Imported Upstream version 5.7.2.1~dfsgupstream/5.7.2.1_dfsgupstream

1 files changed, 1561 insertions, 0 deletions

diff --git a/mibs/DISMAN-PING-MIB.txt b/mibs/DISMAN-PING-MIB.txt
new file mode 100644
index 0000000..645ff8c
--- /dev/null
+++ b/mibs/DISMAN-PING-MIB.txt
@@ -0,0 +1,1561 @@
+DISMAN-PING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
+    Unsigned32, Gauge32, mib-2,
+    NOTIFICATION-TYPE, OBJECT-IDENTITY
+        FROM SNMPv2-SMI                  -- RFC2578
+    TEXTUAL-CONVENTION, RowStatus,
+    StorageType, DateAndTime, TruthValue
+        FROM SNMPv2-TC                   -- RFC2579
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                 -- RFC2580
+    InterfaceIndexOrZero                 -- RFC2863
+        FROM IF-MIB
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB          -- RFC3411
+    InetAddressType, InetAddress
+        FROM INET-ADDRESS-MIB;           -- RFC4001
+
+ pingMIB MODULE-IDENTITY
+    LAST-UPDATED "200606130000Z"         -- 13 June 2006
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO
+        "Juergen Quittek
+
+        NEC Europe Ltd.
+        Network Laboratories
+        Kurfuersten-Anlage 36
+        69115 Heidelberg
+        Germany
+
+        Phone: +49 6221 4342-115
+
+        Email: quittek@netlab.nec.de"
+    DESCRIPTION
+        "The Ping MIB (DISMAN-PING-MIB) provides the capability of
+        controlling the use of the ping function at a remote
+        host.
+
+        Copyright (C) The Internet Society (2006).  This version of
+        this MIB module is part of RFC 4560; see the RFC itself for
+        full legal notices."
+
+     --  Revision history
+
+     REVISION     "200606130000Z"         -- 13 June 2006
+     DESCRIPTION
+         "Updated version, published as RFC 4560.
+             - Correctly considered IPv6 in DESCRIPTION
+               clause of pingCtlDataSize
+             - Replaced references to RFC 2575 by RFC 3415
+             - Replaced references to RFC 2571 by RFC 3411
+             - Replaced references to RFC 2851 by RFC 4001
+             - Added DEFVAL { {} } to definition of
+               pingCtlTrapGeneration
+             - Changed DEFVAL of object pingCtlDescr from
+               DEFVAL { '00'H } to DEFVAL { ''H }
+             - Changed DEFVAL of object pingCtlSourceAddressType
+               from DEFVAL { ipv4 } to DEFVAL { unknown }
+             - Extended DESCRIPTION clause of pingResultsTable
+               describing re-initialization of entries
+             - Changed SYNTAX of pingResultsProbeResponses and
+               pingResultsSentProbes from Unsigned32 to Gauge32
+             - Changed status of pingCompliance to deprecated
+             - Added pingFullCompliance and pingMinimumCompliance
+             - Changed status of pingGroup and pingTimeStampGroup
+               to deprecated
+             - Added pingMinimumGroup, pingCtlRowStatusGroup,
+               and pingHistoryGroup"
+
+     REVISION     "200009210000Z"         -- 21 September 2000
+     DESCRIPTION
+         "Initial version, published as RFC 2925."
+    ::= { mib-2 80 }
+
+ -- Textual Conventions
+
+  OperationResponseStatus ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Used to report the result of an operation:
+
+         responseReceived(1) - Operation is completed successfully.
+         unknown(2) - Operation failed due to unknown error.
+         internalError(3) - An implementation detected an error
+              in its own processing that caused an operation
+              to fail.
+         requestTimedOut(4) - Operation failed to receive a
+              valid reply within the time limit imposed on it.
+         unknownDestinationAddress(5) - Invalid destination
+              address.
+         noRouteToTarget(6) - Could not find a route to target.
+         interfaceInactiveToTarget(7) - The interface to be
+              used in sending a probe is inactive, and an
+              alternate route does not exist.
+         arpFailure(8) - Unable to resolve a target address to a
+              media-specific address.
+         maxConcurrentLimitReached(9) - The maximum number of
+              concurrent active operations would have been exceeded
+              if the corresponding operation was allowed.
+         unableToResolveDnsName(10) - The DNS name specified was
+              unable to be mapped to an IP address.
+         invalidHostAddress(11) - The IP address for a host
+              has been determined to be invalid.  Examples of this
+              are broadcast or multicast addresses."
+    SYNTAX INTEGER {
+                 responseReceived(1),
+                 unknown(2),
+                 internalError(3),
+                 requestTimedOut(4),
+                 unknownDestinationAddress(5),
+                 noRouteToTarget(6),
+                 interfaceInactiveToTarget(7),
+                 arpFailure(8),
+                 maxConcurrentLimitReached(9),
+                 unableToResolveDnsName(10),
+                 invalidHostAddress(11)
+              }
+
+ -- Top level structure of the MIB
+
+ pingNotifications              OBJECT IDENTIFIER ::= { pingMIB 0 }
+ pingObjects                    OBJECT IDENTIFIER ::= { pingMIB 1 }
+ pingConformance                OBJECT IDENTIFIER ::= { pingMIB 2 }
+
+ -- The registration node (point) for ping implementation types
+
+ pingImplementationTypeDomains  OBJECT IDENTIFIER ::= { pingMIB 3 }
+
+ pingIcmpEcho OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is using the Internet
+        Control Message Protocol (ICMP) 'ECHO' facility."
