| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Without this patch Ruby 1.9 is still complaining loudly about trying to
parse the spec files. The previous attempt to clean up this problem in
edc3ddf works for Ruby 1.8 but not 1.9.
I'd prefer to remove the shebang lines entirely, but doing so will cause
encoding errors in Ruby 1.9. This patch strives for a happy middle
ground of convincing Ruby it is actually working with Ruby while not
confusing it to think it should exec() to rspec.
This patch is the result of the following command run against the source
tree:
find spec -type f -print0 | \
xargs -0 perl -pl -i -e 's,^\#\!\s?/(.*)rspec,\#! /usr/bin/env ruby,'
|
|
Many tests set stubs or expectations on configuration values. This is
unnecessary, as settings are reset before each test. Because creating a stub
stubs out the entire value method on settings, stubbing any individual setting
interferes with retrieving any other setting. This makes for weird errors and
fragile tests. This commit changes most cases to just set each setting
directly.
Expectations on settings were often used to verify that a setting is used.
This is not a good way of testing this, since it checks that the value is
accessed but not that it is actually used correctly. Most expecations on
settings are better expressed by changing the setting and then verifying a
returned value.
|
|
Without this patch some spec files are using `ruby -S rspec` and others
are using `rspec`.
We should standardize on a single form of the interpreter used for spec
files.
`ruby -S rspec` is the best choice because it correctly informs editors
such as Vim with Syntastic that the file is a Ruby file rather than an
Rspec file.
|
|
We now use a shebang of: #!/usr/bin/env rspec
This enables the direct execution of spec tests again, which was lost earlier
during the transition to more directly using the rspec2 runtime environment.
|
|
rspec2 automatically sets a bunch of load-path stuff we were by hand, so we
can just stop. As a side-effect we can now avoid a whole pile of stupid things
to try and include the spec_helper.rb file...
...and then we can stop protecting spec_helper from evaluating twice, since we
now require it with a consistent name. Yay.
Reviewed-By: Pieter van de Bruggen <pieter@puppetlabs.com>
|
|
Running the specs under Ruby 1.9 didn't work using the lambda to recurse
down directories to find the spec_helper. Standardizing the way to find
spec_helper like the rest of specs seemed like the way to go.
Here's the command line perl I used to make the change:
perl -p -i -e "s/Dir.chdir.*lambda.*spec_helper.*$/require
File.expand_path(File.dirname(__FILE__) + '\/..\/..\/spec_helper')/"
`find spec -name "*_spec.rb"`
Then I fixed the number of dots for files that weren't two levels from
the spec dir and whose tests failed.
Reviewed-by: Nick Lewis <nick@puppetlabs.com>
|
|
Replaced 106806 occurances of ^( +)(.*$) with
The ruby community almost universally (i.e. everyone but Luke, Markus, and the other eleven people
who learned ruby in the 1900s) uses two-space indentation.
3 Examples:
The code:
end
# Tell getopt which arguments are valid
def test_get_getopt_args
element = Setting.new :name => "foo", :desc => "anything", :settings => Puppet::Util::Settings.new
assert_equal([["--foo", GetoptLong::REQUIRED_ARGUMENT]], element.getopt_args, "Did not produce appropriate getopt args")
becomes:
end
# Tell getopt which arguments are valid
def test_get_getopt_args
element = Setting.new :name => "foo", :desc => "anything", :settings => Puppet::Util::Settings.new
assert_equal([["--foo", GetoptLong::REQUIRED_ARGUMENT]], element.getopt_args, "Did not produce appropriate getopt args")
The code:
assert_equal(str, val)
assert_instance_of(Float, result)
end
# Now test it with a passed object
becomes:
assert_equal(str, val)
assert_instance_of(Float, result)
end
# Now test it with a passed object
The code:
end
assert_nothing_raised do
klass[:Yay] = "boo"
klass["Cool"] = :yayness
end
becomes:
end
assert_nothing_raised do
klass[:Yay] = "boo"
klass["Cool"] = :yayness
end
|
|
* Replaced 83 occurances of
(.*)" *[+] *([$@]?[\w_0-9.:]+?)(.to_s\b)?(?! *[*(%\w_0-9.:{\[])
with
\1#{\2}"
3 Examples:
The code:
puts "PUPPET " + status + ": " + process + ", " + state
becomes:
puts "PUPPET " + status + ": " + process + ", #{state}"
The code:
puts "PUPPET " + status + ": #{process}" + ", #{state}"
becomes:
puts "PUPPET #{status}" + ": #{process}" + ", #{state}"
The code:
}.compact.join( "\n" ) + "\n" + t + "]\n"
becomes:
}.compact.join( "\n" ) + "\n#{t}" + "]\n"
* Replaced 21 occurances of (.*)" *[+] *" with \1
3 Examples:
The code:
puts "PUPPET #{status}" + ": #{process}" + ", #{state}"
becomes:
puts "PUPPET #{status}" + ": #{process}, #{state}"
The code:
puts "PUPPET #{status}" + ": #{process}, #{state}"
becomes:
puts "PUPPET #{status}: #{process}, #{state}"
The code:
res = self.class.name + ": #{@name}" + "\n"
becomes:
res = self.class.name + ": #{@name}\n"
* Don't use string concatenation to split lines unless they would be very long.
