diff options
Diffstat (limited to 'mibs/UCD-SNMP-MIB-OLD.txt')
| -rw-r--r-- | mibs/UCD-SNMP-MIB-OLD.txt | 744 |
1 files changed, 744 insertions, 0 deletions
diff --git a/mibs/UCD-SNMP-MIB-OLD.txt b/mibs/UCD-SNMP-MIB-OLD.txt new file mode 100644 index 0000000..b432ee3 --- /dev/null +++ b/mibs/UCD-SNMP-MIB-OLD.txt @@ -0,0 +1,744 @@ +UCD-SNMP-MIB-OLD DEFINITIONS ::= BEGIN + +-- +-- This mib is a badly created mib which has been replaced by a more +-- properly created UCD-SNMP-MIB. Use that mib instead. This file +-- exists for historical purposes only and for use by people that +-- need to support both agent versions. +-- + +IMPORTS + ucdavis + FROM UCD-SNMP-MIB + OBJECT-TYPE + FROM SNMPv2-SMI + DisplayString + FROM SNMPv2-TC + Integer32 + FROM SNMPv2-SMI; + +-- private OBJECT IDENTIFIER ::= { internet 4 } +-- enterprises OBJECT IDENTIFIER ::= { private 1 } +-- ucdavis OBJECT IDENTIFIER ::= { enterprises 2021 } +-- processes OBJECT IDENTIFIER ::= { ucdavis 1 } +-- exec OBJECT IDENTIFIER ::= { ucdavis 3 } +-- memory OBJECT IDENTIFIER ::= { ucdavis 4 } +-- lockd OBJECT IDENTIFIER ::= { ucdavis 5 } +-- disk OBJECT IDENTIFIER ::= { ucdavis 6 } +-- load OBJECT IDENTIFIER ::= { ucdavis 7 } +-- version OBJECT IDENTIFIER ::= { ucdavis 100 } +-- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } +-- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 } + +-- These are the returned values of the agent type. +-- returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 + +-- The following section is commented out since it is defined in the +-- current UCD-SNMP-MIB + +-- ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 } +-- hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 } +-- hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 } +-- sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 } +-- solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 } +-- osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 } +-- ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 } +-- netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 } +-- freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 } +-- irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 } +-- linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 } +-- bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 } +-- unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 } + + + +Processes ::= SEQUENCE { + processIndex INTEGER, + processNames DisplayString, + processMin INTEGER, + processMax INTEGER, + processCount INTEGER, + processErrorFlag INTEGER, + processErrMessage DisplayString, + processErrFix INTEGER +} + +processes OBJECT-TYPE + SYNTAX SEQUENCE OF Processes + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A set of information on running programs/daemons." + INDEX { processIndex } + ::= { ucdavis 1 } + +processIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Reference Index for each observed process." + ::= { processes 1 } + +processNames OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The table of process names we're Counting." + ::= { processes 2 } + +processMin OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The minimum number of processes that should be + running. An error flag is generated if the number of + running processes is < the minimum." + ::= { processes 3 } + +processMax OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of processes that should be + running. An error flag is generated if the number of + running processes is > the maximum." + ::= { processes 4 } + +processCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of current processes running with the name + in question." + ::= { processes 5 } + +processErrorFlag OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A Error flag to indicate trouble with a process. It + goes to 1 if there is an error, 0 if no error." + ::= { processes 100 } + +processErrMessage OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An error message describing the problem (if one exists)." + ::= { processes 101 } + +processErrFix OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this to one will try to fix the problem if possible." + ::= { processes 102 } + +extensible OBJECT-TYPE + SYNTAX SEQUENCE OF Extensible + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Extensible commands returning output and result codes." + INDEX { extensibleIndex } + ::= { ucdavis 3 } + +Extensible ::= SEQUENCE { + extensibleIndex INTEGER, + extensibleNames DisplayString, + extensibleCommand DisplayString, + extensibleResult INTEGER, + extensibleOutput DisplayString, + extensibleErrFix INTEGER +} + +extensibleIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Reference Index for extensible calls." + ::= { extensible 1 } + +extensibleNames OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Short, one name descriptions of the extensible commands." + ::= { extensible 2 } + +extensibleCommand OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The command line to be executed." + ::= { extensible 3 } + +extensibleResult OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The