+    ::= { pingImplementationTypeDomains 1 }
+
+ pingUdpEcho OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is using the UDP echo
+        port (7)."
+    REFERENCE
+        "RFC 862, 'Echo Protocol'."
+    ::= { pingImplementationTypeDomains 2 }
+
+ pingSnmpQuery OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is using an SNMP query
+         to calculate a round trip time."
+    ::= { pingImplementationTypeDomains 3 }
+
+ pingTcpConnectionAttempt OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is attempting to
+        connect to a TCP port in order to calculate a round
+        trip time."
+    ::= { pingImplementationTypeDomains 4 }
+
+ -- Simple Object Definitions
+
+ pingMaxConcurrentRequests OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "requests"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The maximum number of concurrent active ping requests
+       that are allowed within an agent implementation.  A value
+       of 0 for this object implies that there is no limit for
+       the number of concurrent active requests in effect.
+
+       The limit applies only to new requests being activated.
+       When a new value is set, the agent will continue processing
+       all the requests already active, even if their number
+       exceeds the limit just imposed."
+    DEFVAL { 10 }
+    ::= { pingObjects 1 }
+
+ -- Ping Control Table
+
+ pingCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PingCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the ping Control Table for providing, via SNMP,
+        the capability of performing ping operations at
+        a remote host.  The results of these operations are
+        stored in the pingResultsTable and the
+        pingProbeHistoryTable."
+   ::= { pingObjects 2 }
+
+ pingCtlEntry OBJECT-TYPE
+    SYNTAX      PingCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the pingCtlTable.  The first index
+        element, pingCtlOwnerIndex, is of type SnmpAdminString,
+        a textual convention that allows for use of the SNMPv3
+        View-Based Access Control Model (RFC 3415, VACM)
+        and that allows a management application to identify its
+        entries.  The second index, pingCtlTestName (also an
+        SnmpAdminString), enables the same management
+        application to have multiple outstanding requests."
+    INDEX {
+             pingCtlOwnerIndex,
+             pingCtlTestName
+          }
+    ::= { pingCtlTable 1 }
+
+ PingCtlEntry ::=
+    SEQUENCE {
+        pingCtlOwnerIndex             SnmpAdminString,
+        pingCtlTestName               SnmpAdminString,
+        pingCtlTargetAddressType      InetAddressType,
+        pingCtlTargetAddress          InetAddress,
+        pingCtlDataSize               Unsigned32,
+        pingCtlTimeOut                Unsigned32,
+        pingCtlProbeCount             Unsigned32,
+        pingCtlAdminStatus            INTEGER,
+        pingCtlDataFill               OCTET STRING,
+        pingCtlFrequency              Unsigned32,
+        pingCtlMaxRows                Unsigned32,
+        pingCtlStorageType            StorageType,
+        pingCtlTrapGeneration         BITS,
+        pingCtlTrapProbeFailureFilter Unsigned32,
+        pingCtlTrapTestFailureFilter  Unsigned32,
+        pingCtlType                   OBJECT IDENTIFIER,
+        pingCtlDescr                  SnmpAdminString,
+        pingCtlSourceAddressType      InetAddressType,
+        pingCtlSourceAddress          InetAddress,
+        pingCtlIfIndex                InterfaceIndexOrZero,
+        pingCtlByPassRouteTable       TruthValue,
+        pingCtlDSField                Unsigned32,
+        pingCtlRowStatus              RowStatus
+    }
+
+ pingCtlOwnerIndex OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "To facilitate the provisioning of access control by a
+       security administrator using the View-Based Access
+       Control Model (RFC 2575, VACM) for tables in which
+       multiple users may need to create or
+       modify entries independently, the initial index is used
+       as an 'owner index'.  Such an initial index has a syntax
+       of SnmpAdminString and can thus be trivially mapped to a
+       securityName or groupName defined in VACM, in
+       accordance with a security policy.
+
+       When used in conjunction with such a security policy, all
+       entries in the table belonging to a particular user (or
+       group) will have the same value for this initial index.
+       For a given user's entries in a particular table, the
+       object identifiers for the information in these entries
+       will have the same subidentifiers (except for the 'column'
+       subidentifier) up to the end of the encoded owner index.
+       To configure VACM to permit access to this portion of the
+       table, one would create vacmViewTreeFamilyTable entries
+       with the value of vacmViewTreeFamilySubtree including
+       the owner index portion, and vacmViewTreeFamilyMask
+       'wildcarding' the column subidentifier.  More elaborate
+       configurations are possible."
+    ::= { pingCtlEntry 1 }
+
+ pingCtlTestName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of the ping test.  This is locally unique, within
+        the scope of a pingCtlOwnerIndex."
+    ::= { pingCtlEntry 2 }
+
+ pingCtlTargetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the type of host address to be used at a remote
+        host for performing a ping operation."
