Imported from util-linux-2.12pre tarball.

1 files changed, 357 insertions, 358 deletions

diff --git a/po/cat-id-tbl.c b/po/cat-id-tbl.c
index 53e4eda8..9b1b03d3 100644
--- a/po/cat-id-tbl.c
+++ b/po/cat-id-tbl.c
@@ -2046,7 +2046,7 @@ mount: the kernel does not recognize %s as a block device\n\
   {"label", 1552},
   {"mount: no such partition found", 1553},
   {"mount: no type was given - I'll assume nfs because of the colon\n", 1554},
-  {"mount: no type was given - I'll assume smbfs because of the // prefix\n", 1555},
+  {"mount: no type was given - I'll assume smb because of the // prefix\n", 1555},
   {"mount: backgrounding \"%s\"\n", 1556},
   {"mount: giving up \"%s\"\n", 1557},
   {"mount: %s already mounted on %s\n", 1558},
@@ -2070,292 +2070,291 @@ or move a subtree:\n\
        mount --move olddir newdir\n\
 A device can be given by name, say /dev/hda1 or /dev/cdrom,\n\
 or by label, using  -L label  or by uuid, using  -U uuid .\n\
-Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n\
+Other options: [-nfFrsvw] [-o options].\n\
 For many more details, say  man 8 mount .\n", 1559},
-  {"mount: argument to -p or --pass-fd must be a number", 1560},
-  {"mount: only root can do that", 1561},
-  {"mount: no %s found - creating it..\n", 1562},
-  {"mount: the label %s occurs on both %s and %s - not mounted\n", 1563},
-  {"mount: mounting %s\n", 1564},
-  {"nothing was mounted", 1565},
-  {"mount: cannot find %s in %s", 1566},
-  {"mount: can't find %s in %s or %s", 1567},
-  {"\
-mount: could not open %s, so UUID and LABEL conversion cannot be done.\n", 1568},
-  {"mount: bad UUID", 1569},
-  {"mount: error while guessing filesystem type\n", 1570},
-  {"mount: you didn't specify a filesystem type for %s\n", 1571},
-  {"       I will try all types mentioned in %s or %s\n", 1572},
-  {"       and it looks like this is swapspace\n", 1573},
-  {"       I will try type %s\n", 1574},
-  {"Trying %s\n", 1575},
-  {"mount: excessively long host:dir argument\n", 1576},
-  {"mount: warning: multiple hostnames not supported\n", 1577},
-  {"mount: directory to mount not in host:dir format\n", 1578},
-  {"mount: can't get address for %s\n", 1579},
-  {"mount: got bad hp->h_length\n", 1580},
-  {"mount: excessively long option argument\n", 1581},
-  {"Warning: Unrecognized proto= option.\n", 1582},
-  {"Warning: Option namlen is not supported.\n", 1583},
-  {"unknown nfs mount parameter: %s=%d\n", 1584},
-  {"Warning: option nolock is not supported.\n", 1585},
-  {"unknown nfs mount option: %s%s\n", 1586},
-  {"mount: got bad hp->h_length?\n", 1587},
-  {"NFS over TCP is not supported.\n", 1588},
-  {"nfs socket", 1589},
-  {"nfs bindresvport", 1590},
-  {"nfs server reported service unavailable", 1591},
-  {"used portmapper to find NFS port\n", 1592},
-  {"using port %d for nfs deamon\n", 1593},
-  {"nfs connect", 1594},
-  {"unknown nfs status return value: %d", 1595},
-  {"bug in xstrndup call", 1596},
+  {"mount: only root can do that", 1560},
+  {"mount: no %s found - creating it..\n", 1561},
+  {"mount: the label %s occurs on both %s and %s - not mounted\n", 1562},
+  {"mount: mounting %s\n", 1563},
+  {"nothing was mounted", 1564},
+  {"mount: cannot find %s in %s", 1565},
+  {"mount: can't find %s in %s or %s", 1566},
+  {"\
+mount: could not open %s, so UUID and LABEL conversion cannot be done.\n", 1567},
+  {"mount: bad UUID", 1568},
+  {"mount: error while guessing filesystem type\n", 1569},
+  {"mount: you didn't specify a filesystem type for %s\n", 1570},
+  {"       I will try all types mentioned in %s or %s\n", 1571},
+  {"       and it looks like this is swapspace\n", 1572},
+  {"       I will try type %s\n", 1573},
+  {"Trying %s\n", 1574},
+  {"mount: excessively long host:dir argument\n", 1575},
+  {"mount: warning: multiple hostnames not supported\n", 1576},
+  {"mount: directory to mount not in host:dir format\n", 1577},
+  {"mount: can't get address for %s\n", 1578},
+  {"mount: got bad hp->h_length\n", 1579},
+  {"mount: excessively long option argument\n", 1580},
+  {"Warning: Unrecognized proto= option.\n", 1581},