result code from the executed command." + ::= { extensible 100 } + +extensibleOutput OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The output of the extensible command (top line only)." + ::= { extensible 101 } + +extensibleErrFix OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Set to 1 to fix the problem, if possible." + ::= { extensible 102 } + +-- the following section is commented out because it is already +-- defined in the current UCD-SNMP-MIB + +-- memory OBJECT-TYPE +-- SYNTAX Memory +-- ACCESS not-accessible +-- STATUS mandatory +-- DESCRIPTION +-- "Miscellanous stuff - memory related." +-- ::= { ucdavis 4 } +-- +-- Memory ::= SEQUENCE { +-- memIndex INTEGER, +-- memErrorName DisplayString, +-- memTotalSwap INTEGER, +-- memAvailSwap INTEGER, +-- memTotalReal INTEGER, +-- memAvailReal INTEGER, +-- memTotalSwapTXT INTEGER, +-- memAvailSwapTXT INTEGER, +-- memTotalRealTXT INTEGER, +-- memAvailRealTXT INTEGER, +-- memTotalFree INTEGER, +-- memMinimumSwap INTEGER, +-- memSwapError DisplayString, +-- memShared INTEGER, +-- memBuffer INTEGER, +-- memCached INTEGER +-- } +-- memIndex OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Generic Index." +-- ::= { memory 1 } +-- +-- memErrorName OBJECT-TYPE +-- SYNTAX DisplayString +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Bogus Name (swap) for consistancy with the rest of the mibs." +-- ::= { memory 2 } +-- +-- memTotalSwap OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Total Swap Size." +-- ::= { memory 3 } +-- +-- memAvailSwap OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Available Swap Space." +-- ::= { memory 4 } +-- +-- memTotalReal OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Total Real/Physical Memory Size." +-- ::= { memory 5 } +-- +-- memAvailReal OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Available Real/Physical Memory Space." +-- ::= { memory 6 } +-- +-- memTotalSwapTXT OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Total VM used by text." +-- ::= { memory 7 } +-- +-- memAvailSwapTXT OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Active VM used by text." +-- ::= { memory 8 } +-- +-- memTotalRealTXT OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Total Real/Physical Memory Size used by txt." +-- ::= { memory 9 } +-- +-- memAvailRealTXT OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Active Real/Physical Memory Space used by txt." +-- ::= { memory 10 } +-- +-- memTotalFree OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Total Available Memory" +-- ::= { memory 11 } +-- +-- memMinimumSwap OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Minimum amount of free swap. Otherwise memErrorSwap +-- is set to 1 " +-- ::= { memory 12 } +-- +-- memShared OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Total Shared Memory" +-- ::= { memory 13 } +-- +-- memBuffer OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Total Buffered Memory" +-- ::= { memory 14 } +-- +-- memCached OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Total Cached Memory" +-- ::= { memory 15 } +-- +-- memSwapError OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Error flag. 1 indicates very little swap space left" +-- ::= { memory 100 } +-- +-- memSwapErrorMsg OBJECT-TYPE +-- SYNTAX DisplayString +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Error message describing the errorflag condition" +-- ::= { memory 101 } +-- +-- lockd OBJECT-TYPE +-- SYNTAX Lockd +-- ACCESS not-accessible +-- STATUS mandatory +-- DESCRIPTION +-- "Tests the functionality of the rpc.lockd/rpc.statd pair." +-- INDEX { lockdIndex } +-- ::= { ucdavis 5 } + +-- Lockd ::= SEQUENCE { +-- lockdIndex INTEGER, +-- lockdError INTEGER, +-- lockdErrorMsg DisplayString +-- } +-- +-- lockdIndex OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Reference Index for lockd calls." +-- ::= { lockd 1 } +-- +-- lockdError OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Error Flag. > 0 indicates error" +-- ::= { lockd 100 } +-- +-- lockdErrorMsg OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Error message if something is wrong" +-- ::= { lockd 101 } + +disk OBJECT-TYPE + SYNTAX SEQUENCE OF Disk + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Disk watching information." + INDEX { diskIndex } + ::= { ucdavis 6 } + +Disk ::= SEQUENCE { + diskIndex INTEGER, + diskPath DisplayString, + diskDevice DisplayString, + diskMinimum INTEGER, + diskMinPercent INTEGER, + diskTotal INTEGER, + diskAvail INTEGER, + diskUsed INTEGER, + diskPercent INTEGER, + diskErrorFlag INTEGER, + diskErrorMsg DisplayString +} + +diskIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Reference number for the Disk Mib." + ::= { disk 1 } + +diskPath OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Path where disk is mounted." + ::= { disk 2 } + +diskDevice OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Device path" + ::= { disk 3 } + +diskMinimum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum space required on the disk." + ::= { disk 4 } + +diskMinPercent OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum percentage