Imported Upstream version 5.7.2.1~dfsgupstream/5.7.2.1_dfsgupstream

1 files changed, 660 insertions, 0 deletions

diff --git a/mibs/SNMP-TARGET-MIB.txt b/mibs/SNMP-TARGET-MIB.txt
new file mode 100644
index 0000000..654afdd
--- /dev/null
+++ b/mibs/SNMP-TARGET-MIB.txt
@@ -0,0 +1,660 @@
+SNMP-TARGET-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    snmpModules,
+    Counter32,
+    Integer32
+        FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION,
+    TDomain,
+    TAddress,
+    TimeInterval,
+    RowStatus,
+    StorageType,
+    TestAndIncr
+        FROM SNMPv2-TC
+
+    SnmpSecurityModel,
+    SnmpMessageProcessingModel,
+    SnmpSecurityLevel,
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+snmpTargetMIB MODULE-IDENTITY
+    LAST-UPDATED "200210140000Z"
+    ORGANIZATION "IETF SNMPv3 Working Group"
+    CONTACT-INFO
+        "WG-email:   snmpv3@lists.tislabs.com
+         Subscribe:  majordomo@lists.tislabs.com
+                     In message body:  subscribe snmpv3
+
+         Co-Chair:   Russ Mundy
+                     Network Associates Laboratories
+         Postal:     15204 Omega Drive, Suite 300
+                     Rockville, MD 20850-4601
+                     USA
+         EMail:      mundy@tislabs.com
+         Phone:      +1 301-947-7107
+
+         Co-Chair:   David Harrington
+                     Enterasys Networks
+         Postal:     35 Industrial Way
+                     P. O. Box 5004
+                     Rochester, New Hampshire 03866-5005
+                     USA
+         EMail:      dbh@enterasys.com
+         Phone:      +1 603-337-2614
+
+         Co-editor:  David B. Levi
+                     Nortel Networks
+         Postal:     3505 Kesterwood Drive
+                     Knoxville, Tennessee 37918
+         EMail:      dlevi@nortelnetworks.com
+         Phone:      +1 865 686 0432
+
+         Co-editor:  Paul Meyer
+                     Secure Computing Corporation
+         Postal:     2675 Long Lake Road
+
+                     Roseville, Minnesota 55113
+         EMail:      paul_meyer@securecomputing.com
+         Phone:      +1 651 628 1592
+
+         Co-editor:  Bob Stewart
+                     Retired"
+    DESCRIPTION
+        "This MIB module defines MIB objects which provide
+         mechanisms to remotely configure the parameters used
+         by an SNMP entity for the generation of SNMP messages.
+
+         Copyright (C) The Internet Society (2002). This
+         version of this MIB module is part of RFC 3413;
+         see the RFC itself for full legal notices.
+        "
+    REVISION    "200210140000Z"             -- 14 October 2002
+    DESCRIPTION "Fixed DISPLAY-HINTS for UTF-8 strings, fixed hex
+                 value of LF characters, clarified meaning of zero
+                 length tag values, improved tag list examples.
+                 Published as RFC 3413."
+    REVISION    "199808040000Z"             -- 4 August 1998
+    DESCRIPTION "Clarifications, published as
+                 RFC 2573."
+    REVISION    "199707140000Z"             -- 14 July 1997
+    DESCRIPTION "The initial revision, published as RFC2273."
+    ::= { snmpModules 12 }
+
+snmpTargetObjects       OBJECT IDENTIFIER ::= { snmpTargetMIB 1 }
+snmpTargetConformance   OBJECT IDENTIFIER ::= { snmpTargetMIB 3 }
+
+SnmpTagValue ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255t"
+    STATUS       current
+    DESCRIPTION
+        "An octet string containing a tag value.
+         Tag values are preferably in human-readable form.
