path: root/net/hf6to4/files/hf6to4.8

.\"     $NetBSD: hf6to4.8,v 1.5 2007/10/07 12:59:14 kano Exp $
.\"
.\" Copyright (c) 2000-2005 Hubert Feyrer <hubert@feyrer.de>.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"      This product includes software developed by Hubert Feyrer for
.\"      the NetBSD Project.
.\" 4. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd May 31, 2005
.Dt hf6to4 8
.Os
.Sh NAME
.Nm hf6to4
.Nd setup automatic 6to4 IPv6 tunnelling
.Sh SYNOPSIS
.Nm
.Op Fl vn
.Ar command
.Sh DESCRIPTION
The
.Nm
script can be used to setup IPv6 on your home machine and
network for exploring IPv6 without any registrations. 6to4 is a
mechanism by which your IPv6 address(es) are derived from an assigned
IPv4 address, and which involves automatic tunnelling to one or more
remove 6to4 relay routers, which will then forward your v6 packets on the 6bone.
Replies are routed back to you over IPv4 via (possibly) other
6to4 relay routers. As such, IPv6-in-IPv4-encapsulated
packets are accepted from all v4-hosts. See
.Xr stf 4
for security discussion.
.Pp
From your (single) IPv4 address, you get a whole IPv6 /48 network,
which allows you to split your network in 2^16 subnets, with 2^64
hosts each. You need to setup routing for your internal network
properly, help is provided for setting up the border router here.
.Pp
This script takes the burden to calculate your IPv6 address from
existing IPv4 address and runs the commands to setup (and tear down)
automatic 6to4 IPv6 tunnelling. In a separate step, router
advertisement for the inside network can be started and stopped.
.Pp
Possible options are:
.Bl -tag -width xxx
.It Fl n
Do not. Only print the commands that would be run, but do not execute
them.
.It Fl v
Verbose operation. Print the commands that are about to be run, before
running them. Displays some additional information.
.It Fl h
Show usage.
.El
.Pp
Possible commands are:
.Bl -tag -width rtadvd-start
.It Sy start
Same as
.Sy stf-start .
.It Sy stop
Same as
.Sy stf-stop .
.It Sy stf-start
Configure 6to4 IPv6. The
.Xr stf 4
interface is configured, and a default route to a remote 6to4
gateway is established. In addition, the internal
network interface is assigned an address.
.It Sy stf-stop
Stops 6to4 IPv6. All addresses are removed from the
.Xr stf 4
device, and the default route is removed. If
.Sy in_if
is set, the 6to4 addresses are removed from that interface too.
.It Sy rtadvd-start
Starts router advertizement and IPv6 packet forwarding,
turning the machine into a IPv6 router.
Clients just need to be told to accept router advertizements, i.e.
the
.Sq net.inet6.ip6.accept_rtadv
sysctl needs to be set to
.Sq 1 .
On NetBSD, you can arrange that by setting
.Dq ip6mode=autohost
in
.Pa /etc/rc.conf .
.It Sy rtadvd-stop
Stops router advertizement and IPv6 packet forwarding.
.Xr rtadvd 8
is stopped.
.El
.Sh REQUIREMENTS
Besides IPv4 connectivity, you need support for IPv6 and the
.Xr stf 4
device in your kernel. While the GENERIC
.Nx
1.5 kernel does support IPv6, it does not contain support for the
.Xr stf 4
device.
.Pp
Make sure you have the following options in your kernel config file:
.Bd -literal -offset
options         INET		# IP + ICMP + TCP + UDP
options         INET6           # IPV6
pseudo-device	stf	1	# 6to4 IPv6 over IPv4 encapsulation
.Ed
.Pp
In systems that run past-1.5,
you will have to explicitly create an
.Xr stf 4
device after compiling it in the kernel. You do this by running
the following command before calling the
.Nm
script:
.Bd -literal -offset
ifconfig stf0 create
.Ed
As an alternative, you can also put the following lines into
.Pa /etc/rc.conf :
.Bd -literal -offset
net_interfaces="stf0"
ifconfig_stf0="create"
.Ed
.Pp
See also the comment on setting up IPv6-clients
.Sq behind
your 6to4 router for the
.Sy rtadvd-start
command!
