diff options
Diffstat (limited to 'po/Makefile.in.in')
| -rw-r--r-- | po/Makefile.in.in | 100 |
1 files changed, 74 insertions, 26 deletions
diff --git a/po/Makefile.in.in b/po/Makefile.in.in index 7fadb882..53efc5e1 100644 --- a/po/Makefile.in.in +++ b/po/Makefile.in.in @@ -1,5 +1,5 @@ # Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper <drepper@gnu.ai.mit.edu> +# Copyright (C) 1995-1997, 2000-2004 by Ulrich Drepper <drepper@gnu.ai.mit.edu> # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU General Public @@ -7,6 +7,8 @@ # functionality. # Please note that the actual code of GNU gettext is covered by the GNU # General Public License and is *not* in the public domain. +# +# Origin: gettext-0.14 PACKAGE = @PACKAGE@ VERSION = @VERSION@ @@ -27,7 +29,7 @@ gettextsrcdir = $(datadir)/gettext/po INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ MKINSTALLDIRS = @MKINSTALLDIRS@ -mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac` +mkinstalldirs = $(SHELL) $(MKINSTALLDIRS) GMSGFMT = @GMSGFMT@ MSGFMT = @MSGFMT@ @@ -42,9 +44,9 @@ POFILES = @POFILES@ GMOFILES = @GMOFILES@ UPDATEPOFILES = @UPDATEPOFILES@ DUMMYPOFILES = @DUMMYPOFILES@ -DISTFILES.common = Makefile.in.in Makevars remove-potcdate.sin \ +DISTFILES.common = Makefile.in.in remove-potcdate.sin \ $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \ +DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \ $(POFILES) $(GMOFILES) \ $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) @@ -55,7 +57,7 @@ CATALOGS = @CATALOGS@ # Makevars gets inserted here. (Don't remove this line!) .SUFFIXES: -.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update +.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update .po.mo: @echo "$(MSGFMT) -c -o $@ $<"; \ @@ -64,8 +66,8 @@ CATALOGS = @CATALOGS@ .po.gmo: @lang=`echo $* | sed -e 's,.*/,,'`; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo " MSGFMT $${lang}.po"; \ - $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $(srcdir)/$${lang}.po && mv t-$${lang}.gmo $${lang}.gmo + echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ + cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo .sin.sed: sed -e '/^#/d' $< > t-$@ @@ -74,19 +76,35 @@ CATALOGS = @CATALOGS@ all: all-@USE_NLS@ -all-yes: $(CATALOGS) +all-yes: stamp-po all-no: +# stamp-po is a timestamp denoting the last time at which the CATALOGS have +# been loosely updated. Its purpose is that when a developer or translator +# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, +# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent +# invocations of "make" will do nothing. This timestamp would not be necessary +# if updating the $(CATALOGS) would always touch them; however, the rule for +# $(POFILES) has been designed to not touch files that don't need to be +# changed. +stamp-po: $(srcdir)/$(DOMAIN).pot + test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) + @echo "touch stamp-po" + @echo timestamp > stamp-poT + @mv stamp-poT stamp-po + # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', # otherwise packages like GCC can not be built if only parts of the source # have been downloaded. +# This target rebuilds $(DOMAIN).pot; it is an expensive operation. +# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ - --keyword=_ --keyword=N_ --keyword=P_:1,2 \ --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' + --copyright-holder='$(COPYRIGHT_HOLDER)' \ + --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)' test ! -f $(DOMAIN).po || { \ if test -f $(srcdir)/$(DOMAIN).pot; then \ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ @@ -102,25 +120,37 @@ $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed fi; \ } +# This rule has no dependencies: we don't need to update $(DOMAIN).pot at +# every "make" invocation, only create it when it is missing. +# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. $(srcdir)/$(DOMAIN).pot: $(MAKE) $(DOMAIN).pot-update +# This target rebuilds a PO file if $(DOMAIN).pot has changed. +# Note that a PO file is not touched if it doesn't need to be changed. $(POFILES): $(srcdir)/$(DOMAIN).pot @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo " MSGMERGE $${lang}.po"; \ - cd $(srcdir) && $(MSGMERGE_UPDATE) -q $${lang}.po $(DOMAIN).pot + if test -f "$(srcdir)/$${lang}.po"; then \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ + cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \ + else \ + $(MAKE) $${lang}.po-create; \ + fi install: install-exec install-data install-exec: install-data: install-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext"; then \ + if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common); do \ + for file in $(DISTFILES.common) Makevars.template; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ + for file in Makevars; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ else \ : ; \ fi @@ -171,7 +201,7 @@ install-strip: install installdirs: installdirs-exec installdirs-data installdirs-exec: installdirs-data: installdirs-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext"; then \ + if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ else \ : ; \ @@ -216,8 +246,8 @@ installcheck: uninstall: uninstall-exec uninstall-data uninstall-exec: uninstall-data: uninstall-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext"; then \ - for file in $(DISTFILES.common); do \ + if test "$(PACKAGE)" = "gettext-tools"; then \ + for file in $(DISTFILES.common) Makevars.template; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ @@ -236,10 +266,11 @@ uninstall-data-yes: check: all -dvi info tags TAGS ID: +info dvi ps pdf html tags TAGS ctags CTAGS ID: mostlyclean: - rm -f remove-potcdate.sed *.gmo + rm -f remove-potcdate.sed + rm -f stamp-poT rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po rm -fr *.o @@ -251,7 +282,7 @@ distclean: clean maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." - rm -f $(GMOFILES) + rm -f stamp-po $(GMOFILES) distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: @@ -260,7 +291,17 @@ dist distdir: # This is a separate target because 'update-po' must be executed before. dist2: $(DISTFILES) dists="$(DISTFILES)"; \ - if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \ + if test "$(PACKAGE)" = "gettext-tools"; then \ + dists="$$dists Makevars.template"; \ + fi; \ + if test -f $(srcdir)/ChangeLog; then \ + dists="$$dists ChangeLog"; \ + fi; \ + for i in 0 1 2 3 4 5 6 7 8 9; do \ + if test -f $(srcdir)/ChangeLog.$$i; then \ + dists="$$dists ChangeLog.$$i"; \ + fi; \ + done; \ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ for file in $$dists; do \ if test -f $$file; then \ @@ -272,18 +313,25 @@ dist2: $(DISTFILES) update-po: Makefile $(MAKE) $(DOMAIN).pot-update - $(MAKE) $(UPDATEPOFILES) + test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) $(MAKE) update-gmo +# General rule for creating PO files. + +.nop.po-create: + @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ + echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ + exit 1 + # General rule for updating PO files. .nop.po-update: @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \ + if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo " MSGMERGE $$lang.po"; \ + echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ cd $(srcdir); \ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ @@ -306,7 +354,7 @@ $(DUMMYPOFILES): update-gmo: Makefile $(GMOFILES) @: -Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in +Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@ cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \ $(SHELL) ./config.status |