+
+         To facilitate internationalization, this information
+         is represented using the ISO/IEC IS 10646-1 character
+         set, encoded as an octet string using the UTF-8
+         character encoding scheme described in RFC 2279.
+
+         Since additional code points are added by amendments
+         to the 10646 standard from time to time,
+         implementations must be prepared to encounter any code
+         point from 0x00000000 to 0x7fffffff.
+
+         The use of control codes should be avoided, and certain
+
+         control codes are not allowed as described below.
+
+         For code points not directly supported by user
+         interface hardware or software, an alternative means
+         of entry and display, such as hexadecimal, may be
+         provided.
+
+         For information encoded in 7-bit US-ASCII, the UTF-8
+         representation is identical to the US-ASCII encoding.
+
+         Note that when this TC is used for an object that
+         is used or envisioned to be used as an index, then a
+         SIZE restriction must be specified so that the number
+         of sub-identifiers for any object instance does not
+         exceed the limit of 128, as defined by [RFC1905].
+
+         An object of this type contains a single tag value
+         which is used to select a set of entries in a table.
+
+         A tag value is an arbitrary string of octets, but
+         may not contain a delimiter character.  Delimiter
+         characters are defined to be one of the following:
+
+             -  An ASCII space character (0x20).
+
+             -  An ASCII TAB character (0x09).
+
+             -  An ASCII carriage return (CR) character (0x0D).
+
+             -  An ASCII line feed (LF) character (0x0A).
+
+         Delimiter characters are used to separate tag values
+         in a tag list.  An object of this type may only
+         contain a single tag value, and so delimiter
+         characters are not allowed in a value of this type.
+
+         Note that a tag value of 0 length means that no tag is
+         defined.  In other words, a tag value of 0 length would
+         never match anything in a tag list, and would never
+         select any table entries.
+
+         Some examples of valid tag values are:
+
+             - 'acme'
+
+             - 'router'
+
+             - 'host'
+
+         The use of a tag value to select table entries is
+         application and MIB specific."
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+SnmpTagList ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255t"
+    STATUS       current
+    DESCRIPTION
+        "An octet string containing a list of tag values.
+         Tag values are preferably in human-readable form.
+
+         To facilitate internationalization, this information
+         is represented using the ISO/IEC IS 10646-1 character
+         set, encoded as an octet string using the UTF-8
+         character encoding scheme described in RFC 2279.
+
+         Since additional code points are added by amendments
+         to the 10646 standard from time to time,
+         implementations must be prepared to encounter any code
+         point from 0x00000000 to 0x7fffffff.
+
+         The use of control codes should be avoided, except as
+         described below.
+
+         For code points not directly supported by user
+         interface hardware or software, an alternative means
+         of entry and display, such as hexadecimal, may be
+         provided.
+
+         For information encoded in 7-bit US-ASCII, the UTF-8
+         representation is identical to the US-ASCII encoding.
+
+         An object of this type contains a list of tag values
+         which are used to select a set of entries in a table.
+
+         A tag value is an arbitrary string of octets, but
+         may not contain a delimiter character.  Delimiter
+         characters are defined to be one of the following:
+
+             -  An ASCII space character (0x20).
+
+             -  An ASCII TAB character (0x09).
+
+             -  An ASCII carriage return (CR) character (0x0D).
+
+             -  An ASCII line feed (LF) character (0x0A).
+
+         Delimiter characters are used to separate tag values
+
+         in a tag list.  Only a single delimiter character may
+         occur between two tag values.  A tag value may not
+         have a zero length.  These constraints imply certain
+         restrictions on the contents of this object:
+
+             - There cannot be a leading or trailing delimiter
+               character.
+
+             - There cannot be multiple adjacent delimiter
+               characters.
+
+         Some examples of valid tag lists are:
+
+             - ''                        -- an empty list
+
+             - 'acme'                    -- list of one tag
+
+             - 'host router bridge'      -- list of several tags
+
+         Note that although a tag value may not have a length of
+         zero, an empty string is still valid.  This indicates
+         an empty list (i.e. there are no tag values in the list).
