1 files changed, 282 insertions, 0 deletions
diff --git a/ext/pcre/pcrelib/config.h b/ext/pcre/pcrelib/config.h
new file mode 100644
index 000000000..510197fa3
--- /dev/null
+++ b/ext/pcre/pcrelib/config.h
@@ -0,0 +1,282 @@
+
+#include <php_compat.h>
+#undef PACKAGE_NAME
+#undef PACKAGE_VERSION
+#undef PACKAGE_TARNAME
+#undef PACKAGE_STRING
+
+#define SUPPORT_UCP
+#define SUPPORT_UTF8
+
+
+/* config.h.  Generated from config.h.in by configure.  */
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+
+/* On Unix-like systems config.h.in is converted by "configure" into config.h.
+Some other environments also support the use of "configure". PCRE is written in
+Standard C, but there are a few non-standard things it can cope with, allowing
+it to run on SunOS4 and other "close to standard" systems.
+
+If you are going to build PCRE "by hand" on a system without "configure" you
+should copy the distributed config.h.generic to config.h, and then set up the
+macros the way you need them. Alternatively, you can avoid editing by using -D
+on the compiler command line to set the macro values.
+
+PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if
+HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set
+them both to 0; an emulation function will be used. */
+
+/* If you are compiling for a system that uses EBCDIC instead of ASCII
+   character codes, define this macro as 1. On systems that can use
+   "configure", this can be done via --enable-ebcdic. */
+/* #undef EBCDIC */
+
+/* Define to 1 if you have the `bcopy' function. */
+#ifndef HAVE_BCOPY
+#define HAVE_BCOPY 1
+#endif
+
+/* Define to 1 if you have the <bits/type_traits.h> header file. */
+/* #undef HAVE_BITS_TYPE_TRAITS_H */
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#ifndef HAVE_DIRENT_H
+#define HAVE_DIRENT_H 1
+#endif
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#ifndef HAVE_DLFCN_H
+#define HAVE_DLFCN_H 1
+#endif
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#ifndef HAVE_INTTYPES_H
+#define HAVE_INTTYPES_H 1
+#endif
+
+/* Define to 1 if you have the <limits.h> header file. */
+#ifndef HAVE_LIMITS_H
+#define HAVE_LIMITS_H 1
+#endif
+
+/* Define to 1 if the system has the type `long long'. */
+#ifndef HAVE_LONG_LONG
+#define HAVE_LONG_LONG 1
+#endif
+
+/* Define to 1 if you have the `memmove' function. */
+#ifndef HAVE_MEMMOVE
+#define HAVE_MEMMOVE 1
+#endif
+
+/* Define to 1 if you have the <memory.h> header file. */
+#ifndef HAVE_MEMORY_H
+#define HAVE_MEMORY_H 1
+#endif
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#ifndef HAVE_STDINT_H
+#define HAVE_STDINT_H 1
+#endif
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#ifndef HAVE_STDLIB_H
+#define HAVE_STDLIB_H 1
+#endif
+
+/* Define to 1 if you have the `strerror' function. */
+#ifndef HAVE_STRERROR
+#define HAVE_STRERROR 1
+#endif
+
+/* Define to 1 if you have the <string> header file. */
+#ifndef HAVE_STRING
+#define HAVE_STRING 1
+#endif
+
+/* Define to 1 if you have the <strings.h> header file. */
+#ifndef HAVE_STRINGS_H
+#define HAVE_STRINGS_H 1
+#endif
+
+/* Define to 1 if you have the <string.h> header file. */
+#ifndef HAVE_STRING_H
+#define HAVE_STRING_H 1
+#endif
+
+/* Define to 1 if you have the `strtoll' function. */
+#ifndef HAVE_STRTOLL
+#define HAVE_STRTOLL 1
+#endif
+
+/* Define to 1 if you have the `strtoq' function. */
+#ifndef HAVE_STRTOQ
+#define HAVE_STRTOQ 1
+#endif
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#ifndef HAVE_SYS_STAT_H
+#define HAVE_SYS_STAT_H 1
+#endif
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#ifndef HAVE_SYS_TYPES_H
+#define HAVE_SYS_TYPES_H 1
+#endif
+
+/* Define to 1 if you have the <type_traits.h> header file. */
+/* #undef HAVE_TYPE_TRAITS_H */
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#ifndef HAVE_UNISTD_H
+#define HAVE_UNISTD_H 1
+#endif
+
+/* Define to 1 if the system has the type `unsigned long long'. */
+#ifndef HAVE_UNSIGNED_LONG_LONG
+#define HAVE_UNSIGNED_LONG_LONG 1
+#endif
+
+/* Define to 1 if you have the <windows.h> header file. */
+/* #undef HAVE_WINDOWS_H */
+
+/* The value of LINK_SIZE determines the number of bytes used to store links
+   as offsets within the compiled regex. The default is 2, which allows for
+   compiled patterns up to 64K long. This covers the vast majority of cases.