+    DEFVAL { unknown }
+    ::= { pingCtlEntry 3 }
+
+ pingCtlTargetAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the host address to be used at a remote host for
+        performing a ping operation.  The host address type is
+        determined by the value of the corresponding
+        pingCtlTargetAddressType.
+
+        A value for this object MUST be set prior to transitioning
+        its corresponding pingCtlEntry to active(1) via
+        pingCtlRowStatus."
+    DEFVAL { ''H }
+    ::= { pingCtlEntry 4 }
+
+ pingCtlDataSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65507)
+    UNITS       "octets"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the size of the data portion to be
+        transmitted in a ping operation, in octets.  Whether this
+        value can be applied depends on the selected
+        implementation method for performing a ping operation,
+        indicated by pingCtlType in the same conceptual row.
+        If the method used allows applying the value contained
+
+        in this object, then it MUST be applied.  If the specified
+        size is not appropriate for the chosen ping method, the
+        implementation SHOULD use whatever size (appropriate to
+        the method) is closest to the specified size.
+
+        The maximum value for this object was computed by
+        subtracting the smallest possible IP header size of
+        20 octets (IPv4 header with no options) and the UDP
+        header size of 8 octets from the maximum IP packet size.
+        An IP packet has a maximum size of 65535 octets
+        (excluding IPv6 Jumbograms)."
+    DEFVAL { 0 }
+    ::= { pingCtlEntry 5 }
+
+ pingCtlTimeOut OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the time-out value, in seconds, for a
+        remote ping operation."
+    DEFVAL { 3 }
+    ::= { pingCtlEntry 6 }
+
+ pingCtlProbeCount OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..15)
+    UNITS       "probes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the number of times to perform a ping
+        operation at a remote host as part of a single ping test."
+    DEFVAL { 1 }
+    ::= { pingCtlEntry 7 }
+
+ pingCtlAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          enabled(1), -- test should be started
+                          disabled(2) -- test should be stopped
+                        }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Reflects the desired state that a pingCtlEntry should be
+        in:
+
+           enabled(1)  - Attempt to activate the test as defined by
+                         this pingCtlEntry.
+           disabled(2) - Deactivate the test as defined by this
+                         pingCtlEntry.
+
+        Refer to the corresponding pingResultsOperStatus to
+        determine the operational state of the test defined by
+        this entry."
+     DEFVAL { disabled }
+    ::= { pingCtlEntry 8 }
+
+ pingCtlDataFill  OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..1024))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The content of this object is used together with the
+        corresponding pingCtlDataSize value to determine how to
+        fill the data portion of a probe packet.  The option of
+        selecting a data fill pattern can be useful when links
+        are compressed or have data pattern sensitivities.  The
+        contents of pingCtlDataFill should be repeated in a ping
+        packet when the size of the data portion of the ping
+        packet is greater than the size of pingCtlDataFill."
+    DEFVAL { '00'H }
+    ::= { pingCtlEntry 9 }
+
+ pingCtlFrequency  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of seconds to wait before repeating a ping test
+        as defined by the value of the various objects in the
+        corresponding row.
+
+        A single ping test consists of a series of ping probes.
+        The number of probes is determined by the value of the
+        corresponding pingCtlProbeCount object.  After a single
+        test is completed the number of seconds as defined by the
+        value of pingCtlFrequency MUST elapse before the
+        next ping test is started.
+
+        A value of 0 for this object implies that the test
+        as defined by the corresponding entry will not be
+        repeated."
+    DEFVAL { 0 }
+    ::= { pingCtlEntry 10 }
+
+ pingCtlMaxRows OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "rows"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of corresponding entries allowed
+        in the pingProbeHistoryTable.  An implementation of this
+        MIB will remove the oldest corresponding entry in the
+        pingProbeHistoryTable to allow the addition of an
+        new entry once the number of corresponding rows in the
+        pingProbeHistoryTable reaches this value.
+
+        Old entries are not removed when a new test is
+        started.  Entries are added to the pingProbeHistoryTable
+        until pingCtlMaxRows is reached before entries begin to
+        be removed.
+
+        A value of 0 for this object disables creation of
+        pingProbeHistoryTable entries."
+    DEFVAL      { 50 }
+    ::= { pingCtlEntry 11 }
+
+ pingCtlStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent' need not
+        allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { pingCtlEntry 12 }
+
+ pingCtlTrapGeneration OBJECT-TYPE
+    SYNTAX      BITS {
+                   probeFailure(0),
+                   testFailure(1),
+                   testCompletion(2)
+                  }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object determines when and whether
+        to generate a notification for this entry:
+
+        probeFailure(0)   - Generate a pingProbeFailed
+            notification subject to the value of
+            pingCtlTrapProbeFailureFilter.  The object
+            pingCtlTrapProbeFailureFilter can be used
+            to specify the number of consecutive probe
+            failures that are required before a
+            pingProbeFailed notification can be generated.
+        testFailure(1)    - Generate a pingTestFailed
+            notification.  In this instance the object
+            pingCtlTrapTestFailureFilter can be used to
+            determine the number of probe failures that
+            signal when a test fails.
+        testCompletion(2) - Generate a pingTestCompleted
+            notification.