+  {"Warning: Option namlen is not supported.\n", 1582},
+  {"unknown nfs mount parameter: %s=%d\n", 1583},
+  {"Warning: option nolock is not supported.\n", 1584},
+  {"unknown nfs mount option: %s%s\n", 1585},
+  {"mount: got bad hp->h_length?\n", 1586},
+  {"NFS over TCP is not supported.\n", 1587},
+  {"nfs socket", 1588},
+  {"nfs bindresvport", 1589},
+  {"nfs server reported service unavailable", 1590},
+  {"used portmapper to find NFS port\n", 1591},
+  {"using port %d for nfs deamon\n", 1592},
+  {"nfs connect", 1593},
+  {"unknown nfs status return value: %d", 1594},
+  {"bug in xstrndup call", 1595},
   {"\
 usage: %s [-hV]\n\
        %s -a [-e] [-v]\n\
        %s [-v] [-p priority] special ...\n\
-       %s [-s]\n", 1597},
+       %s [-s]\n", 1596},
   {"\
 usage: %s [-hV]\n\
        %s -a [-v]\n\
-       %s [-v] special ...\n", 1598},
-  {"%s on %s\n", 1599},
-  {"swapon: cannot stat %s: %s\n", 1600},
-  {"swapon: warning: %s has insecure permissions %04o, %04o suggested\n", 1601},
-  {"swapon: Skipping file %s - it appears to have holes.\n", 1602},
-  {"Not superuser.\n", 1603},
-  {"%s: cannot open %s: %s\n", 1604},
-  {"umount: compiled without support for -f\n", 1605},
-  {"host: %s, directory: %s\n", 1606},
-  {"umount: can't get address for %s\n", 1607},
-  {"umount: got bad hostp->h_length\n", 1608},
-  {"umount: %s: invalid block device", 1609},
-  {"umount: %s: not mounted", 1610},
-  {"umount: %s: can't write superblock", 1611},
-  {"umount: %s: device is busy", 1612},
-  {"umount: %s: not found", 1613},
-  {"umount: %s: must be superuser to umount", 1614},
-  {"umount: %s: block devices not permitted on fs", 1615},
-  {"umount: %s: %s", 1616},
-  {"no umount2, trying umount...\n", 1617},
-  {"could not umount %s - trying %s instead\n", 1618},
-  {"umount: %s busy - remounted read-only\n", 1619},
-  {"umount: could not remount %s read-only\n", 1620},
-  {"%s umounted\n", 1621},
-  {"umount: cannot find list of filesystems to unmount", 1622},
+       %s [-v] special ...\n", 1597},
+  {"%s on %s\n", 1598},
+  {"swapon: cannot stat %s: %s\n", 1599},
+  {"swapon: warning: %s has insecure permissions %04o, %04o suggested\n", 1600},
+  {"swapon: Skipping file %s - it appears to have holes.\n", 1601},
+  {"Not superuser.\n", 1602},
+  {"%s: cannot open %s: %s\n", 1603},
+  {"umount: compiled without support for -f\n", 1604},
+  {"host: %s, directory: %s\n", 1605},
+  {"umount: can't get address for %s\n", 1606},
+  {"umount: got bad hostp->h_length\n", 1607},
+  {"umount: %s: invalid block device", 1608},
+  {"umount: %s: not mounted", 1609},
+  {"umount: %s: can't write superblock", 1610},
+  {"umount: %s: device is busy", 1611},
+  {"umount: %s: not found", 1612},
+  {"umount: %s: must be superuser to umount", 1613},
+  {"umount: %s: block devices not permitted on fs", 1614},
+  {"umount: %s: %s", 1615},
+  {"no umount2, trying umount...\n", 1616},
+  {"could not umount %s - trying %s instead\n", 1617},
+  {"umount: %s busy - remounted read-only\n", 1618},
+  {"umount: could not remount %s read-only\n", 1619},
+  {"%s umounted\n", 1620},
+  {"umount: cannot find list of filesystems to unmount", 1621},
   {"\
 Usage: umount [-hV]\n\
        umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n\
-       umount [-f] [-r] [-n] [-v] special | node...\n", 1623},
-  {"Trying to umount %s\n", 1624},
-  {"Could not find %s in mtab\n", 1625},
-  {"umount: %s is not mounted (according to mtab)", 1626},
-  {"umount: it seems %s is mounted multiple times", 1627},
-  {"umount: %s is not in the fstab (and you are not root)", 1628},
-  {"umount: %s mount disagrees with the fstab", 1629},
-  {"umount: only root can unmount %s from %s", 1630},
-  {"umount: only root can do that", 1631},
-  {"You must be root to set the Ctrl-Alt-Del behaviour.\n", 1632},
-  {"Usage: ctrlaltdel hard|soft\n", 1633},
+       umount [-f] [-r] [-n] [-v] special | node...\n", 1622},
+  {"Trying to umount %s\n", 1623},
+  {"Could not find %s in mtab\n", 1624},
+  {"umount: %s is not mounted (according to mtab)", 1625},
+  {"umount: it seems %s is mounted multiple times", 1626},
