diff options
Diffstat (limited to 'mibs/DISMAN-TRACEROUTE-MIB.txt')
| -rw-r--r-- | mibs/DISMAN-TRACEROUTE-MIB.txt | 1850 |
1 files changed, 1850 insertions, 0 deletions
diff --git a/mibs/DISMAN-TRACEROUTE-MIB.txt b/mibs/DISMAN-TRACEROUTE-MIB.txt new file mode 100644 index 0000000..d207b24 --- /dev/null +++ b/mibs/DISMAN-TRACEROUTE-MIB.txt @@ -0,0 +1,1850 @@ +DISMAN-TRACEROUTE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, + Gauge32, Unsigned32, mib-2, + NOTIFICATION-TYPE, + OBJECT-IDENTITY + FROM SNMPv2-SMI -- RFC2578 + RowStatus, StorageType, + TruthValue, DateAndTime + FROM SNMPv2-TC -- RFC2579 + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP + FROM SNMPv2-CONF -- RFC2580 + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB -- RFC3411 + InterfaceIndexOrZero -- RFC2863 + FROM IF-MIB + InetAddressType, InetAddress + FROM INET-ADDRESS-MIB -- RFC4001 + OperationResponseStatus + FROM DISMAN-PING-MIB; -- RFC4560 + + traceRouteMIB MODULE-IDENTITY + LAST-UPDATED "200606130000Z" -- 13 June 2006 + ORGANIZATION "IETF Distributed Management Working Group" + CONTACT-INFO + "Juergen Quittek + + NEC Europe Ltd. + Network Laboratories + Kurfuersten-Anlage 36 + 69115 Heidelberg + Germany + + Phone: +49 6221 4342-115 + Email: quittek@netlab.nec.de" + DESCRIPTION + "The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides + access to the traceroute capability at a remote host. + + Copyright (C) The Internet Society (2006). This version of + this MIB module is part of RFC 4560; see the RFC itself for + full legal notices." + + -- Revision history + + REVISION "200606130000Z" -- 13 June 2006 + DESCRIPTION + "Updated version, published as RFC 4560. + - Correctly considered IPv6 in DESCRIPTION clause of + object traceRouteCtlDataSize + - Replaced references to RFC 2575 by RFC 3415 + - Replaced references to RFC 2571 by RFC 3411 + - Replaced references to RFC 2851 by RFC 4001 + - Clarified DESCRIPTION clause of object + traceRouteResultsLastGoodPath + - Changed range of object traceRouteCtlInitialTtl + from (0..255) to (1..255) + - Extended DESCRIPTION clause of traceRouteResultsTable + describing re-initialization of entries + - Changed SYNTAX of traceRouteResultsTestAttempts and + traceRouteResultsTestSuccesses from Unsigned32 to + Gauge32 + - Changed status of traceRouteCompliance to deprecated + - Added traceRouteFullCompliance and + traceRouteMinimumCompliance + - Changed status of traceRouteGroup and + traceRouteTimeStampGroup to deprecated + - Added traceRouteMinimumGroup, + traceRouteCtlRowStatusGroup, and + traceRouteHistoryGroup + - Changed DEFVAL of object + traceRouteCtlTargetAddressType from { ipv4 } + to { unknown } + - Changed DEFVAL of object traceRouteCtlDescr + from { '00'H } to { ''H } + - Added DEFVAL for object traceRouteCtlTrapGeneration + of DEFVAL { { } }" + REVISION "200009210000Z" -- 21 September 2000 + DESCRIPTION + "Initial version, published as RFC 2925." + ::= { mib-2 81 } + + -- Top level structure of the MIB + + traceRouteNotifications OBJECT IDENTIFIER ::= { traceRouteMIB 0 } + traceRouteObjects OBJECT IDENTIFIER ::= { traceRouteMIB 1 } + traceRouteConformance OBJECT IDENTIFIER ::= { traceRouteMIB 2 } + + -- The registration node (point) for traceroute implementation types + + traceRouteImplementationTypeDomains OBJECT IDENTIFIER + ::= { traceRouteMIB 3 } + + traceRouteUsingUdpProbes OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Indicates that an implementation is using UDP probes to + perform the traceroute operation." + ::= { traceRouteImplementationTypeDomains 1 } + + -- Simple Object Definitions + + traceRouteMaxConcurrentRequests OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "requests" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of concurrent active traceroute requests + that are allowed within an agent implementation. A value + of 0 for this object implies that there is no limit for + the number of concurrent active requests in effect. + + The limit applies only to new requests being activated. + When a new value is set, the agent will continue processing + all the requests already active, even if their number + exceeds the limit just imposed." + DEFVAL { 10 } + ::= { traceRouteObjects 1 } + + -- Traceroute Control Table + + traceRouteCtlTable OBJECT-TYPE + SYNTAX SEQUENCE OF TraceRouteCtlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines the Remote Operations Traceroute Control Table for + providing the capability of invoking traceroute from a remote + host. The results of traceroute operations can be stored in + the traceRouteResultsTable, traceRouteProbeHistoryTable, and + the traceRouteHopsTable." + ::= { traceRouteObjects 2 } + + traceRouteCtlEntry OBJECT-TYPE + SYNTAX TraceRouteCtlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines an entry in the traceRouteCtlTable. The first + index element, traceRouteCtlOwnerIndex, is of type + SnmpAdminString, a textual convention that allows for + use of the SNMPv3 View-Based Access Control Model + (RFC 3415, VACM) and that allows a management + application to identify its entries. The second index, + traceRouteCtlTestName (also an SnmpAdminString), + enables the same management application to have + multiple requests outstanding." + INDEX { + traceRouteCtlOwnerIndex, + traceRouteCtlTestName + } + ::= { traceRouteCtlTable 1 } + + TraceRouteCtlEntry ::= + SEQUENCE { + traceRouteCtlOwnerIndex SnmpAdminString, + traceRouteCtlTestName SnmpAdminString, + traceRouteCtlTargetAddressType InetAddressType, + traceRouteCtlTargetAddress InetAddress, + traceRouteCtlByPassRouteTable TruthValue, + traceRouteCtlDataSize Unsigned32, + traceRouteCtlTimeOut Unsigned32, + traceRouteCtlProbesPerHop Unsigned32, + traceRouteCtlPort Unsigned32, + traceRouteCtlMaxTtl Unsigned32, + traceRouteCtlDSField Unsigned32, + traceRouteCtlSourceAddressType InetAddressType, + traceRouteCtlSourceAddress InetAddress, + traceRouteCtlIfIndex InterfaceIndexOrZero, + traceRouteCtlMiscOptions SnmpAdminString, + traceRouteCtlMaxFailures Unsigned32, + traceRouteCtlDontFragment TruthValue, + traceRouteCtlInitialTtl Unsigned32, + traceRouteCtlFrequency Unsigned32, + traceRouteCtlStorageType StorageType, + traceRouteCtlAdminStatus INTEGER, + traceRouteCtlDescr SnmpAdminString, + traceRouteCtlMaxRows Unsigned32, + traceRouteCtlTrapGeneration BITS, + traceRouteCtlCreateHopsEntries TruthValue, + traceRouteCtlType OBJECT IDENTIFIER, + traceRouteCtlRowStatus RowStatus + } + + traceRouteCtlOwnerIndex OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "To facilitate the provisioning of access control by a + security administrator using the View-Based Access + Control Model (RFC 3415, VACM) for tables in which + multiple users may need to create or + modify entries independently, the initial index is used as + an 