+
+        By default, no bits are set, indicating that
+        none of the above options is selected."
+    DEFVAL { {} }  -- no bits set.
+    ::= { pingCtlEntry 13 }
+
+ pingCtlTrapProbeFailureFilter OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..15)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is used to determine when
+        to generate a pingProbeFailed NOTIFICATION.
+
+        Setting BIT probeFailure(0) of object
+        pingCtlTrapGeneration to '1' implies that a
+        pingProbeFailed NOTIFICATION is generated only when
+
+        a number of consecutive ping probes equal to the
+        value of pingCtlTrapProbeFailureFilter fail within
+        a given ping test.  After triggering the notification,
+        the probe failure counter is reset to zero."
+    DEFVAL { 1 }
+    ::= { pingCtlEntry 14 }
+
+ pingCtlTrapTestFailureFilter OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..15)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is used to determine when
+        to generate a pingTestFailed NOTIFICATION.
+
+        Setting BIT testFailure(1) of object
+
+        pingCtlTrapGeneration to '1' implies that a
+        pingTestFailed NOTIFICATION is generated only when
+        a number of consecutive ping tests equal to the
+        value of pingCtlTrapProbeFailureFilter fail.
+        After triggering the notification, the test failure
+        counter is reset to zero."
+    DEFVAL { 1 }
+    ::= { pingCtlEntry 15 }
+
+ pingCtlType OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is used either to report or
+        to select the implementation method to be used for
+        calculating a ping response time.  The value of this
+        object MAY be selected from pingImplementationTypeDomains.
+
+        Additional implementation types SHOULD be allocated as
+        required by implementers of the DISMAN-PING-MIB under
+        their enterprise-specific registration point and not
+        beneath pingImplementationTypeDomains."
+    DEFVAL { pingIcmpEcho }
+    ::= { pingCtlEntry 16 }
+
+ pingCtlDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The purpose of this object is to provide a
+        descriptive name of the remote ping test."
+    DEFVAL { ''H }
+    ::= { pingCtlEntry 17 }
+
+ pingCtlSourceAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the type of the source address,
+        pingCtlSourceAddress, to be used at a remote host
+        when a ping operation is performed."
+    DEFVAL { unknown }
+    ::= { pingCtlEntry 18 }
+
+  pingCtlSourceAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Use the specified IP address (which must be given in
+        numeric form, not as a hostname) as the source address
+        in outgoing probe packets.  On hosts with more than one
+        IP address, this option can be used to select the address
+        to be used.  If the IP address is not one of this
+        machine's interface addresses, an error is returned and
+        nothing is sent.  A zero-length octet string value for
+        this object disables source address specification.
+
+        The address type (InetAddressType) that relates to
+        this object is specified by the corresponding value
+        of pingCtlSourceAddressType."
+    DEFVAL { ''H }
+    ::= { pingCtlEntry 19 }
+
+ pingCtlIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Setting this object to an interface's ifIndex prior
+        to starting a remote ping operation directs
+        the ping probes to be transmitted over the
+        specified interface.  A value of zero for this object
+        means that this option is not enabled."
+    DEFVAL { 0 }
+    ::= { pingCtlEntry 20 }
+
+ pingCtlByPassRouteTable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The purpose of this object is to enable optional
+       bypassing the route table.  If enabled, the remote
+       host will bypass the normal routing tables and send
+       directly to a host on an attached network.  If the
+       host is not on a directly attached network, an
+       error is returned.  This option can be used to perform
+       the ping operation to a local host through an
+       interface that has no route defined (e.g., after the
+       interface was dropped by the routing daemon at the host)."
+    DEFVAL { false }
+    ::= { pingCtlEntry 21 }
+
+ pingCtlDSField OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the value to store in the Type of Service
+        (TOS) octet in the IPv4 header or in the Traffic
+        Class octet in the IPv6 header, respectively, of the
+        IP packet used to encapsulate the ping probe.
+
+        The octet to be set in the IP header contains the
+        Differentiated Services (DS) Field in the six most
+        significant bits.
+
+        This option can be used to determine what effect an
+        explicit DS Field setting has on a ping response.
+        Not all values are legal or meaningful.  A value of 0
+        means that the function represented by this option is
+        not supported.  DS Field usage is often not supported
+        by IP implementations, and not all values are supported.
+        Refer to RFC 2474 and RFC 3260 for guidance on usage of
+        this field."
+    REFERENCE
+        "Refer to RFC 1812 for the definition of the IPv4 TOS
+        octet and to RFC 2460 for the definition of the IPv6
+        Traffic Class octet.  Refer to RFC 2474 and RFC 3260
+        for the definition of the Differentiated Services Field."
+    DEFVAL { 0 }
+    ::= { pingCtlEntry 22 }
+
+ pingCtlRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the pingCtlTable.  Deletion of an entry in this
+        table results in the deletion of all corresponding (same
+        pingCtlOwnerIndex and pingCtlTestName index values)
+        pingResultsTable and pingProbeHistoryTable entries.
+
+        A value MUST be specified for pingCtlTargetAddress
+        prior to acceptance of a transition to active(1) state.
+
+        When a value for pingCtlTargetAddress is set,
+        the value of object pingCtlRowStatus changes
+        from notReady(3) to notInService(2).
