diff options
Diffstat (limited to 'mibs/HOST-RESOURCES-MIB.txt')
| -rw-r--r-- | mibs/HOST-RESOURCES-MIB.txt | 1540 |
1 files changed, 1540 insertions, 0 deletions
diff --git a/mibs/HOST-RESOURCES-MIB.txt b/mibs/HOST-RESOURCES-MIB.txt new file mode 100644 index 0000000..373b9b3 --- /dev/null +++ b/mibs/HOST-RESOURCES-MIB.txt @@ -0,0 +1,1540 @@ +HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN + +IMPORTS +MODULE-IDENTITY, OBJECT-TYPE, mib-2, +Integer32, Counter32, Gauge32, TimeTicks FROM SNMPv2-SMI + +TEXTUAL-CONVENTION, DisplayString, +TruthValue, DateAndTime, AutonomousType FROM SNMPv2-TC + +MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + +InterfaceIndexOrZero FROM IF-MIB; + +hostResourcesMibModule MODULE-IDENTITY + LAST-UPDATED "200003060000Z" -- 6 March 2000 + ORGANIZATION "IETF Host Resources MIB Working Group" + CONTACT-INFO + "Steve Waldbusser + Postal: Lucent Technologies, Inc. + 1213 Innsbruck Dr. + Sunnyvale, CA 94089 + USA + Phone: 650-318-1251 + Fax: 650-318-1633 + Email: waldbusser@lucent.com + + In addition, the Host Resources MIB mailing list is + dedicated to discussion of this MIB. To join the + mailing list, send a request message to + hostmib-request@andrew.cmu.edu. The mailing list + address is hostmib@andrew.cmu.edu." + DESCRIPTION + "This MIB is for use in managing host systems. The term + `host' is construed to mean any computer that communicates + with other similar computers attached to the internet and + that is directly used by one or more human beings. Although + this MIB does not necessarily apply to devices whose primary + function is communications services (e.g., terminal servers, + routers, bridges, monitoring equipment), such relevance is + not explicitly precluded. This MIB instruments attributes + common to all internet hosts including, for example, both + personal computers and systems that run variants of Unix." + + REVISION "200003060000Z" -- 6 March 2000 + DESCRIPTION + "Clarifications and bug fixes based on implementation + experience. This revision was also reformatted in the SMIv2 + format. The revisions made were: + + New RFC document standards: + Added Copyright notice, updated introduction to SNMP + Framework, updated references section, added reference to + RFC 2119, and added a meaningful Security Considerations + section. + + New IANA considerations section for registration of new types + + Conversion to new SMIv2 syntax for the following types and + macros: + Counter32, Integer32, Gauge32, MODULE-IDENTITY, + OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY, + MODULE-COMPLIANCE, OBJECT-GROUP + + Used new Textual Conventions: + TruthValue, DateAndTime, AutonomousType, + InterfaceIndexOrZero + + Fixed typo in hrPrinterStatus. + + Added missing error bits to hrPrinterDetectedErrorState and + clarified confusion resulting from suggested mappings to + hrPrinterStatus. + + Clarified that size of objects of type + InternationalDisplayString is number of octets, not number + of encoded symbols. + + Clarified the use of the following objects based on + implementation experience: + hrSystemInitialLoadDevice, hrSystemInitialLoadParameters, + hrMemorySize, hrStorageSize, hrStorageAllocationFailures, + hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex, + hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU, + and hrSWInstalledDate. + + Clarified implementation technique for hrSWInstalledTable. + + Used new AUGMENTS clause for hrSWRunPerfTable. + + Added Internationalization Considerations section. + +This revision published as RFC2790." + + REVISION "9910202200Z" -- 20 October, 1999 + DESCRIPTION + "The original version of this MIB, published as + RFC1514." + ::= { hrMIBAdminInfo 1 } + +host OBJECT IDENTIFIER ::= { mib-2 25 } + +hrSystem OBJECT IDENTIFIER ::= { host 1 } +hrStorage OBJECT IDENTIFIER ::= { host 2 } +hrDevice OBJECT IDENTIFIER ::= { host 3 } +hrSWRun OBJECT IDENTIFIER ::= { host 4 } +hrSWRunPerf OBJECT IDENTIFIER ::= { host 5 } +hrSWInstalled OBJECT IDENTIFIER ::= { host 6 } +hrMIBAdminInfo OBJECT IDENTIFIER ::= { host 7 } + +-- textual conventions + +KBytes ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Storage size, expressed in units of 1024 bytes." + SYNTAX Integer32 (0..2147483647) + +ProductID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This textual convention is intended to identify the + + manufacturer, model, and version of a specific + hardware or software product. It is suggested that + these OBJECT IDENTIFIERs are allocated such that all + products from a particular manufacturer are registered + under a subtree distinct to that manufacturer. In + addition, all versions of a product should be + registered under a subtree distinct to that product. + With this strategy, a management station may uniquely + determine the manufacturer and/or model of a product + whose productID is unknown to the management station. + Objects of this type may be useful for inventory + purposes or for automatically detecting + incompatibilities or version mismatches between + various hardware and software components on a system. + + For example, the product ID for the ACME 4860 66MHz + clock doubled processor might be: + enterprises.acme.acmeProcessors.a4860DX2.MHz66 + + A software product might be registered as: + enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1) + " + SYNTAX OBJECT IDENTIFIER + +-- unknownProduct will be used for any unknown ProductID +-- unknownProduct OBJECT IDENTIFIER ::= { 0 0 } + +InternationalDisplayString ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This data type is used to model textual information + in some character set. A network management station + should use a local algorithm to determine which + character set is in use and how it should be + displayed. Note that this character set may be + encoded with more than one octet per symbol, but will + most often be NVT ASCII. When a size clause is + specified for an object of this type, the size refers + to the length in octets, not the number of symbols." + SYNTAX OCTET STRING + +-- The Host Resources System Group + +hrSystemUptime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of time since this host was last + initialized. Note that this is different from + sysUpTime in the SNMPv2-MIB [RFC1907] because + sysUpTime is the uptime of the network management + portion of the system." + ::= { hrSystem 1 } + +hrSystemDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The host's notion of the local date and time of day." + ::= { hrSystem 2 } + +hrSystemInitialLoadDevice OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The index of the hrDeviceEntry for the device from + which this host is configured to load its initial + operating system configuration (i.e., which operating + system code and/or boot parameters). + + Note that writing to this object just changes the + configuration that will be used the next time the + operating system is loaded and does not actually cause + the reload to occur." + ::= { hrSystem 3 } + +hrSystemInitialLoadParameters OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object contains the parameters (e.g. a pathname + and parameter) supplied to the load device when + requesting the initial operating system configuration + from that device. + + Note that writing to this object just changes the + configuration that will be used the next time the + operating system is loaded and does not actually cause + the reload to occur." + ::= { hrSystem 4 } + +hrSystemNumUsers OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of user sessions for which this host is + storing state information. A session is a collection + of processes requiring a single act of user + authentication and possibly subject to collective job + control." + ::= { hrSystem 5 } + +hrSystemProcesses OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of process contexts currently loaded or + running on this system." + ::= { hrSystem 6 } + +hrSystemMaxProcesses OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of process contexts this system + can support. If there is no fixed maximum, the value + should be zero. On systems that have a fixed maximum, + this object can help diagnose failures that occur when + this maximum is reached." + ::= { hrSystem 7 } + +-- The Host Resources Storage Group + +-- Registration point for storage types, for use with hrStorageType. +-- These are defined in the HOST-RESOURCES-TYPES module. +hrStorageTypes OBJECT IDENTIFIER ::= { hrStorage 1 } + +hrMemorySize OBJECT-TYPE + SYNTAX KBytes + UNITS "KBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of physical read-write main memory, + typically RAM, contained by the host." + ::= { hrStorage 2 } + +hrStorageTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of logical storage areas on + the host. + + An entry shall be placed in the storage table for each + logical area of storage that is allocated and has + fixed resource limits. The amount of storage + represented in an entity is the amount actually usable + by the requesting entity, and excludes loss due to + formatting or file system reference information. + + These entries are associated with logical storage + areas, as might be seen by an application, rather than + physical storage entities which are typically seen by + an operating system. Storage such as tapes and + floppies without file systems on them are typically + not allocated in chunks by the operating system to + requesting applications, and therefore shouldn't + appear in this table. Examples of valid storage for + this table include disk partitions, file systems, ram + (for some architectures this is further segmented into + regular memory, extended memory, and so on), backing + store for virtual memory (`swap space'). + + This table is intended to be a useful diagnostic for + `out of memory' and `out of buffers' types of + failures. In addition, it can be a useful performance + monitoring tool for tracking memory, disk, or buffer + usage." + ::= { hrStorage 3 } + +hrStorageEntry OBJECT-TYPE + SYNTAX HrStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one logical storage area on + the host. As an example, an instance of the + hrStorageType object might be named hrStorageType.3" + INDEX { hrStorageIndex } + ::= { hrStorageTable 1 } + +HrStorageEntry ::= SEQUENCE { + hrStorageIndex Integer32, + hrStorageType AutonomousType, + hrStorageDescr