+
+         The use of the tag list to select table entries is
+         application and MIB specific.  Typically, an application
+         will provide one or more tag values, and any entry
+         which contains some combination of these tag values
+         will be selected."
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+--
+--
+-- The snmpTargetObjects group
+--
+--
+
+snmpTargetSpinLock OBJECT-TYPE
+    SYNTAX      TestAndIncr
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object is used to facilitate modification of table
+         entries in the SNMP-TARGET-MIB module by multiple
+         managers.  In particular, it is useful when modifying
+         the value of the snmpTargetAddrTagList object.
+
+         The procedure for modifying the snmpTargetAddrTagList
+         object is as follows:
+
+             1.  Retrieve the value of snmpTargetSpinLock and
+                 of snmpTargetAddrTagList.
+
+             2.  Generate a new value for snmpTargetAddrTagList.
+
+             3.  Set the value of snmpTargetSpinLock to the
+                 retrieved value, and the value of
+                 snmpTargetAddrTagList to the new value.  If
+                 the set fails for the snmpTargetSpinLock
+                 object, go back to step 1."
+    ::= { snmpTargetObjects 1 }
+
+snmpTargetAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SnmpTargetAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of transport addresses to be used in the generation
+         of SNMP messages."
+    ::= { snmpTargetObjects 2 }
+
+snmpTargetAddrEntry OBJECT-TYPE
+    SYNTAX      SnmpTargetAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A transport address to be used in the generation
+         of SNMP operations.
+
+         Entries in the snmpTargetAddrTable are created and
+         deleted using the snmpTargetAddrRowStatus object."
+    INDEX { IMPLIED snmpTargetAddrName }
+    ::= { snmpTargetAddrTable 1 }
+
+SnmpTargetAddrEntry ::= SEQUENCE {
+    snmpTargetAddrName         SnmpAdminString,
+    snmpTargetAddrTDomain      TDomain,
+    snmpTargetAddrTAddress     TAddress,
+    snmpTargetAddrTimeout      TimeInterval,
+    snmpTargetAddrRetryCount   Integer32,
+    snmpTargetAddrTagList      SnmpTagList,
+    snmpTargetAddrParams       SnmpAdminString,
+    snmpTargetAddrStorageType  StorageType,
+    snmpTargetAddrRowStatus    RowStatus
+}
+
+snmpTargetAddrName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this snmpTargetAddrEntry."
+    ::= { snmpTargetAddrEntry 1 }
+
+snmpTargetAddrTDomain OBJECT-TYPE
+    SYNTAX      TDomain
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the transport type of the address
+         contained in the snmpTargetAddrTAddress object."
+    ::= { snmpTargetAddrEntry 2 }
+
+snmpTargetAddrTAddress OBJECT-TYPE
+    SYNTAX      TAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object contains a transport address.  The format of
+         this address depends on the value of the
+         snmpTargetAddrTDomain object."
+    ::= { snmpTargetAddrEntry 3 }
+
+snmpTargetAddrTimeout OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object should reflect the expected maximum round
+         trip time for communicating with the transport address
+         defined by this row.  When a message is sent to this
+         address, and a response (if one is expected) is not
+         received within this time period, an implementation
+         may assume that the response will not be delivered.
+
+         Note that the time interval that an application waits
+         for a response may actually be derived from the value
+         of this object.  The method for deriving the actual time
+         interval is implementation dependent.  One such method
+         is to derive the expected round trip time based on a
+         particular retransmission algorithm and on the number
+         of timeouts which have occurred.  The type of message may
+         also be considered when deriving expected round trip
+         times for retransmissions.  For example, if a message is
+         being sent with a securityLevel that indicates both
+
+         authentication and privacy, the derived value may be
+         increased to compensate for extra processing time spent
+         during authentication and encryption processing."
