -dummy -dynamic -eb -edit -esound Enable support for Enlightment Sound Daemon. -faac -faad -fam -ffmpeg -flac -freetype -frontend-fastcgi -frontend-modperl1 -frontend-modperl2 -gd -gdbm -gdk-pixbuf -glib1 -glint -glpk -gnome -gnupg -gnuplot -gnutls -gpgsm -graphs -gsasl -gssapi -gstreamer -gtk -gtkfe -gucharmap -hdf5 -homedir -hpn-patch -hub -i128 -i586-optimized -i740 -i810 -iconv -id3 -idea -ifevents -ignoreip2 -imlib -imlib2 -imstt -inet6 -ipfilter -iptables -ipv6 -ispell -java -jpeg -jpilot -kde -kerberos -kerberos4 -kqueue -krb4 -krb5 -lame -largefile -largescale -ldap -ldap-compat -leaf -libcrack -libgcrypt -libnet10 -libnet11 -long-usernames -lookup -lua -lynxkey -lzw -m17n -m68060-optimized -mad -magick -mdc2 -metarefresh -mga -mhash -milter -mmx -modperl -multibyte -mysql -mysql4 -native -ncurses -neomagic -net-tests -netqmail -newport -nogui -nospoof -nsc -nullenvsender -nv -ogg -okinawa_dict -opengl Use OpenGL as display library. -openldap -openssl -outgoingip -pam -patchviewer -pcre -perf-tuning -perl -perl-taint-checks -perl-warnings -pf -pgsql -plplot -portals -postgresql -postgresql73 -postgresql74 -prefix-cmds -python -qregex -qt -quota -radius -rc5 -readline -realrcptto -recommended-db -remoteinc -rendition -rrdtool -s3 -s3virge -samba -sasl -savage -sdl Use SDL as display library. -siliconmotion -sis -skey -slang -slp -snmp -socketmap -socks -socks4 -socks5 -sqlite -ssl -starttls -static -subshell -suexec -svn -syncdir -tcpd -tcpwrappers -tdb -tdfx -tga -tinydns64 -tls -trident -truetype -tseng -unicode -unrealircd -vesa -vflib -vfs -vga -via -virtualchroot -viruscan -vmware -vorbis -vpop -wrap -wx -x11 -xface -xft -xft2 -xmlimportbugs -xmms-eq -xvid -zaptel -zip -ziplinks |