+  {"umount: %s is not in the fstab (and you are not root)", 1627},
+  {"umount: %s mount disagrees with the fstab", 1628},
+  {"umount: only root can unmount %s from %s", 1629},
+  {"umount: only root can do that", 1630},
+  {"You must be root to set the Ctrl-Alt-Del behaviour.\n", 1631},
+  {"Usage: ctrlaltdel hard|soft\n", 1632},
   {"\
 File %s, For threshold value %lu, Maximum characters in fifo were %d,\n\
-and the maximum transfer rate in characters/second was %f\n", 1634},
+and the maximum transfer rate in characters/second was %f\n", 1633},
   {"\
 File %s, For threshold value %lu and timrout value %lu, Maximum characters \
 in fifo were %d,\n\
-and the maximum transfer rate in characters/second was %f\n", 1635},
-  {"Invalid interval value: %s\n", 1636},
-  {"Invalid set value: %s\n", 1637},
-  {"Invalid default value: %s\n", 1638},
-  {"Invalid set time value: %s\n", 1639},
-  {"Invalid default time value: %s\n", 1640},
+and the maximum transfer rate in characters/second was %f\n", 1634},
+  {"Invalid interval value: %s\n", 1635},
+  {"Invalid set value: %s\n", 1636},
+  {"Invalid default value: %s\n", 1637},
+  {"Invalid set time value: %s\n", 1638},
+  {"Invalid default time value: %s\n", 1639},
   {"\
 Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) \
-[-g|-G] file [file...]\n", 1641},
-  {"Can't open %s: %s\n", 1642},
-  {"Can't set %s to threshold %d: %s\n", 1643},
-  {"Can't set %s to time threshold %d: %s\n", 1644},
-  {"Can't get threshold for %s: %s\n", 1645},
-  {"Can't get timeout for %s: %s\n", 1646},
-  {"%s: %ld current threshold and %ld current timeout\n", 1647},
-  {"%s: %ld default threshold and %ld default timeout\n", 1648},
-  {"Can't set signal handler", 1649},
-  {"gettimeofday failed", 1650},
-  {"Can't issue CYGETMON on %s: %s\n", 1651},
-  {"\
-%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n", 1652},
-  {"   %f int/sec; %f rec, %f send (char/sec)\n", 1653},
-  {"\
-%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n", 1654},
-  {"   %f int/sec; %f rec (char/sec)\n", 1655},
-  {"Usage: %s [-c] [-n level] [-s bufsize]\n", 1656},
-  {"invalid id: %s\n", 1657},
-  {"cannot remove id %s (%s)\n", 1658},
-  {"deprecated usage: %s {shm | msg | sem} id ...\n", 1659},
-  {"unknown resource type: %s\n", 1660},
-  {"resource(s) deleted\n", 1661},
+[-g|-G] file [file...]\n", 1640},
+  {"Can't open %s: %s\n", 1641},
+  {"Can't set %s to threshold %d: %s\n", 1642},
+  {"Can't set %s to time threshold %d: %s\n", 1643},
+  {"Can't get threshold for %s: %s\n", 1644},
+  {"Can't get timeout for %s: %s\n", 1645},
+  {"%s: %ld current threshold and %ld current timeout\n", 1646},
+  {"%s: %ld default threshold and %ld default timeout\n", 1647},
+  {"Can't set signal handler", 1648},
+  {"gettimeofday failed", 1649},
+  {"Can't issue CYGETMON on %s: %s\n", 1650},
+  {"\
+%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n", 1651},
+  {"   %f int/sec; %f rec, %f send (char/sec)\n", 1652},
+  {"\
+%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n", 1653},
+  {"   %f int/sec; %f rec (char/sec)\n", 1654},
+  {"Usage: %s [-c] [-n level] [-s bufsize]\n", 1655},
+  {"invalid id: %s\n", 1656},
+  {"cannot remove id %s (%s)\n", 1657},
+  {"deprecated usage: %s {shm | msg | sem} id ...\n", 1658},
+  {"unknown resource type: %s\n", 1659},
+  {"resource(s) deleted\n", 1660},
   {"\
 usage: %s [ [-q msqid] [-m shmid] [-s semid]\n\
-          [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n", 1662},
-  {"%s: illegal option -- %c\n", 1663},
-  {"%s: illegal key (%s)\n", 1664},
-  {"permission denied for key", 1665},
-  {"already removed key", 1666},
-  {"invalid key", 1667},
-  {"unknown error in key", 1668},
-  {"permission denied for id", 1669},
-  {"invalid id", 1670},
-  {"already removed id", 1671},
-  {"unknown error in id", 1672},
-  {"%s: %s (%s)\n", 1673},
-  {"%s: unknown argument: %s\n", 1674},
-  {"usage : %s -asmq -tclup \n", 1675},
-  {"\t%s [-s -m -q] -i id\n", 1676},
-  {"\t%s -h for help.\n", 1677},
-  {"\
-%s provides information on ipc facilities for which you have read access.\n", 1678},