'owner index'. Such an initial index has a syntax of + SnmpAdminString and can thus be trivially mapped to a + securityName or groupName defined in VACM, in + accordance with a security policy. + + When used in conjunction with such a security policy, + all entries in the table belonging to a particular user + (or group) will have the same value for this initial + index. For a given user's entries in a particular + table, the object identifiers for the information in + these entries will have the same subidentifiers (except + for the 'column' subidentifier) up to the end of the + encoded owner index. To configure VACM to permit access + to this portion of the table, one would create + vacmViewTreeFamilyTable entries with the value of + vacmViewTreeFamilySubtree including the owner index + portion, and vacmViewTreeFamilyMask 'wildcarding' the + column subidentifier. More elaborate configurations + are possible." + ::= { traceRouteCtlEntry 1 } + + traceRouteCtlTestName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of a traceroute test. This is locally unique, + within the scope of a traceRouteCtlOwnerIndex." + ::= { traceRouteCtlEntry 2 } + + traceRouteCtlTargetAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the type of host address to be used on the + traceroute request at the remote host." + DEFVAL { unknown } + ::= { traceRouteCtlEntry 3 } + + traceRouteCtlTargetAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the host address used on the + traceroute request at the remote host. The + host address type can be determined by + examining the value of the corresponding + traceRouteCtlTargetAddressType. + + A value for this object MUST be set prior to + transitioning its corresponding traceRouteCtlEntry to + active(1) via traceRouteCtlRowStatus." + ::= { traceRouteCtlEntry 4 } + + traceRouteCtlByPassRouteTable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The purpose of this object is to enable optional + bypassing the route table. If enabled, the remote + host will bypass the normal routing tables and send + directly to a host on an attached network. If the + host is not on a directly attached network, an + error is returned. This option can be used to perform + the traceroute operation to a local host through an + interface that has no route defined (e.g., after the + interface was dropped by the routing daemon at the host)." + DEFVAL { false } + ::= { traceRouteCtlEntry 5 } + + traceRouteCtlDataSize OBJECT-TYPE + SYNTAX Unsigned32 (0..65507) + UNITS "octets" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the size of the data portion of a traceroute + request, in octets. If the RECOMMENDED traceroute method + (UDP datagrams as probes) is used, then the value + contained in this object MUST be applied. If another + traceroute method is used for which the specified size + is not appropriate, then the implementation SHOULD use + whatever size (appropriate to the method) is closest to + the specified size. + + The maximum value for this object was computed by + subtracting the smallest possible IP header size of + 20 octets (IPv4 header with no options) and the UDP + header size of 8 octets from the maximum IP packet size. + An IP packet has a maximum size of 65535 octets + (excluding IPv6 Jumbograms)." + DEFVAL { 0 } + ::= { traceRouteCtlEntry 6 } + + traceRouteCtlTimeOut OBJECT-TYPE + SYNTAX Unsigned32 (1..60) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the time-out value, in seconds, for + a traceroute request." + DEFVAL { 3 } + ::= { traceRouteCtlEntry 7 } + + traceRouteCtlProbesPerHop OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + UNITS "probes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the number of times to reissue a traceroute + request with the same time-to-live (TTL) value." + DEFVAL { 3 } + ::= { traceRouteCtlEntry 8 } + + traceRouteCtlPort OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + UNITS "UDP Port" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the (initial) UDP port to send the traceroute + request to. A port needs to be specified that is not in + use at the destination (target) host. The default + value for this object is the IANA assigned port, + 33434, for the traceroute function." + DEFVAL { 33434 } + ::= { traceRouteCtlEntry 9 } + + traceRouteCtlMaxTtl OBJECT-TYPE + SYNTAX Unsigned32 (1..255) + UNITS "time-to-live value" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the maximum time-to-live value." + DEFVAL { 30 } + ::= { traceRouteCtlEntry 10 } + + traceRouteCtlDSField OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the value to store in the Type of Service + (TOS) octet in the IPv4 header or in the Traffic + Class octet in the IPv6 header, respectively, of the + IP packet used to encapsulate the traceroute probe. + + The octet to be set in the IP header contains the + Differentiated Services (DS) Field in the six most + significant bits. + + This option can be used to determine what effect an + explicit DS Field setting has on a traceroute response. + Not all values are legal or meaningful. A value of 0 + means that the function represented by this option is + not supported. DS Field usage is often not supported + by IP implementations, and not all values are supported. + Refer to RFC 2474 and RFC 3260 for guidance on usage of + this field." + REFERENCE + "Refer to RFC 1812 for the definition of the IPv4 TOS + octet and to RFC 2460 for the definition of the IPv6 + Traffic Class octet. Refer to RFC 2474 and RFC 3260 + for the definition of the Differentiated Services Field." + DEFVAL { 0 } + ::= { traceRouteCtlEntry 11 } + + traceRouteCtlSourceAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the type of the source address, + traceRouteCtlSourceAddress, to be used at a remote host + when a traceroute operation is performed." + DEFVAL { unknown } + ::= { traceRouteCtlEntry 12 } + + traceRouteCtlSourceAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Use the specified IP address (which must be given as an + IP number, not a hostname) as the source address in + outgoing probe packets. On hosts with more than one IP + address, this option can be used to select the address + to be used. If the IP address is not one of this + machine's interface addresses, an error is returned, and + nothing is sent. A zero-length octet string value for + this object disables source address specification. + The address type (InetAddressType) that relates to + this object is specified by the corresponding value + of traceRouteCtlSourceAddressType." + DEFVAL { ''H } + ::= { traceRouteCtlEntry 13 } + + traceRouteCtlIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting this object to an interface's ifIndex prior + to starting a remote traceroute operation directs + the traceroute probes to be