+    DEFVAL { 1500 }
+    ::= { snmpTargetAddrEntry 4 }
+
+snmpTargetAddrRetryCount OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object specifies a default number of retries to be
+         attempted when a response is not received for a generated
+         message.  An application may provide its own retry count,
+         in which case the value of this object is ignored."
+    DEFVAL { 3 }
+    ::= { snmpTargetAddrEntry 5 }
+
+snmpTargetAddrTagList OBJECT-TYPE
+    SYNTAX      SnmpTagList
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object contains a list of tag values which are
+         used to select target addresses for a particular
+         operation."
+    DEFVAL { "" }
+    ::= { snmpTargetAddrEntry 6 }
+
+snmpTargetAddrParams OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object identifies an entry in the
+         snmpTargetParamsTable.  The identified entry
+         contains SNMP parameters to be used when generating
+         messages to be sent to this transport address."
+    ::= { snmpTargetAddrEntry 7 }
+
+snmpTargetAddrStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { snmpTargetAddrEntry 8 }
+
+snmpTargetAddrRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.
+
+         To create a row in this table, a manager must
+         set this object to either createAndGo(4) or
+         createAndWait(5).
+
+         Until instances of all corresponding columns are
+         appropriately configured, the value of the
+         corresponding instance of the snmpTargetAddrRowStatus
+         column is 'notReady'.
+
+         In particular, a newly created row cannot be made
+         active until the corresponding instances of
+         snmpTargetAddrTDomain, snmpTargetAddrTAddress, and
+         snmpTargetAddrParams have all been set.
+
+         The following objects may not be modified while the
+         value of this object is active(1):
+             - snmpTargetAddrTDomain
+             - snmpTargetAddrTAddress
+         An attempt to set these objects while the value of
+         snmpTargetAddrRowStatus is active(1) will result in
+         an inconsistentValue error."
+    ::= { snmpTargetAddrEntry 9 }
+
+snmpTargetParamsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SnmpTargetParamsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of SNMP target information to be used
+         in the generation of SNMP messages."
+    ::= { snmpTargetObjects 3 }
+
+snmpTargetParamsEntry OBJECT-TYPE
+    SYNTAX      SnmpTargetParamsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of SNMP target information.
+
+         Entries in the snmpTargetParamsTable are created and
+         deleted using the snmpTargetParamsRowStatus object."
+    INDEX { IMPLIED snmpTargetParamsName }
+    ::= { snmpTargetParamsTable 1 }
+
+SnmpTargetParamsEntry ::= SEQUENCE {
+    snmpTargetParamsName           SnmpAdminString,
+    snmpTargetParamsMPModel        SnmpMessageProcessingModel,
+    snmpTargetParamsSecurityModel  SnmpSecurityModel,
+    snmpTargetParamsSecurityName   SnmpAdminString,
+    snmpTargetParamsSecurityLevel  SnmpSecurityLevel,
+    snmpTargetParamsStorageType    StorageType,
+    snmpTargetParamsRowStatus      RowStatus
+}
+
+snmpTargetParamsName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this snmpTargetParamsEntry."
+    ::= { snmpTargetParamsEntry 1 }
+
+snmpTargetParamsMPModel OBJECT-TYPE
+    SYNTAX      SnmpMessageProcessingModel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Message Processing Model to be used when generating
+         SNMP messages using this entry."
+    ::= { snmpTargetParamsEntry 2 }
+
+snmpTargetParamsSecurityModel OBJECT-TYPE
+    SYNTAX      SnmpSecurityModel (1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Security Model to be used when generating SNMP
+          messages using this entry.  An implementation may
+          choose to return an inconsistentValue error if an
+          attempt is made to set this variable to a value
+          for a security model which the implementation does
+          not support."
+    ::= { snmpTargetParamsEntry 3 }
+
+snmpTargetParamsSecurityName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The securityName which identifies the Principal on
+         whose behalf SNMP messages will be generated using
+         this entry."
