Debian 3.9.10debian/3.9.10debian

1 files changed, 167 insertions, 0 deletions

diff --git a/qa/159.out.1 b/qa/159.out.1
new file mode 100644
index 0000000..f0a170a
--- /dev/null
+++ b/qa/159.out.1
@@ -0,0 +1,167 @@
+QA output created by 159
+
+=== remove agent ===
+Culling the Performance Metrics Name Space ...
+cisco ... done
+Updating the PMCD control file, and notifying PMCD ...
+Removing files ...
+Check cisco metrics have gone away ... OK
+Error: cisco: Unknown metric name
+
+=== install agent ===
+You will need to choose an appropriate configuration for installation of
+the "cisco" Performance Metrics Domain Agent (PMDA).
+
+  collector	collect performance statistics on this system
+  monitor	allow this system to monitor local and/or remote systems
+  both		collector and monitor configuration for this system
+
+Please enter c(ollector) or m(onitor) or b(oth) [b] 
+
+Cisco hostname or IP address? [return to quit Cisco selection] 
+A user-level password may be required for the Cisco "show interface" command.
+    If you are unsure, try the command
+	$ telnet melbourne-l0.wan.sgi.com
+    and if the prompt "Password:" appears, a user-level password is required,
+    otherwise respond with an empty line for the next question.
+
+User-level Cisco password? Probing Cisco for list of interfaces ...
+
+Enter interfaces to monitor, one per line in the format tX where "t" is
+a type and one of "e" (Ethernet), "E" (FastEthernet), "f" (Fddi), "s"
+(Serial), "a" (ATM), "B" (ISDN BRI) or "h" (HSSC) and "X" is an
+interface identifier which is either an integer (e.g.  4000 Series
+routers) or two integers separated by a slash (e.g. 7000 Series
+routers).
+
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+Cisco hostname or IP address? [return to quit Cisco selection] 
+A user-level password may be required for the Cisco "show interface" command.
+    If you are unsure, try the command
+	$ telnet melbourne-l0.wan.sgi.com
+    and if the prompt "Password:" appears, a user-level password is required,
+    otherwise respond with an empty line for the next question.
+
+User-level Cisco password? Probing Cisco for list of interfaces ...
+
+Enter interfaces to monitor, one per line in the format tX where "t" is
+a type and one of "e" (Ethernet), "E" (FastEthernet), "f" (Fddi), "s"
+(Serial), "a" (ATM), "B" (ISDN BRI) or "h" (HSSC) and "X" is an
+interface identifier which is either an integer (e.g.  4000 Series
+routers) or two integers separated by a slash (e.g. 7000 Series
+routers).
+
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+Cisco hostname or IP address? [return to quit Cisco selection] Updating the Performance Metrics Name Space (PMNS) ...
+Compiled PMNS contains
+  NNN hash table entries
+  NNN leaf nodes
+  NNN non-leaf nodes
+  NNN bytes of symbol table
+Terminate PMDA if already installed ...
+Installing files ...
+Updating the PMCD control file, and notifying PMCD ...
+Wait 20 seconds for the cisco agent to initialize ...
+Check cisco metrics have appeared ... 5 metrics and SOME values
+
+=== re-install agent ===
+You will need to choose an appropriate configuration for installation of
+the "cisco" Performance Metrics Domain Agent (PMDA).
+
+  collector	collect performance statistics on this system
+  monitor	allow this system to monitor local and/or remote systems
+  both		collector and monitor configuration for this system
+
+Please enter c(ollector) or m(onitor) or b(oth) [b] 
+
+Cisco hostname or IP address? [return to quit Cisco selection] 
+A user-level password may be required for the Cisco "show interface" command.
+    If you are unsure, try the command
+	$ telnet melbourne-l0.wan.sgi.com
+    and if the prompt "Password:" appears, a user-level password is required,
+    otherwise respond with an empty line for the next question.
+
+User-level Cisco password? Probing Cisco for list of interfaces ...
+
+Enter interfaces to monitor, one per line in the format tX where "t" is
+a type and one of "e" (Ethernet), "E" (FastEthernet), "f" (Fddi), "s"
+(Serial), "a" (ATM), "B" (ISDN BRI) or "h" (HSSC) and "X" is an
+interface identifier which is either an integer (e.g.  4000 Series
+routers) or two integers separated by a slash (e.g. 7000 Series
+routers).
+
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+Cisco hostname or IP address? [return to quit Cisco selection] 
+A user-level password may be required for the Cisco "show interface" command.
+    If you are unsure, try the command
+	$ telnet melbourne-l0.wan.sgi.com
+    and if the prompt "Password:" appears, a user-level password is required,
+    otherwise respond with an empty line for the next question.
+
+User-level Cisco password? Probing Cisco for list of interfaces ...
+
+Enter interfaces to monitor, one per line in the format tX where "t" is
+a type and one of "e" (Ethernet), "E" (FastEthernet), "f" (Fddi), "s"
+(Serial), "a" (ATM), "B" (ISDN BRI) or "h" (HSSC) and "X" is an
+interface identifier which is either an integer (e.g.  4000 Series
+routers) or two integers separated by a slash (e.g. 7000 Series
+routers).
+
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+The currently unselected interfaces for the Cisco "melbourne-l0.wan.sgi.com" are:
+<interfaces>
+
+Enter "*" to select all, "quit" to terminate selections for this Cisco.
+Interface? [e0/0] 
+Cisco hostname or IP address? [return to quit Cisco selection] Updating the Performance Metrics Name Space (PMNS) ...
+Compiled PMNS contains
+  NNN hash table entries
+  NNN leaf nodes
+  NNN non-leaf nodes
+  NNN bytes of symbol table
+Terminate PMDA if already installed ...
+Installing files ...
+Updating the PMCD control file, and notifying PMCD ...
+Wait 20 seconds for the cisco agent to initialize ...
+Check cisco metrics have appeared ... 5 metrics and SOME values