transmitted over the + specified interface. A value of zero for this object + implies that this option is not enabled." + DEFVAL { 0 } + ::= { traceRouteCtlEntry 14 } + + traceRouteCtlMiscOptions OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enables an application to specify implementation-dependent + options." + DEFVAL { ''H } + ::= { traceRouteCtlEntry 15 } + + traceRouteCtlMaxFailures OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + UNITS "timeouts" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object indicates the maximum number + of consecutive timeouts allowed before a remote traceroute + request is terminated. A value of either 255 (maximum + hop count/possible TTL value) or 0 indicates that the + function of terminating a remote traceroute request when a + specific number of consecutive timeouts are detected is + disabled." + DEFVAL { 5 } + ::= { traceRouteCtlEntry 16 } + + traceRouteCtlDontFragment OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object enables setting of the don't fragment flag (DF) + in the IP header for a probe. Use of this object enables + a manual PATH MTU test is performed." + DEFVAL { false } + ::= { traceRouteCtlEntry 17 } + + traceRouteCtlInitialTtl OBJECT-TYPE + SYNTAX Unsigned32 (1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object specifies the initial TTL value to + use. This enables bypassing the initial (often well known) + portion of a path." + DEFVAL { 1 } + ::= { traceRouteCtlEntry 18 } + + traceRouteCtlFrequency OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of seconds to wait before repeating a + traceroute test, as defined by the value of the + various objects in the corresponding row. + + After a single test is completed the number of seconds + as defined by the value of traceRouteCtlFrequency MUST + elapse before the next traceroute test is started. + + A value of 0 for this object implies that the test + as defined by the corresponding entry will not be + + repeated." + DEFVAL { 0 } + ::= { traceRouteCtlEntry 19 } + + traceRouteCtlStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row. + Conceptual rows having the value 'permanent' need not + allow write-access to any columnar objects in the row." + DEFVAL { nonVolatile } + ::= { traceRouteCtlEntry 20 } + + traceRouteCtlAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + + enabled(1), -- operation should be started + disabled(2) -- operation should be stopped + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Reflects the desired state that an traceRouteCtlEntry + should be in: + + enabled(1) - Attempt to activate the test as defined by + this traceRouteCtlEntry. + disabled(2) - Deactivate the test as defined by this + traceRouteCtlEntry. + + Refer to the corresponding traceRouteResultsOperStatus to + determine the operational state of the test defined by + this entry." + DEFVAL { disabled } + ::= { traceRouteCtlEntry 21 } + + traceRouteCtlDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The purpose of this object is to provide a + descriptive name of the remote traceroute + test." + DEFVAL { ''H } + ::= { traceRouteCtlEntry 22 } + + traceRouteCtlMaxRows OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "rows" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of corresponding entries allowed + in the traceRouteProbeHistoryTable. An implementation + of this MIB will remove the oldest corresponding entry + in the traceRouteProbeHistoryTable to allow the + addition of an new entry once the number of + corresponding rows in the traceRouteProbeHistoryTable + reaches this value. + + Old entries are not removed when a new test is + started. Entries are added to the + traceRouteProbeHistoryTable until traceRouteCtlMaxRows + is reached before entries begin to be removed. + A value of 0 for this object disables creation of + traceRouteProbeHistoryTable entries." + DEFVAL { 50 } + ::= { traceRouteCtlEntry 23 } + + traceRouteCtlTrapGeneration OBJECT-TYPE + SYNTAX BITS { + pathChange(0), + testFailure(1), + testCompletion(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object determines when and whether to + generate a notification for this entry: + + pathChange(0) - Generate a traceRoutePathChange + notification when the current path varies from a + previously determined path. + testFailure(1) - Generate a traceRouteTestFailed + notification when the full path to a target + can't be determined. + testCompletion(2) - Generate a traceRouteTestCompleted + notification when the path to a target has been + determined. + + The value of this object defaults to an empty set, + indicating that none of the above options has been + selected." + DEFVAL { { } } + ::= { traceRouteCtlEntry 24 } + + traceRouteCtlCreateHopsEntries OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The current path for a traceroute test is kept in the + traceRouteHopsTable on a per-hop basis when the value of + this object is true(1)." + DEFVAL { false } + ::= { traceRouteCtlEntry 25 } + + traceRouteCtlType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object is used either to report or to + select the implementation method to be used for + performing a traceroute operation. The value of this + object may be selected from + traceRouteImplementationTypeDomains. + + Additional implementation types should be allocated as + required by implementers of the DISMAN-TRACEROUTE-MIB + under their enterprise specific registration point, + not beneath traceRouteImplementationTypeDomains." + DEFVAL { traceRouteUsingUdpProbes } + ::= { traceRouteCtlEntry 26 } + + traceRouteCtlRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object allows entries to be created and deleted + in the traceRouteCtlTable. Deletion of an entry in + this table results in a deletion of all corresponding (same + traceRouteCtlOwnerIndex and traceRouteCtlTestName + index values) traceRouteResultsTable, + traceRouteProbeHistoryTable, and traceRouteHopsTable + entries. + + A value MUST be specified for traceRouteCtlTargetAddress + prior to acceptance of a transition to active(1) state. + + When a value for pingCtlTargetAddress is set, + the value of object pingCtlRowStatus changes + from notReady(3) to notInService(2). + + Activation of a remote traceroute operation is + controlled via traceRouteCtlAdminStatus, and not + by transitioning of this object's value to active(1). + + Transitions in and out of active(1) state are not + allowed while an entry's traceRouteResultsOperStatus + is active(1), with the exception that deletion of + an entry in this table by setting its RowStatus + object to destroy(6) will stop an active + traceroute operation. + + The operational state of an traceroute operation + can be determined by examination of the corresponding + traceRouteResultsOperStatus object." + REFERENCE + "See definition of RowStatus in RFC 2579, 'Textual + Conventions for SMIv2.'" + ::= { traceRouteCtlEntry 27 } + + -- Traceroute Results Table + + traceRouteResultsTable OBJECT-TYPE + SYNTAX SEQUENCE OF TraceRouteResultsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines the Remote Operations Traceroute Results Table for + keeping track of the status of a traceRouteCtlEntry. + + An entry is added to the traceRouteResultsTable when an + traceRouteCtlEntry is started by successful transition + of its traceRouteCtlAdminStatus object to enabled(1). + + If the object traceRouteCtlAdminStatus already has the value + enabled(1), and if the corresponding + traceRouteResultsOperStatus object has the value + completed(3), then successfully writing enabled(1) to the + object traceRouteCtlAdminStatus re-initializes the already + existing entry in the traceRouteResultsTable. The values of + objects in the re-initialized entry are the same as + the values of objects in a new entry would be. + + An entry is removed from the traceRouteResultsTable when + + its corresponding traceRouteCtlEntry is deleted." + ::= { traceRouteObjects 3 } + + traceRouteResultsEntry OBJECT-TYPE + SYNTAX TraceRouteResultsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines an entry in the traceRouteResultsTable. The + traceRouteResultsTable has the same indexing as the + traceRouteCtlTable so that a traceRouteResultsEntry + corresponds to the traceRouteCtlEntry that caused it to + be created." + INDEX { + traceRouteCtlOwnerIndex, + traceRouteCtlTestName + } + ::= { traceRouteResultsTable 1 } + + TraceRouteResultsEntry ::= + SEQUENCE { + traceRouteResultsOperStatus INTEGER, + traceRouteResultsCurHopCount Gauge32, + traceRouteResultsCurProbeCount Gauge32, + traceRouteResultsIpTgtAddrType InetAddressType, + traceRouteResultsIpTgtAddr InetAddress, + traceRouteResultsTestAttempts Gauge32, + traceRouteResultsTestSuccesses Gauge32, + traceRouteResultsLastGoodPath DateAndTime + } + + traceRouteResultsOperStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), -- test is in progress + disabled(2), -- test has stopped + completed(3) -- test is completed + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reflects the operational state of an traceRouteCtlEntry: + + enabled(1) - Test is active. + disabled(2) - Test has stopped. + completed(3) - Test is completed." + ::= { traceRouteResultsEntry 1 } + + traceRouteResultsCurHopCount OBJECT-TYPE + SYNTAX Gauge32 + UNITS "hops" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reflects the current TTL value (from 1 to + 255) for a remote traceroute operation. + Maximum TTL value is determined by + traceRouteCtlMaxTtl." + ::= { traceRouteResultsEntry 2 } + + traceRouteResultsCurProbeCount OBJECT-TYPE + SYNTAX Gauge32 + UNITS "probes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reflects the current probe count (1..10) for + a remote traceroute operation. The maximum + probe count is determined by + traceRouteCtlProbesPerHop." + ::= { traceRouteResultsEntry 3 } + + traceRouteResultsIpTgtAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the type of address stored + in the corresponding traceRouteResultsIpTgtAddr + object." + ::= { traceRouteResultsEntry 4 } + + traceRouteResultsIpTgtAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object reports the IP address associated + with a traceRouteCtlTargetAddress value when the + destination address is specified as a DNS name. + The value of this object should be a zero-length + octet string when a DNS name is not specified or + when a specified DNS name fails to resolve." + ::= { traceRouteResultsEntry 5 } + + traceRouteResultsTestAttempts OBJECT-TYPE + SYNTAX Gauge32 + UNITS "tests" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of attempts to determine a path + to a target. The value of this object MUST be started + at 0." + ::= { traceRouteResultsEntry 6 } + + traceRouteResultsTestSuccesses OBJECT-TYPE + SYNTAX Gauge32 + UNITS "tests" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of attempts to determine a path + to a target that have succeeded. The value of this + object MUST be reported as 0 when no attempts have + succeeded." + ::= { traceRouteResultsEntry 7 } + + traceRouteResultsLastGoodPath OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the last complete path + was determined. A path is complete if responses + were received or timeout occurred for each hop on + the path; i.e., for each TTL value from the value + of the corresponding traceRouteCtlInitialTtl object + up to the end of the path or (if no reply from the + target IP address was received) up to the value of + the corresponding traceRouteCtlMaxTtl object." + ::= { traceRouteResultsEntry 8 } + + -- Trace Route Probe History Table + + traceRouteProbeHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF TraceRouteProbeHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines the Remote Operations Traceroute Results Table + for storing the results of a traceroute operation. + + An implementation of this MIB will remove the oldest + + entry in the traceRouteProbeHistoryTable of the + corresponding entry in the traceRouteCtlTable to allow + the addition of a new entry once the number of rows in + the traceRouteProbeHistoryTable reaches the value specified + by traceRouteCtlMaxRows for the corresponding entry in the + traceRouteCtlTable." + ::= { traceRouteObjects 4 } + + traceRouteProbeHistoryEntry OBJECT-TYPE + SYNTAX TraceRouteProbeHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines a table for storing the results of a traceroute + operation. Entries in this table are limited by + the value of the corresponding traceRouteCtlMaxRows + object. + + The first two index elements identify the + traceRouteCtlEntry that a traceRouteProbeHistoryEntry + belongs to. The third index element selects a single + traceroute operation result. The fourth and fifth indexes + select the hop and the probe for a particular + traceroute operation." + INDEX { + traceRouteCtlOwnerIndex, + traceRouteCtlTestName, + traceRouteProbeHistoryIndex, + traceRouteProbeHistoryHopIndex, + traceRouteProbeHistoryProbeIndex + + } + ::= { traceRouteProbeHistoryTable 1 } + + TraceRouteProbeHistoryEntry ::= + SEQUENCE { + traceRouteProbeHistoryIndex Unsigned32, + traceRouteProbeHistoryHopIndex Unsigned32, + traceRouteProbeHistoryProbeIndex Unsigned32, + traceRouteProbeHistoryHAddrType InetAddressType, + traceRouteProbeHistoryHAddr InetAddress, + traceRouteProbeHistoryResponse Unsigned32, + traceRouteProbeHistoryStatus OperationResponseStatus, + traceRouteProbeHistoryLastRC Integer32, + traceRouteProbeHistoryTime DateAndTime + } + + traceRouteProbeHistoryIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table is created when the result of + a