diff options
Diffstat (limited to 'mibs/NETWORK-SERVICES-MIB.txt')
| -rw-r--r-- | mibs/NETWORK-SERVICES-MIB.txt | 626 |
1 files changed, 626 insertions, 0 deletions
diff --git a/mibs/NETWORK-SERVICES-MIB.txt b/mibs/NETWORK-SERVICES-MIB.txt new file mode 100644 index 0000000..0f2cabe --- /dev/null +++ b/mibs/NETWORK-SERVICES-MIB.txt @@ -0,0 +1,626 @@ +NETWORK-SERVICES-MIB DEFINITIONS ::= BEGIN + +IMPORTS + OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY, mib-2 + FROM SNMPv2-SMI + TimeStamp, TEXTUAL-CONVENTION + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB; + +application MODULE-IDENTITY + LAST-UPDATED "200003030000Z" + ORGANIZATION "IETF Mail and Directory Management Working Group" + + CONTACT-INFO + " Ned Freed + + Postal: Innosoft International, Inc. + 1050 Lakes Drive + West Covina, CA 91790 + US + + Tel: +1 626 919 3600 + Fax: +1 626 919 3614 + + E-Mail: ned.freed@innosoft.com" + DESCRIPTION + "The MIB module describing network service applications" + REVISION "200003030000Z" + DESCRIPTION + "This revision, published in RFC 2788, changes a number of + DisplayStrings to SnmpAdminStrings. Note that this change + is not strictly supported by SMIv2. However, the alternative + of deprecating the old objects and defining new objects + would have a more adverse impact on backward compatibility + and interoperability, given the particular semantics of + these objects. The defining reference for distinguished + names has also been updated from RFC 1779 to RFC 2253." + REVISION "199905120000Z" + DESCRIPTION + "This revision fixes a few small technical problems found + in previous versions, mostly in regards to the conformance + groups for different versions of this MIB. No changes have + been made to the objects this MIB defines since RFC 2248." + REVISION "199708170000Z" + DESCRIPTION + "This revision, published in RFC 2248, adds the + applDescription and applURL objects, adds the quiescing + state to the applOperStatus object and renames the MIB + from the APPLICATION-MIB to the NETWORK-SERVICE-MIB." + REVISION "199311280000Z" + DESCRIPTION + "The original version of this MIB was published in RFC 1565" + ::= {mib-2 27} + +-- Textual conventions + +-- DistinguishedName is used to refer to objects in the +-- directory. + +DistinguishedName ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "A Distinguished Name represented in accordance with + RFC 2253, presented in the UTF-8 charset defined in + RFC 2279." + SYNTAX OCTET STRING (SIZE (0..255)) + +-- Uniform Resource Locators are stored in URLStrings. + +URLString ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "A Uniform Resource Locator represented in accordance + with RFCs 1738 and 2368, presented in the NVT ASCII + charset defined in RFC 854." + SYNTAX OCTET STRING (SIZE (0..255)) + +-- The basic applTable contains a list of the application +-- entities. + +applTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApplEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table holding objects which apply to all different + kinds of applications providing network services. + Each network service application capable of being + monitored should have a single entry in this table." + ::= {application 1} + +applEntry OBJECT-TYPE + SYNTAX ApplEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry associated with a single network service + application." + INDEX {applIndex} + ::= {applTable 1} + +ApplEntry ::= SEQUENCE { + applIndex + INTEGER, + applName + SnmpAdminString, + applDirectoryName + + DistinguishedName, + applVersion + SnmpAdminString, + applUptime + TimeStamp, + applOperStatus + INTEGER, + applLastChange + TimeStamp, + applInboundAssociations + Gauge32, + applOutboundAssociations + Gauge32, + applAccumulatedInboundAssociations + Counter32, + applAccumulatedOutboundAssociations + Counter32, + applLastInboundActivity + TimeStamp, + applLastOutboundActivity + TimeStamp, + applRejectedInboundAssociations + Counter32, + applFailedOutboundAssociations + Counter32, + applDescription + SnmpAdminString, + applURL + URLString +} + +applIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index to uniquely identify the network service + application. This attribute is the index used for + lexicographic ordering of the table." + ::= {applEntry 1} + +applName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name the network service application chooses to be + known by." + ::= {applEntry 2} + +applDirectoryName OBJECT-TYPE + SYNTAX DistinguishedName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Distinguished Name of the directory entry where + static information about this application is stored. + An empty string indicates that no information about + the application is available in the directory." + ::= {applEntry 3} + +applVersion OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of network service application software. + This field is usually defined by the vendor of the + network service application software." + ::= {applEntry 4} +applUptime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time the network service + application was last initialized. If the application was + last initialized prior to the last initialization of the + network management subsystem, then this object contains + a zero value." + ::= {applEntry 5} + +applOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + halted(3), + congested(4), + restarting(5), + quiescing(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the operational status of the network service + application. 'down' indicates that the network service is + + not available. 'up' indicates that the network service + is operational and available. 'halted' indicates that the + service is operational but not available. 'congested' + indicates that the service is operational but no additional + inbound associations can be accommodated. 