+          [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n", 1661},
+  {"%s: illegal option -- %c\n", 1662},
+  {"%s: illegal key (%s)\n", 1663},
+  {"permission denied for key", 1664},
+  {"already removed key", 1665},
+  {"invalid key", 1666},
+  {"unknown error in key", 1667},
+  {"permission denied for id", 1668},
+  {"invalid id", 1669},
+  {"already removed id", 1670},
+  {"unknown error in id", 1671},
+  {"%s: %s (%s)\n", 1672},
+  {"%s: unknown argument: %s\n", 1673},
+  {"usage : %s -asmq -tclup \n", 1674},
+  {"\t%s [-s -m -q] -i id\n", 1675},
+  {"\t%s -h for help.\n", 1676},
+  {"\
+%s provides information on ipc facilities for which you have read access.\n", 1677},
   {"\
 Resource Specification:\n\
 \t-m : shared_mem\n\
-\t-q : messages\n", 1679},
+\t-q : messages\n", 1678},
   {"\
 \t-s : semaphores\n\
-\t-a : all (default)\n", 1680},
+\t-a : all (default)\n", 1679},
   {"\
 Output Format:\n\
 \t-t : time\n\
 \t-p : pid\n\
-\t-c : creator\n", 1681},
+\t-c : creator\n", 1680},
   {"\
 \t-l : limits\n\
-\t-u : summary\n", 1682},
-  {"-i id [-s -q -m] : details on resource identified by id\n", 1683},
-  {"kernel not configured for shared memory\n", 1684},
-  {"------ Shared Memory Limits --------\n", 1685},
-  {"max number of segments = %ld\n", 1686},
-  {"max seg size (kbytes) = %ld\n", 1687},
-  {"max total shared memory (kbytes) = %ld\n", 1688},
-  {"min seg size (bytes) = %ld\n", 1689},
-  {"------ Shared Memory Status --------\n", 1690},
-  {"segments allocated %d\n", 1691},
-  {"pages allocated %ld\n", 1692},
-  {"pages resident  %ld\n", 1693},
-  {"pages swapped   %ld\n", 1694},
-  {"Swap performance: %ld attempts\t %ld successes\n", 1695},
-  {"------ Shared Memory Segment Creators/Owners --------\n", 1696},
-  {"%-10s %-10s %-10s %-10s %-10s %-10s\n", 1697},
-  {"shmid", 1698},
-  {"perms", 1699},
-  {"cuid", 1700},
-  {"cgid", 1701},
-  {"uid", 1702},
-  {"gid", 1703},
-  {"------ Shared Memory Attach/Detach/Change Times --------\n", 1704},
-  {"%-10s %-10s %-20s %-20s %-20s\n", 1705},
-  {"owner", 1706},
-  {"attached", 1707},
-  {"detached", 1708},
-  {"changed", 1709},
-  {"------ Shared Memory Creator/Last-op --------\n", 1710},
-  {"%-10s %-10s %-10s %-10s\n", 1711},
-  {"cpid", 1712},
-  {"lpid", 1713},
-  {"------ Shared Memory Segments --------\n", 1714},
-  {"%-10s %-10s %-10s %-10s %-10s %-10s %-12s\n", 1715},
-  {"key", 1716},
-  {"bytes", 1717},
-  {"nattch", 1718},
-  {"status", 1719},
-  {"Not set", 1720},
-  {"dest", 1721},
-  {"locked", 1722},
-  {"kernel not configured for semaphores\n", 1723},
-  {"------ Semaphore Limits --------\n", 1724},
-  {"max number of arrays = %d\n", 1725},
-  {"max semaphores per array = %d\n", 1726},
-  {"max semaphores system wide = %d\n", 1727},
-  {"max ops per semop call = %d\n", 1728},
-  {"semaphore max value = %d\n", 1729},
-  {"------ Semaphore Status --------\n", 1730},
-  {"used arrays = %d\n", 1731},
-  {"allocated semaphores = %d\n", 1732},
-  {"------ Semaphore Arrays Creators/Owners --------\n", 1733},
-  {"semid", 1734},
-  {"------ Shared Memory Operation/Change Times --------\n", 1735},
-  {"%-8s %-10s %-26.24s %-26.24s\n", 1736},
-  {"last-op", 1737},
-  {"last-changed", 1738},
-  {"------ Semaphore Arrays --------\n", 1739},
-  {"%-10s %-10s %-10s %-10s %-10s\n", 1740},
-  {"nsems", 1741},
-  {"kernel not configured for message queues\n", 1742},
-  {"------ Messages: Limits --------\n", 1743},
-  {"max queues system wide = %d\n", 1744},
-  {"max size of message (bytes) = %d\n", 1745},
-  {"default max size of queue (bytes) = %d\n", 1746},
-  {"------ Messages: Status --------\n", 1747},
-  {"allocated queues = %d\n", 1748},
-  {"used headers = %d\n", 1749},
-  {"used space = %d bytes\n", 1750},
-  {"------ Message Queues: Creators/Owners --------\n", 1751},
-  {"msqid", 1752},
-  {"------ Message Queues Send/Recv/Change Times --------\n", 1753},
-  {"%-8s %-10s %-20s %-20s %-20s\n", 1754},
-  {"send", 1755},
-  {"recv", 1756},
-  {"change", 1757},
-  {"------ Message Queues PIDs --------\n", 1758},
-  {"lspid", 1759},
-  {"lrpid", 1760},
