| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
iperf-3.12 2022-09-30
---------------------
* Notable user-visible changes
* cJSON has been updated to version 1.7.15
* The --bind <host>%<dev> option syntax now works properly
* A server-side file descriptor leak with the --logfile option has
been fixed
* A bug that caused some large values from TCP_INFO to be misprinted
as negative numbers has been fixed
* Using the -k or -n flags with --reverse no longer leak into future
tests
* There are now various debug level options available with the
--debug option. These can be used to adjust the amount of
debugging output
* A new --snd-timeout option has been added to set a termination
timeout for idle TCP connections
* iperf3 is slightly more robust to out-of-order packets during UDP
connection setup in --reverse mode
* iperf3 will now use different ports for each direction when the
--cport and --bdir options are set
* The iperf3 server will now exit if it can't open its log file
* Various help message and output fixes have been made
* Various compiler warnings have been fixed
* Developer-visible changes
* Operation of bootstrap.sh has been fixed and simplified
* Flow label support / compatibility under Linux has been improved
* Various minor memory leaks have been fixed
* A getter/setter has been added for the bind_port parameter
(--cport option).
* Various internal documentation improvements
|
|
iperf-3.11
----------
* Notable user-visible changes
* Update links to Discussions in documentation
* Fix DSCP so that TOS = DSCP * 4
* Fix --bind-dev for TCP streams
* Fix interface specification so doesn't overlap with IPv6 link-local addresses for -c and -B
* Add get/set test_unit_format function declaration to iperf_api.h
* Auto adjustment of test-end condition for file transfers (-F), if no end condition is set, it will automatically adjust it to file size in bytes
* Exit if idle time expires waiting for a connection in one-off mode
* Support zerocopy by reverse mode
* Update help and manpage text for 1157, support bind device
* Consistently print target_bandwidth in JSON start section
* Test bitrate added to JSON output
* Remove fsync call after every write to receiving --file
* Update documentation for -w
* Fix for 952, different JSON object names for bidir reverse channel
|
|
All checksums have been double-checked against existing RMD160 and
SHA512 hashes
Not committed (merge conflicts...):
net/radsecproxy/distinfo
The following distfiles could not be fetched (fetched conditionally?):
./net/citrix_ica/distinfo citrix_ica-10.6.115659/en.linuxx86.tar.gz
./net/djbdns/distinfo dnscache-1.05-multiple-ip.patch
./net/djbdns/distinfo djbdns-1.05-test28.diff.xz
./net/djbdns/distinfo djbdns-1.05-ignoreip2.patch
./net/djbdns/distinfo djbdns-1.05-multiip.diff
./net/djbdns/distinfo djbdns-cachestats.patch
|
|
|
|
iperf-3.10.1 2021-06-03
-----------------------
* Notable user-visible changes
* Fixed a problem with autoconf scripts that made builds fail in
some environments.
* Developer-visible changes
* GNU autoconf 2.71 or newer is now required to regenerate iperf3's
configure scripts.
|
|
iperf 3.10 2021-05-26
---------------------
* Notable user-visible changes
* Fix a bug where some --reverse tests didn't terminate.
* Responsiveness of control connections is slightly improved.
* The allowable clock skew when doing authentication between client
and server is now configurable with the new --time-skew-threshold.
* Bitrate throttling using the -b option now works when a burst size
is specified.
* A bug with calculating CPU utilization has been fixed.
* A --bind-dev option to support binding sockets to a given network
interface has been added to make iperf3 work better with
multi-homed machines and/or VRFs.
* --pidfile now works with --client mode.
* The server is now less likely to get stuck due to network errors
controlled by the new --rcv-timeout option.
* Fixed a few bugs in termination conditions for byte or
block-limited tests.
* Added tcp_info.snd_wnd to JSON output.
* Some bugs with garbled JSON output have been fixed.
* Support for setting the IPv4 don't-fragment (DF) bit has been
added with the new --dont-fragment option.
* A failure with not being able to read the congestion control
algorithm under WSL1 has been fixed.
* Error handling and error messages now make more sense in cases
where sockets were not successfully opened.
* Some buffer overflow hazards were fixed.
* Notable developer-visible changes
* It is now possible to use the API to set/get the congestion
control algorithm.
|
|
(as discussed on pkgsrc-users)
|
|
iperf 3.9
* Notable user-visible changes
* A --timestamps flag has been added, which prepends a timestamp to
each output line. An optional argument to this flag, which is a
format specification to strftime(3), allows for custom timestamp
formats.
* A --server-bitrate-limit flag has been added as a server-side
command-line argument. It allows a server to enforce a maximum
throughput rate; client connections that specify a higher bitrate
or exceed this bitrate during a test will be terminated. The
bitrate is expressed in bits per second, with an optional trailing
slash and integer count that specifies an averaging interval over
which to enforce the limit.