DisplayString, + hrStorageAllocationUnits Integer32, + hrStorageSize Integer32, + hrStorageUsed Integer32, + hrStorageAllocationFailures Counter32 + } + +hrStorageIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each logical storage area + contained by the host." + ::= { hrStorageEntry 1 } + +hrStorageType OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of storage represented by this entry." + ::= { hrStorageEntry 2 } + +hrStorageDescr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the type and instance of the storage + described by this entry." + ::= { hrStorageEntry 3 } + +hrStorageAllocationUnits OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + UNITS "Bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size, in bytes, of the data objects allocated + from this pool. If this entry is monitoring sectors, + blocks, buffers, or packets, for example, this number + will commonly be greater than one. Otherwise this + number will typically be one." + ::= { hrStorageEntry 4 } + +hrStorageSize OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The size of the storage represented by this entry, in + units of hrStorageAllocationUnits. This object is + writable to allow remote configuration of the size of + the storage area in those cases where such an + operation makes sense and is possible on the + underlying system. For example, the amount of main + memory allocated to a buffer pool might be modified or + the amount of disk space allocated to virtual memory + might be modified." + ::= { hrStorageEntry 5 } + +hrStorageUsed OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of the storage represented by this entry + that is allocated, in units of + hrStorageAllocationUnits." + ::= { hrStorageEntry 6 } + +hrStorageAllocationFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of requests for storage represented by + this entry that could not be honored due to not enough + storage. It should be noted that as this object has a + SYNTAX of Counter32, that it does not have a defined + initial value. However, it is recommended that this + object be initialized to zero, even though management + stations must not depend on such an initialization." + ::= { hrStorageEntry 7 } + +-- The Host Resources Device Group +-- +-- The device group is useful for identifying and diagnosing the +-- devices on a system. The hrDeviceTable contains common +-- information for any type of device. In addition, some devices +-- have device-specific tables for more detailed information. More +-- such tables may be defined in the future for other device types. + +-- Registration point for device types, for use with hrDeviceType. + +-- These are defined in the HOST-RESOURCES-TYPES module. +hrDeviceTypes OBJECT IDENTIFIER ::= { hrDevice 1 } + +hrDeviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of devices contained by the + host." + ::= { hrDevice 2 } + +hrDeviceEntry OBJECT-TYPE + SYNTAX HrDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one device contained by the + host. As an example, an instance of the hrDeviceType + object might be named hrDeviceType.3" + INDEX { hrDeviceIndex } + ::= { hrDeviceTable 1 } + +HrDeviceEntry ::= SEQUENCE { + hrDeviceIndex Integer32, + hrDeviceType AutonomousType, + hrDeviceDescr DisplayString, + hrDeviceID ProductID, + hrDeviceStatus INTEGER, + hrDeviceErrors Counter32 + } + +hrDeviceIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each device contained by the host. + The value for each device must remain constant at + least from one re-initialization of the agent to the + next re-initialization." + ::= { hrDeviceEntry 1 } + +hrDeviceType OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of the type of device. + + If this value is + `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry + exists in the hrProcessorTable which corresponds to + this device. + + If this value is + `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry + exists in the hrNetworkTable which corresponds to this + device. + + If this value is + `hrDevicePrinter { hrDeviceTypes 5 }', then an entry + exists in the hrPrinterTable which corresponds to this + device. + + If this value is + `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an + entry exists in the hrDiskStorageTable which + corresponds to this device." + ::= { hrDeviceEntry 2 } + +hrDeviceDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of this device, including the + device's manufacturer and revision, and optionally, + its serial number." + ::= { hrDeviceEntry 3 } + +hrDeviceID OBJECT-TYPE + SYNTAX ProductID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product ID for this device." + ::= { hrDeviceEntry 4 } + +hrDeviceStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + running(2), + warning(3), + testing(4), + down(5) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of the device described + by this row of the table. A value unknown(1) + indicates that the current state of the device is + unknown. running(2) indicates that the device is up + and running and that no unusual error conditions are + known. The warning(3) state indicates that agent has + been informed of an unusual error