+
+        Activation of a remote ping operation is controlled
+        via pingCtlAdminStatus, not by changing
+        this object's value to active(1).
+
+        Transitions in and out of active(1) state are not
+        allowed while an entry's pingResultsOperStatus is
+        active(1), with the exception that deletion of
+        an entry in this table by setting its RowStatus
+        object to destroy(6) will stop an active
+        ping operation.
+
+        The operational state of a ping operation
+        can be determined by examination of its
+        pingResultsOperStatus object."
+    REFERENCE
+        "See definition of RowStatus in RFC 2579, 'Textual
+        Conventions for SMIv2.'"
+    ::= { pingCtlEntry 23 }
+
+-- Ping Results Table
+
+ pingResultsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PingResultsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the Ping Results Table for providing
+        the capability of performing ping operations at
+        a remote host.  The results of these operations are
+        stored in the pingResultsTable and the pingProbeHistoryTable.
+
+        An entry is added to the pingResultsTable when an
+        pingCtlEntry is started by successful transition
+        of its pingCtlAdminStatus object to enabled(1).
+
+        If the object pingCtlAdminStatus already has the value
+        enabled(1), and if the corresponding pingResultsOperStatus
+        object has the value completed(3), then successfully writing
+        enabled(1) to object pingCtlAdminStatus re-initializes the
+        already existing entry in the pingResultsTable.  The values
+        of objects in the re-initialized entry are the same as the
+        values of objects in a new entry would be.
+
+        An entry is removed from the pingResultsTable when
+        its corresponding pingCtlEntry is deleted."
+   ::= { pingObjects 3 }
+
+ pingResultsEntry OBJECT-TYPE
+    SYNTAX      PingResultsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the pingResultsTable.  The
+        pingResultsTable has the same indexing as the
+        pingCtlTable so that a pingResultsEntry
+        corresponds to the pingCtlEntry that caused it to
+        be created."
+    INDEX {
+             pingCtlOwnerIndex,
+             pingCtlTestName
+          }
+    ::= { pingResultsTable 1 }
+
+ PingResultsEntry ::=
+    SEQUENCE {
+        pingResultsOperStatus          INTEGER,
+        pingResultsIpTargetAddressType InetAddressType,
+        pingResultsIpTargetAddress     InetAddress,
+        pingResultsMinRtt              Unsigned32,
+        pingResultsMaxRtt              Unsigned32,
+        pingResultsAverageRtt          Unsigned32,
+        pingResultsProbeResponses      Gauge32,
+        pingResultsSentProbes          Gauge32,
+        pingResultsRttSumOfSquares     Unsigned32,
+        pingResultsLastGoodProbe       DateAndTime
+     }
+
+ pingResultsOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          enabled(1),   -- test is in progress
+                          disabled(2),  -- test has stopped
+                          completed(3)  -- test is completed
+                        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Reflects the operational state of a pingCtlEntry:
+
+           enabled(1)    - Test is active.
+           disabled(2)   - Test has stopped.
+           completed(3)  - Test is completed."
+    ::= { pingResultsEntry 1 }
+
+ pingResultsIpTargetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the type of address stored
+        in the corresponding pingResultsIpTargetAddress
+        object."
+    DEFVAL { unknown }
+    ::= { pingResultsEntry 2 }
+
+ pingResultsIpTargetAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object reports the IP address associated
+        with a pingCtlTargetAddress value when the destination
+        address is specified as a DNS name.  The value of
+        this object should be a zero-length octet string
+        when a DNS name is not specified or when a
+        specified DNS name fails to resolve.
+
+        The address type (InetAddressType) that relates to
+        this object is specified by the corresponding value
+        of pingResultsIpTargetAddressType."
+    DEFVAL { ''H }
+    ::= { pingResultsEntry 3 }
+
+ pingResultsMinRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The minimum ping round-trip-time (RTT) received.  A value
+        of 0 for this object implies that no RTT has been received."
+    ::= { pingResultsEntry 4 }
+
+ pingResultsMaxRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum ping round-trip-time (RTT) received.  A value
+        of 0 for this object implies that no RTT has been received."
+    ::= { pingResultsEntry 5 }
+
+  pingResultsAverageRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current average ping round-trip-time (RTT)."
+    ::= { pingResultsEntry 6 }
+
+  pingResultsProbeResponses OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "responses"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of responses received for the corresponding
+        pingCtlEntry and pingResultsEntry.  The value of this object
+        MUST be reported as 0 when no probe responses have been
+        received."
+    ::= { pingResultsEntry 7 }
+
+  pingResultsSentProbes OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "probes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object reflects the number of probes sent
+        for the corresponding pingCtlEntry and pingResultsEntry.
+        The value of this object MUST be reported as 0 when no probes
+        have been sent."
+    ::= { pingResultsEntry 8 }
+
+  pingResultsRttSumOfSquares OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains the sum of the squares for all ping
+        responses received.  Its purpose is to enable standard
+        deviation calculation.  The value of this object MUST
+        be reported as 0 when no ping responses have been
+        received."
+    ::= { pingResultsEntry 9 }
+
+ pingResultsLastGoodProbe OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Date and time when the last response was received for
+        a probe."