* A bug that caused increased CPU usage with the --bidir option has
been fixed.
* Notable developer-visible changes
* Fixed various minor memory leaks.
|
|
iperf 3.8.1 2020-06-10
----------------------
* Notable user-visible changes
* A regression with "make install", where the libiperf shared
library files were not getting installed, has been fixed.
iperf 3.8 2020-06-08
--------------------
* Notable user-visible changes
* Profiled libraries and binaries are no longer built by default.
* A minimal Dockerfile has been added.
* A bug with burst mode and unlimited rate has been fixed
* Configuring with the --enable-static-bin flag will now cause
a statically-linked iperf3 binary to be built.
* Configuring with the --without-sctp flag will now prevent SCTP
from being auto-detected. This flag allows building a
static binary (see above item) on a CentOS system with SCTP
installed, because no static SCTP libraries are available.
* Clock skew between the iperf3 client and server will no longer
skew the computation of jitter during UDP tests.
* A possible buffer overflow in the authentication feature has been
fixed. This was only relevant when configuration authentication
using the libiperf3 API, and did not affect command-line usage.
Various other improvements and fixes in this area were also made.
* Notable developer-visible changes
* The embedded version of cJSON has been updated to 1.3.17.
* Some server authentication functions have been added to the API.
* API access has been added to the connection timeout parameter.
* Tests for some authentication functions have been added.
* Various compiler errors and warnings have been fixed.
|
|
pkglint -r --network --only "migrate"
As a side-effect of migrating the homepages, pkglint also fixed a few
indentations in unrelated lines. These and the new homepages have been
checked manually.
|
|
|
|
3.7:
iperf 3.6 adds the --bidir flag for bidirectional tests, includes some minor enhancements, and fixes a number of bugs. More details can be found in the release notes.
Note: Documentation for the --bidir flag was inadvertently omitted from the manual page. This will be fixed in a future release.
3.6:
iperf 3.6 adds the --extra-data and --repeating-payload options and fixes some minor bugs.
3.5:
iperf 3.5 fixes a bug that could over-count data transfers (and hence measured bitrate).
3.4:
iperf 3.4 fixes a number of minor bugs and adds a few enhancements.
3.3:
New minor release of iperf 3.3, fixing a number of minor bugs.
3.2:
New minor release of iperf 3.2, with new features, bugfixes, and enhancements.
|
|
|
|
fixes and new functionality, made since iperf 3.1.5.
* User-visible changes
* Specifying --fq-rate or --no-fq-socket-pacing on a system where
these options are not supported now generate an error instead of a
warning. This change makes diagnosing issues related to pacing
more apparent.
* Fixed a bug where two recently-added diagnostic messages spammed
the JSON output on UDP tests.
|
|
Problems found with existing digests:
Package haproxy distfile haproxy-1.5.14.tar.gz
159f5beb8fdc6b8059ae51b53dc935d91c0fb51f [recorded]
da39a3ee5e6b4b0d3255bfef95601890afd80709 [calculated]
Problems found locating distfiles:
Package bsddip: missing distfile bsddip-1.02.tar.Z
Package citrix_ica: missing distfile citrix_ica-10.6.115659/en.linuxx86.tar.gz
Package djbdns: missing distfile djbdns-1.05-test25.diff.bz2
Package djbdns: missing distfile djbdns-cachestats.patch
Package djbdns: missing distfile 0002-dnscache-cache-soa-records.patch
Package gated: missing distfile gated-3-5-11.tar.gz
Package owncloudclient: missing distfile owncloudclient-2.0.2.tar.xz
Package poink: missing distfile poink-1.6.tar.gz
Package ra-rtsp-proxy: missing distfile rtspd-src-1.0.0.0.tar.gz
Package ucspi-ssl: missing distfile ucspi-ssl-0.70-ucspitls-0.1.patch
Package waste: missing distfile waste-source.tar.gz
Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden). All existing
SHA1 digests retained for now as an audit trail.
|
|
|
|
congestion window on each test interval.
Also fix the FreeBSD version to do the same (wrong variable
in the tcp_info struct was used...).
Bump PKGREVISION.
|
|
Iperf3 is a tool for active measurements of the maximum achievable
bandwidth on IP networks. It supports tuning of various parameters
related to timing, protocols, and buffers. For each test it reports
the bandwidth, loss, and other parameters.
This version, sometimes referred to as iperf3, is a redesign of an
original version developed at NLANR/DAST. iperf3 is a new
implementation from scratch, with the goal of a smaller, simpler code
base, and a library version of the functionality that can be used in
other programs. Iperf3 also has a number of features found in other tools
such as nuttcp and netperf, but were missing from the original iperf.
These include, for example, a zero-copy mode and optional JSON output.
Note that iperf3 is NOT backwards compatible with the original iperf.
|