condition by the + operational software (e.g., a disk device driver) but + that the device is still 'operational'. An example + would be a high number of soft errors on a disk. A + value of testing(4), indicates that the device is not + available for use because it is in the testing state. + The state of down(5) is used only when the agent has + been informed that the device is not available for any + use." + ::= { hrDeviceEntry 5 } + +hrDeviceErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of errors detected on this device. It + should be noted that as this object has a SYNTAX of + Counter32, that it does not have a defined initial + value. However, it is recommended that this object be + initialized to zero, even though management stations + must not depend on such an initialization." + ::= { hrDeviceEntry 6 } + +hrProcessorTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrProcessorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of processors contained by the + host. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the correspondent + value of the hrDeviceType object is + `hrDeviceProcessor'." + ::= { hrDevice 3 } + +hrProcessorEntry OBJECT-TYPE + SYNTAX HrProcessorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one processor contained by + the host. The hrDeviceIndex in the index represents + the entry in the hrDeviceTable that corresponds to the + hrProcessorEntry. + + As an example of how objects in this table are named, + an instance of the hrProcessorFrwID object might be + named hrProcessorFrwID.3" + INDEX { hrDeviceIndex } + ::= { hrProcessorTable 1 } + +HrProcessorEntry ::= SEQUENCE { + hrProcessorFrwID ProductID, + hrProcessorLoad Integer32 + } + +hrProcessorFrwID OBJECT-TYPE + SYNTAX ProductID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product ID of the firmware associated with the + processor." + ::= { hrProcessorEntry 1 } + +hrProcessorLoad OBJECT-TYPE + SYNTAX Integer32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average, over the last minute, of the percentage + of time that this processor was not idle. + Implementations may approximate this one minute + smoothing period if necessary." + ::= { hrProcessorEntry 2 } + +hrNetworkTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrNetworkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of network devices contained + by the host. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the correspondent + value of the hrDeviceType object is + `hrDeviceNetwork'." + ::= { hrDevice 4 } + +hrNetworkEntry OBJECT-TYPE + SYNTAX HrNetworkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one network device contained + by the host. The hrDeviceIndex in the index + represents the entry in the hrDeviceTable that + corresponds to the hrNetworkEntry. + + As an example of how objects in this table are named, + an instance of the hrNetworkIfIndex object might be + named hrNetworkIfIndex.3" + INDEX { hrDeviceIndex } + ::= { hrNetworkTable 1 } + +HrNetworkEntry ::= SEQUENCE { + hrNetworkIfIndex InterfaceIndexOrZero + } + +hrNetworkIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of ifIndex which corresponds to this + network device. If this device is not represented in + the ifTable, then this value shall be zero." + ::= { hrNetworkEntry 1 } + +hrPrinterTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrPrinterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of printers local to the host. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the correspondent + value of the hrDeviceType object is + `hrDevicePrinter'." + ::= { hrDevice 5 } + +hrPrinterEntry OBJECT-TYPE + SYNTAX HrPrinterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one printer local to the + host. The hrDeviceIndex in the index represents the + entry in the hrDeviceTable that corresponds to the + hrPrinterEntry. + + As an example of how objects in this table are named, + an instance of the hrPrinterStatus object might be + named hrPrinterStatus.3" + INDEX { hrDeviceIndex } + ::= { hrPrinterTable 1 } + +HrPrinterEntry ::= SEQUENCE { + hrPrinterStatus INTEGER, + hrPrinterDetectedErrorState OCTET STRING + } + +hrPrinterStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + unknown(2), + idle(3), + printing(4), + warmup(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current status of this printer device." + ::= { hrPrinterEntry 1 } + +hrPrinterDetectedErrorState OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents any error conditions detected + by the printer. The error conditions are encoded as + bits in an octet string, with the following + definitions: + + Condition Bit # + + lowPaper 0 + + noPaper 1 + lowToner 2 + noToner 3 + doorOpen 4 + jammed 5 + offline 6 + serviceRequested 7 + inputTrayMissing 8 + outputTrayMissing 9 + markerSupplyMissing 10 + outputNearFull 11 + outputFull 12 + inputTrayEmpty 13 + overduePreventMaint 14 + + Bits are numbered starting with the most significant + bit of the first byte being bit 0, the least + significant bit of the first byte being bit 7, the + most significant bit of the second byte being bit 8, + and so on. A one bit encodes that the condition was + detected, while a zero bit encodes that the condition + was not detected. + + This object is useful for alerting an operator to + specific warning or error conditions that may occur, + especially those requiring human intervention." + ::= { hrPrinterEntry 2 } + +hrDiskStorageTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrDiskStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of long-term storage devices + contained by the host. In particular, disk devices + accessed remotely over a network are not included + here. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the correspondent + value of the hrDeviceType object is + `hrDeviceDiskStorage'." + ::= { hrDevice 6 } + +hrDiskStorageEntry OBJECT-TYPE + SYNTAX HrDiskStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one long-term storage device + contained by the host. The hrDeviceIndex in the index + represents the entry in the hrDeviceTable that + corresponds to the hrDiskStorageEntry. As an example, + an instance of the hrDiskStorageCapacity object might + be named hrDiskStorageCapacity.3" + INDEX { hrDeviceIndex } + ::= { hrDiskStorageTable 1 } + +HrDiskStorageEntry ::= SEQUENCE { + hrDiskStorageAccess INTEGER, + hrDiskStorageMedia INTEGER, + hrDiskStorageRemoveble TruthValue, + hrDiskStorageCapacity KBytes + } + +hrDiskStorageAccess OBJECT-TYPE + SYNTAX INTEGER { + readWrite(1), + readOnly(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication if this long-term storage device is + readable and writable or only readable. This should + reflect the media type, any write-protect mechanism, + and any device configuration that affects the entire + device." + ::= { hrDiskStorageEntry 1 } + +hrDiskStorageMedia OBJECT-TYPE + SYNTAX INTEGER { + other(1), + unknown(2), + hardDisk(3), + floppyDisk(4), + opticalDiskROM(5), + opticalDiskWORM(6), -- Write Once Read Many + opticalDiskRW(7), + ramDisk(8) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of the type of media used in this long- + term storage device." + ::= { hrDiskStorageEntry 2 } + +hrDiskStorageRemoveble OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Denotes whether or not the disk media may be removed + from the drive." + ::= { hrDiskStorageEntry 3 } + +hrDiskStorageCapacity OBJECT-TYPE + SYNTAX KBytes + UNITS "KBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total size for this long-term storage device. If + the media is removable and is currently removed, this + value should be zero." + ::= { hrDiskStorageEntry 4 } + +hrPartitionTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrPartitionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of partitions for long-term + storage devices contained by the host. In particular, + partitions accessed remotely over a network are not + included here." + ::= { hrDevice 7 } + +hrPartitionEntry OBJECT-TYPE + SYNTAX HrPartitionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one partition. The + hrDeviceIndex in the index represents the entry in the + hrDeviceTable that corresponds to the + hrPartitionEntry. + + As an example of how objects in this table are named, + an instance of the hrPartitionSize object might be + named hrPartitionSize.3.1" + INDEX { hrDeviceIndex, hrPartitionIndex } + ::= { hrPartitionTable 1 } + +HrPartitionEntry ::= SEQUENCE { + hrPartitionIndex Integer32, + hrPartitionLabel InternationalDisplayString, + hrPartitionID OCTET STRING, + hrPartitionSize KBytes, + hrPartitionFSIndex Integer32 + } + +hrPartitionIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each partition on this long-term + storage device. The value for each long-term storage + device must remain constant at least from one re- + initialization of the agent to the next re- + initialization." + ::= { hrPartitionEntry 1 } + +hrPartitionLabel OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of this partition." + ::= { hrPartitionEntry 2 } + +hrPartitionID OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A descriptor which uniquely represents this partition + to the responsible operating system. On some systems, + this might take on a binary representation." + ::= { hrPartitionEntry 3 } + +hrPartitionSize OBJECT-TYPE + SYNTAX KBytes + UNITS "KBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size of this partition." + ::= { hrPartitionEntry 4 } + +hrPartitionFSIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the file system mounted on this + partition. If no file system is mounted on this + partition, then this value shall be zero. Note that + multiple partitions may point to one file system, + denoting that that file system resides on those + partitions. Multiple file systems may not reside on + one partition." + ::= { hrPartitionEntry 5 } + +-- The File System Table + +-- Registration point for popular File System types, +-- for use with hrFSType. These are defined in the +-- HOST-RESOURCES-TYPES module. +hrFSTypes OBJECT IDENTIFIER ::= { hrDevice 9 } + +hrFSTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrFSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of file systems local to this + host or remotely mounted from a file server. File + systems that are in only one user's environment on a + multi-user system will not be included in