-  {"------ Message Queues --------\n", 1761},
-  {"%-10s %-10s %-10s %-10s %-12s %-12s\n", 1762},
-  {"used-bytes", 1763},
-  {"messages", 1764},
+\t-u : summary\n", 1681},
+  {"-i id [-s -q -m] : details on resource identified by id\n", 1682},
+  {"kernel not configured for shared memory\n", 1683},
+  {"------ Shared Memory Limits --------\n", 1684},
+  {"max number of segments = %ld\n", 1685},
+  {"max seg size (kbytes) = %ld\n", 1686},
+  {"max total shared memory (kbytes) = %ld\n", 1687},
+  {"min seg size (bytes) = %ld\n", 1688},
+  {"------ Shared Memory Status --------\n", 1689},
+  {"segments allocated %d\n", 1690},
+  {"pages allocated %ld\n", 1691},
+  {"pages resident  %ld\n", 1692},
+  {"pages swapped   %ld\n", 1693},
+  {"Swap performance: %ld attempts\t %ld successes\n", 1694},
+  {"------ Shared Memory Segment Creators/Owners --------\n", 1695},
+  {"%-10s %-10s %-10s %-10s %-10s %-10s\n", 1696},
+  {"shmid", 1697},
+  {"perms", 1698},
+  {"cuid", 1699},
+  {"cgid", 1700},
+  {"uid", 1701},
+  {"gid", 1702},
+  {"------ Shared Memory Attach/Detach/Change Times --------\n", 1703},
+  {"%-10s %-10s %-20s %-20s %-20s\n", 1704},
+  {"owner", 1705},
+  {"attached", 1706},
+  {"detached", 1707},
+  {"changed", 1708},
+  {"------ Shared Memory Creator/Last-op --------\n", 1709},
+  {"%-10s %-10s %-10s %-10s\n", 1710},
+  {"cpid", 1711},
+  {"lpid", 1712},
+  {"------ Shared Memory Segments --------\n", 1713},
+  {"%-10s %-10s %-10s %-10s %-10s %-10s %-12s\n", 1714},
+  {"key", 1715},
+  {"bytes", 1716},
+  {"nattch", 1717},
+  {"status", 1718},
+  {"Not set", 1719},
+  {"dest", 1720},
+  {"locked", 1721},
+  {"kernel not configured for semaphores\n", 1722},
+  {"------ Semaphore Limits --------\n", 1723},
+  {"max number of arrays = %d\n", 1724},
+  {"max semaphores per array = %d\n", 1725},
+  {"max semaphores system wide = %d\n", 1726},
+  {"max ops per semop call = %d\n", 1727},
+  {"semaphore max value = %d\n", 1728},
+  {"------ Semaphore Status --------\n", 1729},
+  {"used arrays = %d\n", 1730},
+  {"allocated semaphores = %d\n", 1731},
+  {"------ Semaphore Arrays Creators/Owners --------\n", 1732},
+  {"semid", 1733},
+  {"------ Shared Memory Operation/Change Times --------\n", 1734},
+  {"%-8s %-10s %-26.24s %-26.24s\n", 1735},
+  {"last-op", 1736},
+  {"last-changed", 1737},
+  {"------ Semaphore Arrays --------\n", 1738},
+  {"%-10s %-10s %-10s %-10s %-10s\n", 1739},
+  {"nsems", 1740},
+  {"kernel not configured for message queues\n", 1741},
+  {"------ Messages: Limits --------\n", 1742},
+  {"max queues system wide = %d\n", 1743},
+  {"max size of message (bytes) = %d\n", 1744},
+  {"default max size of queue (bytes) = %d\n", 1745},
+  {"------ Messages: Status --------\n", 1746},
+  {"allocated queues = %d\n", 1747},
+  {"used headers = %d\n", 1748},
+  {"used space = %d bytes\n", 1749},
+  {"------ Message Queues: Creators/Owners --------\n", 1750},
+  {"msqid", 1751},
+  {"------ Message Queues Send/Recv/Change Times --------\n", 1752},
+  {"%-8s %-10s %-20s %-20s %-20s\n", 1753},
+  {"send", 1754},
+  {"recv", 1755},
+  {"change", 1756},
+  {"------ Message Queues PIDs --------\n", 1757},
+  {"lspid", 1758},
+  {"lrpid", 1759},
+  {"------ Message Queues --------\n", 1760},
+  {"%-10s %-10s %-10s %-10s %-12s %-12s\n", 1761},
+  {"used-bytes", 1762},
+  {"messages", 1763},
   {"\
 \n\
-Shared memory Segment shmid=%d\n", 1765},
-  {"uid=%d\tgid=%d\tcuid=%d\tcgid=%d\n", 1766},
-  {"mode=%#o\taccess_perms=%#o\n", 1767},
-  {"bytes=%ld\tlpid=%d\tcpid=%d\tnattch=%ld\n", 1768},
-  {"att_time=%-26.24s\n", 1769},
-  {"det_time=%-26.24s\n", 1770},
-  {"change_time=%-26.24s\n", 1771},
+Shared memory Segment shmid=%d\n", 1764},
+  {"uid=%d\tgid=%d\tcuid=%d\tcgid=%d\n", 1765},
+  {"mode=%#o\taccess_perms=%#o\n", 1766},
+  {"bytes=%ld\tlpid=%d\tcpid=%d\tnattch=%ld\n", 1767},
+  {"att_time=%-26.24s\n", 1768},
+  {"det_time=%-26.24s\n", 1769},
+  {"change_time=%-26.24s\n", 1770},
   {"\
 \n\
-Message Queue msqid=%d\n", 1772},
-  {"uid=%d\tgid=%d\tcuid=%d\tcgid=%d\tmode=%#o\n", 1773},
-  {"cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n", 1774},
