diff options
Diffstat (limited to 'configure')
-rwxr-xr-x | configure | 1349 |
1 files changed, 610 insertions, 739 deletions
@@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.66 for rsyslog 5.8.3. +# Generated by GNU Autoconf 2.67 for rsyslog 5.8.4. # # Report bugs to <rsyslog@lists.adiscon.com>. # @@ -173,15 +173,7 @@ test x\$exitcode = x0 || exit 1" as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" +test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else @@ -536,8 +528,155 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +$* +_LT_EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi + + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + test -n "$DJDIR" || exec 7<&0 </dev/null exec 6>&1 @@ -562,8 +701,8 @@ MAKEFLAGS= # Identity of this package. PACKAGE_NAME='rsyslog' PACKAGE_TARNAME='rsyslog' -PACKAGE_VERSION='5.8.3' -PACKAGE_STRING='rsyslog 5.8.3' +PACKAGE_VERSION='5.8.4' +PACKAGE_STRING='rsyslog 5.8.4' PACKAGE_BUGREPORT='rsyslog@lists.adiscon.com' PACKAGE_URL='' @@ -745,6 +884,7 @@ OTOOL LIPO NMEDIT DSYMUTIL +lt_ECHO RANLIB AR OBJDUMP @@ -996,8 +1136,9 @@ do fi case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -1475,7 +1616,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures rsyslog 5.8.3 to adapt to many kinds of systems. +\`configure' configures rsyslog 5.8.4 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1545,7 +1686,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of rsyslog 5.8.3:";; + short | recursive ) echo "Configuration of rsyslog 5.8.4:";; esac cat <<\_ACEOF @@ -1720,8 +1861,8 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -rsyslog configure 5.8.3 -generated by GNU Autoconf 2.66 +rsyslog configure 5.8.4 +generated by GNU Autoconf 2.67 Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation @@ -1793,7 +1934,7 @@ $as_echo "$ac_try_echo"; } >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } >/dev/null && { + test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : @@ -1856,7 +1997,7 @@ if ac_fn_c_try_cpp "$LINENO"; then : else ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } @@ -2299,8 +2440,8 @@ cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by rsyslog $as_me 5.8.3, which was -generated by GNU Autoconf 2.66. Invocation command line was +It was created by rsyslog $as_me 5.8.4, which was +generated by GNU Autoconf 2.67. Invocation command line was $ $0 $@ @@ -2558,7 +2699,7 @@ $as_echo "$as_me: loading site script $ac_site_file" >&6;} || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi done @@ -2782,11 +2923,11 @@ am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;; esac # Do `set' in a subshell so we don't clobber the current shell's @@ -3114,7 +3255,7 @@ fi # Define the identity of the package. PACKAGE='rsyslog' - VERSION='5.8.3' + VERSION='5.8.4' cat >>confdefs.h <<_ACEOF @@ -3536,7 +3677,7 @@ fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 @@ -3651,7 +3792,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } @@ -3694,7 +3835,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 @@ -3753,7 +3894,7 @@ $as_echo "$ac_try_echo"; } >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi fi fi @@ -3805,7 +3946,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi @@ -4195,7 +4336,7 @@ else # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. @@ -4211,11 +4352,11 @@ else ac_preproc_ok=: break fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext +rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi @@ -4254,7 +4395,7 @@ else # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. @@ -4270,18 +4411,18 @@ else ac_preproc_ok=: break fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext +rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi ac_ext=c @@ -5005,7 +5146,7 @@ fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 @@ -5539,8 +5680,8 @@ esac -macro_version='2.2.10' -macro_revision='1.3175' +macro_version='2.2.6b' +macro_revision='1.3017' @@ -5578,7 +5719,7 @@ fi $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -5611,7 +5752,7 @@ fi $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -5627,75 +5768,6 @@ IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`print -r -- -n 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if test "${ac_cv_path_SED+set}" = set; then : @@ -6031,11 +6103,8 @@ if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" + if test -n "$ac_tool_prefix"; then + for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 @@ -6079,7 +6148,7 @@ fi fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" + for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 @@ -6134,15 +6203,6 @@ esac fi fi - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" @@ -6162,13 +6222,13 @@ if test "${lt_cv_nm_interface+set}" = set; then : else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval echo "\"\$as_me:6225: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval echo "\"\$as_me:6228: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) + (eval echo "\"\$as_me:6231: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" @@ -6225,11 +6285,6 @@ else lt_cv_sys_max_cmd_len=8192; ;; - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. @@ -6294,8 +6349,8 @@ else # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && + while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` @@ -6566,18 +6621,16 @@ mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; -cegcc*) +cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' @@ -6607,10 +6660,6 @@ gnu*) lt_cv_deplibs_check_method=pass_all ;; -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in @@ -6619,11 +6668,11 @@ hpux10.20* | hpux11*) lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac @@ -6649,7 +6698,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else @@ -7061,18 +7110,6 @@ if test -n "$RANLIB"; then old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - @@ -7242,8 +7279,8 @@ _LT_EOF test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then @@ -7396,7 +7433,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext + echo '#line 7436 "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -8108,38 +8145,6 @@ rm -f core conftest.err conftest.$ac_objext \ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if test "${lt_cv_ld_force_load+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; @@ -8167,7 +8172,7 @@ $as_echo "$lt_cv_ld_force_load" >&6; } else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test "$DSYMUTIL" != ":"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -8190,8 +8195,6 @@ done - - # Set options @@ -8314,7 +8317,6 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool' - test -z "$LN_S" && LN_S="ln -s" @@ -8364,6 +8366,19 @@ _ACEOF + + + + + + + + + + + + + case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some @@ -8376,6 +8391,23 @@ aix3*) ;; esac +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + # Global variables: ofile=libtool can_build_shared=yes @@ -8404,7 +8436,7 @@ for cc_temp in $compiler""; do *) break;; esac done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it @@ -8613,12 +8645,7 @@ if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac + lt_prog_compiler_no_builtin_flag=' -fno-builtin' { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } @@ -8638,15 +8665,15 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8668: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:8672: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes @@ -8724,12 +8751,6 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } lt_prog_compiler_pic='-fno-common' ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag @@ -8772,13 +8793,6 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } lt_prog_compiler_pic='-fPIC' ;; esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - lt_prog_compiler_pic='-Xcompiler -fPIC' - ;; - esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in @@ -8841,7 +8855,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' @@ -8853,26 +8867,26 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; esac ;; esac @@ -8903,7 +8917,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + f77* | f90* | f95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; @@ -8990,15 +9004,15 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9007: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:9011: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes @@ -9046,7 +9060,7 @@ else if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes @@ -9095,16 +9109,16 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9112: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:9116: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes @@ -9150,16 +9164,16 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9167: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:9171: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes @@ -9269,36 +9283,13 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie openbsd*) with_gnu_ld=no ;; + linux* | k*bsd*-gnu) + link_all_deplibs=no + ;; esac ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' @@ -9332,12 +9323,11 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie ld_shlibs=no cat <<_LT_EOF 1>&2 -*** Warning: the GNU linker, at least up to release 2.19, is reported +*** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. _LT_EOF fi @@ -9373,7 +9363,6 @@ _LT_EOF # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes @@ -9395,11 +9384,6 @@ _LT_EOF fi ;; - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no @@ -9429,12 +9413,11 @@ _LT_EOF tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -9445,17 +9428,13 @@ _LT_EOF lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 @@ -9471,17 +9450,17 @@ _LT_EOF fi case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) + xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld='-rpath $libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -9490,7 +9469,7 @@ _LT_EOF fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= @@ -9602,10 +9581,8 @@ _LT_EOF else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi @@ -9667,6 +9644,7 @@ _LT_EOF if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi + link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then @@ -9723,7 +9701,7 @@ rm -f core conftest.err conftest.