this table." + ::= { hrDevice 8 } + +hrFSEntry OBJECT-TYPE + SYNTAX HrFSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one file system local to + this host or remotely mounted from a file server. + File systems that are in only one user's environment + on a multi-user system will not be included in this + table. + + As an example of how objects in this table are named, + an instance of the hrFSMountPoint object might be + named hrFSMountPoint.3" + INDEX { hrFSIndex } + ::= { hrFSTable 1 } + +HrFSEntry ::= SEQUENCE { + hrFSIndex Integer32, + hrFSMountPoint InternationalDisplayString, + hrFSRemoteMountPoint InternationalDisplayString, + hrFSType AutonomousType, + hrFSAccess INTEGER, + hrFSBootable TruthValue, + hrFSStorageIndex Integer32, + hrFSLastFullBackupDate DateAndTime, + hrFSLastPartialBackupDate DateAndTime + } + +hrFSIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each file system local to this + host. The value for each file system must remain + constant at least from one re-initialization of the + agent to the next re-initialization." + ::= { hrFSEntry 1 } + +hrFSMountPoint OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The path name of the root of this file system." + ::= { hrFSEntry 2 } + +hrFSRemoteMountPoint OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the name and/or address of the + server that this file system is mounted from. This + may also include parameters such as the mount point on + the remote file system. If this is not a remote file + system, this string should have a length of zero." + ::= { hrFSEntry 3 } + +hrFSType OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object identifies the type of this + file system." + ::= { hrFSEntry 4 } + +hrFSAccess OBJECT-TYPE + SYNTAX INTEGER { + readWrite(1), + readOnly(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication if this file system is logically + configured by the operating system to be readable and + writable or only readable. This does not represent + any local access-control policy, except one that is + applied to the file system as a whole." + ::= { hrFSEntry 5 } + +hrFSBootable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A flag indicating whether this file system is + bootable." + ::= { hrFSEntry 6 } + +hrFSStorageIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the hrStorageEntry that represents + information about this file system. If there is no + such information available, then this value shall be + zero. The relevant storage entry will be useful in + tracking the percent usage of this file system and + diagnosing errors that may occur when it runs out of + space." + ::= { hrFSEntry 7 } + +hrFSLastFullBackupDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The last date at which this complete file system was + + copied to another storage device for backup. This + information is useful for ensuring that backups are + being performed regularly. + + If this information is not known, then this variable + shall have the value corresponding to January 1, year + 0000, 00:00:00.0, which is encoded as + (hex)'00 00 01 01 00 00 00 00'." + ::= { hrFSEntry 8 } + +hrFSLastPartialBackupDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The last date at which a portion of this file system + was copied to another storage device for backup. This + information is useful for ensuring that backups are + being performed regularly. + + If this information is not known, then this variable + shall have the value corresponding to January 1, year + 0000, 00:00:00.0, which is encoded as + (hex)'00 00 01 01 00 00 00 00'." + ::= { hrFSEntry 9 } + +-- The Host Resources Running Software Group +-- +-- The hrSWRunTable contains an entry for each distinct piece of +-- software that is running or loaded into physical or virtual +-- memory in preparation for running. This includes the host's +-- operating system, device drivers, and applications. + +hrSWOSIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of the hrSWRunIndex for the hrSWRunEntry + that represents the primary operating system running + on this host. This object is useful for quickly and + uniquely identifying that primary operating system." + ::= { hrSWRun 1 } + +hrSWRunTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrSWRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of software running on the + host." + ::= { hrSWRun 2 } + +hrSWRunEntry OBJECT-TYPE + SYNTAX HrSWRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one piece of software + running on the host Note that because the installed + software table only contains information for software + stored locally on this host, not every piece of + running software will be found in the installed + software table. This is true of software that was + loaded and run from a non-local source, such as a + network-mounted file system. + + As an example of how objects in this table are named, + an instance of the hrSWRunName object might be named + hrSWRunName.1287" + INDEX { hrSWRunIndex } + ::= { hrSWRunTable 1 } + +HrSWRunEntry ::= SEQUENCE { + hrSWRunIndex Integer32, + hrSWRunName InternationalDisplayString, + hrSWRunID ProductID, + hrSWRunPath InternationalDisplayString, + hrSWRunParameters