diff options
Diffstat (limited to 'doc/config')
34 files changed, 0 insertions, 3073 deletions
diff --git a/doc/config/Makefile.am b/doc/config/Makefile.am deleted file mode 100644 index 57bf101..0000000 --- a/doc/config/Makefile.am +++ /dev/null @@ -1,2 +0,0 @@ -SUBDIRS=conf.d vhosts.d -EXTRA_DIST=lighttpd.conf modules.conf diff --git a/doc/config/Makefile.in b/doc/config/Makefile.in deleted file mode 100644 index 869a407..0000000 --- a/doc/config/Makefile.in +++ /dev/null @@ -1,604 +0,0 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = doc/config -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ATTR_LIB = @ATTR_LIB@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BZ_LIB = @BZ_LIB@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CRYPT_LIB = @CRYPT_LIB@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DL_LIB = @DL_LIB@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FAM_CFLAGS = @FAM_CFLAGS@ -FAM_LIBS = @FAM_LIBS@ -FGREP = @FGREP@ -GDBM_LIB = @GDBM_LIB@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LBER_LIB = @LBER_LIB@ -LD = @LD@ -LDAP_LIB = @LDAP_LIB@ -LDFLAGS = @LDFLAGS@ -LIBEV_CFLAGS = @LIBEV_CFLAGS@ -LIBEV_LIBS = @LIBEV_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LUA_CFLAGS = @LUA_CFLAGS@ -LUA_LIBS = @LUA_LIBS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MEMCACHE_LIB = @MEMCACHE_LIB@ -MKDIR_P = @MKDIR_P@ -MYSQL_CONFIG = @MYSQL_CONFIG@ -MYSQL_INCLUDE = @MYSQL_INCLUDE@ -MYSQL_LIBS = @MYSQL_LIBS@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PCRECONFIG = @PCRECONFIG@ -PCRE_LIB = @PCRE_LIB@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SED = @SED@ -SENDFILE_LIB = @SENDFILE_LIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SQLITE_CFLAGS = @SQLITE_CFLAGS@ -SQLITE_LIBS = @SQLITE_LIBS@ -SSL_LIB = @SSL_LIB@ -STRIP = @STRIP@ -U = @U@ -UUID_LIBS = @UUID_LIBS@ -VERSION = @VERSION@ -XML_CFLAGS = @XML_CFLAGS@ -XML_LIBS = @XML_LIBS@ -Z_LIB = @Z_LIB@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = conf.d vhosts.d -EXTRA_DIST = lighttpd.conf modules.conf -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/config/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/config/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/doc/config/conf.d/Makefile.am b/doc/config/conf.d/Makefile.am deleted file mode 100644 index 165c17e..0000000 --- a/doc/config/conf.d/Makefile.am +++ /dev/null @@ -1,25 +0,0 @@ -EXTRA_DIST=access_log.conf \ - auth.conf \ - cgi.conf \ - cml.conf \ - compress.conf \ - debug.conf \ - dirlisting.conf \ - evhost.conf \ - expire.conf \ - fastcgi.conf \ - geoip.conf \ - magnet.conf \ - mime.conf \ - mod.template \ - mysql_vhost.conf \ - proxy.conf \ - rrdtool.conf \ - scgi.conf \ - secdownload.conf \ - simple_vhost.conf \ - ssi.conf \ - status.conf \ - trigger_b4_dl.conf \ - userdir.conf \ - webdav.conf diff --git a/doc/config/conf.d/Makefile.in b/doc/config/conf.d/Makefile.in deleted file mode 100644 index 1b3fc95..0000000 --- a/doc/config/conf.d/Makefile.in +++ /dev/null @@ -1,426 +0,0 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = doc/config/conf.d -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ATTR_LIB = @ATTR_LIB@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BZ_LIB = @BZ_LIB@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CRYPT_LIB = @CRYPT_LIB@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DL_LIB = @DL_LIB@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FAM_CFLAGS = @FAM_CFLAGS@ -FAM_LIBS = @FAM_LIBS@ -FGREP = @FGREP@ -GDBM_LIB = @GDBM_LIB@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LBER_LIB = @LBER_LIB@ -LD = @LD@ -LDAP_LIB = @LDAP_LIB@ -LDFLAGS = @LDFLAGS@ -LIBEV_CFLAGS = @LIBEV_CFLAGS@ -LIBEV_LIBS = @LIBEV_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LUA_CFLAGS = @LUA_CFLAGS@ -LUA_LIBS = @LUA_LIBS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MEMCACHE_LIB = @MEMCACHE_LIB@ -MKDIR_P = @MKDIR_P@ -MYSQL_CONFIG = @MYSQL_CONFIG@ -MYSQL_INCLUDE = @MYSQL_INCLUDE@ -MYSQL_LIBS = @MYSQL_LIBS@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PCRECONFIG = @PCRECONFIG@ -PCRE_LIB = @PCRE_LIB@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SED = @SED@ -SENDFILE_LIB = @SENDFILE_LIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SQLITE_CFLAGS = @SQLITE_CFLAGS@ -SQLITE_LIBS = @SQLITE_LIBS@ -SSL_LIB = @SSL_LIB@ -STRIP = @STRIP@ -U = @U@ -UUID_LIBS = @UUID_LIBS@ -VERSION = @VERSION@ -XML_CFLAGS = @XML_CFLAGS@ -XML_LIBS = @XML_LIBS@ -Z_LIB = @Z_LIB@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = access_log.conf \ - auth.conf \ - cgi.conf \ - cml.conf \ - compress.conf \ - debug.conf \ - dirlisting.conf \ - evhost.conf \ - expire.conf \ - fastcgi.conf \ - geoip.conf \ - magnet.conf \ - mime.conf \ - mod.template \ - mysql_vhost.conf \ - proxy.conf \ - rrdtool.conf \ - scgi.conf \ - secdownload.conf \ - simple_vhost.conf \ - ssi.conf \ - status.conf \ - trigger_b4_dl.conf \ - userdir.conf \ - webdav.conf - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/config/conf.d/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/config/conf.d/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/doc/config/conf.d/access_log.conf b/doc/config/conf.d/access_log.conf deleted file mode 100644 index 6c1e7e3..0000000 --- a/doc/config/conf.d/access_log.conf +++ /dev/null @@ -1,27 +0,0 @@ -####################################################################### -## -## Corresponding documentation: -## -## http://www.lighttpd.net/documentation/access.html -## -server.modules += ( "mod_accesslog" ) - -## -## Default access log. -## -accesslog.filename = log_root + "/access.log" - -## -## The default format produces CLF compatible output. -## For available parameters see access.txt -## -#accesslog.format = "%h %l %u %t \"%r\" %b %>s \"%{User-Agent}i\" \"%{Referer}i\"" - -## -## If you want to log to syslog you have to unset the -## accesslog.use-syslog setting and uncomment the next line. -## -#accesslog.use-syslog = "enable" - -# -####################################################################### diff --git a/doc/config/conf.d/auth.conf b/doc/config/conf.d/auth.conf deleted file mode 100644 index 1d3d69c..0000000 --- a/doc/config/conf.d/auth.conf +++ /dev/null @@ -1,27 +0,0 @@ -####################################################################### -## -## Authentication Module -## ----------------------- -## -## See http://www.lighttpd.net/documentation/authentification.html -## for more info. -## - -#auth.backend = "plain" -#auth.backend.plain.userfile = "/etc/lighttpd/lighttpd.user" -#auth.backend.plain.groupfile = "/etc/lighttpd/lighttpd.group" - -#auth.backend.ldap.hostname = "localhost" -#auth.backend.ldap.base-dn = "dc=my-domain,dc=com" -#auth.backend.ldap.filter = "(uid=$)" - -#auth.require = ( "/server-status" => -# ( -# "method" => "digest", -# "realm" => "Server Status", -# "require" => "valid-user" -# ), -# ) - -## -####################################################################### diff --git a/doc/config/conf.d/cgi.conf b/doc/config/conf.d/cgi.conf deleted file mode 100644 index ed27799..0000000 --- a/doc/config/conf.d/cgi.conf +++ /dev/null @@ -1,33 +0,0 @@ -####################################################################### -## -## CGI modules -## --------------- -## -## http://www.lighttpd.net/documentation/cgi.html -## -server.modules += ( "mod_cgi" ) - -## -## Plain old CGI handling -## -## For PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini. -## -cgi.assign = ( ".pl" => "/usr/bin/perl", - ".cgi" => "/usr/bin/perl", - ".rb" => "/usr/bin/ruby", - ".erb" => "/usr/bin/eruby", - ".py" => "/usr/bin/python" ) - -## -## to get the old cgi-bin behavior of apache -## -## Note: make sure that mod_alias is loaded if you uncomment the -## next line. (see modules.conf) -## -#alias.url += ( "/cgi-bin" => server_root + "/cgi-bin" ) -#$HTTP["url"] =~ "^/cgi-bin" { -# cgi.assign = ( "" => "" ) -#} - -## -####################################################################### diff --git a/doc/config/conf.d/cml.conf b/doc/config/conf.d/cml.conf deleted file mode 100644 index 8054ea6..0000000 --- a/doc/config/conf.d/cml.conf +++ /dev/null @@ -1,27 +0,0 @@ -####################################################################### -## -## CML Module -## --------------- -## -## see http://www.lighttpd.net/documentation/cml.html -## -server.modules += ( "mod_cml" ) -index-file.names += ( "index.cml" ) - -## -## The file extension that is bound to the cml-module. -## -cml.extension = ".cml" - -## -## Memcached hosts used for memcache* functions. -## -#cml.memcache-hosts = ( "127.0.0.1:11211" ) - -## -## A cml file that is executed for each request. -## -#cml.power-magnet = server_root + "/htdocs/powermagnet.cml" - -## -####################################################################### diff --git a/doc/config/conf.d/compress.conf b/doc/config/conf.d/compress.conf deleted file mode 100644 index 8ea4248..0000000 --- a/doc/config/conf.d/compress.conf +++ /dev/null @@ -1,31 +0,0 @@ -####################################################################### -## -## Output Compression -## -------------------- -## -## see http://www.lighttpd.net/documentation/compress.html -## -server.modules += ( "mod_compress" ) - -## -## where should the compressed files be cached? -## see the base config for the declaration of the variable. -## -## This directory should be changed per vhost otherwise you can -## run into trouble with overlapping filenames -## -compress.cache-dir = cache_dir + "/compress" - -## -## FileTypes to compress. -## -compress.filetype = ("text/plain", "text/html") - -## -## Maximum filesize that will be compressed. -## Default is 0, which means unlimited file size. -## -#compress.max-filesize = 0 - -## -####################################################################### diff --git a/doc/config/conf.d/debug.conf b/doc/config/conf.d/debug.conf deleted file mode 100644 index 80bbea0..0000000 --- a/doc/config/conf.d/debug.conf +++ /dev/null @@ -1,47 +0,0 @@ -####################################################################### -## -## Debug options -## --------------- -## -## Enable those options for debugging the behavior -## -## The settings can be set per location/vhost. -## - -## -## log-request-handling allows you to track the request -## handing inside lighttpd. -## -#debug.log-request-handling = "enable" - -## -## log all request headers. -## -#debug.log-request-header = "enable" - -## -## similar to log-request-header. -## but only logs if we encountered an error. -## (return codes 400 and 5xx) -## -#debug.log-request-header-on-error = "enable" - -## -## log the header we send out to the client. -## -#debug.log-response-header = "enable" - -## -## log if a file wasnt found in the error log. -## -#debug.log-file-not-found = "enable" - -## -## debug conditionals handling -## -#debug.log-condition-handling = "enable" - -# -####################################################################### - - diff --git a/doc/config/conf.d/dirlisting.conf b/doc/config/conf.d/dirlisting.conf deleted file mode 100644 index 53a18a2..0000000 --- a/doc/config/conf.d/dirlisting.conf +++ /dev/null @@ -1,55 +0,0 @@ -####################################################################### -## -## Dirlisting Module -## ------------------- -## -## See http://www.lighttpd.net/documentation/dirlisting.html -## - -## -## Enabled Directory listing -## -dir-listing.activate = "disable" - -## -## Hide dot files from the listing? -## By default they are listed. -## -dir-listing.hide-dotfiles = "disable" - -## -## list of regular expressions. Files that match any of the specified -## regular expressions will be excluded from directory listings. -## -dir-listing.exclude = ( "~$" ) - -## -## set a encoding for the generated directory listing -## -## If you file-system is not using ASCII you have to set the encoding of -## the filenames as they are put into the HTML listing AS IS (with XML -## encoding) -## -dir-listing.encoding = "UTF-8" - -## -## Specify the url to an optional CSS file. -## -#dir-listing.external-css = "/dirindex.css" - -## -## Include HEADER.txt files above the directory listing. -## You can disable showing the HEADER.txt in the listing. -## -dir-listing.hide-header-file = "disable" -dir-listing.show-header = "disable" - -## -## Include README.txt files above the directory listing. -## You can disable showing the README.txt in the listing. -## -dir-listing.hide-readme-file = "disable" -dir-listing.show-readme = "disable" - -## -####################################################################### diff --git a/doc/config/conf.d/evhost.conf b/doc/config/conf.d/evhost.conf deleted file mode 100644 index 6da89c1..0000000 --- a/doc/config/conf.d/evhost.conf +++ /dev/null @@ -1,22 +0,0 @@ -####################################################################### -## -## Enhanced virtual hosting -## -------------------------- -## -## See http://www.lighttpd.net/documentation/evhost.html -## -server.modules += ( "mod_evhost" ) - -## -## define a pattern for the host url finding -## %% => % sign -## %0 => domain name + tld -## %1 => tld -## %2 => domain name without tld -## %3 => subdomain 1 name -## %4 => subdomain 2 name -## -evhost.path-pattern = vhosts_dir + "/%3/htdocs/" - -## -####################################################################### diff --git a/doc/config/conf.d/expire.conf b/doc/config/conf.d/expire.conf deleted file mode 100644 index 0ca0ab2..0000000 --- a/doc/config/conf.d/expire.conf +++ /dev/null @@ -1,22 +0,0 @@ -####################################################################### -## -## Expire Module -## --------------- -## -## See http://www.lighttpd.net/documentation/expire.html -## -server.modules += ( "mod_expire" ) - -## -## assignes a expiration to all files below the specified path. The -## specification of the time is made up of: -## -## <access|modification> <number> <years|months|days|hours|minutes|seconds> -## -#expire.url = ( -# "/buggy/" => "access 2 hours", -# "/images/" => "access plus 1 seconds 2 minutes" -#) - -## -####################################################################### diff --git a/doc/config/conf.d/fastcgi.conf b/doc/config/conf.d/fastcgi.conf deleted file mode 100644 index 49cff62..0000000 --- a/doc/config/conf.d/fastcgi.conf +++ /dev/null @@ -1,135 +0,0 @@ -####################################################################### -## -## FastCGI Module -## --------------- -## -## http://www.lighttpd.net/documentation/fastcgi.html -## -server.modules += ( "mod_fastcgi" ) - -## -## PHP Example -## For PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini. -## -## The number of php processes you will get can be easily calculated: -## -## num-procs = max-procs * ( 1 + PHP_FCGI_CHILDREN ) -## -## for the php-num-procs example it means you will get 17*5 = 85 php -## processes. you always should need this high number for your very -## busy sites. And if you have a lot of RAM. :) -## -#fastcgi.server = ( ".php" => -# ( "php-local" => -# ( -# "socket" => socket_dir + "/php-fastcgi-1.socket", -# "bin-path" => server_root + "/cgi-bin/php5", -# "max-procs" => 1, -# "broken-scriptfilename" => "enable", -# ) -# ), -# ( "php-tcp" => -# ( -# "host" => "127.0.0.1", -# "port" => 9999, -# "check-local" => "disable", -# "broken-scriptfilename" => "enable", -# ) -# ), -# -# ( "php-num-procs" => -# ( -# "socket" => socket_dir + "/php-fastcgi-2.socket", -# "bin-path" => server_root + "/cgi-bin/php5", -# "bin-environment" => ( -# "PHP_FCGI_CHILDREN" => "16", -# "PHP_FCGI_MAX_REQUESTS" => "10000", -# ), -# "max-procs" => 5, -# "broken-scriptfilename" => "enable", -# ) -# ), -# ) - -## -## Ruby on Rails Example -## -## Normally you only run one Rails application on one vhost. -## -#$HTTP["host"] == "rails1.example.com" { -# server.document-root = server_root + "/rails/someapp/public" -# server.error-handler-404 = "/dispatch.fcgi" -# fastcgi.server = ( ".fcgi" => -# ("someapp" => -# ( "socket" => socket_dir + "/someapp-fcgi.socket", -# "bin-path" => server_root + "/rails/someapp/public/dispatch.fcgi", -# "bin-environment" => ( -# "RAILS_ENV" => "production", -# "TMP" => home_dir + "/rails/someapp", -# ), -# ) -# ) -# ) -#} - -## -## Another example with multiple rails applications on one vhost. -## -## http://blog.lighttpd.net/articles/2005/11/23/lighttpd-1-4-8-and-multiple-rails-apps -## -#$HTTP["host"] == "rails2.example.com" { -# $HTTP["url"] =~ "^/someapp1" { -# server.document-root = server_root + "/rails/someapp1/public" -# server.error-handler-404 = "/dispatch.fcgi" -# fastcgi.server = ( ".fcgi" => -# ("someapp1" => -# ( "socket" => socket_dir + "/someapp1-fcgi.socket", -# "bin-path" => server_root + "/rails/someapp1/public/dispatch.fcgi", -# "bin-environment" => ( -# "RAILS_ENV" => "production", -# "TMP" => home_dir + "/rails/someapp1", -# ), -# "strip-request-uri" => "/someapp1/" -# ) -# ) -# ) -# } -# -# $HTTP["url"] =~ "^/someapp2" { -# server.document-root = server_root + "/rails/someapp2/public" -# server.error-handler-404 = "/dispatch.fcgi" -# fastcgi.server = ( ".fcgi" => -# ("someapp2" => -# ( "socket" => socket_dir + "/someapp2-fcgi.socket", -# "bin-path" => server_root + "/rails/someapp2/public/dispatch.fcgi", -# "bin-environment" => ( -# "RAILS_ENV" => "production", -# "TMP" => home_dir + "/rails/someapp2", -# ), -# "strip-request-uri" => "/someapp2/" -# ) -# ) -# ) -# } -#} - -## chrooted webserver + external PHP -## -## $ spawn-fcgi -f /usr/bin/php-cgi -p 2000 -a 127.0.0.1 -C 8 -## -## webserver chrooted to /srv/www/ -## php running outside the chroot -# -#fastcgi.server = ( -# ".php" => (( -# "host" => "127.0.0.1", -# "port" => "2000", -# "docroot" => "/srv/www/servers/www.example.org/htdocs/" -# ))) -# -#server.chroot = "/srv/www" -#server.document-root = "/servers/wwww.example.org/htdocs/" -# - -## -####################################################################### diff --git a/doc/config/conf.d/geoip.conf b/doc/config/conf.d/geoip.conf deleted file mode 100644 index 5b5b28b..0000000 --- a/doc/config/conf.d/geoip.conf +++ /dev/null @@ -1,26 +0,0 @@ -####################################################################### -## -## GeoIP Module -## --------------- -## -## mod_geoip is a module for fast ip/location lookups. It uses MaxMind -## GeoIP / GeoCity databases. If the ip was found in the database the -## module sets the appropriate environments variables to the request, -## thus making other modules/fcgi be informed. -## -server.modules += ( "mod_geoip" ) - -## -## mod_geoip will determine the database type automatically so if you -## enter GeoCity databse path it will load GeoCity Env. -## -#geoip.db-filename = "/path/to/GeoCityLite.dat" - -## -## If enabled, mod_geoip will load the database binary file to memory -## for very fast lookups. The only penalty is memory usage. -## -#geoip.memory-cache = "disable" - -## -####################################################################### diff --git a/doc/config/conf.d/magnet.conf b/doc/config/conf.d/magnet.conf deleted file mode 100644 index 1ebf529..0000000 --- a/doc/config/conf.d/magnet.conf +++ /dev/null @@ -1,22 +0,0 @@ -####################################################################### -## -## Magnet Module -## --------------- -## -## see http://trac.lighttpd.net/trac/wiki/Docs%3AModMagnet -## -server.modules += ( "mod_magnet" ) - -## -## -## -#magnet.attract-raw-url-to = ( ) - -## -## as an example for that see the mod_magnet docs and -## http://pixel.global-banlist.de./ -## -#magnet.attract-physical-path-to = ( conf_dir + "/cleanurl.lua" ) - -## -####################################################################### diff --git a/doc/config/conf.d/mime.conf b/doc/config/conf.d/mime.conf deleted file mode 100644 index a3c6f0c..0000000 --- a/doc/config/conf.d/mime.conf +++ /dev/null @@ -1,77 +0,0 @@ -####################################################################### -## -## MimeType handling -## ------------------- -## -## http://www.lighttpd.net/documentation/configuration.html#mimetypes -## -## Use the "Content-Type" extended attribute to obtain mime type if -## possible -## -mimetype.use-xattr = "disable" - -## -## mimetype mapping -## -mimetype.assign = ( - ".pdf" => "application/pdf", - ".sig" => "application/pgp-signature", - ".spl" => "application/futuresplash", - ".class" => "application/octet-stream", - ".ps" => "application/postscript", - ".torrent" => "application/x-bittorrent", - ".dvi" => "application/x-dvi", - ".gz" => "application/x-gzip", - ".pac" => "application/x-ns-proxy-autoconfig", - ".swf" => "application/x-shockwave-flash", - ".tar.gz" => "application/x-tgz", - ".tgz" => "application/x-tgz", - ".tar" => "application/x-tar", - ".zip" => "application/zip", - ".mp3" => "audio/mpeg", - ".m3u" => "audio/x-mpegurl", - ".wma" => "audio/x-ms-wma", - ".wax" => "audio/x-ms-wax", - ".ogg" => "application/ogg", - ".wav" => "audio/x-wav", - ".gif" => "image/gif", - ".jpg" => "image/jpeg", - ".jpeg" => "image/jpeg", - ".png" => "image/png", - ".xbm" => "image/x-xbitmap", - ".xpm" => "image/x-xpixmap", - ".xwd" => "image/x-xwindowdump", - ".css" => "text/css", - ".html" => "text/html", - ".htm" => "text/html", - ".js" => "text/javascript", - ".asc" => "text/plain", - ".c" => "text/plain", - ".cpp" => "text/plain", - ".log" => "text/plain", - ".conf" => "text/plain", - ".text" => "text/plain", - ".txt" => "text/plain", - ".spec" => "text/plain", - ".dtd" => "text/xml", - ".xml" => "text/xml", - ".mpeg" => "video/mpeg", - ".mpg" => "video/mpeg", - ".mov" => "video/quicktime", - ".qt" => "video/quicktime", - ".avi" => "video/x-msvideo", - ".asf" => "video/x-ms-asf", - ".asx" => "video/x-ms-asf", - ".wmv" => "video/x-ms-wmv", - ".bz2" => "application/x-bzip", - ".tbz" => "application/x-bzip-compressed-tar", - ".tar.bz2" => "application/x-bzip-compressed-tar", - ".rpm" => "application/x-rpm", - # make the default mime type application/octet-stream. - "" => "application/octet-stream", - ) - - -# -####################################################################### - diff --git a/doc/config/conf.d/mod.template b/doc/config/conf.d/mod.template deleted file mode 100644 index fcfdac4..0000000 --- a/doc/config/conf.d/mod.template +++ /dev/null @@ -1,16 +0,0 @@ -####################################################################### -## -## Foo Module -## --------------- -## -## http://www.lighttpd.net/documentation/Foo.html -## -server.modules += ( "mod_Foo" ) - -## -## foo -## -#foo.bar = 1 - -## -####################################################################### diff --git a/doc/config/conf.d/mysql_vhost.conf b/doc/config/conf.d/mysql_vhost.conf deleted file mode 100644 index 63550c4..0000000 --- a/doc/config/conf.d/mysql_vhost.conf +++ /dev/null @@ -1,47 +0,0 @@ -####################################################################### -## -## Virtual hosting with MySQL -## ---------------------------- -## -## http://www.lighttpd.net/documentation/mysqlvhost.html -## -server.modules += ( "mod_mysql_vhost" ) - -## -## Either set the the socket or host (and port) -## -## Local path to the mysql socket -## -#mysql-vhost.sock = "/var/lib/mysql/mysql.sock" - -## -## Host of the MySQL server. -## -#mysql-vhost.hostname = "localhost" - -## -## Optional: port to use. -## -#mysql-vhost.port = 3306 - -## -## Name of the database -## -mysql-vhost.db = "lighttpd" - -## -## SQL User/Password for the connection -## -mysql-vhost.user = "lighttpd" -mysql-vhost.pass = "secret" - -## -## The query to get the needed informations from the database. -## -## It doesnt matter how you name the fields the first field is always used -## as the document root. -## -mysql-vhost.sql = "SELECT docroot FROM domains WHERE domain='?'" - -## -####################################################################### diff --git a/doc/config/conf.d/proxy.conf b/doc/config/conf.d/proxy.conf deleted file mode 100644 index f0552c2..0000000 --- a/doc/config/conf.d/proxy.conf +++ /dev/null @@ -1,35 +0,0 @@ -####################################################################### -## -## Proxy Module -## --------------- -## -## http://www.lighttpd.net/documentation/proxy.html -## -server.modules += ( "mod_proxy" ) - -## -## a value between 0 and 65535 to set the debug-level in the Proxy module. -## Currently only 0 and 1 are used. Use 1 to enable some debug output, 0 to -## disable it. -## -#proxy.debug = 1 - -## -## might be one of 'hash', 'round-robin' or 'fair' (default). -## -#proxy.balance = "fair" - -## -## Handle all jsp requests via 192.168.0.101 -## -#proxy.server = ( ".jsp" => -# ( "tomcat" => -# ( -# "host" => "192.168.0.101", -# "port" => 80 -# ) -# ) -# ) - -## -####################################################################### diff --git a/doc/config/conf.d/rrdtool.conf b/doc/config/conf.d/rrdtool.conf deleted file mode 100644 index c29013b..0000000 --- a/doc/config/conf.d/rrdtool.conf +++ /dev/null @@ -1,21 +0,0 @@ -####################################################################### -## -## RRD Tool Module -## ----------------- -## -## see http://www.lighttpd.net/documentation/rrdtool.html -## -server.modules += ( "mod_rrdtool" ) - -## -## Path to the rrdtool binary. -## -rrdtool.binary = "/usr/bin/rrdtool" - -## -## Path to the rrdtool database. You can override this in conditionals. -## -rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" - -## -####################################################################### diff --git a/doc/config/conf.d/scgi.conf b/doc/config/conf.d/scgi.conf deleted file mode 100644 index 3fcf280..0000000 --- a/doc/config/conf.d/scgi.conf +++ /dev/null @@ -1,51 +0,0 @@ -####################################################################### -## -## FastCGI Module -## --------------- -## -## http://www.lighttpd.net/documentation/scgi.html -## -server.modules += ( "mod_scgi" ) - -## -## Ruby on Rails Example -## -## Normally you only run one Rails application on one vhost. -## -#$HTTP["host"] == "rails1.example.com" { -# server.document-root = server_root + "/rails/someapp/public" -# server.error-handler-404 = "/dispatch.fcgi" -# scgi.server = ( ".scgi" => -# ("scgi-someapp" => -# ( "socket" => socket_dir + "/someapp-scgi.socket", -# "bin-path" => server_root + "/rails/someapp/public/dispatch.scgi", -# "bin-environment" => ( -# "RAILS_ENV" => "production", -# "TMP" => home_dir + "/rails/someapp", -# ), -# ) -# ) -# ) -#} - -## -## 2nd Ruby on Rails Example -## -## This time we launch the rails application via scgi_rails externally. -## -#$HTTP["host"] == "rails2.example.com" { -# server.document-root = server_root + "/rails/someapp/public" -# server.error-handler-404 = "/dispatch.scgi" -# scgi.server = ( ".scgi" => -# ( "scgi-tcp" => -# ( -# "host" => "127.0.0.1", -# "port" => 9998, -# "check-local" => "disable", -# ) -# ) -# ) -#} - -## -####################################################################### diff --git a/doc/config/conf.d/secdownload.conf b/doc/config/conf.d/secdownload.conf deleted file mode 100644 index 2d4d11a..0000000 --- a/doc/config/conf.d/secdownload.conf +++ /dev/null @@ -1,35 +0,0 @@ -####################################################################### -## -## Secure Download Module -## ------------------------ -## -## see http://www.lighttpd.net/documentation/secdownload.html -## -server.modules += ( "mod_secdownload" ) - -## -## Document root for the download area. -## The directory should not be below your normal -## document root! -## -#secdownload.document-root = server_root + "/downloads" - -## -## Secret string that will be used for the checksum calculation. -## -#secdownload.secret = "" - -## -## How long is the secret valid? -## -## Default: 60 seconds -## -#secdownload.timeout = 60 - -## -## Prefix for the download area. -## -#secdownload.uri-prefix = "/download/" - -## -####################################################################### diff --git a/doc/config/conf.d/simple_vhost.conf b/doc/config/conf.d/simple_vhost.conf deleted file mode 100644 index 220331e..0000000 --- a/doc/config/conf.d/simple_vhost.conf +++ /dev/null @@ -1,28 +0,0 @@ -####################################################################### -## -## Simple Virtual hosting -## ------------------------ -## -## http://www.lighttpd.net/documentation/simple-vhost.html -## -server.modules += ( "mod_simple_vhost" ) - -## If you want name-based virtual hosting add the next three settings and load -## mod_simple_vhost -## -## document-root = -## virtual-server-root + virtual-server-default-host + virtual-server-docroot -## or -## virtual-server-root + http-host + virtual-server-docroot -## -simple-vhost.server-root = vhosts_dir + "/" -simple-vhost.default-host = "default.example.com" -simple-vhost.document-root = "/htdocs/" - -## -## Print some errors for finding the document-root -## -#simple-vhost.debug = "enable" - -## -####################################################################### diff --git a/doc/config/conf.d/ssi.conf b/doc/config/conf.d/ssi.conf deleted file mode 100644 index a82d1a5..0000000 --- a/doc/config/conf.d/ssi.conf +++ /dev/null @@ -1,16 +0,0 @@ -####################################################################### -## -## Server Side Includes -## ----------------------- -## -## see /usr/share/doc/packages/lighttpd/ssi.html -## -server.modules += ( "mod_ssi" ) - -## -## which extensions should be ran through mod_ssi. -## -ssi.extension = ( ".shtml" ) - -## -####################################################################### diff --git a/doc/config/conf.d/status.conf b/doc/config/conf.d/status.conf deleted file mode 100644 index 946939f..0000000 --- a/doc/config/conf.d/status.conf +++ /dev/null @@ -1,24 +0,0 @@ -####################################################################### -## -## Status Module -## --------------- -## -## see http://www.lighttpd.net/documentation/status.html -## -server.modules += ( "mod_status" ) - -$HTTP["remoteip"] == "127.0.0.0/8" { -## -## configure urls for the various parts of the module. -## - status.status-url = "/server-status" - status.config-url = "/server-config" - status.statistics-url = "/server-statistics" -## -## add JavaScript which allows client-side sorting for the connection -## overview -## - status.enable-sort = "enable" -} -## -####################################################################### diff --git a/doc/config/conf.d/trigger_b4_dl.conf b/doc/config/conf.d/trigger_b4_dl.conf deleted file mode 100644 index 1efd3fd..0000000 --- a/doc/config/conf.d/trigger_b4_dl.conf +++ /dev/null @@ -1,70 +0,0 @@ -####################################################################### -## -## Trigger before download -## --------------- -## -## - if user requests ''download-url'' directly, the request is denied -## and he is redirected to ''deny-url' -## - if user visits ''trigger-url'' before requesting ''download-url'', -## access is granted -## - if user visits ''download-url'' again after ''trigger-timeout'' has -## elapsed, the request is denied and he is redirected to ''deny-url'' -## -## http://www.lighttpd.net/documentation/trigger_b4_dl.html -## -server.modules += ( "mod_mod_trigger_b4_dl" ) - -## -## To store the trigger state you can either use a local GDBM -## file or memcached(s). -## - -## -## Path to the local GDBM file. -## -trigger-before-download.gdbm-filename = home_dir + "/trigger.db" - -## -## List of memcached servers. -## -#trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) - -## -## URL prefix a visitor has to visit before downloading is allowed -## -trigger-before-download.trigger-url = "^/trigger/" - -## -## URL Prefix of the proteced area. -## -trigger-before-download.download-url = "^/download/" - -## -## -## The deny url. -## -trigger-before-download.deny-url = "http://www.example.com/index.html" - -## -## How long the "ticket" of the user will be valid. -## -## Value in seconds. -## -trigger-before-download.trigger-timeout = 10 - -## -## Normally the memcached key will be the remote ip of the request -## If you store other data in the memcached aswell and want to avoid -## key collisions you can configure a memcache-namespace. -## -## The key for the request will be memcache-namespace + remote_ip than. -## -#trigger-before-download.memcache-namespace = "t4bdl_" - -## -## If set to 1, the module will log some debug informations. -## -#trigger-before-download.debug = 0 - -## -####################################################################### diff --git a/doc/config/conf.d/userdir.conf b/doc/config/conf.d/userdir.conf deleted file mode 100644 index 1e3691e..0000000 --- a/doc/config/conf.d/userdir.conf +++ /dev/null @@ -1,37 +0,0 @@ -####################################################################### -## -## Userdir Module -## ---------------- -## -## for all details see: -## http://www.lighttpd.net/documentation/userdir.html -## -server.modules += ( "mod_userdir" ) - -## -## usually it should be set to "public_html" to take ~/public_html/ as -## the document root -## Default: empty (document root is the home directory) -## -userdir.path = "public_html" - -## -## If set, don't check /etc/passwd for homedir -## Default: empty -#userdir.basepath = server_root + "/users/" - -## -## list of usernames which may not use this feature -## Default: empty (all users may use it) -## -#userdir.exclude-user = ( "root", "postmaster" ) - -## -## if set, only users from this list may use the feature -## Default: empty (all users may use it) -## -#userdir.include-user = ("user1", "user2") - -## -####################################################################### - diff --git a/doc/config/conf.d/webdav.conf b/doc/config/conf.d/webdav.conf deleted file mode 100644 index 2c37335..0000000 --- a/doc/config/conf.d/webdav.conf +++ /dev/null @@ -1,33 +0,0 @@ -####################################################################### -## -## WebDAV Module -## --------------- -## -## http://www.lighttpd.net/documentation/webdav.html -## -server.modules += ( "mod_webdav" ) - -$HTTP["url"] =~ "^/dav($|/)" { - ## - ## enable webdav for this location - ## - webdav.activate = "enable" - - ## - ## By default the webdav url is writable. - ## Uncomment the following line if you want to make it readonly. - ## - #webdav.is-readonly = "enable" - - ## - ## Log the XML Request bodies for debugging - ## - #webdav.log-xml = "disable" - - ## - ## - ## - webdav.sqlite-db-name = home_dir + "/webdav.db" -} -## -####################################################################### diff --git a/doc/config/lighttpd.conf b/doc/config/lighttpd.conf deleted file mode 100644 index 47d6729..0000000 --- a/doc/config/lighttpd.conf +++ /dev/null @@ -1,445 +0,0 @@ -####################################################################### -## -## /etc/lighttpd/lighttpd.conf -## -## check /etc/lighttpd/conf.d/*.conf for the configuration of modules. -## -####################################################################### - -####################################################################### -## -## Some Variable definition which will make chrooting easier. -## -## if you add a variable here. Add the corresponding variable in the -## chroot example aswell. -## -var.log_root = "/var/log/lighttpd" -var.server_root = "/srv/www" -var.state_dir = "/var/run" -var.home_dir = "/var/lib/lighttpd" -var.conf_dir = "/etc/lighttpd" - -## -## run the server chrooted. -## -## This requires root permissions during startup. -## -## If you run Chrooted set the the variables to directories relative to -## the chroot dir. -## -## example chroot configuration: -## -#var.log_root = "/logs" -#var.server_root = "/" -#var.state_dir = "/run" -#var.home_dir = "/lib/lighttpd" -#var.vhosts_dir = "/vhosts" -#var.conf_dir = "/etc" -# -#server.chroot = "/srv/www" - -## -## Some additional variables to make the configuration easier -## - -## -## Base directory for all virtual hosts -## -## used in: -## conf.d/evhost.conf -## conf.d/simple_vhost.conf -## vhosts.d/vhosts.template -## -var.vhosts_dir = server_root + "/vhosts" - -## -## Cache for mod_compress -## -## used in: -## conf.d/compress.conf -## -var.cache_dir = "/var/cache/lighttpd" - -## -## Base directory for sockets. -## -## used in: -## conf.d/fastcgi.conf -## conf.d/scgi.conf -## -var.socket_dir = home_dir + "/sockets" - -## -####################################################################### - -####################################################################### -## -## Load the modules. -include "modules.conf" - -## -####################################################################### - -####################################################################### -## -## Basic Configuration -## --------------------- -## -server.port = 80 - -## -## Use IPv6? -## -server.use-ipv6 = "enable" - -## -## bind to a specific IP -## -#server.bind = "localhost" - -## -## Run as a different username/groupname. -## This requires root permissions during startup. -## -server.username = "lighttpd" -server.groupname = "lighttpd" - -## -## enable core files. -## -#server.core-files = "disable" - -## -## Document root -## -server.document-root = server_root + "/htdocs" - -## -## The value for the "Server:" response field. -## -## It would be nice to keep it at "lighttpd". -## -#server.tag = "lighttpd" - -## -## store a pid file -## -server.pid-file = state_dir + "/lighttpd.pid" - -## -####################################################################### - -####################################################################### -## -## Logging Options -## ------------------ -## -## all logging options can be overwritten per vhost. -## -## Path to the error log file -## -server.errorlog = log_root + "/error.log" - -## -## If you want to log to syslog you have to unset the -## server.errorlog setting and uncomment the next line. -## -#server.errorlog-use-syslog = "enable" - -## -## Access log config -## -include "conf.d/access_log.conf" - -## -## The debug options are moved into their own file. -## see conf.d/debug.conf for various options for request debugging. -## -include "conf.d/debug.conf" - -## -####################################################################### - -####################################################################### -## -## Tuning/Performance -## -------------------- -## -## corresponding documentation: -## http://www.lighttpd.net/documentation/performance.html -## -## set the event-handler (read the performance section in the manual) -## -## possible options on linux are: -## -## select -## poll -## linux-sysepoll -## -## linux-sysepoll is recommended on kernel 2.6. -## -server.event-handler = "linux-sysepoll" - -## -## The basic network interface for all platforms at the syscalls read() -## and write(). Every modern OS provides its own syscall to help network -## servers transfer files as fast as possible -## -## linux-sendfile - is recommended for small files. -## writev - is recommended for sending many large files -## -server.network-backend = "linux-sendfile" - -## -## As lighttpd is a single-threaded server, its main resource limit is -## the number of file descriptors, which is set to 1024 by default (on -## most systems). -## -## If