+    ::= { pingResultsEntry 10 }
+
+ -- Ping Probe History Table
+
+ pingProbeHistoryTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PingProbeHistoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines a table for storing the results of ping
+        operations.  The number of entries in this table is
+        limited per entry in the pingCtlTable by the value
+        of the corresponding pingCtlMaxRows object.
+
+        An entry in this table is created when the result of
+        a ping probe is determined.  The initial 2 instance
+        identifier index values identify the pingCtlEntry
+        that a probe result (pingProbeHistoryEntry) belongs
+        to.  An entry is removed from this table when
+        its corresponding pingCtlEntry is deleted.
+
+        An implementation of this MIB will remove the oldest
+        entry in the pingProbeHistoryTable of the
+        corresponding entry in the pingCtlTable to allow
+        the addition of an new entry once the number of rows
+        in the pingProbeHistoryTable reaches the value
+        specified by pingCtlMaxRows for the corresponding
+        entry in the pingCtlTable."
+   ::= { pingObjects 4 }
+
+ pingProbeHistoryEntry OBJECT-TYPE
+    SYNTAX      PingProbeHistoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the pingProbeHistoryTable.
+        The first two index elements identify the
+        pingCtlEntry that a pingProbeHistoryEntry belongs
+        to.  The third index element selects a single
+        probe result."
+    INDEX {
+
+             pingCtlOwnerIndex,
+             pingCtlTestName,
+             pingProbeHistoryIndex
+           }
+    ::= { pingProbeHistoryTable 1 }
+
+ PingProbeHistoryEntry ::=
+    SEQUENCE {
+        pingProbeHistoryIndex         Unsigned32,
+        pingProbeHistoryResponse      Unsigned32,
+        pingProbeHistoryStatus        OperationResponseStatus,
+        pingProbeHistoryLastRC        Integer32,
+        pingProbeHistoryTime          DateAndTime
+    }
+
+ pingProbeHistoryIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..'ffffffff'h)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table is created when the result of
+        a ping probe is determined.  The initial 2 instance
+        identifier index values identify the pingCtlEntry
+        that a probe result (pingProbeHistoryEntry) belongs
+        to.
+
+        An implementation MUST start assigning
+        pingProbeHistoryIndex values at 1 and wrap after
+        exceeding the maximum possible value as defined by
+        the limit of this object ('ffffffff'h)."
+    ::= { pingProbeHistoryEntry 1 }
+
+ pingProbeHistoryResponse OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The amount of time measured in milliseconds from when
+        a probe was sent to when its response was received or
+        when it timed out.  The value of this object is reported
+        as 0 when it is not possible to transmit a probe."
+    ::= { pingProbeHistoryEntry 2 }
+
+ pingProbeHistoryStatus OBJECT-TYPE
+    SYNTAX      OperationResponseStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The result of a particular probe done by a remote host."
+    ::= { pingProbeHistoryEntry 3 }
+
+ pingProbeHistoryLastRC        OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The last implementation-method-specific reply code received.
+        If the ICMP Echo capability is being used, then a successful
+        probe ends when an ICMP response is received that contains
+        the code ICMP_ECHOREPLY(0).  The ICMP codes are maintained
+        by IANA.  Standardized ICMP codes are listed at
+        http://www.iana.org/assignments/icmp-parameters.
+        The ICMPv6 codes are listed at
+        http://www.iana.org/assignments/icmpv6-parameters."
+    ::= { pingProbeHistoryEntry 4 }
+
+ pingProbeHistoryTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Timestamp for when this probe result was determined."
+    ::= { pingProbeHistoryEntry 5 }
+
+ -- Notification Definition section
+
+ pingProbeFailed NOTIFICATION-TYPE
+      OBJECTS {
+        pingCtlTargetAddressType,
+        pingCtlTargetAddress,
+        pingResultsOperStatus,
+        pingResultsIpTargetAddressType,
+        pingResultsIpTargetAddress,
+        pingResultsMinRtt,
+        pingResultsMaxRtt,
+        pingResultsAverageRtt,
+        pingResultsProbeResponses,
+        pingResultsSentProbes,
+        pingResultsRttSumOfSquares,
+        pingResultsLastGoodProbe
+      }
+      STATUS  current
+      DESCRIPTION
+          "Generated when a probe failure is detected, when the
+
+          corresponding pingCtlTrapGeneration object is set to
+          probeFailure(0), subject to the value of
+          pingCtlTrapProbeFailureFilter.  The object
+          pingCtlTrapProbeFailureFilter can be used to specify the
+          number of consecutive probe failures that are required
+          before this notification can be generated."
+      ::= { pingNotifications 1 }
+
+ pingTestFailed NOTIFICATION-TYPE
+      OBJECTS {
+        pingCtlTargetAddressType,
+        pingCtlTargetAddress,
+        pingResultsOperStatus,
+        pingResultsIpTargetAddressType,
+        pingResultsIpTargetAddress,
+        pingResultsMinRtt,
+        pingResultsMaxRtt,
+        pingResultsAverageRtt,
+        pingResultsProbeResponses,
+        pingResultsSentProbes,
+        pingResultsRttSumOfSquares,
+        pingResultsLastGoodProbe
+      }
+      STATUS  current
+      DESCRIPTION
+          "Generated when a ping test is determined to have failed,
+          when the corresponding pingCtlTrapGeneration object is
+          set to testFailure(1).  In this instance,
+          pingCtlTrapTestFailureFilter should specify the number of
+          probes in a test required to have failed in order to
+          consider the test failed."