InternationalDisplayString, + hrSWRunType INTEGER, + hrSWRunStatus INTEGER + } + +hrSWRunIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each piece of software running on + the host. Wherever possible, this should be the + system's native, unique identification number." + ::= { hrSWRunEntry 1 } + +hrSWRunName OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of this running piece of + software, including the manufacturer, revision, and + the name by which it is commonly known. If this + software was installed locally, this should be the + same string as used in the corresponding + hrSWInstalledName." + ::= { hrSWRunEntry 2 } + +hrSWRunID OBJECT-TYPE + SYNTAX ProductID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product ID of this running piece of software." + ::= { hrSWRunEntry 3 } + +hrSWRunPath OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the location on long-term storage + (e.g. a disk drive) from which this software was + loaded." + ::= { hrSWRunEntry 4 } + +hrSWRunParameters OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the parameters supplied to this + software when it was initially loaded." + ::= { hrSWRunEntry 5 } + +hrSWRunType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + operatingSystem(2), + deviceDriver(3), + application(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of this software." + ::= { hrSWRunEntry 6 } + +hrSWRunStatus OBJECT-TYPE + SYNTAX INTEGER { + running(1), + runnable(2), -- waiting for resource + -- (i.e., CPU, memory, IO) + notRunnable(3), -- loaded but waiting for event + invalid(4) -- not loaded + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of this running piece of software. + Setting this value to invalid(4) shall cause this + software to stop running and to be unloaded. Sets to + other values are not valid." + ::= { hrSWRunEntry 7 } + +-- The Host Resources Running Software Performance Group +-- +-- The hrSWRunPerfTable contains an entry corresponding to +-- each entry in the hrSWRunTable. + +hrSWRunPerfTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrSWRunPerfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of running software + performance metrics." + ::= { hrSWRunPerf 1 } + +hrSWRunPerfEntry OBJECT-TYPE + SYNTAX HrSWRunPerfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry containing software performance + metrics. As an example, an instance of the + hrSWRunPerfCPU object might be named + hrSWRunPerfCPU.1287" + AUGMENTS { hrSWRunEntry } -- This table augments information in + -- the hrSWRunTable. + ::= { hrSWRunPerfTable 1 } + +HrSWRunPerfEntry ::= SEQUENCE { + hrSWRunPerfCPU Integer32, + hrSWRunPerfMem KBytes +} + +hrSWRunPerfCPU OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of centi-seconds of the total system's CPU + resources consumed by this process. Note that on a + multi-processor system, this value may increment by + more than one centi-second in one centi-second of real + (wall clock) time." + ::= { hrSWRunPerfEntry 1 } + +hrSWRunPerfMem OBJECT-TYPE + SYNTAX KBytes + UNITS "KBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of real system memory allocated to + this process." + ::= { hrSWRunPerfEntry 2 } + +-- The Host Resources Installed Software Group +-- +-- The hrSWInstalledTable contains an entry for each piece +-- of software installed in long-term storage (e.g. a disk +-- drive) locally on this host. Note that this does not +-- include software loadable remotely from a network +-- server. +-- +-- Different implementations may track software in varying +-- ways. For example, while some implementations may track +-- executable files as distinct pieces of software, other +-- implementations may use other strategies such as keeping +-- track of software "packages" (e.g., related groups of files) +-- or keeping track of system or application "patches". +-- +-- This table is useful for identifying and inventorying +-- software on a host and for diagnosing incompatibility +-- and version mismatch problems between various pieces +-- of hardware and software. + +hrSWInstalledLastChange OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when an entry in the + hrSWInstalledTable was last added, renamed, or + deleted. Because this table is likely to contain many + entries, polling of this object allows a management + station to determine when re-downloading of the table + might be useful." + ::= { hrSWInstalled 1 } + +hrSWInstalledLastUpdateTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the hrSWInstalledTable + was last completely updated. Because caching of this + data will be a popular implementation strategy, + retrieval of this object allows a management station + to obtain a guarantee that no data in this table is + older than the indicated time." + ::= { hrSWInstalled 2 } + +hrSWInstalledTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrSWInstalledEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of software installed on this + host." + ::= { hrSWInstalled 3 } + +hrSWInstalledEntry OBJECT-TYPE + SYNTAX HrSWInstalledEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for a piece of software + installed on this host. + + As an example of how