Replaced 11 occurances of
(.*)(['"]) *[+]
*(['"])(.*)
with
3 Examples:
The code:
o.define_head "The check_puppet Nagios plug-in checks that specified " +
"Puppet process is running and the state file is no " +
becomes:
o.define_head "The check_puppet Nagios plug-in checks that specified Puppet process is running and the state file is no " +
The code:
o.separator "Mandatory arguments to long options are mandatory for " +
"short options too."
becomes:
o.separator "Mandatory arguments to long options are mandatory for short options too."
The code:
o.define_head "The check_puppet Nagios plug-in checks that specified Puppet process is running and the state file is no " +
"older than specified interval."
becomes:
o.define_head "The check_puppet Nagios plug-in checks that specified Puppet process is running and the state file is no older than specified interval."
* Replaced no occurances of do (.*?) end with {\1}
* Replaced 1488 occurances of
"([^"\n]*%s[^"\n]*)" *% *(.+?)(?=$| *\b(do|if|while|until|unless|#)\b)
with
20 Examples:
The code:
args[0].split(/\./).map do |s| "dc=%s"%[s] end.join(",")
becomes:
args[0].split(/\./).map do |s| "dc=#{s}" end.join(",")
The code:
puts "%s" % Puppet.version
becomes:
puts "#{Puppet.version}"
The code:
raise "Could not find information for %s" % node
becomes:
raise "Could not find information for #{node}"
The code:
raise Puppet::Error, "Cannot create %s: basedir %s is a file" % [dir, File.join(path)]
becomes:
raise Puppet::Error, "Cannot create #{dir}: basedir #{File.join(path)} is a file"
The code:
Puppet.err "Could not run %s: %s" % [client_class, detail]
becomes:
Puppet.err "Could not run #{client_class}: #{detail}"
The code:
raise "Could not find handler for %s" % arg
becomes:
raise "Could not find handler for #{arg}"
The code:
Puppet.err "Will not start without authorization file %s" % Puppet[:authconfig]
becomes:
Puppet.err "Will not start without authorization file #{Puppet[:authconfig]}"
The code:
raise Puppet::Error, "Could not deserialize catalog from pson: %s" % detail
becomes:
raise Puppet::Error, "Could not deserialize catalog from pson: #{detail}"
The code:
raise "Could not find facts for %s" % Puppet[:certname]
becomes:
raise "Could not find facts for #{Puppet[:certname]}"
The code:
raise ArgumentError, "%s is not readable" % path
becomes:
raise ArgumentError, "#{path} is not readable"
The code:
raise ArgumentError, "Invalid handler %s" % name
becomes:
raise ArgumentError, "Invalid handler #{name}"
The code:
debug "Executing '%s' in zone %s with '%s'" % [command, @resource[:name], str]
becomes:
debug "Executing '#{command}' in zone #{@resource[:name]} with '#{str}'"
The code:
raise Puppet::Error, "unknown cert type '%s'" % hash[:type]
becomes:
raise Puppet::Error, "unknown cert type '#{hash[:type]}'"
The code:
Puppet.info "Creating a new certificate request for %s" % Puppet[:certname]
becomes:
Puppet.info "Creating a new certificate request for #{Puppet[:certname]}"
The code:
"Cannot create alias %s: object already exists" % [name]
becomes:
"Cannot create alias #{name}: object already exists"
The code:
return "replacing from source %s with contents %s" % [metadata.source, metadata.checksum]
becomes:
return "replacing from source #{metadata.source} with contents #{metadata.checksum}"
The code:
it "should have a %s parameter" % param do
becomes:
it "should have a #{param} parameter" do
The code:
describe "when registring '%s' messages" % log do
becomes:
describe "when registring '#{log}' messages" do
The code:
paths = %w{a b c d e f g h}.collect { |l| "/tmp/iteration%stest" % l }
becomes:
paths = %w{a b c d e f g h}.collect { |l| "/tmp/iteration#{l}test" }
The code:
assert_raise(Puppet::Error, "Check '%s' did not fail on false" % check) do
becomes:
assert_raise(Puppet::Error, "Check '#{check}' did not fail on false") do
|
|
Part 2 re-did the change on the spec files, which it shouldn't have.
|
|
Some spec files like active_record.rb had names that would confuse the
load path and get loaded instead of the intended implentation when the
spec was run from the same directory as the file.
Author: Matt Robinson <matt@puppetlabs.com>
Date: Fri Jun 11 15:29:33 2010 -0700
|
|
Some spec files like active_record.rb had names that would confuse the
load path and get loaded instead of the intended implentation when the
spec was run from the same directory as the file.
Author: Matt Robinson <matt@puppetlabs.com>
Date: Fri Jun 11 15:29:33 2010 -0700
|