of space required on the disk." + ::= { disk 5 } + +diskTotal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total Disk Size (kbytes)" + ::= { disk 6 } + +diskAvail OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Available disk Space" + ::= { disk 7 } + +diskUsed OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Used Space on Disk" + ::= { disk 8 } + +diskPercent OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Percentage of space used on disk" + ::= { disk 9 } + +diskErrorFlag OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Error flag signaling disk is over minimum required space" + ::= { disk 100 } + +diskErrorMsg OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A text description of what caused the error flag to be set." + ::= { disk 101 } + +loadaves OBJECT-TYPE + SYNTAX SEQUENCE OF Loadaves + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Load average information." + INDEX { loadaveIndex } + ::= { ucdavis 7 } + + +Loadaves ::= SEQUENCE { + loadaveIndex INTEGER, + loadaveNames DisplayString, + loadaveLoad DisplayString, + loadaveConfig DisplayString, + loadaveErrorFlag INTEGER, + loadaveErrMessage DisplayString +} + +loadaveIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Reference Index for each observed loadave." + ::= { loadaves 1 } + +loadaveNames OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The list of loadave names we're Counting." + ::= { loadaves 2 } + +loadaveLoad OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The 1,5 and 10 minute load averages." + ::= { loadaves 3 } + +loadaveConfig OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The watch point for loadaverages to signal an error." + ::= { loadaves 4 } + +loadaveErrorFlag OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A Error flag to indicate trouble with a loadave. It + goes to 1 if there is an error, 0 if no error." + ::= { loadaves 100 } + +loadaveErrMessage OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An error message describing the problem (if one exists)." + ::= { loadaves 101 } + +-- the following section is commented out because it is already +-- defined in the current UCD-SNMP-MIB + +-- version OBJECT-TYPE +-- SYNTAX Version +-- ACCESS not-accessible +-- STATUS mandatory +-- DESCRIPTION +-- "ece-snmpd version info." +-- INDEX { versionIndex } +-- ::= { ucdavis 100 } +-- +-- Version ::= SEQUENCE { +-- versionIndex INTEGER, +-- versionTag DisplayString, +-- versionDate DisplayString, +-- versionCDate DisplayString, +-- versionIdent DisplayString, +-- versionClearCache INTEGER, +-- versionUpdateConfig INTEGER, +-- versionDoDebugging INTEGER +-- } +-- +-- versionIndex OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Index to mib (always 1)" +-- ::= { version 1 } +-- +-- versionTag OBJECT-TYPE +-- SYNTAX DisplayString +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "CVS tag keyword" +-- ::= { version 2 } +-- +-- versionDate OBJECT-TYPE +-- SYNTAX DisplayString +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Date string from RCS keyword" +-- ::= { version 3 } +-- +-- versionCDate OBJECT-TYPE +-- SYNTAX DisplayString +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Date string from ctime() " +-- ::= { version 4 } +-- +-- versionIdent OBJECT-TYPE +-- SYNTAX DisplayString +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Id string from RCS keyword" +-- ::= { version 5 } +-- +-- versionClearCache OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "Set to 1 to clear the exec cache, if enabled" +-- ::= { version 10 } +-- +-- versionUpdateConfig OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "Set to 1 to read-read the config file(s)." +-- ::= { version 11 } +-- +-- versionRestartAgent OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "Set to 1 to restart the agent." +-- ::= { version 12 } +-- +-- versionDoDebugging OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "Set to 1 to turn debugging statements on in the agent." +-- ::= { version 20 } +-- + +-- the following section is commented out because it is already +-- defined in the current UCD-SNMP-MIB + +-- snmperrs OBJECT-TYPE +-- SYNTAX Snmperrs +-- ACCESS not-accessible +-- STATUS mandatory +-- DESCRIPTION +-- "A place for the agent to report problems." +-- INDEX { snmperrIndex } +-- ::= { ucdavis 101 } +-- +-- +-- Snmperrs ::= SEQUENCE { +-- snmperrIndex INTEGER, +-- snmperrNames DisplayString, +-- snmperrErrorFlag INTEGER, +-- snmperrErrMessage DisplayString +-- } +-- +-- snmperrIndex OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "Reference Index for each observed snmperr." +-- ::= { snmperrs 1 } +-- +-- snmperrNames OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "snmp" +-- ::= { snmperrs 2 } +-- +-- snmperrErrorFlag OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "A Error flag to indicate trouble with the agent. It +-- goes to 1 if there is an error, 0 if no error." +-- ::= { snmperrs 100 } +-- +-- snmperrErrMessage OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "An error message describing the problem (if one exists)." +-- ::= { snmperrs 101 } +-- +END |