objects in this table are named, + an instance of the hrSWInstalledName object might be + named hrSWInstalledName.96" + INDEX { hrSWInstalledIndex } + ::= { hrSWInstalledTable 1 } + +HrSWInstalledEntry ::= SEQUENCE { + hrSWInstalledIndex Integer32, + hrSWInstalledName InternationalDisplayString, + hrSWInstalledID ProductID, + hrSWInstalledType INTEGER, + hrSWInstalledDate DateAndTime +} + +hrSWInstalledIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each piece of software installed + on the host. This value shall be in the range from 1 + to the number of pieces of software installed on the + host." + ::= { hrSWInstalledEntry 1 } + +hrSWInstalledName OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of this installed piece of + software, including the manufacturer, revision, the + name by which it is commonly known, and optionally, + its serial number." + ::= { hrSWInstalledEntry 2 } + +hrSWInstalledID OBJECT-TYPE + SYNTAX ProductID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product ID of this installed piece of software." + ::= { hrSWInstalledEntry 3 } + +hrSWInstalledType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + operatingSystem(2), + deviceDriver(3), + application(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of this software." + ::= { hrSWInstalledEntry 4 } + +hrSWInstalledDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The last-modification date of this application as it + would appear in a directory listing. + + If this information is not known, then this variable + shall have the value corresponding to January 1, year + 0000, 00:00:00.0, which is encoded as + (hex)'00 00 01 01 00 00 00 00'." + ::= { hrSWInstalledEntry 5 } + +-- Conformance information + +hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 } +hrMIBGroups OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 } + +-- Compliance Statements +hrMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The requirements for conformance to the Host Resources MIB." + MODULE -- this module + MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup, + hrDeviceGroup } + + OBJECT hrSystemDate + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrSystemInitialLoadDevice + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrSystemInitialLoadParameters + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrStorageSize + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrFSLastFullBackupDate + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrFSLastPartialBackupDate + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + GROUP hrSWRunGroup + DESCRIPTION + "The Running Software Group. Implementation + of this group is mandatory only when the + hrSWRunPerfGroup is implemented." + + OBJECT hrSWRunStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + GROUP hrSWRunPerfGroup + DESCRIPTION + "The Running Software Performance Group. + Implementation of this group is at the discretion + of the implementor." + + GROUP hrSWInstalledGroup + DESCRIPTION + "The Installed Software Group. + Implementation of this group is at the discretion + of the implementor." + ::= { hrMIBCompliances 1 } + + hrSystemGroup OBJECT-GROUP + OBJECTS { + hrSystemUptime, hrSystemDate, + hrSystemInitialLoadDevice, + hrSystemInitialLoadParameters, + hrSystemNumUsers, hrSystemProcesses, + hrSystemMaxProcesses + } + STATUS current + DESCRIPTION + "The Host Resources System Group." + ::= { hrMIBGroups 1 } + + hrStorageGroup OBJECT-GROUP + OBJECTS { + hrMemorySize, hrStorageIndex, hrStorageType, + hrStorageDescr, hrStorageAllocationUnits, + hrStorageSize, hrStorageUsed, + hrStorageAllocationFailures + } + STATUS current + DESCRIPTION + "The Host Resources Storage Group." + ::= { hrMIBGroups 2 } + + hrDeviceGroup OBJECT-GROUP + OBJECTS { + hrDeviceIndex, hrDeviceType, hrDeviceDescr, + hrDeviceID, hrDeviceStatus, hrDeviceErrors, + hrProcessorFrwID, hrProcessorLoad, + hrNetworkIfIndex, hrPrinterStatus, + hrPrinterDetectedErrorState, + hrDiskStorageAccess, hrDiskStorageMedia, + hrDiskStorageRemoveble, hrDiskStorageCapacity, + hrPartitionIndex, hrPartitionLabel, + hrPartitionID, hrPartitionSize, + hrPartitionFSIndex, hrFSIndex, hrFSMountPoint, + hrFSRemoteMountPoint, hrFSType, hrFSAccess, + hrFSBootable, hrFSStorageIndex, + hrFSLastFullBackupDate, + hrFSLastPartialBackupDate + } + STATUS current + DESCRIPTION + "The Host Resources Device Group." + ::= { hrMIBGroups 3 } + + hrSWRunGroup OBJECT-GROUP + OBJECTS { + hrSWOSIndex, hrSWRunIndex, hrSWRunName, + hrSWRunID, hrSWRunPath, hrSWRunParameters, + hrSWRunType, hrSWRunStatus + } + STATUS current + DESCRIPTION + "The Host Resources Running Software Group." + ::= { hrMIBGroups 4 } + + hrSWRunPerfGroup OBJECT-GROUP + OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem } + STATUS current + DESCRIPTION + "The Host Resources Running Software + Performance Group." + ::= { hrMIBGroups 5 } + + hrSWInstalledGroup OBJECT-GROUP + OBJECTS { + hrSWInstalledLastChange, + hrSWInstalledLastUpdateTime, + hrSWInstalledIndex, hrSWInstalledName, + hrSWInstalledID, hrSWInstalledType, + hrSWInstalledDate + } + STATUS current + DESCRIPTION + "The Host Resources Installed Software Group." + ::= { hrMIBGroups 6 } + +END |