-  {"send_time=%-26.24s\n", 1775},
-  {"rcv_time=%-26.24s\n", 1776},
+Message Queue msqid=%d\n", 1771},
+  {"uid=%d\tgid=%d\tcuid=%d\tcgid=%d\tmode=%#o\n", 1772},
+  {"cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n", 1773},
+  {"send_time=%-26.24s\n", 1774},
+  {"rcv_time=%-26.24s\n", 1775},
   {"\
 \n\
-Semaphore Array semid=%d\n", 1777},
-  {"uid=%d\t gid=%d\t cuid=%d\t cgid=%d\n", 1778},
-  {"mode=%#o, access_perms=%#o\n", 1779},
-  {"nsems = %ld\n", 1780},
-  {"otime = %-26.24s\n", 1781},
-  {"ctime = %-26.24s\n", 1782},
-  {"semnum", 1783},
-  {"value", 1784},
-  {"ncount", 1785},
-  {"zcount", 1786},
-  {"pid", 1787},
-  {"usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]", 1788},
-  {"\
-  rdev /dev/fd0  (or rdev /linux, etc.) displays the current ROOT device", 1789},
-  {"  rdev /dev/fd0 /dev/hda2         sets ROOT to /dev/hda2", 1790},
-  {"  rdev -R /dev/fd0 1              set the ROOTFLAGS (readonly status)", 1791},
-  {"  rdev -r /dev/fd0 627            set the RAMDISK size", 1792},
-  {"  rdev -v /dev/fd0 1              set the bootup VIDEOMODE", 1793},
-  {"  rdev -o N ...                   use the byte offset N", 1794},
-  {"  rootflags ...                   same as rdev -R", 1795},
-  {"  ramsize ...                     same as rdev -r", 1796},
-  {"  vidmode ...                     same as rdev -v", 1797},
-  {"\
-Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,...", 1798},
-  {"      use -R 1 to mount root readonly, -R 0 for read/write.", 1799},
-  {"missing comma", 1800},
-  {"out of memory", 1801},
+Semaphore Array semid=%d\n", 1776},
+  {"uid=%d\t gid=%d\t cuid=%d\t cgid=%d\n", 1777},
+  {"mode=%#o, access_perms=%#o\n", 1778},
+  {"nsems = %ld\n", 1779},
+  {"otime = %-26.24s\n", 1780},
+  {"ctime = %-26.24s\n", 1781},
+  {"semnum", 1782},
+  {"value", 1783},
+  {"ncount", 1784},
+  {"zcount", 1785},
+  {"pid", 1786},
+  {"usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]", 1787},
+  {"\
+  rdev /dev/fd0  (or rdev /linux, etc.) displays the current ROOT device", 1788},
+  {"  rdev /dev/fd0 /dev/hda2         sets ROOT to /dev/hda2", 1789},
+  {"  rdev -R /dev/fd0 1              set the ROOTFLAGS (readonly status)", 1790},
+  {"  rdev -r /dev/fd0 627            set the RAMDISK size", 1791},
+  {"  rdev -v /dev/fd0 1              set the bootup VIDEOMODE", 1792},
+  {"  rdev -o N ...                   use the byte offset N", 1793},
+  {"  rootflags ...                   same as rdev -R", 1794},
+  {"  ramsize ...                     same as rdev -r", 1795},
+  {"  vidmode ...                     same as rdev -v", 1796},
+  {"\
+Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,...", 1797},
+  {"      use -R 1 to mount root readonly, -R 0 for read/write.", 1798},
+  {"missing comma", 1799},
+  {"out of memory", 1800},
   {"\
 %s: Usage: \"%s [options]\n\
 \t -m <mapfile>  (defaults: \"%s\" and\n\
@@ -2368,76 +2367,76 @@ Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,...", 1
 \t -b            print individual histogram-bin counts\n\
 \t -r            reset all the counters (root only)\n\
 \t -n            disable byte order auto-detection\n\
-\t -V            print version and exit\n", 1802},
-  {"%s version %s\n", 1803},
-  {"Sampling_step: %i\n", 1804},
-  {"%s: %s(%i): wrong map line\n", 1805},
-  {"%s: can't find \"_stext\" in %s\n", 1806},
-  {"%s: profile address out of range. Wrong map file?\n", 1807},
-  {"total", 1808},
-  {"\
-usage: renice priority [ [ -p ] pids ] [ [ -g ] pgrps ] [ [ -u ] users ]\n", 1809},
-  {"renice: %s: unknown user\n", 1810},
-  {"renice: %s: bad value\n", 1811},
-  {"getpriority", 1812},
-  {"setpriority", 1813},
-  {"%d: old priority %d, new priority %d\n", 1814},
-  {"usage: %s program [arg ...]\n", 1815},
+\t -V            print version and exit\n", 1801},
+  {"%s version %s\n", 1802},
+  {"Sampling_step: %i\n", 1803},
+  {"%s: %s(%i): wrong map line\n", 1804},
+  {"%s: can't find \"_stext\" in %s\n", 1805},
+  {"%s: profile address out of range. Wrong map file?\n", 1806},
+  {"total", 1807},
+  {"\