$ac_objext \ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' @@ -9767,13 +9745,8 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' @@ -9812,7 +9785,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. @@ -9828,11 +9801,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec='' - fi + whole_archive_flag_spec='' link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in @@ -9840,7 +9809,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" @@ -9906,7 +9875,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' @@ -9925,7 +9894,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' @@ -9946,46 +9915,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if test "${lt_cv_prog_compiler__b+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi @@ -10013,7 +9943,7 @@ fi irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. @@ -10024,15 +9954,15 @@ fi int foo(void) {} _ACEOF if ac_fn_c_try_link "$LINENO"; then : - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' @@ -10041,7 +9971,7 @@ rm -f core conftest.err conftest.$ac_objext \ link_all_deplibs=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -10094,17 +10024,17 @@ rm -f core conftest.err conftest.$ac_objext \ hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' @@ -10114,13 +10044,13 @@ rm -f core conftest.err conftest.$ac_objext \ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -10323,50 +10253,44 @@ x|xyes) # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if test "${lt_cv_archive_cmds_need_lc+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 +$as_echo "$archive_cmds_need_lc" >&6; } ;; esac fi @@ -10537,23 +10461,16 @@ if test "$GCC" = yes; then darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= @@ -10566,7 +10483,7 @@ if test "$GCC" = yes; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; @@ -10586,13 +10503,7 @@ BEGIN {RS=" "; FS="/|\n";} { if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi @@ -10680,7 +10591,7 @@ amigaos*) m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; @@ -10733,12 +10644,23 @@ cygwin* | mingw* | pw32* | cegcc*) cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' @@ -10838,19 +10760,6 @@ gnu*) hardcode_into_libs=yes ;; -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -10893,10 +10802,8 @@ hpux9* | hpux10* | hpux11*) soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 ;; interix[3-9]*) @@ -10963,17 +10870,12 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu) finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -10986,31 +10888,23 @@ main () _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -11022,6 +10916,18 @@ fi dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -11312,11 +11218,6 @@ fi - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= @@ -11647,7 +11548,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" +#line 11551 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11688,13 +11589,7 @@ else # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -void fnord () __attribute__((visibility("default"))); -#endif - -void fnord () { int i=42; } +void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -11703,11 +11598,7 @@ int main () if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else @@ -11753,7 +11644,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" +#line 11647 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11794,13 +11685,7 @@ else # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -void fnord () __attribute__((visibility("default"))); -#endif - -void fnord () { int i=42; } +void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -11809,11 +11694,7 @@ int main () if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else @@ -14103,7 +13984,7 @@ if test "${enable_regexp+set}" = set; then : enableval=$enable_regexp; case "${enableval}" in yes) enable_regexp="yes" ;; no) enable_regexp="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-regexp" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-regexp" "$LINENO" 5 ;; esac else enable_regexp=yes @@ -14132,7 +14013,7 @@ if test "${enable_zlib+set}" = set; then : enableval=$enable_zlib; case "${enableval}" in yes) enable_zlib="yes" ;; no) enable_zlib="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-zlib" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-zlib" "$LINENO" 5 ;; esac else enable_zlib=yes @@ -14213,7 +14094,7 @@ if test "${enable_gssapi_krb5+set}" = set; then : enableval=$enable_gssapi_krb5; case "${enableval}" in yes) enable_gssapi_krb5="yes" ;; no) enable_gssapi_krb5="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-gssapi-krb5" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-gssapi-krb5" "$LINENO" 5 ;; esac else enable_gssapi_krb5=no @@ -14291,7 +14172,7 @@ if test "${enable_pthreads+set}" = set; then : enableval=$enable_pthreads; case "${enableval}" in yes) enable_pthreads="yes" ;; no) enable_pthreads="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-pthreads" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-pthreads" "$LINENO" 5 ;; esac else enable_pthreads=yes @@ -14300,7 +14181,7 @@ fi if test "x$enable_pthreads" = "xno"; then - as_fn_error $? "rsyslog v3+ does no longer support single threading mode -- use a previous version for that" "$LINENO" 5; + as_fn_error $? "rsyslog v3+ does no longer support single threading mode -- use a previous version for that" "$LINENO" 5 ; fi if test "x$enable_pthreads" != "xno"; then @@ -14366,7 +14247,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "pthread is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi @@ -14374,7 +14255,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "pthread is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi @@ -14503,7 +14384,7 @@ if test "${enable_klog+set}" = set; then : enableval=$enable_klog; case "${enableval}" in yes) enable_klog="yes" ;; no) enable_klog="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-klog" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-klog" "$LINENO" 5 ;; esac else enable_klog="yes" @@ -14582,7 +14463,7 @@ if test "${enable_inet+set}" = set; then : enableval=$enable_inet; case "${enableval}" in yes) enable_inet="yes" ;; no) enable_inet="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-inet" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-inet" "$LINENO" 5 ;; esac else enable_inet="yes" @@ -14643,7 +14524,7 @@ if test "${enable_unlimited_select+set}" = set; then : enableval=$enable_unlimited_select; case "${enableval}" in yes) enable_unlimited_select="yes" ;; no) enable_unlimited_select="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-unlimited-select" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-unlimited-select" "$LINENO" 5 ;; esac else enable_unlimited_select="no" @@ -14686,7 +14567,7 @@ if test "${enable_debug+set}" = set; then : enableval=$enable_debug; case "${enableval}" in yes) enable_debug="yes" ;; no) enable_debug="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-debug" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-debug" "$LINENO" 5 ;; esac else enable_debug="no" @@ -14711,7 +14592,7 @@ if test "${enable_rtinst+set}" = set; then : enableval=$enable_rtinst; case "${enableval}" in yes) enable_rtinst="yes" ;; no) enable_rtinst="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-rtinst" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-rtinst" "$LINENO" 5 ;; esac else enable_rtinst="no" @@ -14731,7 +14612,7 @@ if test "${enable_valgrind+set}" = set; then : enableval=$enable_valgrind; case "${enableval}" in yes) enable_valgrind="yes" ;; no) enable_valgrind="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-valgrind" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-valgrind" "$LINENO" 5 ;; esac else enable_valgrind="no" @@ -14751,7 +14632,7 @@ if test "${enable_memcheck+set}" = set; then : enableval=$enable_memcheck; case "${enableval}" in yes) enable_memcheck="yes" ;; no) enable_memcheck="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-memcheck" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-memcheck" "$LINENO" 5 ;; esac else enable_memcheck="no" @@ -14771,7 +14652,7 @@ if test "${enable_diagtools+set}" = set; then : enableval=$enable_diagtools; case "${enableval}" in yes) enable_diagtools="yes" ;; no) enable_diagtools="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-diagtools" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-diagtools" "$LINENO" 5 ;; esac else enable_diagtools=no @@ -14795,7 +14676,7 @@ if test "${enable_mysql+set}" = set; then : enableval=$enable_mysql; case "${enableval}" in yes) enable_mysql="yes" ;; no) enable_mysql="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-mysql" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-mysql" "$LINENO" 5 ;; esac else enable_mysql=no @@ -14844,7 +14725,7 @@ fi { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "mysql_config not found in PATH - usually a package named mysql-dev, libmysql-dev or similar, is missing - install it to fix this issue -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mysql_init in -lmysqlclient" >&5 $as_echo_n "checking for mysql_init in -lmysqlclient... " >&6; } @@ -14891,7 +14772,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "MySQL library is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi fi @@ -14913,7 +14794,7 @@ if test "${enable_pgsql+set}" = set; then : enableval=$enable_pgsql; case "${enableval}" in yes) enable_pgsql="yes" ;; no) enable_pgsql="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-pgsql" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-pgsql" "$LINENO" 5 ;; esac else enable_pgsql=no @@ -14962,7 +14843,7 @@ fi { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "pg_config not found in PATH -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PQconnectdb in -lpq" >&5 $as_echo_n "checking for PQconnectdb in -lpq... " >&6; } @@ -15009,7 +14890,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "PgSQL library is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi fi @@ -15031,7 +14912,7 @@ if test "${enable_oracle+set}" = set; then : enableval=$enable_oracle; case "${enableval}" in yes) enable_oracle="yes" ;; no) enable_oracle="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-oracle" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-oracle" "$LINENO" 5 ;; esac else enable_oracle=no @@ -15085,7 +14966,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "Oracle (OCI) library is missing: wrong oracle home -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi elif test -d "$ORACLE_LIB_PATH" -a -d "$ORACLE_INCLUDE_PATH" @@ -15134,7 +15015,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "Oracle (OCI) library is missing: wrong oracle directories -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi else @@ -15179,7 +15060,7 @@ fi { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "oracle-instantclient-config not found in PATH -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCIEnvCreate in -locci" >&5 $as_echo_n "checking for OCIEnvCreate in -locci... " >&6; } @@ -15226,7 +15107,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "Oracle (OCI) libraray is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi fi @@ -15249,7 +15130,7 @@ if test "${enable_libdbi+set}" = set; then : enableval=$enable_libdbi; case "${enableval}" in yes) enable_libdbi="yes" ;; no) enable_libdbi="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-libdbi" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-libdbi" "$LINENO" 5 ;; esac else enable_libdbi=no @@ -15269,7 +15150,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "libdbi is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi @@ -15319,7 +15200,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "libdbi library is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi @@ -15385,7 +15266,7 @@ if test "${enable_snmp+set}" = set; then : enableval=$enable_snmp; case "${enableval}" in yes) enable_snmp="yes" ;; no) enable_snmp="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-snmp" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-snmp" "$LINENO" 5 ;; esac else enable_snmp=no @@ -15405,7 +15286,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "Net-SNMP is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi @@ -15455,7 +15336,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "Net-SNMP library is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi @@ -15478,7 +15359,7 @@ if test "${enable_gnutls+set}" = set; then : enableval=$enable_gnutls; case "${enableval}" in yes) enable_gnutls="yes" ;; no) enable_gnutls="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-gnutls" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-gnutls" "$LINENO" 5 ;; esac else enable_gnutls=no @@ -15553,7 +15434,6 @@ installed software in a non-standard prefix. Alternatively, you may set the environment variables GNUTLS_CFLAGS and GNUTLS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 - elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } @@ -15568,8 +15448,7 @@ and GNUTLS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - +See \`config.log' for more details" "$LINENO" 5 ; } else GNUTLS_CFLAGS=$pkg_cv_GNUTLS_CFLAGS GNUTLS_LIBS=$pkg_cv_GNUTLS_LIBS @@ -15596,7 +15475,7 @@ if test "${enable_rsyslogrt+set}" = set; then : enableval=$enable_rsyslogrt; case "${enableval}" in yes) enable_rsyslogrt="yes" ;; no) enable_rsyslogrt="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-rsyslogrt" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-rsyslogrt" "$LINENO" 5 ;; esac else enable_rsyslogrt=yes @@ -15625,7 +15504,7 @@ if test "${enable_rsyslogd+set}" = set; then : enableval=$enable_rsyslogd; case "${enableval}" in yes) enable_rsyslogd="yes" ;; no) enable_rsyslogd="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-rsyslogd" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-rsyslogd" "$LINENO" 5 ;; esac else enable_rsyslogd=yes @@ -15652,7 +15531,7 @@ if test "${enable_extended_tests+set}" = set; then : enableval=$enable_extended_tests; case "${enableval}" in yes) enable_rsyslogd="yes" ;; no) enable_rsyslogd="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-extended-tests" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-extended-tests" "$LINENO" 5 ;; esac else enable_extended_tests=no @@ -15679,7 +15558,7 @@ if test "${enable_mysql_tests+set}" = set; then : enableval=$enable_mysql_tests; case "${enableval}" in yes) enable_mysql_tests="yes" ;; no) enable_mysql_tests="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-mysql-tests" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-mysql-tests" "$LINENO" 5 ;; esac else enable_mysql_tests=no @@ -15702,7 +15581,7 @@ if test "${enable_mail+set}" = set; then : enableval=$enable_mail; case "${enableval}" in yes) enable_mail="yes" ;; no) enable_mail="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-mail" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-mail" "$LINENO" 5 ;; esac else enable_mail=no @@ -15729,7 +15608,7 @@ if test "${enable_imdiag+set}" = set; then : enableval=$enable_imdiag; case "${enableval}" in yes) enable_imdiag="yes" ;; no) enable_imdiag="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-imdiag" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-imdiag" "$LINENO" 5 ;; esac else enable_imdiag=no @@ -15752,7 +15631,7 @@ if test "${enable_relp+set}" = set; then : enableval=$enable_relp; case "${enableval}" in yes) enable_relp="yes" ;; no) enable_relp="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-relp" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-relp" "$LINENO" 5 ;; esac else enable_relp=no @@ -15827,7 +15706,6 @@ installed software in a non-standard prefix. Alternatively, you may set the environment variables RELP_CFLAGS and RELP_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 - elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } @@ -15842,8 +15720,7 @@ and RELP_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - +See \`config.log' for more details" "$LINENO" 5 ; } else RELP_CFLAGS=$pkg_cv_RELP_CFLAGS RELP_LIBS=$pkg_cv_RELP_LIBS @@ -15870,7 +15747,7 @@ if test "${enable_rfc3195+set}" = set; then : enableval=$enable_rfc3195; case "${enableval}" in yes) enable_rfc3195="yes" ;; no) enable_rfc3195="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-rfc3195" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-rfc3195" "$LINENO" 5 ;; esac else enable_rfc3195=no @@ -15945,7 +15822,6 @@ installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBLOGGING_CFLAGS and LIBLOGGING_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 - elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } @@ -15960,8 +15836,7 @@ and LIBLOGGING_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - +See \`config.log' for more details" "$LINENO" 5 ; } else LIBLOGGING_CFLAGS=$pkg_cv_LIBLOGGING_CFLAGS LIBLOGGING_LIBS=$pkg_cv_LIBLOGGING_LIBS @@ -15989,7 +15864,7 @@ if test "${enable_testbench+set}" = set; then : enableval=$enable_testbench; case "${enableval}" in yes) enable_testbench="yes" ;; no) enable_testbench="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-testbench" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-testbench" "$LINENO" 5 ;; esac else enable_testbench=yes @@ -16012,7 +15887,7 @@ if test "${enable_imfile+set}" = set; then : enableval=$enable_imfile; case "${enableval}" in yes) enable_imfile="yes" ;; no) enable_imfile="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-imfile" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-imfile" "$LINENO" 5 ;; esac else enable_imfile=no @@ -16035,7 +15910,7 @@ if test "${enable_imsolaris+set}" = set; then : enableval=$enable_imsolaris; case "${enableval}" in yes) enable_imsolaris="yes" ;; no) enable_imsolaris="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-imsolaris" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-imsolaris" "$LINENO" 5 ;; esac else enable_imsolaris=no @@ -16057,7 +15932,7 @@ if test "${enable_imptcp+set}" = set; then : enableval=$enable_imptcp; case "${enableval}" in yes) enable_imptcp="yes" ;; no) enable_imptcp="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-imptcp" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-imptcp" "$LINENO" 5 ;; esac else enable_imptcp=no @@ -16080,7 +15955,7 @@ if test "${enable_impstats+set}" = set; then : enableval=$enable_impstats; case "${enableval}" in yes) enable_impstats="yes" ;; no) enable_impstats="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-impstats" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-impstats" "$LINENO" 5 ;; esac else enable_impstats=no @@ -16103,7 +15978,7 @@ if test "${enable_omprog+set}" = set; then : enableval=$enable_omprog; case "${enableval}" in yes) enable_omprog="yes" ;; no) enable_omprog="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-omprog" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-omprog" "$LINENO" 5 ;; esac else enable_omprog=no @@ -16126,7 +16001,7 @@ if test "${enable_omudpspoof+set}" = set; then : enableval=$enable_omudpspoof; case "${enableval}" in yes) enable_omudpspoof="yes" ;; no) enable_omudpspoof="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-omudpspoof" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-omudpspoof" "$LINENO" 5 ;; esac else enable_omudpspoof=no @@ -16147,7 +16022,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "libnet is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi @@ -16197,7 +16072,7 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "libnet is missing -See \`config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi @@ -16220,7 +16095,7 @@ if test "${enable_omstdout+set}" = set; then : enableval=$enable_omstdout; case "${enableval}" in yes) enable_omstdout="yes" ;; no) enable_omstdout="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-omstdout" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-omstdout" "$LINENO" 5 ;; esac else enable_omstdout=no @@ -16243,7 +16118,7 @@ if test "${enable_pmlastmsg+set}" = set; then : enableval=$enable_pmlastmsg; case "${enableval}" in yes) enable_pmlastmsg="yes" ;; no) enable_pmlastmsg="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-pmlastmsg" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-pmlastmsg" "$LINENO" 5 ;; esac else enable_pmlastmsg=no @@ -16266,7 +16141,7 @@ if test "${enable_pmcisconames+set}" = set; then : enableval=$enable_pmcisconames; case "${enableval}" in yes) enable_pmcisconames="yes" ;; no) enable_pmcisconames="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-pmcisconames" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-pmcisconames" "$LINENO" 5 ;; esac else enable_pmcisconames=no @@ -16289,7 +16164,7 @@ if test "${enable_pmaixforwardedfrom+set}" = set; then : enableval=$enable_pmaixforwardedfrom; case "${enableval}" in yes) enable_pmaixforwardedfrom="yes" ;; no) enable_pmaixforwardedfrom="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-pmaixforwardedfrom" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-pmaixforwardedfrom" "$LINENO" 5 ;; esac else enable_pmaixforwardedfrom=no @@ -16312,7 +16187,7 @@ if test "${enable_pmsnare+set}" = set; then : enableval=$enable_pmsnare; case "${enableval}" in yes) enable_pmsnare="yes" ;; no) enable_pmsnare="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-pmsnare" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-pmsnare" "$LINENO" 5 ;; esac else enable_pmsnare=no @@ -16335,7 +16210,7 @@ if test "${enable_pmrfc3164sd+set}" = set; then : enableval=$enable_pmrfc3164sd; case "${enableval}" in yes) enable_pmrfc3164sd="yes" ;; no) enable_pmrfc3164sd="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-pmrfc3164sd" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-pmrfc3164sd" "$LINENO" 5 ;; esac else enable_pmrfc3164sd=no @@ -16358,7 +16233,7 @@ if test "${enable_omruleset+set}" = set; then : enableval=$enable_omruleset; case "${enableval}" in yes) enable_omruleset="yes" ;; no) enable_omruleset="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-omruleset" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-omruleset" "$LINENO" 5 ;; esac else enable_omruleset=yes @@ -16381,7 +16256,7 @@ if test "${enable_omdbalerting+set}" = set; then : enableval=$enable_omdbalerting; case "${enableval}" in yes) enable_omdbalerting="yes" ;; no) enable_omdbalerting="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-omdbalerting" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-omdbalerting" "$LINENO" 5 ;; esac else enable_omdbalerting=no @@ -16405,7 +16280,7 @@ if test "${enable_gui+set}" = set; then : enableval=$enable_gui; case "${enableval}" in yes) enable_gui="yes" ;; no) enable_gui="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-gui" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-gui" "$LINENO" 5 ;; esac else enable_gui=no @@ -16436,7 +16311,7 @@ if test "${enable_omuxsock+set}" = set; then : enableval=$enable_omuxsock; case "${enableval}" in yes) enable_omuxsock="yes" ;; no) enable_omuxsock="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-omuxsock" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-omuxsock" "$LINENO" 5 ;; esac else enable_omuxsock=no @@ -16461,7 +16336,7 @@ if test "${enable_cust1+set}" = set; then : enableval=$enable_cust1; case "${enableval}" in yes) enable_cust1="yes" ;; no) enable_cust1="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-cust1" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-cust1" "$LINENO" 5 ;; esac else enable_cust1=no @@ -16485,7 +16360,7 @@ if test "${enable_smcustbindcdr+set}" = set; then : enableval=$enable_smcustbindcdr; case "${enableval}" in yes) enable_smcustbindcdr="yes" ;; no) enable_smcustbindcdr="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-smcustbindcdr" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-smcustbindcdr" "$LINENO" 5 ;; esac else enable_smcustbindcdr=no @@ -16510,7 +16385,7 @@ if test "${enable_imtemplate+set}" = set; then : enableval=$enable_imtemplate; case "${enableval}" in yes) enable_imtemplate="yes" ;; no) enable_imtemplate="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-imtemplate" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-imtemplate" "$LINENO" 5 ;; esac else enable_imtemplate=no @@ -16540,7 +16415,7 @@ if test "${enable_omtemplate+set}" = set; then : enableval=$enable_omtemplate; case "${enableval}" in yes) enable_omtemplate="yes" ;; no) enable_omtemplate="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-omtemplate" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-omtemplate" "$LINENO" 5 ;; esac else enable_omtemplate=no @@ -16568,7 +16443,7 @@ if test "${enable_mmsnmptrapd+set}" = set; then : enableval=$enable_mmsnmptrapd; case "${enableval}" in yes) enable_mmsnmptrapd="yes" ;; no) enable_mmsnmptrapd="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-mmsnmptrapd" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-mmsnmptrapd" "$LINENO" 5 ;; esac else enable_mmsnmptrapd=no @@ -16591,7 +16466,7 @@ if test "${enable_omhdfs+set}" = set; then : enableval=$enable_omhdfs; case "${enableval}" in yes) enable_omhdfs="yes" ;; no) enable_omhdfs="no" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-omhdfs" "$LINENO" 5 ;; + *) as_fn_error $? "bad value ${enableval} for --enable-omhdfs" "$LINENO" 5 ;; esac else enable_omhdfs=no @@ -17336,8 +17211,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by rsyslog $as_me 5.8.3, which was -generated by GNU Autoconf 2.66. Invocation command line was +This file was extended by rsyslog $as_me 5.8.4, which was +generated by GNU Autoconf 2.67. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -17402,8 +17277,8 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -rsyslog config.status 5.8.3 -configured by $0, generated by GNU Autoconf 2.66, +rsyslog config.status 5.8.4 +configured by $0, generated by GNU Autoconf 2.67, with options \\"\$ac_cs_config\\" Copyright (C) 2010 Free Software Foundation, Inc. @@ -17424,11 +17299,16 @@ ac_need_defaults=: while test $# != 0 do case $1 in - --*=*) + --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; *) ac_option=$1 ac_optarg=$2 @@ -17450,6 +17330,7 @@ do $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; @@ -17525,143 +17406,131 @@ AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' +macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' +macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' +pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' +host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' +host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' +host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' +build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' +build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' +build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' +SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' +Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' +GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' +EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' +FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' +LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' +NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' +LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' +ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' +exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' +lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' +reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' +AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' +STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' +RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' +compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' +GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' +SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' +ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' +need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' +LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' +libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' +version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' +runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' +libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' +soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' +old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' +striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - # Quote evaled strings. -for var in SHELL \ -ECHO \ -SED \ +for var in SED \ GREP \ EGREP \ FGREP \ @@ -17685,6 +17554,8 @@ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +SHELL \ +ECHO \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_wl \ lt_prog_compiler_pic \ @@ -17714,13 +17585,12 @@ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ -install_override_mode \ finish_eval \ old_striplib \ striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -17747,9 +17617,9 @@ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -17757,6 +17627,12 @@ sys_lib_dlsearch_path_spec; do esac done +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` + ;; +esac + ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' @@ -17834,7 +17710,7 @@ do "java/Makefile") CONFIG_FILES="$CONFIG_FILES java/Makefile" ;; "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;; esac done @@ -18150,7 +18026,7 @@ do esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -18178,7 +18054,7 @@ do [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" @@ -18205,7 +18081,7 @@ $as_echo "$as_me: creating $ac_file" >&6;} case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -18541,8 +18417,7 @@ $as_echo X"$file" | # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. +# 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. @@ -18590,12 +18465,6 @@ pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - # The host system. host_alias=$host_alias host=$host @@ -18645,6 +18514,10 @@ SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + # An object symbol dumper. OBJDUMP=$lt_OBJDUMP @@ -18666,9 +18539,6 @@ RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - # A C compiler. LTCC=$lt_CC @@ -18690,6 +18560,12 @@ global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name # The name of the directory that contains temporary libtool files. objdir=$objdir +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that does not interpret backslashes. +ECHO=$lt_ECHO + # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD @@ -18752,9 +18628,6 @@ library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds @@ -18794,10 +18667,6 @@ striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds @@ -19057,7 +18926,7 @@ _LT_EOF func_dirname () { # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else @@ -19068,7 +18937,7 @@ func_dirname () # func_basename file func_basename () { - func_basename_result=`$ECHO "${1}" | $SED "$basename"` + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } @@ -19081,8 +18950,10 @@ func_basename () func_stripname () { case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; esac } @@ -19093,20 +18964,20 @@ my_sed_long_arg='1s/^-[^=]*=//' # func_opt_split func_opt_split () { - func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` - func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` } # func_lo2o object func_lo2o () { - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` } # func_xform libobj-or-source func_xform () { - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` } # func_arith arithmetic-term... |