you are running a high-traffic site you might want to increase this -## limit by setting server.max-fds. -## -## Changing this setting requires root permissions on startup. see -## server.username/server.groupname. -## -## By default lighttpd would not change the operation system default. -## But setting it to 2048 is a better default for busy servers. -## -server.max-fds = 2048 - -## -## Stat() call caching. -## -## lighttpd can utilize FAM/Gamin to cache stat call. -## -## possible values are: -## disable, simple or fam. -## -server.stat-cache-engine = "simple" - -## -## Fine tuning for the request handling -## -## max-connections == max-fds/2 (maybe /3) -## means the other file handles are used for fastcgi/files -## -server.max-connections = 1024 - -## -## How many seconds to keep a keep-alive connection open, -## until we consider it idle. -## -## Default: 5 -## -#server.max-keep-alive-idle = 5 - -## -## How many keep-alive requests until closing the connection. -## -## Default: 16 -## -#server.max-keep-alive-requests = 16 - -## -## Maximum size of a request in kilobytes. -## By default it is unlimited (0). -## -## Uploads to your server cant be larger than this value. -## -#server.max-request-size = 0 - -## -## Time to read from a socket before we consider it idle. -## -## Default: 60 -## -#server.max-read-idle = 60 - -## -## Time to write to a socket before we consider it idle. -## -## Default: 360 -## -#server.max-write-idle = 360 - -## -## Traffic Shaping -## ----------------- -## -## see /usr/share/doc/lighttpd/traffic-shaping.txt -## -## Values are in kilobyte per second. -## -## Keep in mind that a limit below 32kB/s might actually limit the -## traffic to 32kB/s. This is caused by the size of the TCP send -## buffer. -## -## per server: -## -#server.kbytes-per-second = 128 - -## -## per connection: -## -#connection.kbytes-per-second = 32 - -## -####################################################################### - -####################################################################### -## -## Filename/File handling -## ------------------------ - -## -## files to check for if .../ is requested -## index-file.names = ( "index.php", "index.rb", "index.html", -## "index.htm", "default.htm" ) -## -index-file.names += ( - "index.xhtml", "index.html", "index.htm", "default.htm", "index.php" -) - -## -## deny access the file-extensions -## -## ~ is for backupfiles from vi, emacs, joe, ... -## .inc is often used for code includes which should in general not be part -## of the document-root -url.access-deny = ( "~", ".inc" ) - -## -## disable range requests for pdf files -## workaround for a bug in the Acrobat Reader plugin. -## -$HTTP["url"] =~ "\.pdf$" { - server.range-requests = "disable" -} - -## -## url handling modules (rewrite, redirect) -## -#url.rewrite = ( "^/$" => "/server-status" ) -#url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" ) - -## -## both rewrite/redirect support back reference to regex conditional using %n -## -#$HTTP["host"] =~ "^www\.(.*)" { -# url.redirect = ( "^/(.*)" => "http://%1/$1" ) -#} - -## -## which extensions should not be handle via static-file transfer -## -## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi -## -static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" ) - -## -## error-handler for status 404 -## -#server.error-handler-404 = "/error-handler.html" -#server.error-handler-404 = "/error-handler.php" - -## -## Format: <errorfile-prefix><status-code>.html -## -> ..../status-404.html for 'File not found' -## -#server.errorfile-prefix = "/srv/www/htdocs/errors/status-" - -## -## mimetype mapping -## -include "conf.d/mime.conf" - -## -## directory listing configuration -## -include "conf.d/dirlisting.conf" - -## -## Should lighttpd follow symlinks? -## -server.follow-symlink = "enable" - -## -## force all filenames to be lowercase? -## -#server.force-lowercase-filenames = "disable" - -## -## defaults to /var/tmp as we assume it is a local harddisk -## -server.upload-dirs = ( "/var/tmp" ) - -## -####################################################################### - - -####################################################################### -## -## SSL Support -## ------------- -## -## To enable SSL for the whole server you have to provide a valid -## certificate and have to enable the SSL engine.:: -## -## ssl.engine = "enable" -## ssl.pemfile = "/path/to/server.pem" -## -## The HTTPS protocol does not allow you to use name-based virtual -## hosting with SSL. If you want to run multiple SSL servers with -## one lighttpd instance you must use IP-based virtual hosting: :: -## -## $SERVER["socket"] == "10.0.0.1:443" { -## ssl.engine = "enable" -## ssl.pemfile = "/etc/ssl/private/www.example.com.pem" -## # -## # Mitigate BEAST attack: -## # -## # A stricter base cipher suite. For details see: -## # http://blog.ivanristic.com/2011/10/mitigating-the-beast-attack-on-tls.html -## # -## ssl.cipher-list = "ECDHE-RSA-AES256-SHA384:AES256-SHA256:RC4-SHA:RC4:HIGH:!MD5:!aNULL:!EDH:!AESGCM" -## # -## # Make the server prefer the order of the server side cipher suite instead of the client suite. -## # This is necessary to mitigate the BEAST attack (unless you disable all non RC4 algorithms). -## # This option is enabled by default, but only used if ssl.cipher-list is set. -## # -## # ssl.honor-cipher-order = "enable" -## # -## # Mitigate CVE-2009-3555 by disabling client triggered renegotation -## # This is enabled by default. -## # -## # ssl.disable-client-renegotiation = "enable" -## # -## server.name = "www.example.com" -## -## server.document-root = "/srv/www/vhosts/example.com/www/" -## } -## - -## If you have a .crt and a .key file, cat them together into a -## single PEM file: -## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \ -## > /etc/ssl/private/lighttpd.pem -## -#ssl.pemfile = "/etc/ssl/private/lighttpd.pem" - -## -## optionally pass the CA certificate here. -## -## -#ssl.ca-file = "" - -## -####################################################################### - -####################################################################### -## -## custom includes like vhosts. -## -#include "conf.d/config.conf" -#include_shell "cat /etc/lighttpd/vhosts.d/*.conf" -## -####################################################################### diff --git a/doc/config/modules.conf b/doc/config/modules.conf deleted file mode 100644 index 99a3c3f..0000000 --- a/doc/config/modules.conf +++ /dev/null @@ -1,172 +0,0 @@ -####################################################################### -## -## Modules to load -## ----------------- -## -## at least mod_access and mod_accesslog should be loaded -## all other module should only be loaded if really neccesary -## -## - saves some time -## - saves memory -## -## the default module set contains: -## -## "mod_indexfile", "mod_dirlisting", "mod_staticfile" -## -## you dont have to include those modules in your list -## -## Modules, which are pulled in via conf.d/*.conf -## -## NOTE: the order of modules is important. -## -## - mod_accesslog -> conf.d/access_log.conf -## - mod_compress -> conf.d/compress.conf -## - mod_status -> conf.d/status.conf -## - mod_webdav -> conf.d/webdav.conf -## - mod_cml -> conf.d/cml.conf -## - mod_evhost -> conf.d/evhost.conf -## - mod_simple_vhost -> conf.d/simple_vhost.conf -## - mod_mysql_vhost -> conf.d/mysql_vhost.conf -## - mod_trigger_b4_dl -> conf.d/trigger_b4_dl.conf -## - mod_userdir -> conf.d/userdir.conf -## - mod_rrdtool -> conf.d/rrdtool.conf -## - mod_ssi -> conf.d/ssi.conf -## - mod_cgi -> conf.d/cgi.conf -## - mod_scgi -> conf.d/scgi.conf -## - mod_fastcgi -> conf.d/fastcgi.conf -## - mod_proxy -> conf.d/proxy.conf -## - mod_secdownload -> conf.d/secdownload.conf -## - mod_expire -> conf.d/expire.conf -## - -server.modules = ( - "mod_access", -# "mod_alias", -# "mod_auth", -# "mod_evasive", -# "mod_redirect", -# "mod_rewrite", -# "mod_setenv", -# "mod_usertrack", -) - -## -####################################################################### - -####################################################################### -## -## Config for various Modules -## - -## -## mod_ssi -## -#include "conf.d/ssi.conf" - -## -## mod_status -## -#include "conf.d/status.conf" - -## -## mod_webdav -## -#include "conf.d/webdav.conf" - -## -## mod_compress -## -#include "conf.d/compress.conf" - -## -## mod_userdir -## -#include "conf.d/userdir.conf" - -## -## mod_magnet -## -#include "conf.d/magnet.conf" - -## -## mod_cml -## -#include "conf.d/cml.conf" - -## -## mod_rrdtool -## -#include "conf.d/rrdtool.conf" - -## -## mod_proxy -## -#include "conf.d/proxy.conf" - -## -## mod_expire -## -#include "conf.d/expire.conf" - -## -## mod_secdownload -## -#include "conf.d/secdownload.conf" - -## -####################################################################### - -####################################################################### -## -## CGI modules -## - -## -## SCGI (mod_scgi) -## -#include "conf.d/scgi.conf" - -## -## FastCGI (mod_fastcgi) -## -#include "conf.d/fastcgi.conf" - -## -## plain old CGI (mod_cgi) -## -#include "conf.d/cgi.conf" - -## -####################################################################### - -####################################################################### -## -## VHost Modules -## -## Only load ONE of them! -## ======================== -## - -## -## You can use conditionals for vhosts aswell. -## -## see http://www.lighttpd.net/documentation/configuration.html -## - -## -## mod_evhost -## -#include "conf.d/evhost.conf" - -## -## mod_simple_vhost -## -#include "conf.d/simple_vhost.conf" - -## -## mod_mysql_vhost -## -#include "conf.d/mysql_vhost.conf" - -## -####################################################################### diff --git a/doc/config/vhosts.d/Makefile.am b/doc/config/vhosts.d/Makefile.am deleted file mode 100644 index 51d9376..0000000 --- a/doc/config/vhosts.d/Makefile.am +++ /dev/null @@ -1 +0,0 @@ -EXTRA_DIST=vhosts.template diff --git a/doc/config/vhosts.d/Makefile.in b/doc/config/vhosts.d/Makefile.in deleted file mode 100644 index a6e536d..0000000 --- a/doc/config/vhosts.d/Makefile.in +++ /dev/null @@ -1,401 +0,0 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = doc/config/vhosts.d -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ATTR_LIB = @ATTR_LIB@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BZ_LIB = @BZ_LIB@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CRYPT_LIB = @CRYPT_LIB@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DL_LIB = @DL_LIB@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FAM_CFLAGS = @FAM_CFLAGS@ -FAM_LIBS = @FAM_LIBS@ -FGREP = @FGREP@ -GDBM_LIB = @GDBM_LIB@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LBER_LIB = @LBER_LIB@ -LD = @LD@ -LDAP_LIB = @LDAP_LIB@ -LDFLAGS = @LDFLAGS@ -LIBEV_CFLAGS = @LIBEV_CFLAGS@ -LIBEV_LIBS = @LIBEV_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LUA_CFLAGS = @LUA_CFLAGS@ -LUA_LIBS = @LUA_LIBS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MEMCACHE_LIB = @MEMCACHE_LIB@ -MKDIR_P = @MKDIR_P@ -MYSQL_CONFIG = @MYSQL_CONFIG@ -MYSQL_INCLUDE = @MYSQL_INCLUDE@ -MYSQL_LIBS = @MYSQL_LIBS@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PCRECONFIG = @PCRECONFIG@ -PCRE_LIB = @PCRE_LIB@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SED = @SED@ -SENDFILE_LIB = @SENDFILE_LIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SQLITE_CFLAGS = @SQLITE_CFLAGS@ -SQLITE_LIBS = @SQLITE_LIBS@ -SSL_LIB = @SSL_LIB@ -STRIP = @STRIP@ -U = @U@ -UUID_LIBS = @UUID_LIBS@ -VERSION = @VERSION@ -XML_CFLAGS = @XML_CFLAGS@ -XML_LIBS = @XML_LIBS@ -Z_LIB = @Z_LIB@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = vhosts.template -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/config/vhosts.d/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/config/vhosts.d/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/doc/config/vhosts.d/vhosts.template b/doc/config/vhosts.d/vhosts.template deleted file mode 100644 index 2c443aa..0000000 --- a/doc/config/vhosts.d/vhosts.template +++ /dev/null @@ -1,33 +0,0 @@ -####################################################################### -## -## For more examples check: -## -## http://www.lighttpd.net/documentation/configuration.html#conditional-configuration -## -$HTTP["host"] == "download.example.com" { - var.server_name = "download.example.com" - - server.name = server_name - ## - ## use trigger before download - ## - include "conf.d/trigger_b4_dl.conf" - - server.document-root = vhosts_dir + "/example.com/download/htdocs" - ## - ## use a seperate access log file - ## At the moment you cant have different error log files. - ## - accesslog.filename = log_root + "/" + server_name "/access.log" -} - -$SERVER["socket"] == "127.0.0.1:443" { - server.name = "localhost" - ssl.pemfile = "/etc/ssl/private/lighttpd-localhost.pem" - ssl.engine = "enable" - - server.document-root = vhosts_dir + "/ssl-localhost/pages/" -} - -## -####################################################################### |