+usage: renice priority [ [ -p ] pids ] [ [ -g ] pgrps ] [ [ -u ] users ]\n", 1808},
+  {"renice: %s: unknown user\n", 1809},
+  {"renice: %s: bad value\n", 1810},
+  {"getpriority", 1811},
+  {"setpriority", 1812},
+  {"%d: old priority %d, new priority %d\n", 1813},
+  {"usage: %s program [arg ...]\n", 1814},
   {"\
 Usage: %s <device> [ -i <IRQ> | -t <TIME> | -c <CHARS> | -w <WAIT> | \n\
           -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n\
-          -T [on|off] ]\n", 1816},
-  {"malloc error", 1817},
-  {"%s: bad value\n", 1818},
-  {"%s: %s not an lp device.\n", 1819},
-  {"%s status is %d", 1820},
-  {", busy", 1821},
-  {", ready", 1822},
-  {", out of paper", 1823},
-  {", on-line", 1824},
-  {", error", 1825},
-  {"LPGETIRQ error", 1826},
-  {"%s using IRQ %d\n", 1827},
-  {"%s using polling\n", 1828},
-  {"col: bad -l argument %s.\n", 1829},
-  {"usage: col [-bfpx] [-l nline]\n", 1830},
-  {"col: write error.\n", 1831},
-  {"col: warning: can't back up %s.\n", 1832},
-  {"past first line", 1833},
-  {"-- line already flushed", 1834},
-  {"usage: %s [ - ] [ -2 ] [ file ... ]\n", 1835},
-  {"line too long", 1836},
-  {"usage: column [-tx] [-c columns] [file ...]\n", 1837},
-  {"hexdump: bad length value.\n", 1838},
-  {"hexdump: bad skip value.\n", 1839},
-  {"\
-hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n", 1840},
-  {"usage: %s [-dflpcsu] [+linenum | +/pattern] name1 name2 ...\n", 1841},
+          -T [on|off] ]\n", 1815},
+  {"malloc error", 1816},
+  {"%s: bad value\n", 1817},
+  {"%s: %s not an lp device.\n", 1818},
+  {"%s status is %d", 1819},
+  {", busy", 1820},
+  {", ready", 1821},
+  {", out of paper", 1822},
+  {", on-line", 1823},
+  {", error", 1824},
+  {"LPGETIRQ error", 1825},
+  {"%s using IRQ %d\n", 1826},
+  {"%s using polling\n", 1827},
+  {"col: bad -l argument %s.\n", 1828},
+  {"usage: col [-bfpx] [-l nline]\n", 1829},
+  {"col: write error.\n", 1830},
+  {"col: warning: can't back up %s.\n", 1831},
+  {"past first line", 1832},
+  {"-- line already flushed", 1833},
+  {"usage: %s [ - ] [ -2 ] [ file ... ]\n", 1834},
+  {"line too long", 1835},
+  {"usage: column [-tx] [-c columns] [file ...]\n", 1836},
+  {"hexdump: bad length value.\n", 1837},
+  {"hexdump: bad skip value.\n", 1838},
+  {"\
+hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n", 1839},
+  {"usage: %s [-dflpcsu] [+linenum | +/pattern] name1 name2 ...\n", 1840},
   {"\
 \n\
 *** %s: directory ***\n\
-\n", 1842},
+\n", 1841},
   {"\
 \n\
 ******** %s: Not a text file ********\n\
-\n", 1843},
-  {"[Use q or Q to quit]", 1844},
-  {"--More--", 1845},
-  {"(Next file: %s)", 1846},
-  {"[Press space to continue, 'q' to quit.]", 1847},
-  {"...back %d pages", 1848},
-  {"...back 1 page", 1849},
-  {"...skipping one line", 1850},
-  {"...skipping %d lines", 1851},
+\n", 1842},
+  {"[Use q or Q to quit]", 1843},
+  {"--More--", 1844},
+  {"(Next file: %s)", 1845},
+  {"[Press space to continue, 'q' to quit.]", 1846},
+  {"...back %d pages", 1847},
+  {"...back 1 page", 1848},
+  {"...skipping one line", 1849},
+  {"...skipping %d lines", 1850},
   {"\
 \n\
 ***Back***\n\
-\n", 1852},
+\n", 1851},
   {"\
 \n\
 Most commands optionally preceded by integer argument k.  Defaults in \
 brackets.\n\
-Star (*) indicates argument becomes new default.\n", 1853},
+Star (*) indicates argument becomes new default.\n", 1852},
   {"\
 <space>                 Display next k lines of text [current screen size]\n\
 z                       Display next k lines of text [current screen size]*\n\
@@ -2457,63 +2456,63 @@ ctrl-L                  Redraw screen\n\
 :n                      Go to kth next file [1]\n\
 :p                      Go to kth previous file [1]\n\
 :f                      Display current file name and line number\n\
-.                       Repeat previous command\n", 1854},
-  {"[Press 'h' for instructions.]", 1855},
-  {"\"%s\" line %d", 1856},
-  {"[Not a file] line %d", 1857},
-  {"  Overflow\n", 1858},
-  {"...skipping\n", 1859},
-  {"Regular expression botch", 1860},
+.                       Repeat previous command\n", 1853},
+  {"[Press 'h' for instructions.]", 1854},