'restarting' + indicates that the service is currently unavailable but is + in the process of restarting and will be available soon. + 'quiescing' indicates that service is currently operational + but is in the process of shutting down. Additional inbound + associations may be rejected by applications in the + 'quiescing' state." + ::= {applEntry 6} + +applLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time the network service + application entered its current operational state. If + the current state was entered prior to the last + initialization of the local network management subsystem, + then this object contains a zero value." + ::= {applEntry 7} + +applInboundAssociations OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current associations to the network service + application, where it is the responder. An inbound + association occurs when another application successfully + connects to this one." + ::= {applEntry 8} + +applOutboundAssociations OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current associations to the network service + application, where it is the initiator. An outbound + association occurs when this application successfully + connects to another one." + ::= {applEntry 9} + +applAccumulatedInboundAssociations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of associations to the application entity + since application initialization, where it was the responder." + ::= {applEntry 10} + +applAccumulatedOutboundAssociations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of associations to the application entity + since application initialization, where it was the initiator." + ::= {applEntry 11} + +applLastInboundActivity OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this application last + had an inbound association. If the last association + occurred prior to the last initialization of the network + subsystem, then this object contains a zero value." + ::= {applEntry 12} + +applLastOutboundActivity OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this application last + had an outbound association. If the last association + occurred prior to the last initialization of the network + subsystem, then this object contains a zero value." + ::= {applEntry 13} + +applRejectedInboundAssociations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of inbound associations the application + entity has rejected, since application initialization. + Rejected associations are not counted in the accumulated + association totals. Note that this only counts + + associations the application entity has rejected itself; + it does not count rejections that occur at lower layers + of the network. Thus, this counter may not reflect the + true number of failed inbound associations." + ::= {applEntry 14} + +applFailedOutboundAssociations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number associations where the application entity + is initiator and association establishment has failed, + since application initialization. Failed associations are + not counted in the accumulated association totals." + ::= {applEntry 15} + +applDescription OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A text description of the application. This information + is intended to identify and briefly describe the + application in a status display." + ::= {applEntry 16} + +applURL OBJECT-TYPE + SYNTAX URLString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A URL pointing to a description of the application. + This information is intended to identify and describe + the application in a status display." + ::= {applEntry 17} + +-- The assocTable augments the information in the applTable +-- with information about associations. Note that two levels +-- of compliance are specified below, depending on whether +-- association monitoring is mandated. + +assocTable OBJECT-TYPE + SYNTAX SEQUENCE OF AssocEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table holding a set of all active application + + associations." + ::= {application 2} + +assocEntry OBJECT-TYPE + SYNTAX AssocEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry associated with an association for a network + service application." + INDEX {applIndex, assocIndex} + ::= {assocTable 1} + +AssocEntry ::= SEQUENCE { + assocIndex + INTEGER, + assocRemoteApplication + SnmpAdminString, + assocApplicationProtocol + OBJECT IDENTIFIER, + assocApplicationType + INTEGER, + assocDuration + TimeStamp +} + +assocIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index to uniquely identify each association for a network + service application. This attribute is the index that is + used for lexicographic ordering of the table. Note that the + table is also indexed by the applIndex." + ::= {assocEntry 1} + +assocRemoteApplication OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the system running remote network service + application. For an IP-based application this should be + either a domain name or IP address. For an OSI application + it should be the string encoded distinguished name of the + managed object. For X.400(1984) MTAs which do not have a + Distinguished Name, the RFC 2156 syntax 'mta in + + globalid' used in X400-Received: fields can be used. Note, + however, that not all connections an MTA makes are + necessarily to another MTA." + ::= {assocEntry 2} + +assocApplicationProtocol OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An identification of the protocol being used for the + application. For an OSI Application, this will be the + Application Context. For Internet applications, OID + values of the form {applTCPProtoID port} or {applUDPProtoID + port} are used for TCP-based and UDP-based protocols, + respectively. In either case 'port' corresponds to the + primary port number being used by the protocol. The + usual IANA procedures may be used to register ports for + new protocols." + ::= {assocEntry 3} + +assocApplicationType OBJECT-TYPE + SYNTAX INTEGER { + uainitiator(1), + uaresponder(2), + peerinitiator(3), + peerresponder(4)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates whether the remote application is some type of + client making use of this network service (e.g., a Mail User + Agent) or a server acting as a peer. Also indicated is whether + the remote end initiated an incoming connection to the network + service or responded to an outgoing