+   However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows
+   for longer patterns in extreme cases. On systems that support it,
+   "configure" can be used to override this default. */
+#ifndef LINK_SIZE
+#define LINK_SIZE 2
+#endif
+
+/* The value of MATCH_LIMIT determines the default number of times the
+   internal match() function can be called during a single execution of
+   pcre_exec(). There is a runtime interface for setting a different limit.
+   The limit exists in order to catch runaway regular expressions that take
+   for ever to determine that they do not match. The default is set very large
+   so that it does not accidentally catch legitimate cases. On systems that
+   support it, "configure" can be used to override this default default. */
+#ifndef MATCH_LIMIT
+#define MATCH_LIMIT 10000000
+#endif
+
+/* The above limit applies to all calls of match(), whether or not they
+   increase the recursion depth. In some environments it is desirable to limit
+   the depth of recursive calls of match() more strictly, in order to restrict
+   the maximum amount of stack (or heap, if NO_RECURSE is defined) that is
+   used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of
+   match(). To have any useful effect, it must be less than the value of
+   MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is
+   a runtime method for setting a different limit. On systems that support it,
+   "configure" can be used to override the default. */
+#ifndef MATCH_LIMIT_RECURSION
+#define MATCH_LIMIT_RECURSION MATCH_LIMIT
+#endif
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+   Care must be taken if it is increased, because it guards against integer
+   overflow caused by enormously large patterns. */
+#ifndef MAX_DUPLENGTH
+#define MAX_DUPLENGTH 30000
+#endif
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+   Care must be taken if it is increased, because it guards against integer
+   overflow caused by enormously large patterns. */
+#ifndef MAX_NAME_COUNT
+#define MAX_NAME_COUNT 10000
+#endif
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+   Care must be taken if it is increased, because it guards against integer
+   overflow caused by enormously large patterns. */
+#ifndef MAX_NAME_SIZE
+#define MAX_NAME_SIZE 32
+#endif
+
+/* The value of NEWLINE determines the newline character sequence. On
+   Unix-like systems, "configure" can be used to override the default, which
+   is 10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or
+   -2 (ANYCRLF). */
+#ifndef NEWLINE
+#define NEWLINE 10
+#endif
+
+/* PCRE uses recursive function calls to handle backtracking while matching.
+   This can sometimes be a problem on systems that have stacks of limited
+   size. Define NO_RECURSE to get a version that doesn't use recursion in the
+   match() function; instead it creates its own stack by steam using
+   pcre_recurse_malloc() to obtain memory from the heap. For more detail, see
+   the comments and other stuff just above the match() function. On systems
+   that support it, "configure" can be used to set this in the Makefile (use
+   --disable-stack-for-recursion). */
+/* #undef NO_RECURSE */
+
+/* Name of package */
+#define PACKAGE "pcre"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT ""
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "PCRE"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "PCRE 7.2"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "pcre"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "7.2"
+
+
+/* If you are compiling for a system other than a Unix-like system or
+   Win32, and it needs some magic to be inserted before the definition
+   of a function that is exported by the library, define this macro to
+   contain the relevant magic. If you do not define this macro, it
+   defaults to "extern" for a C compiler and "extern C" for a C++
+   compiler on non-Win32 systems. This macro apears at the start of
+   every exported function that is part of the external API. It does
+   not appear on functions that are "external" in the C sense, but
+   which are internal to the library. */
+/* #undef PCRE_EXP_DEFN */
+
+/* Define if linking statically (TODO: make nice with Libtool) */
+/* #undef PCRE_STATIC */
+
+/* When calling PCRE via the POSIX interface, additional working storage is
+   required for holding the pointers to capturing substrings because PCRE
+   requires three integers per substring, whereas the POSIX interface provides
+   only two. If the number of expected substrings is small, the wrapper
+   function uses space on the stack, because this is faster than using
+   malloc() for each call. The threshold above which the stack is no longer
+   used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it,
+   "configure" can be used to override this default. */
+#ifndef POSIX_MALLOC_THRESHOLD
+#define POSIX_MALLOC_THRESHOLD 10
+#endif
+
+/* Define to 1 if you have the ANSI C header files. */
+#ifndef STDC_HEADERS
+#define STDC_HEADERS 1
+#endif
+
+/* Define to enable support for Unicode properties */
+/* #undef SUPPORT_UCP */
+
+/* Define to enable support for the UTF-8 Unicode encoding. */
+/* #undef SUPPORT_UTF8 */
+
+/* Version number of package */
+#ifndef VERSION
+#define VERSION "7.2"
+#endif
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+/* #undef size_t */