+      ::= { pingNotifications 2 }
+
+ pingTestCompleted NOTIFICATION-TYPE
+      OBJECTS {
+        pingCtlTargetAddressType,
+        pingCtlTargetAddress,
+        pingResultsOperStatus,
+        pingResultsIpTargetAddressType,
+        pingResultsIpTargetAddress,
+        pingResultsMinRtt,
+        pingResultsMaxRtt,
+        pingResultsAverageRtt,
+        pingResultsProbeResponses,
+        pingResultsSentProbes,
+        pingResultsRttSumOfSquares,
+        pingResultsLastGoodProbe
+
+      }
+      STATUS  current
+      DESCRIPTION
+          "Generated at the completion of a ping test when the
+          corresponding pingCtlTrapGeneration object has the
+          testCompletion(2) bit set."
+      ::= { pingNotifications 3 }
+
+ -- Conformance information
+
+ -- Compliance statements
+
+ pingCompliances OBJECT IDENTIFIER ::= { pingConformance 1 }
+ pingGroups      OBJECT IDENTIFIER ::= { pingConformance 2 }
+
+ -- Compliance statements
+
+ pingFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities that
+            fully implement the DISMAN-PING-MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                            pingMinimumGroup,
+                            pingCtlRowStatusGroup,
+                            pingHistoryGroup,
+                            pingNotificationsGroup
+                          }
+
+        OBJECT pingMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT pingCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+            value that MUST be supported by an implementation is
+            pingIcmpEcho."
+
+        OBJECT pingCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of its
+            implementation.  The function represented by this
+            object is implementable if the setsockopt
+            SOL_SOCKET SO_DONTROUTE option is supported."
+
+        OBJECT pingCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingResultsIpTargetAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation is only required to
+
+            support IPv4 and IPv6 addresses."
+
+        OBJECT pingResultsIpTargetAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+
+        OBJECT pingResultsLastGoodProbe
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+
+        OBJECT pingProbeHistoryTime
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+    ::= { pingCompliances 2 }
+
+ pingMinimumCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The minimum compliance statement for SNMP entities
+            that implement the minimal subset of the
+            DISMAN-PING-MIB.  Implementors might choose this
+            subset for small devices with limited resources."
+    MODULE  -- this module
+        MANDATORY-GROUPS { pingMinimumGroup }
+
+        GROUP pingCtlRowStatusGroup
+        DESCRIPTION
+            "A compliant implementation does not have to implement
+            the pingCtlRowStatusGroup."
+
+        GROUP pingHistoryGroup
+        DESCRIPTION
+            "A compliant implementation does not have to implement
+            the pingHistoryGroup."
+
+        GROUP pingNotificationsGroup
+        DESCRIPTION
+            "A compliant implementation does not have to implement
+
+            the pingNotificationsGroup."
+
+        OBJECT pingMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlDataFill
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlFrequency
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingCtlMaxRows
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If the
+            pingHistoryGroup is not implemented, then write
+            access to this object MUST be disabled, and the object
+            MUST return a value of 0 when retrieved."
+
+        OBJECT pingCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT pingCtlTrapGeneration
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If the
+            pingNotificationsGroup is not implemented, then write
+            access to this object MUST be disabled, and the object
+            MUST return a value with no bit set when retrieved.
+            No bit set indicates that not notification is
+            generated."
+
+        OBJECT pingCtlTrapProbeFailureFilter
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "If write access to pingCtlTrapGeneration is not
+            supported, then write access to this object must also
+            not be supported.  In this case, return 0 as the value
+            of this object."
+
+        OBJECT pingCtlTrapTestFailureFilter
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "If write access to pingCtlTrapGeneration is not
+            supported, then write access to this object must also
+            not be supported.  In this case, return 0 as the value
+            of this object."
+
+        OBJECT pingCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+            value that MUST be supported by an implementation is
+            pingIcmpEcho."
+
+        OBJECT pingCtlDescr
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return false(2) as the value of this
+            object.  A value of false(2) means that the function
+            represented by this option is not supported."
+
+        OBJECT pingCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingResultsIpTargetAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and IPv6 addresses."
+
+        OBJECT pingResultsIpTargetAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+
+        OBJECT pingResultsLastGoodProbe
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+
+        OBJECT pingProbeHistoryTime
+        DESCRIPTION
+            "If the pingHistoryGroup is implemented, then this
+            object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+
+            be reported as '0000000000000000'H."
+    ::= { pingCompliances 3 }
+
+ pingCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for the DISMAN-PING-MIB.  This
+            compliance statement has been deprecated because the
+            group pingGroup and the pingTimeStampGroup have been
+            split and deprecated.  The pingFullCompliance statement
+            is semantically identical to the deprecated
+            pingCompliance statement."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                            pingGroup,
+                            pingNotificationsGroup
+                          }
+        GROUP pingTimeStampGroup
+        DESCRIPTION
+            "This group is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this group is not supported the values
+            for the objects in this group be reported as
+            '0000000000000000'H."