.Sh CONFIGURATION
The
.Nm
script reads its configuration from a config file named
.Pa hf6to4.conf .
The
.Pa hf6to4.conf
file is in
.Xr sh 1
syntax, and contains several
variables that can be tuned to adjust your setup. Default values
should work for use on a modem/DSL dialup.
.Bl -tag -width rtadvd-stop
.It Sy out_if
The outbound interface that has a valid IPv4 address
assigned, that can be used to derive the IPv6
addresses from. Usually
.Dq ppp0
for a modem setup, or your ethernet interface if you have
IPv4 connectivity via LAN. This
can't be empty, and is assigned the IPv6 address
2002:x:x:v6_net:hostbits6, see below.
.It Sy in_if
The inside interface. If non-empty, this interface is
assigned the IPv6 address
2002:x:x:v6_innernet:hostbits6, see below.
This is only useful on machines that
have more than one network interfaces, e.g. with a modem and a
local ethernet.
.It Sy v6_net
The subnet address you want to use on the address of
your outbound interface. Defaults to
.Dq 1 .
.It Sy v6_innernet
The subnet address you want to use on the address of
your inbound interface. Defaults to
.Dq 2 .
.It Sy hostbits6
The lower 64 bits of both the inbound and outbound interface's
addresses.
.It Sy peer
Name of the remote 6to4 server that'll take our
IPv6-in-IPv4 encapsulated packets and route them on
via IPv6. A special value of
.Dq 6to4-anycast
can be used for the anycast service defined in RFC 3068.
Other possible values are given in the example config file.
.It Sy remoteadr4, remoteadr6
If the
.Sy peer
variable is set to the relay router's name, DNS lookups for A and AAAA
records will be made to
determine its IPv4 and IPv6 address.  To avoid these lookups, the variables
.Sy remoteadr4
and
.Sy remoteadr6
can be set to strings containing the numerical IPv4 and IPv6 numbers
directly.
.El
.Sh EXAMPLES
The
.Nm
script can be run automatically by
.Xr pppd 8
when a connection is made. For this, put the following into
.Pa /etc/ppp/ip-up :
.Bd -literal -offset
( /usr/pkg/sbin/hf6to4 stf-stop
  /usr/pkg/sbin/hf6to4 stf-start
  /usr/pkg/sbin/hf6to4 rtadvd-stop
  /usr/pkg/sbin/hf6to4 rtadvd-start ) &
.Ed
.Pp
To shut down properly, put this into
.Pa /etc/ppp/ip-down :
.Bd -literal -offset
/usr/pkg/sbin/hf6to4 stf-stop
/usr/pkg/sbin/hf6to4 rtadvd-stop
.Ed
.Sh SEE ALSO
.Xr stf 4 ,
.Dq 6to4 IPv6 Explained
at
.Pa http://www.feyrer.de/NetBSD/6to4.html ,
.Nx
IPv6 Documentation at
.Pa http://www.netbsd.org/docs/network/ipv6/ ,
RFC 3068.
.Sh HISTORY
The
.Nm
utility and manpage were written by
Hubert Feyrer <hubert@feyrer.de>.
.Pp
The utility was initially written in perl and called
.Dq 6to4
but later rewritten as shell script and renamed to a name different
than the protocol it configures to emphasize the difference
between the protocol (6to4) and the implementation (hf6to4).
.Pp
The older (perl) version is also shipped by Apple with versions
10.3 and 10.4 (and probably newer) of their MacOS X operating system. 
.Sh BUGS
On systems running past-1.5, the
.Dq ifconfig stf0 create
should be run automatically.
.Pp
Might be good to use /etc/rc.d/rtadvd for rtadvd handling.