traceroute probe is determined. The initial 2 instance + identifier index values identify the traceRouteCtlEntry + that a probe result (traceRouteProbeHistoryEntry) belongs + to. An entry is removed from this table when + its corresponding traceRouteCtlEntry is deleted. + + An implementation MUST start assigning + traceRouteProbeHistoryIndex values at 1 and wrap after + exceeding the maximum possible value, as defined by the + limit of this object ('ffffffff'h)." + ::= { traceRouteProbeHistoryEntry 1 } + + traceRouteProbeHistoryHopIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..255) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates which hop in a traceroute path the probe's + results are for. The value of this object is initially + determined by the value of traceRouteCtlInitialTtl." + ::= { traceRouteProbeHistoryEntry 2 } + + traceRouteProbeHistoryProbeIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the index of a probe for a particular + hop in a traceroute path. The number of probes per + hop is determined by the value of the corresponding + traceRouteCtlProbesPerHop object." + ::= { traceRouteProbeHistoryEntry 3 } + + traceRouteProbeHistoryHAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This objects indicates the type of address stored + in the corresponding traceRouteProbeHistoryHAddr + object." + ::= { traceRouteProbeHistoryEntry 4 } + + traceRouteProbeHistoryHAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address of a hop in a traceroute path. This object + is not allowed to be a DNS name. The value of the + corresponding object, traceRouteProbeHistoryHAddrType, + indicates this object's IP address type." + ::= { traceRouteProbeHistoryEntry 5 } + + traceRouteProbeHistoryResponse OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of time measured in milliseconds from when + a probe was sent to when its response was received or + when it timed out. The value of this object is reported + as 0 when it is not possible to transmit a probe." + ::= { traceRouteProbeHistoryEntry 6 } + + traceRouteProbeHistoryStatus OBJECT-TYPE + SYNTAX OperationResponseStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The result of a traceroute operation made by a remote + host for a particular probe." + ::= { traceRouteProbeHistoryEntry 7 } + + traceRouteProbeHistoryLastRC OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The last implementation-method-specific reply code received. + + Traceroute is usually implemented by transmitting a series of + probe packets with increasing time-to-live values. A probe + packet is a UDP datagram encapsulated into an IP packet. + Each hop in a path to the target (destination) host rejects + the probe packets (probe's TTL too small, ICMP reply) until + either the maximum TTL is exceeded or the target host is + received." + ::= { traceRouteProbeHistoryEntry 8 } + + traceRouteProbeHistoryTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Timestamp for when this probe's results were determined." + ::= { traceRouteProbeHistoryEntry 9 } + + -- Traceroute Hop Results Table + + traceRouteHopsTable OBJECT-TYPE + SYNTAX SEQUENCE OF TraceRouteHopsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines the Remote Operations Traceroute Hop Table for + keeping track of the results of traceroute tests on a + per-hop basis." + ::= { traceRouteObjects 5 } + + traceRouteHopsEntry OBJECT-TYPE + SYNTAX TraceRouteHopsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines an entry in the traceRouteHopsTable. + The first two index elements identify the + traceRouteCtlEntry that a traceRouteHopsEntry + belongs to. The third index element, + traceRouteHopsHopIndex, selects a + hop in a traceroute path." + INDEX { + traceRouteCtlOwnerIndex, + traceRouteCtlTestName, + traceRouteHopsHopIndex + } + ::= { traceRouteHopsTable 1 } + + TraceRouteHopsEntry ::= + SEQUENCE { + traceRouteHopsHopIndex Unsigned32, + traceRouteHopsIpTgtAddressType InetAddressType, + traceRouteHopsIpTgtAddress InetAddress, + traceRouteHopsMinRtt Unsigned32, + traceRouteHopsMaxRtt Unsigned32, + traceRouteHopsAverageRtt Unsigned32, + traceRouteHopsRttSumOfSquares Unsigned32, + traceRouteHopsSentProbes Unsigned32, + traceRouteHopsProbeResponses Unsigned32, + traceRouteHopsLastGoodProbe DateAndTime + } + + traceRouteHopsHopIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the hop index for a traceroute hop. Values + for this object with respect to the same + traceRouteCtlOwnerIndex and traceRouteCtlTestName + MUST start at 1 and be given increasing values for + subsequent hops. The value of traceRouteHopsHopIndex is not + necessarily the number of the hop on the traced path. + + The traceRouteHopsTable keeps the current traceroute + path per traceRouteCtlEntry if enabled by + setting the corresponding traceRouteCtlCreateHopsEntries + to true(1). + + All hops (traceRouteHopsTable entries) in a traceroute + path MUST be updated at the same time when a traceroute + operation is completed. Care needs to be applied when a path + either changes or can't be determined. The initial portion + of the path, up to the first hop change, MUST retain the + same traceRouteHopsHopIndex values. The remaining portion + of the path SHOULD be assigned new traceRouteHopsHopIndex + values." + ::= { traceRouteHopsEntry 1 } + + traceRouteHopsIpTgtAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the type of address stored + in the corresponding traceRouteHopsIpTgtAddress + object." + ::= { traceRouteHopsEntry 2 } + + traceRouteHopsIpTgtAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object reports the IP address associated with + + the hop. A value for this object should be reported + as a numeric IP address, not as a DNS name. + + The address type (InetAddressType) that relates to + this object is specified by the corresponding value + of pingCtlSourceAddressType." + ::= { traceRouteHopsEntry 3 } + + traceRouteHopsMinRtt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum traceroute round-trip-time (RTT) received for + this hop. A value of 0 for this object implies that no + RTT has been received." + ::= { traceRouteHopsEntry 4 } + + traceRouteHopsMaxRtt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum traceroute round-trip-time (RTT) received for + this hop. A value of 0 for this object implies that no + RTT has been received." + ::= { traceRouteHopsEntry 5 } + + traceRouteHopsAverageRtt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current average traceroute round-trip-time (RTT) for + this hop." + ::= { traceRouteHopsEntry 6 } + + traceRouteHopsRttSumOfSquares OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the sum of the squares of all + round-trip-times received for this hop. Its purpose is + to enable standard deviation calculation." + ::= { traceRouteHopsEntry 