connection made by the + local application. MTAs and messaging gateways are + considered to be peers for the purposes of this variable." + ::= {assocEntry 4} + +assocDuration OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this association was + started. If this association started prior to the last + initialization of the network subsystem, then this + object contains a zero value." + ::= {assocEntry 5} + +-- Conformance information + +applConformance OBJECT IDENTIFIER ::= {application 3} + +applGroups OBJECT IDENTIFIER ::= {applConformance 1} +applCompliances OBJECT IDENTIFIER ::= {applConformance 2} + +-- Compliance statements + +applCompliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "The compliance statement for RFC 1565 implementations + which support the Network Services Monitoring MIB + for basic monitoring of network service applications. + This is the basic compliance statement for RFC 1565." + MODULE + MANDATORY-GROUPS {applRFC1565Group} + ::= {applCompliances 1} + +assocCompliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "The compliance statement for RFC 1565 implementations + which support the Network Services Monitoring MIB + for basic monitoring of network service applications + and their associations." + MODULE + MANDATORY-GROUPS {applRFC1565Group, assocRFC1565Group} + ::= {applCompliances 2} + +applRFC2248Compliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for RFC 2248 implementations + which support the Network Services Monitoring MIB + for basic monitoring of network service applications." + MODULE + MANDATORY-GROUPS {applRFC2248Group} + ::= {applCompliances 3} + +assocRFC2248Compliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for RFC 2248 implementations + + which support the Network Services Monitoring MIB for + basic monitoring of network service applications and + their associations." + MODULE + MANDATORY-GROUPS {applRFC2248Group, assocRFC2248Group} + ::= {applCompliances 4} + +applRFC2788Compliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for RFC 2788 implementations + which support the Network Services Monitoring MIB + for basic monitoring of network service applications." + MODULE + MANDATORY-GROUPS {applRFC2788Group} + ::= {applCompliances 5} + +assocRFC2788Compliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for RFC 2788 implementations + which support the Network Services Monitoring MIB for + basic monitoring of network service applications and + their associations." + MODULE + MANDATORY-GROUPS {applRFC2788Group, assocRFC2788Group} + ::= {applCompliances 6} + +-- Units of conformance + +applRFC1565Group OBJECT-GROUP + OBJECTS { + applName, applVersion, applUptime, applOperStatus, + applLastChange, applInboundAssociations, + applOutboundAssociations, applAccumulatedInboundAssociations, + applAccumulatedOutboundAssociations, applLastInboundActivity, + applLastOutboundActivity, applRejectedInboundAssociations, + applFailedOutboundAssociations} + STATUS obsolete + DESCRIPTION + "A collection of objects providing basic monitoring of + network service applications. This is the original set + of such objects defined in RFC 1565." + ::= {applGroups 7} + +assocRFC1565Group OBJECT-GROUP + OBJECTS { + + assocRemoteApplication, assocApplicationProtocol, + assocApplicationType, assocDuration} + STATUS obsolete + DESCRIPTION + "A collection of objects providing basic monitoring of + network service applications' associations. This is the + original set of such objects defined in RFC 1565." + ::= {applGroups 2} + +applRFC2248Group OBJECT-GROUP + OBJECTS { + applName, applVersion, applUptime, applOperStatus, + applLastChange, applInboundAssociations, + applOutboundAssociations, applAccumulatedInboundAssociations, + applAccumulatedOutboundAssociations, applLastInboundActivity, + applLastOutboundActivity, applRejectedInboundAssociations, + applFailedOutboundAssociations, applDescription, applURL} + STATUS deprecated + DESCRIPTION + "A collection of objects providing basic monitoring of + network service applications. This group was originally + defined in RFC 2248; note that applDirectoryName is + missing." + ::= {applGroups 3} + +assocRFC2248Group OBJECT-GROUP + OBJECTS { + assocRemoteApplication, assocApplicationProtocol, + assocApplicationType, assocDuration} + STATUS deprecated + DESCRIPTION + "A collection of objects providing basic monitoring of + network service applications' associations. This group + was originally defined by RFC 2248." + ::= {applGroups 4} + +applRFC2788Group OBJECT-GROUP + OBJECTS { + applName, applDirectoryName, applVersion, applUptime, + applOperStatus, applLastChange, applInboundAssociations, + applOutboundAssociations, applAccumulatedInboundAssociations, + applAccumulatedOutboundAssociations, applLastInboundActivity, + applLastOutboundActivity, applRejectedInboundAssociations, + applFailedOutboundAssociations, applDescription, applURL} + STATUS current + DESCRIPTION + "A collection of objects providing basic monitoring of + network service applications. This is the appropriate + + group for RFC 2788 -- it adds the applDirectoryName object + missing in RFC 2248." + ::= {applGroups 5} + +assocRFC2788Group OBJECT-GROUP + OBJECTS { + assocRemoteApplication, assocApplicationProtocol, + assocApplicationType, assocDuration} + STATUS current + DESCRIPTION + "A collection of objects providing basic monitoring of + network service applications' associations. This is + the appropriate group for RFC 2788." + ::= {applGroups 6} + +-- OIDs of the form {applTCPProtoID port} are intended to be used +-- for TCP-based protocols that don't have OIDs assigned by other +-- means. {applUDPProtoID port} serves the same purpose for +-- UDP-based protocols. In either case 'port' corresponds to +-- the primary port number being used by the protocol. For example, +-- assuming no other OID is assigned for SMTP, an OID of +-- {applTCPProtoID 25} could be used, since SMTP is a TCP-based +-- protocol that uses port 25 as its primary port. + +applTCPProtoID OBJECT IDENTIFIER ::= {application 4} +applUDPProtoID OBJECT IDENTIFIER ::= {application 5} + +END |