+
+        OBJECT pingMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  It is also allowed
+            that implementations support only the volatile
+            StorageType enumeration."
+
+        OBJECT pingCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+            value that MUST be supported by an implementation is
+            pingIcmpEcho."
+
+        OBJECT pingCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of its implementation.  The function
+            represented by this object is implementable if the
+            setsockopt SOL_SOCKET SO_DONTROUTE option is
+            supported."
+
+        OBJECT pingCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of binding the send socket with a
+            source address.  An implementation is only required to
+            support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of binding the send socket with a
+            source address.  An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+
+        OBJECT pingCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  When write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  When write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingResultsIpTargetAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and IPv6 addresses."
+
+        OBJECT pingResultsIpTargetAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+    ::= { pingCompliances 1 }
+
+ -- MIB groupings
+
+ pingMinimumGroup OBJECT-GROUP
+   OBJECTS {
+             pingMaxConcurrentRequests,
+             pingCtlTargetAddressType,
+             pingCtlTargetAddress,
+             pingCtlDataSize,
+             pingCtlTimeOut,
+             pingCtlProbeCount,
+             pingCtlAdminStatus,
+             pingCtlDataFill,
+             pingCtlFrequency,
+             pingCtlMaxRows,
+             pingCtlStorageType,
+             pingCtlTrapGeneration,
+             pingCtlTrapProbeFailureFilter,
+             pingCtlTrapTestFailureFilter,
+             pingCtlType,
+             pingCtlDescr,
+             pingCtlByPassRouteTable,
+             pingCtlSourceAddressType,
+             pingCtlSourceAddress,
+             pingCtlIfIndex,
+             pingCtlDSField,
+             pingResultsOperStatus,
+             pingResultsIpTargetAddressType,
+             pingResultsIpTargetAddress,
+             pingResultsMinRtt,
+             pingResultsMaxRtt,
+             pingResultsAverageRtt,
+             pingResultsProbeResponses,
+             pingResultsSentProbes,
+             pingResultsRttSumOfSquares,
+             pingResultsLastGoodProbe
+           }
+   STATUS  current
+   DESCRIPTION
+       "The group of objects that constitute the remote ping
+       capability."
+    ::= { pingGroups 4 }
+
+ pingCtlRowStatusGroup OBJECT-GROUP
+   OBJECTS {
+             pingCtlRowStatus
+           }
+   STATUS  current
+   DESCRIPTION
+       "The RowStatus object of the pingCtlTable."
+    ::= { pingGroups 5 }
+
+ pingHistoryGroup OBJECT-GROUP
+   OBJECTS {
+             pingProbeHistoryResponse,
+             pingProbeHistoryStatus,
+             pingProbeHistoryLastRC,
+             pingProbeHistoryTime
+           }
+   STATUS  current
+   DESCRIPTION
+       "The group of objects that constitute the history
+       capability."
+    ::= { pingGroups 6 }
+
+ pingNotificationsGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+             pingProbeFailed,
+             pingTestFailed,
+             pingTestCompleted
+          }
+   STATUS        current
+   DESCRIPTION
+       "The notification that are required to be supported by
+       implementations of this MIB."
+   ::= { pingGroups 3 }
+
+ pingGroup OBJECT-GROUP
+   OBJECTS {
+             pingMaxConcurrentRequests,
+             pingCtlTargetAddressType,
+             pingCtlTargetAddress,
+             pingCtlDataSize,
+             pingCtlTimeOut,
+             pingCtlProbeCount,
+             pingCtlAdminStatus,
+             pingCtlDataFill,
+             pingCtlFrequency,
+             pingCtlMaxRows,
+             pingCtlStorageType,
+             pingCtlTrapGeneration,
+             pingCtlTrapProbeFailureFilter,
+             pingCtlTrapTestFailureFilter,
+             pingCtlType,
+             pingCtlDescr,
+             pingCtlByPassRouteTable,
+             pingCtlSourceAddressType,
+             pingCtlSourceAddress,
+             pingCtlIfIndex,
+             pingCtlDSField,
+             pingCtlRowStatus,
+             pingResultsOperStatus,
+             pingResultsIpTargetAddressType,
+             pingResultsIpTargetAddress,
+             pingResultsMinRtt,
+             pingResultsMaxRtt,
+             pingResultsAverageRtt,
+             pingResultsProbeResponses,
+             pingResultsSentProbes,
+             pingResultsRttSumOfSquares,
+             pingProbeHistoryResponse,
+             pingProbeHistoryStatus,
+             pingProbeHistoryLastRC
+           }
+   STATUS  deprecated
+   DESCRIPTION
+       "The group of objects that constitute the remote ping
+       capability."
+    ::= { pingGroups 1 }
+
+ pingTimeStampGroup OBJECT-GROUP
+
+   OBJECTS {
+             pingResultsLastGoodProbe,
+             pingProbeHistoryTime
+           }
+   STATUS  deprecated
+   DESCRIPTION
+       "The group of DateAndTime objects."
+    ::= { pingGroups 2 }
+
+END