7 } + + traceRouteHopsSentProbes OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object reflects the number of probes sent + for this hop during this traceroute test. The value of this + object should start at 0." + ::= { traceRouteHopsEntry 8 } + + traceRouteHopsProbeResponses OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of responses received for this hop during this + traceroute test. This value of this object should start + at 0." + ::= { traceRouteHopsEntry 9 } + + traceRouteHopsLastGoodProbe OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Date and time at which the last response was received for a + probe for this hop during this traceroute test." + ::= { traceRouteHopsEntry 10 } + + -- Notification Definition section + + traceRoutePathChange NOTIFICATION-TYPE + OBJECTS { + traceRouteCtlTargetAddressType, + traceRouteCtlTargetAddress, + traceRouteResultsIpTgtAddrType, + traceRouteResultsIpTgtAddr + } + STATUS current + DESCRIPTION + "The path to a target has changed." + ::= { traceRouteNotifications 1 } + + traceRouteTestFailed NOTIFICATION-TYPE + OBJECTS { + traceRouteCtlTargetAddressType, + traceRouteCtlTargetAddress, + traceRouteResultsIpTgtAddrType, + traceRouteResultsIpTgtAddr + + } + STATUS current + DESCRIPTION + "Could not determine the path to a target." + ::= { traceRouteNotifications 2 } + + traceRouteTestCompleted NOTIFICATION-TYPE + OBJECTS { + traceRouteCtlTargetAddressType, + traceRouteCtlTargetAddress, + traceRouteResultsIpTgtAddrType, + traceRouteResultsIpTgtAddr + } + STATUS current + DESCRIPTION + "The path to a target has just been determined." + ::= { traceRouteNotifications 3 } + + -- Conformance information + -- Compliance statements + + traceRouteCompliances OBJECT IDENTIFIER + ::= { traceRouteConformance 1 } + traceRouteGroups OBJECT IDENTIFIER + ::= { traceRouteConformance 2 } + + -- Compliance statements + + traceRouteFullCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities that + fully implement the DISMAN-TRACEROUTE-MIB." + MODULE -- this module + MANDATORY-GROUPS { + traceRouteMinimumGroup, + traceRouteCtlRowStatusGroup, + traceRouteHistoryGroup + } + + GROUP traceRouteHopsTableGroup + DESCRIPTION + "This group lists the objects that make up a + traceRouteHopsEntry. Support of the traceRouteHopsTable + is optional." + + GROUP traceRouteNotificationsGroup + DESCRIPTION + "This group defines a collection of optional + notifications." + + OBJECT traceRouteMaxConcurrentRequests + MIN-ACCESS read-only + DESCRIPTION + "The agent is not required to support SET + operations to this object." + + OBJECT traceRouteCtlByPassRouteTable + MIN-ACCESS read-only + DESCRIPTION + "Write access to this object is not required by + implementations that are not capable of its + implementation. The function represented by this + object is implementable if the setsockopt + SOL_SOCKET SO_DONTROUTE option is supported." + + OBJECT traceRouteCtlDSField + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If write access is + not supported, return a 0 as the value of this object. + A value of 0 implies that the function represented by + this option is not supported." + + OBJECT traceRouteCtlSourceAddressType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + MIN-ACCESS read-only + DESCRIPTION + "Write access to this object is not required by + implementations that are not capable of binding the + send socket with a source address. An implementation + is only required to support IPv4 and IPv6 addresses." + + OBJECT traceRouteCtlSourceAddress + SYNTAX InetAddress (SIZE(0|4|16)) + MIN-ACCESS read-only + DESCRIPTION + "Write access to this object is not required by + implementations that are not capable of binding the + send socket with a source address. An implementation + is only required to support IPv4 and IPv6 addresses." + + OBJECT traceRouteCtlIfIndex + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If write access is + + not supported, return a 0 as the value of this object. + A value of 0 implies that the function represented by + this option is not supported." + + OBJECT traceRouteCtlMiscOptions + MIN-ACCESS read-only + DESCRIPTION + "Support of this object is optional. If not + supporting, do not allow write access and return a + zero-length octet string as the value of the object." + + OBJECT traceRouteCtlStorageType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. It is also allowed + that implementations support only the volatile(2) + StorageType enumeration." + + OBJECT traceRouteCtlType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. In addition, the only + value that is RECOMMENDED to be supported by an + implementation is traceRouteUsingUdpProbes." + + OBJECT traceRouteResultsIpTgtAddrType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteResultsIpTgtAddr + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteResultsLastGoodPath + DESCRIPTION + "If the traceRouteHopsTableGroup is implemented, then + this object is mandatory for implementations that have + access to a system clock and that are capable of setting + the values for DateAndTime objects. It is RECOMMENDED + that when this object is not supported its values + be reported as '0000000000000000'H." + + OBJECT traceRouteProbeHistoryHAddrType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteProbeHistoryHAddr + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteProbeHistoryTime + DESCRIPTION + "This object is mandatory for implementations that have + access to a system clock and that are capable of setting + the values for DateAndTime objects. It is RECOMMENDED + that when this object is not supported its values + be reported as '0000000000000000'H." + + OBJECT traceRouteHopsIpTgtAddressType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteHopsIpTgtAddress + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteHopsLastGoodProbe + DESCRIPTION + "This object is mandatory for implementations that have + access to a system clock and that are capable of setting + the values for DateAndTime objects. It is RECOMMENDED + that when this object is not supported its values + be reported as '0000000000000000'H." + ::= { traceRouteCompliances 2 } + + traceRouteMinimumCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The minimum compliance statement for SNMP entities + which implement the minimal subset of the + DISMAN-TRACEROUTE-MIB. Implementors might choose this + subset for small devices with limited resources." + MODULE -- this module + + MANDATORY-GROUPS { traceRouteMinimumGroup } + + GROUP traceRouteCtlRowStatusGroup + DESCRIPTION + "A compliant implementation does not have to implement + the traceRouteCtlRowStatusGroup." + + GROUP traceRouteHistoryGroup + DESCRIPTION + "A compliant implementation does not have to implement + the