Upstream tarball 2.2.3upstream/2.2.3

1 files changed, 212 insertions, 0 deletions

diff --git a/buildconf b/buildconf
new file mode 100755
index 00000000..6a50c169
--- /dev/null
+++ b/buildconf
@@ -0,0 +1,212 @@
+#!/bin/sh
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# buildconf: Build the support scripts needed to compile from a
+#            checked-out version of the source code.
+
+# set a couple of defaults for where we should be looking for our support libs.
+# can be overridden with --with-apr=[dir] and --with-apr-util=[dir]
+
+apr_src_dir="srclib/apr ../apr"
+apu_src_dir="srclib/apr-util ../apr-util"
+
+while test $# -gt 0 
+do
+  # Normalize
+  case "$1" in
+  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  case "$1" in
+  --with-apr=*)
+  apr_src_dir=$optarg
+  ;;
+  esac
+
+  case "$1" in
+  --with-apr-util=*)
+  apu_src_dir=$optarg
+  ;;
+  esac
+
+  shift
+done
+
+#
+# Check to be sure that we have the srclib dependencies checked-out
+#
+
+should_exit=0
+apr_found=0
+apu_found=0
+
+for dir in $apr_src_dir
+do
+    if [ -f "${dir}/build/apr_common.m4" ]; then
+        echo "found apr source: ${dir}"
+        apr_src_dir=$dir
+        apr_found=1
+        break
+    fi
+done
+
+if [ $apr_found -lt 1 ]; then
+    echo ""
+    echo "You don't have a copy of the apr source in srclib/apr. "
+    echo "Please get the source using the following instructions," 
+    echo "or specify the location of the source with " 
+    echo "--with-apr=[path to apr] :"
+    echo ""
+    echo "   svn co http://svn.apache.org/repos/asf/apr/apr/trunk srclib/apr"
+    echo ""
+    should_exit=1
+fi
+
+for dir in $apu_src_dir
+do
+    if [ -f "${dir}/Makefile.in" ]; then
+        echo "found apr-util source: ${dir}"
+        apu_src_dir=$dir
+        apu_found=1
+        break
+    fi
+done
+
+if [ $apu_found -lt 1 ]; then
+    echo ""
+    echo "You don't have a copy of the apr-util source in srclib/apr-util. "
+    echo "Please get one the source using the following instructions, "
+    echo "or specify the location of the source with "
+    echo "--with-apr-util=[path to apr-util]:"
+    echo ""
+    echo "   svn co http://svn.apache.org/repos/asf/apr/apr-util/trunk srclib/apr-util"
+    echo ""
+    should_exit=1
+fi
+
+if [ $should_exit -gt 0 ]; then
+    exit 1
+fi
+
+# These are temporary until Roy finishes the other build changes
+#
+touch .deps
+rm -f aclocal.m4
+rm -f generated_lists
+rm -f srclib/pcre/aclocal.m4
+
+# Remove autoconf 2.5x cache directories
+rm -rf autom4te*.cache srclib/pcre/autom4te*.cache
+
+case "`uname`" in
+*BSD/OS*)
+    ./build/bsd_makefile;;
+esac
+#
+# end temporary stuff
+
+apr_configure="$apr_src_dir/configure"
+aprutil_configure="$apu_src_dir/configure"
+pcre_configure="srclib/pcre/configure"
+config_h_in="include/ap_config_auto.h.in"
+
+cross_compile_warning="warning: AC_TRY_RUN called without default to allow cross compiling"
+
+if [ "$apr_src_dir" = "srclib/apr" ]; then
+    echo rebuilding $apr_configure
+    (cd srclib/apr && ./buildconf) || {
+        echo "./buildconf failed for apr"
+        exit 1
+    }
+    rm -f srclib/apr/apr.spec
+fi
+
+apr_src_dir=`cd $apr_src_dir && pwd` 
+
+if [ "$apu_src_dir" = "srclib/apr-util" ]; then
+    echo rebuilding $aprutil_configure
+    (cd srclib/apr-util && ./buildconf --with-apr=$apr_src_dir) || {
+        echo "./buildconf failed for apr-util" 
+        exit 1
+    }
+    rm -f srclib/apr-util/apr-util.spec
+fi
+
+apu_src_dir=`cd $apu_src_dir && pwd` 
+
+echo copying build files
+cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \
+   $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \
+   $apr_src_dir/build/find_apr.m4 $apu_src_dir/build/find_apu.m4 build
+
+# Remove any libtool files so one can switch between libtool 1.3
+# and libtool 1.4 by simply rerunning the buildconf script.
+(cd build ; rm -f ltconfig ltmain.sh)
+
+# Optionally copy libtool-1.3.x files
+if [ -f $apr_src_dir/build/ltconfig ]; then
+    cp $apr_src_dir/build/ltconfig build
+fi
+if [ -f $apr_src_dir/build/ltmain.sh ]; then
+    cp $apr_src_dir/build/ltmain.sh build
+fi
+
+echo rebuilding $pcre_configure
+(cd srclib/pcre && ${AUTOCONF:-autoconf})
+
+echo rebuilding $config_h_in
+rm -f $config_h_in
+${AUTOHEADER:-autoheader} 2>&1 | grep -v "$cross_compile_warning"
+
+echo rebuilding configure
+rm -f config.cache
+${AUTOCONF:-autoconf} 2>&1 | grep -v "$cross_compile_warning"
+
+# Remove autoconf 2.5x cache directories
+rm -rf autom4te*.cache srclib/pcre/autom4te*.cache
+
+if [ -f `which cut` ]; then
+  echo rebuilding rpm spec file
+  ( VMMN=`build/get-version.sh mmn include/ap_mmn.h MODULE_MAGIC_NUMBER`
+    REVISION=`build/get-version.sh all include/ap_release.h AP_SERVER`
+    VERSION=`echo $REVISION | cut -d- -s -f1`
+    RELEASE=`echo $REVISION | cut -d- -s -f2`
+    if [ "x$VERSION" = "x" ]; then
+      VERSION=$REVISION
+      RELEASE=1
+    fi
+    cat ./build/rpm/httpd.spec.in | \
+    sed -e "s/APACHE_VERSION/$VERSION/" \
+        -e "s/APACHE_RELEASE/$RELEASE/" \
+        -e "s/APACHE_MMN/$VMMN/" \
+    > httpd.spec )
+fi
+
+# ensure that the mod_ssl expression parser sources are never regenerated
+# when running make
+echo fixing timestamps for mod_ssl sources
+cd modules/ssl
+touch ssl_expr_parse.y
+sleep 1
+touch ssl_expr_parse.c ssl_expr_parse.h ssl_expr_scan.l
+sleep 1
+touch ssl_expr_scan.c
+cd ../..
+
+exit 0