diff options
Diffstat (limited to 'qa/interact/chart-control-testcases')
| -rw-r--r-- | qa/interact/chart-control-testcases | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/qa/interact/chart-control-testcases b/qa/interact/chart-control-testcases new file mode 100644 index 0000000..4ce56db --- /dev/null +++ b/qa/interact/chart-control-testcases @@ -0,0 +1,101 @@ +Chart Correctness and Control +============================= + +Live mode + +[ ] Run: pmchart -c views/ScaleManual -t 1 + This should display two charts - the top one with instantaneous + sample metrics (sample.double.one and sample.double.ten), lower + chart with one counter metric (sample.byte_ctr). + +[ ] Select the top chart, open the Edit Chart dialog, disable Auto- + Scaling on the Y-Axis. Set Minimum to zero, Maximum to 12, + and press OK. Verify that the Y-Axis increases to this range. +[ ] Repeat the above, except now set the Maximum to 5. Verify that + the Y-Axis updates to show the new maximum and that only the + yellow chart (sample.double.one) remains visible. +[ ] Repeat once more, now setting Minimum to 5 and Maximum to 15. + Verify the Y-Axis scale change and that only the blue plot + (sample.double.ten) is now visible. + +[ ] Click the Live button to expose the Time Controls. Press the + Stop button. Wait 5 seconds, then press Play. +[ ] Verify that there is a "gap" in all chart data (not zero) for + the time stopped, then it should continue to plot as before. + +[ ] Change the Interval to 0 seconds, and then press Play. + Verify that the Interval returns back to its previous valid + state and the charts are updated as before. +[ ] Change the Interval to 1.5 seconds, and then press Play. + Verify that the time pulse is emitted now every two seconds + and that the display is updated at that frequency now. + +[ ] Change the Timezone to UTC in the Time Control dialog. + Verify that the position text is updated with the new time, + and that the pmchart time axis is updated also. +[ ] Change back to localtime, verify position and time axis again. + +[ ] Run: pmchart -c CPU -L -t 0.025 +[ ] This should be updating extremely frequently, and depending on + the capabilities of your hardware will either keep up beautifully + (wow, nice machine!) or frequently miss updates (this is the case + with my laptop). To increase the probability that deltas will be + missed, wiggle the cursor around over the CPU chart, which makes + pmchart do more work. When updates are missed pmchart must plot + a blank section in the chart, but then it should continue on with + normal plotting. + + +Archive mode + +[ ] Run: pmchart -c views/ScaleManual -t 1 -a archives/chartqa1 + This should display two charts - the top one with instantaneous + sample metrics (sample.double.one and sample.double.ten), lower + chart with one counter metric (sample.byte_ctr). The initial + display should show a series of values for Thurs, Oct 11 2007, + with one visible "gap" in the series (both charts, same time). + +[ ] Click the Archive button to expose the Time Controls. +[ ] Press Play, and let it run through to the end of the archive + (its not very long). There should be two time periods where + no values are displayed (note: plotting should stop completely + in these sections - broken lines, the plot values should *not* + dip to zero). +[ ] Verify that when the end of the archive is reached, the time + controls are updated to Stop state, in both the Time Control + window and pmchart. +[ ] Press Back, and let it run back to the start of the archive. + Verify that when the start of the archive is reached, time + controls are updated to Stop state in both the Time Control + window and pmchart. +[ ] Change the Archive Control mode to Step, then take three steps + forward, and four steps back. Verify that the time controls + are update to Stop state in both the Time Control window and + pmchart. +[ ] Change the Archive Control mode to Fast. Fast forward to the + end of the archive, verify it stops at the end, then fast back + to the start. Again verify that it stops, and the interface + state (icons) in both windows is updated to indicate this. +[ ] Change back to Normal Archive Control mode. Press Play. Now + increase and decrease the playback Speed while pmchart is + displaying the data from the archive. Use both the direct + text input mechanism, and the wheel. You can use the little + button next to the wheel to reset Speed to its original value. +[ ] Play space invaders! Randomly change mode, direction, speed, + etc. and verify that the interface doesn't get into a hung or + unexpected state. + +[ ] Change the Interval to 0 seconds, and then press Play. + Verify that the Interval returns back to its previous valid + state and the charts are updated as before. +[ ] Change the Interval to 1.5 seconds, and then press Play. + Verify that the time pulse is emitted now every two seconds + and that the display is updated at that frequency now. + +[ ] Change the Timezone to UTC in the Time Control dialog. + Verify that the position text is updated with the new time, + and that the pmchart time axis is updated also. Also verify + that the Archive Bounds dialog displays an updated timeframe. +[ ] Change back to localtime from the archive; verify position, + time axis and Archive Bounds again. + |