+  {"\"%s\" line %d", 1855},
+  {"[Not a file] line %d", 1856},
+  {"  Overflow\n", 1857},
+  {"...skipping\n", 1858},
+  {"Regular expression botch", 1859},
   {"\
 \n\
-Pattern not found\n", 1861},
-  {"Pattern not found", 1862},
-  {"can't fork\n", 1863},
+Pattern not found\n", 1860},
+  {"Pattern not found", 1861},
+  {"can't fork\n", 1862},
   {"\
 \n\
-...Skipping ", 1864},
-  {"...Skipping to file ", 1865},
-  {"...Skipping back to file ", 1866},
-  {"Line too long", 1867},
-  {"No previous command to substitute for", 1868},
-  {"od: od(1) has been deprecated for hexdump(1).\n", 1869},
-  {"od: hexdump(1) compatibility doesn't support the -%c option%s\n", 1870},
-  {"; see strings(1).", 1871},
-  {"hexdump: can't read %s.\n", 1872},
-  {"hexdump: line too long.\n", 1873},
-  {"hexdump: byte count with multiple conversion characters.\n", 1874},
-  {"hexdump: bad byte count for conversion character %s.\n", 1875},
-  {"hexdump: %%s requires a precision or a byte count.\n", 1876},
-  {"hexdump: bad format {%s}\n", 1877},
-  {"hexdump: bad conversion character %%%s.\n", 1878},
-  {"\
-%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n", 1879},
-  {"%s: option requires an argument -- %s\n", 1880},
-  {"%s: illegal option -- %s\n", 1881},
-  {"...skipping forward\n", 1882},
-  {"...skipping backward\n", 1883},
-  {"No next file", 1884},
-  {"No previous file", 1885},
-  {"%s: Read error from %s file\n", 1886},
-  {"%s: Unexpected EOF in %s file\n", 1887},
-  {"%s: Unknown error in %s file\n", 1888},
-  {"%s: Cannot create tempfile\n", 1889},
-  {"RE error: ", 1890},
-  {"(EOF)", 1891},
-  {"No remembered search string", 1892},
-  {"Cannot open ", 1893},
-  {"saved", 1894},
-  {": !command not allowed in rflag mode.\n", 1895},
-  {"fork() failed, try again later\n", 1896},
-  {"(Next file: ", 1897},
-  {"Unable to allocate bufferspace\n", 1898},
-  {"usage: rev [file ...]\n", 1899},
-  {"usage: %s [ -i ] [ -tTerm ] file...\n", 1900},
-  {"trouble reading terminfo", 1901},
-  {"Unknown escape sequence in input: %o, %o\n", 1902},
-  {"Unable to allocate buffer.\n", 1903},
-  {"Input line too long.\n", 1904},
-  {"Out of memory when growing buffer.\n", 1905},
+...Skipping ", 1863},
+  {"...Skipping to file ", 1864},
+  {"...Skipping back to file ", 1865},
+  {"Line too long", 1866},
+  {"No previous command to substitute for", 1867},
+  {"od: od(1) has been deprecated for hexdump(1).\n", 1868},
+  {"od: hexdump(1) compatibility doesn't support the -%c option%s\n", 1869},
+  {"; see strings(1).", 1870},
+  {"hexdump: can't read %s.\n", 1871},
+  {"hexdump: line too long.\n", 1872},
+  {"hexdump: byte count with multiple conversion characters.\n", 1873},
+  {"hexdump: bad byte count for conversion character %s.\n", 1874},
+  {"hexdump: %%s requires a precision or a byte count.\n", 1875},
+  {"hexdump: bad format {%s}\n", 1876},
+  {"hexdump: bad conversion character %%%s.\n", 1877},
+  {"\
+%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n", 1878},
+  {"%s: option requires an argument -- %s\n", 1879},
+  {"%s: illegal option -- %s\n", 1880},
+  {"...skipping forward\n", 1881},
+  {"...skipping backward\n", 1882},
+  {"No next file", 1883},
+  {"No previous file", 1884},
+  {"%s: Read error from %s file\n", 1885},
+  {"%s: Unexpected EOF in %s file\n", 1886},
+  {"%s: Unknown error in %s file\n", 1887},
+  {"%s: Cannot create tempfile\n", 1888},
+  {"RE error: ", 1889},
+  {"(EOF)", 1890},
+  {"No remembered search string", 1891},
+  {"Cannot open ", 1892},
+  {"saved", 1893},
+  {": !command not allowed in rflag mode.\n", 1894},
+  {"fork() failed, try again later\n", 1895},
+  {"(Next file: ", 1896},
+  {"Unable to allocate bufferspace\n", 1897},
+  {"usage: rev [file ...]\n", 1898},
+  {"usage: %s [ -i ] [ -tTerm ] file...\n", 1899},
+  {"trouble reading terminfo", 1900},
+  {"Unknown escape sequence in input: %o, %o\n", 1901},
+  {"Unable to allocate buffer.\n", 1902},
+  {"Input line too long.\n", 1903},
+  {"Out of memory when growing buffer.\n", 1904},
 };
 
-int _msg_tbl_length = 1905;
+int _msg_tbl_length = 1904;