+    ::= { snmpTargetParamsEntry 4 }
+
+snmpTargetParamsSecurityLevel OBJECT-TYPE
+    SYNTAX      SnmpSecurityLevel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Level of Security to be used when generating
+         SNMP messages using this entry."
+    ::= { snmpTargetParamsEntry 5 }
+
+snmpTargetParamsStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { snmpTargetParamsEntry 6 }
+
+snmpTargetParamsRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.
+
+         To create a row in this table, a manager must
+         set this object to either createAndGo(4) or
+         createAndWait(5).
+
+         Until instances of all corresponding columns are
+         appropriately configured, the value of the
+         corresponding instance of the snmpTargetParamsRowStatus
+         column is 'notReady'.
+
+         In particular, a newly created row cannot be made
+         active until the corresponding
+         snmpTargetParamsMPModel,
+         snmpTargetParamsSecurityModel,
+         snmpTargetParamsSecurityName,
+         and snmpTargetParamsSecurityLevel have all been set.
+
+         The following objects may not be modified while the
+         value of this object is active(1):
+             - snmpTargetParamsMPModel
+             - snmpTargetParamsSecurityModel
+             - snmpTargetParamsSecurityName
+             - snmpTargetParamsSecurityLevel
+         An attempt to set these objects while the value of
+         snmpTargetParamsRowStatus is active(1) will result in
+         an inconsistentValue error."
+    ::= { snmpTargetParamsEntry 7 }
+
+snmpUnavailableContexts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The total number of packets received by the SNMP
+         engine which were dropped because the context
+         contained in the message was unavailable."
+    ::= { snmpTargetObjects 4 }
+
+snmpUnknownContexts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The total number of packets received by the SNMP
+         engine which were dropped because the context
+         contained in the message was unknown."
+    ::= { snmpTargetObjects 5 }
+
+--
+--
+-- Conformance information
+--
+--
+
+snmpTargetCompliances OBJECT IDENTIFIER ::=
+                                        { snmpTargetConformance 1 }
+snmpTargetGroups      OBJECT IDENTIFIER ::=
+                                        { snmpTargetConformance 2 }
+
+--
+--
+-- Compliance statements
+
+--
+--
+
+snmpTargetCommandResponderCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which include
+         a command responder application."
+    MODULE -- This Module
+        MANDATORY-GROUPS { snmpTargetCommandResponderGroup }
+    ::= { snmpTargetCompliances 1 }
+
+snmpTargetBasicGroup OBJECT-GROUP
+    OBJECTS {
+        snmpTargetSpinLock,
+        snmpTargetAddrTDomain,
+        snmpTargetAddrTAddress,
+        snmpTargetAddrTagList,
+        snmpTargetAddrParams,
+        snmpTargetAddrStorageType,
+        snmpTargetAddrRowStatus,
+        snmpTargetParamsMPModel,
+        snmpTargetParamsSecurityModel,
+        snmpTargetParamsSecurityName,
+        snmpTargetParamsSecurityLevel,
+        snmpTargetParamsStorageType,
+        snmpTargetParamsRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing basic remote
+         configuration of management targets."
+    ::= { snmpTargetGroups 1 }
+
+snmpTargetResponseGroup OBJECT-GROUP
+    OBJECTS {
+        snmpTargetAddrTimeout,
+        snmpTargetAddrRetryCount
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing remote configuration
+         of management targets for applications which generate
+         SNMP messages for which a response message would be
+         expected."
+    ::= { snmpTargetGroups 2 }
+
+snmpTargetCommandResponderGroup OBJECT-GROUP
+
+    OBJECTS {
+        snmpUnavailableContexts,
+        snmpUnknownContexts
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects required for command responder
+         applications, used for counting error conditions."
+    ::= { snmpTargetGroups 3 }
+
+END