traceRouteHistoryGroup." + + GROUP traceRouteHopsTableGroup + DESCRIPTION + "This group lists the objects that make up a + traceRouteHopsEntry. Support of the traceRouteHopsTable + is optional." + + GROUP traceRouteNotificationsGroup + DESCRIPTION + "This group defines a collection of optional + notifications." + + OBJECT traceRouteMaxConcurrentRequests + MIN-ACCESS read-only + DESCRIPTION + "The agent is not required to support SET + operations to this object." + + OBJECT traceRouteCtlByPassRouteTable + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If write access is + not supported, return a false(2) as the value of this + object. A value of false(2) means that the function + represented by this option is not supported." + + OBJECT traceRouteCtlDSField + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If write access is + not supported, return a 0 as the value of this object. + A value of 0 implies that the function represented by + this option is not supported." + + OBJECT traceRouteCtlSourceAddressType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + MIN-ACCESS read-only + DESCRIPTION + "Write access to this object is not required by + implementations that are not capable of binding the + send socket with a source address. An implementation + is only required to support IPv4 and IPv6 addresses." + + OBJECT traceRouteCtlSourceAddress + SYNTAX InetAddress (SIZE(0|4|16)) + MIN-ACCESS read-only + DESCRIPTION + "Write access to this object is not required by + implementations that are not capable of binding the + send socket with a source address. An implementation + is only required to support IPv4 and IPv6 addresses." + + OBJECT traceRouteCtlIfIndex + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If write access is + not supported, return a 0 as the value of this object. + A value of 0 implies that the function represented by + this option is not supported." + + OBJECT traceRouteCtlMiscOptions + MIN-ACCESS read-only + DESCRIPTION + "Support of this object is optional. If not + supporting, do not allow write access, and return a + zero-length octet string as the value of the object." + + OBJECT traceRouteCtlDontFragment + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If write access is + not supported, return a false(2) as the value of this + object. A value of false(2) means that the function + represented by this option is not supported." + + OBJECT traceRouteCtlInitialTtl + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If write access is + not supported, return a 1 as the value of this object." + + OBJECT traceRouteCtlFrequency + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If write access is + not supported, return a 0 as the value of this object. + A value of 0 implies that the function represented by + this option is not supported." + + OBJECT traceRouteCtlStorageType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. It is also allowed + that implementations support only the volatile(2) + StorageType enumeration." + + OBJECT traceRouteCtlDescr + MIN-ACCESS read-only + DESCRIPTION + "The agent is not required to support set + operations to this object." + + OBJECT traceRouteCtlMaxRows + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If the + traceRouteHistoryGroup is not implemented, then write + access to this object MUST be disabled, and the object + MUST return a value of 0 when retrieved." + + OBJECT traceRouteCtlTrapGeneration + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If the + traceRouteNotificationsGroup is not implemented, then + write access to this object MUST be disabled, and the + object MUST return a value with no bit set when + retrieved. No bit set indicates that no notification + is generated." + + OBJECT traceRouteCtlCreateHopsEntries + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. If the + traceRouteHopsTableGroup is not implemented, then + write access to this object MUST be disabled, and the + object MUST return a value of false(2) when retrieved." + + OBJECT traceRouteCtlType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. In addition, the only + + value that is RECOMMENDED to be supported by an + implementation is traceRouteUsingUdpProbes." + + OBJECT traceRouteResultsIpTgtAddrType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteResultsIpTgtAddr + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteResultsLastGoodPath + DESCRIPTION + "This object is mandatory for implementations that have + access to a system clock and that are capable of setting + the values for DateAndTime objects. It is RECOMMENDED + that when this object is not supported its values + be reported as '0000000000000000'H." + + OBJECT traceRouteProbeHistoryHAddrType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteProbeHistoryHAddr + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteProbeHistoryTime + DESCRIPTION + "If the traceRouteHistoryGroup is implemented, then + this object is mandatory for implementations that have + access to a system clock and that are capable of setting + the values for DateAndTime objects. It is RECOMMENDED + that when this object is not supported its values + be reported as '0000000000000000'H." + + OBJECT traceRouteHopsIpTgtAddressType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + + globally unique IPv6 address values for this object." + + OBJECT traceRouteHopsIpTgtAddress + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteHopsLastGoodProbe + DESCRIPTION + "If the traceRouteHopsTableGroup is implemented, then + this object is mandatory for implementations that have + access to a system clock and that are capable of setting + the values for DateAndTime objects. It is RECOMMENDED + that when this object is not supported its values + be reported as '0000000000000000'H." + ::= { traceRouteCompliances 3 } + + traceRouteCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the DISMAN-TRACEROUTE-MIB. + This compliance statement has been deprecated because + the traceRouteGroup and the traceRouteTimeStampGroup + have been split and deprecated. The + traceRouteFullCompliance is semantically identical to the + deprecated traceRouteCompliance statement." + MODULE -- this module + MANDATORY-GROUPS { + traceRouteGroup + } + GROUP traceRouteTimeStampGroup + DESCRIPTION + "This group is mandatory for implementations that have + access to a system clock and that are capable of setting + the values for DateAndTime objects." + + GROUP traceRouteNotificationsGroup + DESCRIPTION + "This group defines a collection of optional + notifications." + + GROUP traceRouteHopsTableGroup + DESCRIPTION + "This group lists the objects that make up a + traceRouteHopsEntry. Support of the traceRouteHopsTable + is optional." + + OBJECT traceRouteMaxConcurrentRequests + MIN-ACCESS read-only + DESCRIPTION + "The agent is not required to support SET + operations to this object." + + OBJECT traceRouteCtlByPassRouteTable + MIN-ACCESS read-only + DESCRIPTION + "This object is not required by implementations that + are not capable of its implementation. The function + represented by this object is implementable if the + setsockopt SOL_SOCKET SO_DONTROUTE option is + supported." + + OBJECT traceRouteCtlSourceAddressType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + MIN-ACCESS read-only + DESCRIPTION + "This object is not required by implementations that + are not capable of binding the send socket with a + source address. An implementation is only required to + support IPv4 and IPv6 addresses." + + OBJECT traceRouteCtlSourceAddress + SYNTAX InetAddress (SIZE(0|4|16)) + MIN-ACCESS read-only + DESCRIPTION + "This object is not required by implementations that + are not capable of binding the send socket with a + source address. An implementation is only required to + support IPv4 and globally unique IPv6 addresses." + + OBJECT traceRouteCtlIfIndex + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. When write access is + not supported, return a 0 as the value of this object. + A value of 0 implies that the function represented by + this option is not supported." + + OBJECT traceRouteCtlMiscOptions + MIN-ACCESS read-only + DESCRIPTION + "Support of this object is optional. When not + supporting, do not allow write access, and return a + zero-length octet string as the value of the object." + + OBJECT traceRouteCtlStorageType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. It is also allowed + that implementations support only the volatile + StorageType enumeration." + + OBJECT traceRouteCtlDSField + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. When write access is + not supported, return a 0 as the value of this object. + A value of 0 implies that the function represented by + this option is not supported." + + OBJECT traceRouteCtlType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. In addition, the only + value that is RECOMMENDED to be supported by an + implementation is traceRouteUsingUdpProbes." + + OBJECT traceRouteResultsIpTgtAddrType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteResultsIpTgtAddr + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteProbeHistoryHAddrType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteProbeHistoryHAddr + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteHopsIpTgtAddressType + SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + + OBJECT traceRouteHopsIpTgtAddress + SYNTAX InetAddress (SIZE(0|4|16)) + DESCRIPTION + "An implementation should only support IPv4 and + globally unique IPv6 address values for this object." + ::= { traceRouteCompliances 1 } + + -- MIB groupings + + traceRouteMinimumGroup OBJECT-GROUP + OBJECTS { + traceRouteMaxConcurrentRequests, + traceRouteCtlTargetAddressType, + traceRouteCtlTargetAddress, + traceRouteCtlByPassRouteTable, + traceRouteCtlDataSize, + traceRouteCtlTimeOut, + traceRouteCtlProbesPerHop, + traceRouteCtlPort, + traceRouteCtlMaxTtl, + traceRouteCtlDSField, + traceRouteCtlSourceAddressType, + traceRouteCtlSourceAddress, + traceRouteCtlIfIndex, + traceRouteCtlMiscOptions, + traceRouteCtlMaxFailures, + traceRouteCtlDontFragment, + traceRouteCtlInitialTtl, + traceRouteCtlFrequency, + traceRouteCtlStorageType, + traceRouteCtlAdminStatus, + traceRouteCtlMaxRows, + traceRouteCtlTrapGeneration, + traceRouteCtlDescr, + traceRouteCtlCreateHopsEntries, + traceRouteCtlType, + traceRouteResultsOperStatus, + traceRouteResultsCurHopCount, + traceRouteResultsCurProbeCount, + traceRouteResultsIpTgtAddrType, + traceRouteResultsIpTgtAddr, + traceRouteResultsTestAttempts, + traceRouteResultsTestSuccesses, + traceRouteResultsLastGoodPath + + } + STATUS current + DESCRIPTION + "The group of objects that constitute the remote traceroute + operation." + ::= { traceRouteGroups 5 } + + traceRouteCtlRowStatusGroup OBJECT-GROUP + OBJECTS { + traceRouteCtlRowStatus + } + STATUS current + DESCRIPTION + "The RowStatus object of the traceRouteCtlTable." + ::= { traceRouteGroups 6 } + + traceRouteHistoryGroup OBJECT-GROUP + OBJECTS { + traceRouteProbeHistoryHAddrType, + traceRouteProbeHistoryHAddr, + traceRouteProbeHistoryResponse, + traceRouteProbeHistoryStatus, + traceRouteProbeHistoryLastRC, + traceRouteProbeHistoryTime + } + STATUS current + DESCRIPTION + "The group of objects that constitute the history + capability." + ::= { traceRouteGroups 7 } + + traceRouteNotificationsGroup NOTIFICATION-GROUP + NOTIFICATIONS { + traceRoutePathChange, + traceRouteTestFailed, + traceRouteTestCompleted + } + STATUS current + DESCRIPTION + "The notifications that are required to be supported by + implementations of this MIB." + ::= { traceRouteGroups 3 } + + traceRouteHopsTableGroup OBJECT-GROUP + OBJECTS { + traceRouteHopsIpTgtAddressType, + traceRouteHopsIpTgtAddress, + traceRouteHopsMinRtt, + traceRouteHopsMaxRtt, + traceRouteHopsAverageRtt, + traceRouteHopsRttSumOfSquares, + traceRouteHopsSentProbes, + traceRouteHopsProbeResponses, + traceRouteHopsLastGoodProbe + } + STATUS current + DESCRIPTION + "The group of objects that constitute the + traceRouteHopsTable." + ::= { traceRouteGroups 4 } + + traceRouteGroup OBJECT-GROUP + OBJECTS { + traceRouteMaxConcurrentRequests, + traceRouteCtlTargetAddressType, + traceRouteCtlTargetAddress, + traceRouteCtlByPassRouteTable, + traceRouteCtlDataSize, + traceRouteCtlTimeOut, + traceRouteCtlProbesPerHop, + traceRouteCtlPort, + traceRouteCtlMaxTtl, + traceRouteCtlDSField, + traceRouteCtlSourceAddressType, + traceRouteCtlSourceAddress, + traceRouteCtlIfIndex, + traceRouteCtlMiscOptions, + traceRouteCtlMaxFailures, + traceRouteCtlDontFragment, + traceRouteCtlInitialTtl, + traceRouteCtlFrequency, + traceRouteCtlStorageType, + traceRouteCtlAdminStatus, + traceRouteCtlMaxRows, + traceRouteCtlTrapGeneration, + traceRouteCtlDescr, + traceRouteCtlCreateHopsEntries, + traceRouteCtlType, + traceRouteCtlRowStatus, + traceRouteResultsOperStatus, + traceRouteResultsCurHopCount, + traceRouteResultsCurProbeCount, + traceRouteResultsIpTgtAddrType, + traceRouteResultsIpTgtAddr, + traceRouteResultsTestAttempts, + traceRouteResultsTestSuccesses, + traceRouteProbeHistoryHAddrType, + traceRouteProbeHistoryHAddr, + traceRouteProbeHistoryResponse, + traceRouteProbeHistoryStatus, + traceRouteProbeHistoryLastRC + } + STATUS deprecated + DESCRIPTION + "The group of objects that constitute the remote traceroute + operation." + ::= { traceRouteGroups 1 } + + traceRouteTimeStampGroup OBJECT-GROUP + OBJECTS { + traceRouteResultsLastGoodPath, + traceRouteProbeHistoryTime + } + STATUS deprecated + DESCRIPTION + "The group of DateAndTime objects." + ::= { traceRouteGroups 2 } + +END |